Post on 26-Mar-2018
3X6 MARQUEE
Design Area
Safe Guide
ATTENTION
- Template ratio: 1 : 10
- Files to be supplied as vector PDF, AI, EPS.
- Files can be supplied at 100%, 50% or 25%. the correct proportions are important.
- Please ensure all logos and text are within the safe guide to prevent any cropping.
- Minimum font size - 30 pts.
- All text needs to be converted to paths/outlines.
- Logos should be imported/placed as vector and must be in CMYK / pantone.
- Photographic images should be supplied at 150 dpi at finished size.
- No bleed required.
- Other information required: Specific pantone colours*
*Tents are printed using CMYK dye sublimation. We will make every effort to match Pantone colours as close as possible.
5cm
10cm
5cm
20cm
65 cm
65 cm
608 cm
205 cm
205 cm
308 cm
300 cm
108 cm
108 cm
608 cm
45 cm
35 cm
612 cm
608 cm
184.5 cm
45 cm
35 cm
304 cm
307 cm
304 cm
186.6 cm
5cm
7cm
Full Wall
Half Wall
Font
Joined together line
Side Full Wall
Side Half Wall
Joined together line
Joined together lineJoined
together line
* If single sided printing, please indicate graphic face inside or outside.
1300 787 718www.printfocus.com.au