Post on 24-Nov-2021
@Conference collection
3rd Electronic and Green
Materials International
Conference 2017 (EGM 2017)Krabi, Thailand29-30 April 2017
Editors
Mohd. Mustafa Albakri Abdullah
Muhammad Mahyiddin Ramli
Shayfull Zamree Abd Rahim
Siti Salwa Mat Isa
Mohd Nasir Mat Saad
Rizalafande Che Ismail
Mohd Fathullah Ghazli
Universiti Malaysia Perlis, Perlis, Malaysia
Sponsoring OrganizationsMalaysia Research and Innovation Society (MyRIS)Center of Excellence Geopolymer and Green Technology, Universiti Malaysia Perlis
School of Microelectronic Engineering, Universiti Malaysia Perlis
All papers have been peer reviewed.
AIPPublishing
Melville, New York, 2017AIP Conference Proceedings Volume 1885 B
To learn more about AIP Conference Proceedings visit http://proceedings.aip.org
PART B
Feedstock for ruminant, non-ruminant and aquatic fish in Malaysia-A review
A. M. Leman, Syafiq Muzarpar, I. Baba, N. M Sunar, and R. Abdul Wahab 020155
Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels
using response surface methodology (RSM) and genetic algorithm (GA) optimisation approaches
M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and M. M. Rashidi 020156
Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels
using response surface methodology (RSM) and glowworm swarm optimisation (GSO)
M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and N. Zainal 020157
The development of mixer machine for organic animal feed production: Proposed study
A. M. Leman, R. Abdul Wahab, Supaat Zakaria, Dafit Feriyanto, M. I. F. Che Mohd Nor,
and Syafiq Muzarpar020158
Evaluation of tensile properties and water absortion of cassava starch film
R. Justin Walster, A. R. Rozyanty, A. W. M. Kahar, L. Musa, and S. B. S. Shahnaz 020159
Effect of growth times on the physical and mechanical properties of hydrophobic
and oleophilic silylated bacterial cellulose membranes
Zakaria M. N., Sukirah A. R., Maizatulnisa O., Ayuni J., Khalisanni K., and R. Rosmamuhamadani 020160
A comparison RSM and ANN surface roughness models in thin-wall machining ofTi6AI4V
using vegetable oils under MQL-condition
Amrifan Saladin Mohruni, Muhammad Yanis, Safian Sharif, Irsyadi Yani, Erna Yuliwati,
Ahmad Fauzi Ismail, and Zamree Shayfull 020161
Synergistic effect of nano calcium carbonate (NCC)/carbon black (CB) on the cure characteristics
and physico-mechanical properties of NR/SBR blends
Siti Nur Liyana Mamauod, Ahmad Zafir Romli, and Mohd Ismail Rifdi Rizuan 020162
Forecasting of primary energy consumption data in the United States: A comparison between ARIMA
and Holter-Winters models
A. Rahman and A. S. Ahmar 020163
The influence of synthesis routes and curing time on the mechanical and microstructure properties
of class C fly ash geopolymers
Kharisma Noor Aflfah, Nursyamsih Amalia, Syamsidar D., and Subaer 020164
Development of kenaf mat for slope stabilization
M. M. Ahmad, M. B. H. Ab Manaf, and N. Z. Zainol 020165
Elastic interactions between single microcrack and single osteon microstructure of human
femur cortical bone
N. N. Mansor, R. Daud, K. S. Basaruddin, F. Mat, Y. Bajuri, and A. K. Ariffin 020166
Convergence study of global meshing on enamel-cement-bracket finite element model
S. F. Samshuri, R. Daud, M. A. Rojan, K. S. Basaruddin, A. B. Abdullah, and A. K. Ariffin 020167
Effect of meshing element on J-integral value for homogenous crown fracture behavior
K. Khasnulhadi, R. Daud, F. Mat, K. S. Basaruddin, M. H. Sulaiman, and A. K. Ariffin 020168
Optimal injection process parameter analysis for front panel housing using response surface
methodology
N. A. Zakaria, M. Z. Azlan, Z. Shayfull, S. Roselina, and S. M. Nasir 020169
The relationship between Vickers microhardness and compressive strength of functional surface
geopolymers
Subaer, Januari Jaya Ekaputri, Hamzah Fansuri, and Mustafa Al Bakri Abdullah 020170
Potential of soil liquefaction at Perlis, northern region of Malalysia
Zuhayr Md Ghazaly, Mustaqqim Abdul Rahim, Mohamad Amzar Bin Mhd Nasir, Nur Fitriah Isa,
Mohd Faiz Mohammad Zaki, Zulkarnain Bin Hassan, and Zul-Atfi Bin Ismail
Design and development of a freezer and chiller delivery box
Mohd Zakimi Zakaria, Goh Chung Hung, Mohd Syedi Imran Mohd Dawi, Radhwan Hussin,
Ahmad Nabil Mohd Khalil, Muhammad Khairy Md Nairn, and Ahmad Humaizi Hilmi
Design reinforced concrete structures: Differences in procedure, formula, and results between
Eurocode 2 and British Standard 8110
Mustaqqim Abdul Rahim, Lum Chui Ying, Shahiron Shahidan, Zuhayr Md. Ghazaly,
Shamilah Anudai, Nor Faizah Bawadi, Nur Fitriah Isa, Zulkarnain Hassan,
Afifuddin Habulat, and Zul-Atfi Ismail
Influence of local meshing size on stress intensity factor of orthopedic lag screw
M. N. Husain, R. Daud, K. S. Basaruddin, F. Mat, M. Y. Bajuri, and A. K. Arifin
Warpage minimization: Analysis using response surface methodology (RSM) and particle
swarm optimization (PSO) on thin part
A. Yasiin, M. Fathullah, Z. Shayfull, S. M. Nasir, M. H. M. Hazwan, M. Sazli, and Z. R. Yahya
Cycle time improvement for plastic injection moulding process by sub groove modification
in conformal cooling channel
K. Kamarudin, M. S. Wahab, Batcha M. F. M., Z. Shayfull, A. A. Raus, and Aqeel Ahmed
Stress analysis of a single osteon
A. A. Ismail, R. Daud, N. A. M. Amin, M. S. Abdul Majid, K. S. Basaruddin, and A. K. Junoh
A comparative study ofAverrhoabilimbi extraction method
H. I. Zulhaimi, I. R. Rosli, K. F. Kasim, H. Muhammad Akmal, M. A. Nuradibah, and S. T. Sam
Comparison ofrelaxation with counterpressure massage techniques for reduce pain first stage
of labor
U. F. Lisa, M. Jalina, and Marniati
A representation model for developing double-sided assembly line balancing model: An industrial
case study
M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, and S. Zairi
Optimization of lactic acid production from glucose using geobacillus stearothermophilus strain 15
Balakrishnan Kunasundari, Sandrasekaran Naresh, and Mohammad Farhan Mohd Safie
Validation of XI motorcycle model in industrial plant layout by using WITNESS simulation
software
M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, W. J. Tan, and S. Zairi
Implementation of ranked positional weight method (RPWM) for double-sided assembly line
balancing problems
M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, and S. Zairi
Improving the accuracy of rainfall forecasting using multivariate transfer function and resilient
backpropagation neural network
S. Annas and R. Arisandi
SEIR model simulation for Hepatitis B
Syafruddin Side, Irwan, Usman Mulbar, and Wahidah Sanusi
Comparative evaluation of physicochemical properties of jatropha curcas seed oil for
coolant-lubricant application
Muhamad Nasir Murad, Safian Sharif, Erween Abd. Rahim, and Rozaini Abdullah
Mechanical properties effect on molarity of epoxy hardener filled with geopolymer materials
for piping application: Flexural properties
Mohammad Firdaus Abu Hashim, Mohd Mustafa Al Bakri Abdullah, Che Mohd Ruzaidi Ghazali,
Kamarudin Hussin, and Mohammed Binhussain
The influence of synthesis routes and curing time on the mechanical and microstructure properties
of class C fly ash geopolymers
Kharisma Noor Afifah, Nursyamsih Amalia, Syamsidar D., Abdul Haris, and Subaer
Convergence and stress analysis of the homogeneous structure of human femur bone during
standing up condition
B. Izzawati, R. Daud, M. Afendi, M. S. Abdul Majid, and N. A. M. Zain
Worksite element as causes of occupational accidents and illnesses in Malaysian residential
construction industry
J. Mohd Hafiidz, K. Arifln, K. Aiyub, M. R. Razman, M. S. Samsurijan, and M. I. Syakir
Chemical composition and strength of dolomite geopolymer composites
E. A. Aizat, A. M. M. Al Bakri, Y. M. Liew, and C. Y. Heah
Fabrication of microfluidic integrated biosensor
Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,
and Omar S. Dahham
Lab-on-chip components for molecular detection
Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,
and Omar S. Dahham
Drug carrier in cancer therapy: A simulation study based on magnetic carrier substances
Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,
and Omar S. Dahham
Specific and selective target detection of supra-genome 21 Mers Salmonella via silicon nanowires
biosensor
Mohammad Razif Bin Mustafa, Th S. Dhahi, Nuri. A. K. H. Ehfaed, Tijjani Adam, U. Hashim,N. Azizah, Mohammed Mohammed, and N. Z. Noriman
Synthesis of zinc oxide thin films prepared by sol-gel for specific bioactivity
Tijjani Adam, B. Basri, Th. S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,
and Omar S. Dahham 020197
SEIR model simulation for Hepatitis B
Syafruddin Side, Irwan, Usman Mulbar, and Wahidah Sanusi 020198
Overview of nanofluid application through minimum quantity lubrication (MQL) in metal cutting
process
Safian Sharif, Ibrahim Ogu Sadiq, Mohd Azlan Suhaimi, and Shayfull Zamree Abd Rahim 020199
Analysis on flexible manufacturing system layout using arena simulation software
M. K. Fadzly, Mohd Sazli Saad, and Z. Shayfull 020200
Study of the weathering effect in a natural environment on the hybrid kenaf bast/glass
fibre-filled unsaturated polyester composite
Mohammed Mohammed, A. R. Rozyanty, Tijjani Adam, and Bashir O. Betar 020201
Customer and performance rating in QFD using SVM classification
Syarizul Amri Dzulkifli, Mohd Najib Mohd Salleh, and A. M. Leman 020202
Effect on microstructure of nickel aluminum bronze by degassing addition
F. Syazwan, Kavinjr, S. Maghribi, N. Ashraf, A. Hadi, Z. Shayfull, and M. M. Rashidi 020203
Energy efficiency system development
A. M. Leman, K. A. Rahman, Haw Jie Chong, Mohd Najib Mohd Salleh, and M. Z. M. Yusof 020204
Speed limiter integrated fatigue analyzer (SLIFA) for speed and fatigue control on diesel engine
truck and bus
Haris Wahyudi, Hadi Pranoto, A. M. Leman, Darwin Sebayang, and I. Baba 020205
Reprogramming the articulated robotic arm for glass handling by using Arduino microcontroller
Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Mohd Asmadi Akmal Kadir,
and Mohd Hisam Daud 020206
Kinematics analysis on hinges of robot arm gripper for harmful chemical handling
Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Nurul Fahimah Mustafa,
and Mohd Hisam Daud 020207
Design and analysis on robotic arm for serving hazard container
Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Khoo Zera Yi, and Mohd Hisam Daud 020208
Design and analysis on sorting blade for automated size-based sorting device
Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Yasser Suhaimi Samsudin,
and Mohd Hisam Daud 020209
Performance analysis of single stage libr-water absorption machine operated by waste thermal
energy of internal combustion engine: Case study
Hafiz Zafar Sharif, A. M. Leman, Muthuraman S., Mohd Najib Mohd Salleh, and Supaat Zakaria 020210
Lattices parameter dependent on effective atomic interactive coefficient in nanostructure
Neesyan A/L David Rajah, Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim,
N. Z. Noriman, and Omar S. Dahham
Calculation of the band structure parameter in silicon nanowires using first principle analytical method
Mohamed Jamal Bin Amanullah, Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim,
N. Z. Noriman, and Omar S. Dahham
Warpage optimisation on thin shell part by using response surface methodology (RSM)
R. Norshahira, Z. Shayfull, S. M. Nasir, M. Fathullah, and M. H. M. Hazwan
Optimisation of warpage on thin shell part by using particle swarm optimisation (PSO)
R. Norshahira, Z. Shayfull, S. M. Nasir, S. M. Sazli Saad, and M. Fathullah
ZnO characterization, UV and photocatalysis mechanism for water repellent phenomena in polymer
poly composite
Mohammed Mohammed, A. R. Rozyanty, Tijjani Adam, and Bashir O. Betar
Optimization and validation of highly selective microfluidic integrated silicon nanowire chemical
sensor
Nuri. A KH Ehfaed, Shillan A. L. Bathmanathan, Th. S. Dhahi, Tijjani Adam, Uda Hashim,
and N. Z. Noriman
Warpage optimisation on the moulded part with straight-drilled and MGSS conformal cooling
channels using response surface methodology (RSM)
M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and M. M. Rashidi
The effect of silica toward polymer membrane for water separation process
Mohd Riduan Jamalludin, M. U. Rosli, Muhammad Ikman Ishak, C. Y. Khor, Suhaimi Shahrin,
Ras Izzati Ismail, Lailina N. M., Leng Y. L., and H. Jahidi
Performance of steel wool fiber reinforced geopolymer concrete
Meor Ahmad Faris, Mohd Mustafa Al Bakri Abdullah, Khairul Nizar Ismail, Ratnasamy Muniandy,
and Nurliayana Ariffln
Effect of degassing addition on the solidification segregation of nickel aluminum bronze
F. Syazwan, M. Kavinjr, S. Maghribi, N. Ashraf, A. Hadi, Z. Shayfull, and M. M. Rashidi
Rice husk (RH) as additive in fly ash based geopolymer mortar
Zarina Yahya, Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Mohd Azrin Adzhar Rahim,
and Armia Nasri
Effect of organo-montmorillonite addition on compressive properties of epoxy (DGEBA) using
isophorondiamine as curing agent
Yusrina Mat Daud, Kamarudin Hussin, Azlin Fazlina Osman, Che Mohd Ruzaidi Ghazali,and Mohd Mustafa Al Bakri Abdullah
Performance of fly ash based geopolymer incorporating palm kernel shell for lightweight concrete
Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Zarina Yahya, Ang Zhi Jian, and Armia Nasri
Correlation between hardness and water absorption properties of Saudi kaolin and white clay
geopolymer coating
Shamala Ramasamy, Mohd Mustafa Al Bakri Abdullah, Yue Huang, Kamarudin Hussin, Jin Wang,and Noor Fifmatasha Shahedan 020224
Composition, physical properties and drying characteristics of seed oil of Citrullus lanatus
S. A. Idris, A. R. Rashidi, A. Muhammad, M. Abdullah, O. S. J. Elham, and M. S. Mamat 020225
Different carbonization process of bamboo charcoal using Gigantochloa Albociliata
S. S. M. Isa, M. M. Ramli, D. S. C. Halin, N. A. M. Anhar, and N. A. M. A. Hambali 020226
Graphitization of oil palm trunk chip with controlled heating condition
N. A. Karim, C. M. R. Ghazali, M. M. Ramli, D. S. C. Halin, and I. Nainggolan 020227
Reduced-graphene oxide in flexible substrate for wearable physiological sensor - A review
N. A. M. Anhar, M. M. Ramli, D. S. C. Halin, S. S. M. Isa, N. A. M. A. Hambali,
and M. M. A. B. Abdullah 020228
Morphology-Property relationship of high density Polyethylene/Hevea Brasiliensis Leaves/Imperata
cylindrica hybrid composite: Impact strength
A. R. Rashidi, A. Muhammad, and A. Roslan 020229
Development of bio based plastic materials for packaging from soybeans waste
A. Muhammad, A. R. Rashidi, A. Roslan, and S. A. Idris 020230
Ethanolic extract of propolis for biodegradable films packaging enhanced with chitosan
M. I. Ismail, A. Roslan, N. S. Saari, K. H. Hashim, and M. R. Kalamullah 020231
Information fusion of palmprint image for human identification
S. N. W. M. Zuki, M. I. Ahmad, M. N. M. Isa, and R. Ngadiran 020232
Evaluation of mirror full adder circuit reliability performance due to negative bias temperature
instability (NBTI) effects based on different defect mechanisms
I. B. Shaari, M. F. Zainudin, M. S. A. Saini, H. Hussin, and A. K. Halim 020233
La0 6Sr0 4Co0 2Fe0 803_5 (LSCF64) perovskite nanotubes via sol-gel template synthesis
A. S. Habiballah, I. Ismail, N. Osman, and A. M. M. Jani 020234
Electrical DNA biosensor using aluminium interdigitated electrode for E.Coli 0157:H7 detection
N. Z. Natasha, R. D. A. A. Rajapaksha, M. N. A. Uda, and U. Hashim 020235
Ultra-low current biosensor output detection using portable electronic reader
N. A. N. Yahaya, R. D. A. A. Rajapaksha, M. N. Afnan Uda, and U. Hashim 020236
Design and fabricate multi channel microfluidic mold on top of glass slide using SU-8
N. A. N. Azman, R. D. A. A. Rajapaksha, M. N. A. Uda, and U. Hashim 020237
Optimized smith waterman processor design for breast cancer early diagnosis
D. S. Nurdin, M. N. Isa, R. C. Ismail, and M. I. Ahmad 020238
Simulation of unipolar planar device with asymmetrical barrier profile: A planar barrier diode
Z. Zailan, S. R. Kasjoo, N. Fa Zakaria, M. M. Isa, M. K. M. Arshad, and S. Taking
Comparison of encryption techniques between chaos theory and password for wireless power
transfer system: A review
N. H. Hussin, M. M. Azizan, A. Ali, and M. A. M. Albreem
Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX
Z. Syafiqah, N. A. M. Amin, Y. M. Irwan, M. Irwanto, W. Z. Leow, and A. R. Amelia
The security energy encryption in wireless power transfer
M. N. Sadzali, A. Ali, M. M. Azizan, and M. A. M. Albreem
Colloids removal from water resources using natural coagulant: Acacia auriculiformisM. Abdullah, A. Roslan, M. F. H. Kamarulzaman, and M. M. Erat
Graft copolymerization of acrylonitrile onto recycled newspapers cellulose pulp
N. A. Awang, W. N. W. Salleh, H. Hasbullah, N. Yusof, F. Aziz, J. Jaafar, and A. F. Ismail
Potential of roselle and blue pea in the dye-sensitized solar cell
S. Dayang, M. Irwanto, N. Gomesh, and B. Ismail
Biogas production from pineapple core - A preliminary study
O. S. Jehan, S. N. A. Sanusi, M. Z. Sukor, M. Noraini, M. M. H. S. Buddin, and K. H. K. Hamid
The effect of isocyanate structure on ionic conductivity of waste cooking oil based polyurethane
solid polymer electrolyte
N. A. Kamarulzaman and S. M. Tahir
Design of aquaponics water monitoring system using Arduino microcontroller
S. A. Z. Murad, A. Harun, S. N. Mohyar, R. Sapawi, and S. Y. Ten
Design of 5 V DC to 20 V DC switching regulator for power supply module
N. A. Azmi, S. A. Z. Murad, A. Harun, R. C. Ismail, M. N. M. Isa, and M. A. Zulkifeli
Single lump breast surface stress assessment study
R. Vairavan, N. R. Ong, Z. Sauli, S. Kirtsaeng, S. Sakuntasathien, P. Paitong, J. B. Alcain, S. L. Lai,
and V. Retnasamy
Fringe projection application for surface variation analysis on helical shaped silicon breast
R. Vairavan, N. R. Ong, Z. Sauli, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain,
P. Paitong, and V. Retnasamy
3D silicon breast surface mapping via structured light profilometry
R. Vairavan, N. R. Ong, Z. Sauli, S. Kirtsaeng, S. Sakuntasathien, M. M. Shahimin, J. B. Alcain,S. L. Lai, P. Paitong, and V Retnasamy
Heat dissipation investigation of the internal heat sink geometry of a commercial available LED lampS. L. Lai, N. R. Ong, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, Z. Sauli, K. Thangsi,and V. Retnasamy
Thermal study of LED chip arrangement on MCPCB
S. L. Lai, N. R. Ong, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, R. Vairavan,
Z. Sauli, K. Thangsi, and V. Retnasamy 020254
LED heat dissipation study of selected shape of MCPCB
S. L. Lai, N. R. Ong, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, R. Vairavan,
Z. Sauli, K. Thangsi, and V. Retnasamy 020255
Die attach dimension and material on thermal conductivity study for high power COB LED
K. Sarukunaselan, N. R. Ong, Z. Sauli, N. Mahmed, S. Kirtsaeng, S. Sakuntasathien, S. Suppiah,
J. B. Alcain, and V. Retnasamy 020256
An overview of self-switching diode rectifiers using green materials
Shahrir Rizal Kasjoo, Zarimawaty Zailan, Nor Farhani Zakaria, Muammar Mohamad Isa,
Mohd Khairuddin Md Arshad, and Sanna Taking 020257
The production of Malaysia bamboo charcoal (Gigantochloa albociliata) as the potential absorbent
Siti S. Mat Isa, Muhammad M. Ramli, N. A. M. A. Hambali, M. M. A. B. Abdullah,
and S. A. Z. Murad 020258
Single wall carbon nanotubes dispersion study of different dye molecules and chitosan
Muhammad M. Ramli, Siti S. Mat Isa, M. M. A. B. Abdullah, and S. A. Z. Murad 020259
Characterization analysis for leaves of Leucaena leucocephala by using phytochemical screening assay
Z. Zarina, C. M. R. Ghazali, and S. T. Sam 020260
Study of double porous silicon surfaces for enhancement of silicon solar cell performance
N. S. M. Razali, A. F. A. Rahim, R. Radzali, and A. Mahmood 020261
Thermal conductivity on stud bump interconnection of high power COB LED
K. Sarukunaselan, N. R. Ong, Z. Sauli, N. Mahmed, S. Kirtsaeng, S. Sakuntasathien, S. Suppiah,
J. B. Alcain, and V. Retnasamy 020262
A review: Application of adhesive bonding on semiconductor interconnection joints
Sarveshvaran Suppiah, Nestor Rubio Ong, Zaliman Sauli, Karunavani Sarukunaselan,
Jesselyn Barro Alcain, Mukhzeer Mohamad Shahimin, and Vithyacharan Retnasamy 020263
A review on solder reflow and flux application for flip chip
Sarveshvaran Suppiah, Nestor Rubio Ong, Zaliman Sauli, Karunavani Sarukunaselan,
Jesselyn Barro Alcain, Susthitha Menon Visvanathan, and Vithyacharan Retnasamy 020264
A crunch on thermocompression flip chip bonding
Sarveshvaran Suppiah, Nestor Rubio Ong, Zaliman Sauli, Karunavani Sarukunaselan,
Jesselyn Barro Alcain, Norsuria Mahmed, and Vithyacharan Retnasamy 020265
A short review on thermosonic flip chip bonding
Sarveshvaran Suppiah, Nestor Rubio Ong, Zaliman Sauli, Karunavani Sarukunaselan,
Jesselyn Barro Alcain, Mukhzeer Mohamad Shahimin, and Vithyacharan Retnasamy 020266
Decolourization of methyl orange using iron- immobilize MKSF in UV assisted Fenton-like
reaction
N. H. Abdullah, N. A. Zubir, and H. Hassan
Process parameter and surface morphology of pineapple leaf electrospun nanofibers (PALF)
S. N. Surip, F. M. A. Aziz, N. N. Bonnia, K. A. Sekak, and M. N. Zakaria
Effect of metal ratio and calcination temperature of chromium based mixed oxides catalyst
on FAME density from palm fatty acid distillate
Z. Wan, S. Fatimah, S. Shahar, and A. C. Noor
Circuit development of FGMOS in operational amplifier for low voltage low power applications:
A review
F. A. S. Musa, D. Nurulain, N. Ahmad, M. Mohamad Isa, and Muhammad M. Ramli
Effect of calcination temperature on the structure and catalytic performance of 80Ni20CO/SiO2
catalyst for COz methanation
S. A. Md Ali, K. H. K. Hamid, and K. N. Ismail
Modelling of fluoride removal via batch monopolar electrocoagulation process using aluminium
electrodes
N. Amri, M. I. Hashim, N. Ismail, F. S. Rohman, and N. A. A. Bashah
Multi-bit per cell magnetic random access memory based on spin torque oscillator
Rachid Sbiaa
Ergonomics study on mobile phones for thumb physiology discomfort
J. M. S. Bendero, M. E. R. Doon, K. C. A. Quiogue, L. C. Soneja, N. R. Ong, Z. Sauli,
and R. Vairavan
Interdigitated electrodes as impedance and capacitance biosensors: A review
N. S. Mazlan, M. M. Ramli, M. M. A. B. Abdullah, D. S. C. Halin, S. S. M. Isa, L. F. A. Talip,
N. S. Danial, and S. A. Z. Murad
Analysis of sulfidic linkages formed in natural rubber latex medical gloves by using X-ray
absorption near edge structure
M. Chankrachang, W. Limphirat, R Yongyingsakthavorn, U. Nontakaew, and A. Tohsan
Design of robotic leg and physiotherapy (ROLEP) assist with interactive game
A. F. Hasan, M. F. Che Husin, M. N. Hashim, K. A. Rosli, F. R. A. Roslim, and A. F. Z. Abidin
Microvalve-based microfluidic device for C. elegans manipulationS. Johari, V. Nock, M. M. Alkaisi, and W. Wang
The heating effect on different light emitting diodes chips materials
K. K. Chu, N. A. M. A. Hambali, S. N. Ariffin, M. H. A. Wahid, M. M. Shahimin,and Norshamsuri Ali
Role of temperature on colloidal behavior of gold nanoparticles dispersed in organic and aqueous
media
N. A. A. Bashah, E. Awel, N. Amri, R. Alrozi, N. Yaakob, N. A. Zubir, and M. S. Osman 020281
Qualitative comparison of active compounds between red and green Mariposa Christia
Vespertillonis leaves extracts
M. S. Osman, Z. A. Ghani, N. F. Ismail, N. A. A. Razak, J. Jaapar, and M. A. M. Ariff 020282
Studies on the uniformity and hexagonality of anodic aluminum oxide by image analysis methods
K. Khowamnuaychok, C. Luangchaisri, I. Chatnuntawech, and C. Muangphat 020283
Emission rate and internal quantum efficiency enhancement in different geometrical shapes
of GaN LED
S. Rashid, M. H. A. Wahid, N. A. M. Ahmad Hambali, N. S. A. Abdul Halim, M. M. Ramli,
and M. M. Shahimin 020284
P-type surface effects for thickness variation of 2um and 4um of n-type layer in GaN LED
N. S. A. Abdul Halim, M. H. A. Wahid, N. A. M. Ahmad Hambali, S. Rashid, M. M. Ramli,
and M. M. Shahimin 020285
Review of mixer design for low voltage - low power applications
D. Nurulain, F. A. S. Musa, M. Mohamad Isa, N. Ahmad, and S. R. Kasjoo 020286
Design of anti-theft/cable cut real time alert system for copper cable using microcontroller
and GSM technology
E. K. Lim, M. N. Norizan, I. S. Mohamad, M. N. M. Yasin, S. A. Z. Murad, N. A. Baharum,
and N. Jamalullail 020287
Simple Monte Carlo model with generalized carrier-trajectory tracking equations for prediction
of avalanche multiplication statistics in avalanche photodiodes with arbitrary electric field gradient
J. S. L. Ong, C. Charin, and J. H. Leong 020288
Microstructure modification and oxygen mobility of CeZr02 nanocrystal doped with Y and Fe metals
A. Hadi, M. N. A. Shah, K. N. Ismail, and A. B. Roslan 020289
Barium strontium titanate (BST) thin film analysis on different layer and annealing temperature
Y. C. Teh, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy 020290
Ceramic ball grid array package stress analysis
S. H. B. S. Badri, M. H. A. Aziz, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy 020291
Failure analysis on false call probe pins of microprocessor test equipment
L. W. Tang, N. R. Ong, I. S. B. Mohamad, J. B. Alcain, and V. Retnasamy 020292
Variation in heat sink shape for thermal analysis
C. M. Wong, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and Z. Sauli 020293
Investigation of heat transfer on surface mount packages for different chip materials
N. Ramdzan, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and Z. Sauli 020294
Mechanical harmonic effects investigation on wire bonding for adhesion integrity
M. H. Yeap, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy
PCBA depaneling stress minimization study
M. H. B. M. Darus, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and V. Retnasamy
Test module development to detect the flase call probe pins on microeprocessor test equipment
L. W. Tang, N. R. Ong, I. S. B. Mohamad, J. B. Alcain, and V. Retnasamy
Dielectrophoretic separation of platelets for medical application
N. S. Ismail, N. R. Ong, M. H. A. Aziz, J. B. Alcai, and Z. Sauli
Investigation of micropump mechanism for medical application (blood transport application)
N. S. M. Piterah, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Modelling of gecko foot for future robot application
A. Kamaruddin, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Modelling of cantilever based on piezoelectric energy harvester
N. F. Rahim, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Portable water quality monitoring system
N. B. Nizar, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
TCAD in CTF parameter study of SOI tunnelling FET using full factorial design
A. X. Teh, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Thermal microactuator dimension analysis
N. D. Azman, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Underwater detection by using ultrasonic sensor
S. A. A. Bakar, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli
Mitigation of landslide area around railway tunnel, South Sumatra Province, Indonesia
M. Taufik Toha, Dedi Setiabudidaya, Syamsul Komar, Bochori, Moamar A. Ghadafi,
Mirza Adiwarman, and S. E. Rahim
Growth and yield of rice submergence stress conditions in two types of swampy lowland
of South Sumatera
Gribaldi, Nurlaili, E. Danial, and S. E. Rahim
The decrease of cylindrical pempek quality during boiling
R. Kameta and N. F. Gultom
Nutrient uptake of NPK and result of some rice varieties in tidal land by using combination
of organic and inorganic fertilizer
Neni Marlina, Joni Phillep Rompas, Marlina, and Musbik
Infection of some cayenne pepper varieties (Capsicum frustescens L.) by Tobacco mosaic virus
at different growth stages
N. Damiri, I. S. Sofita, T. A. Effend, and S. E. Rahim 020310
Designing algorithm visualization on mobile platform: The proposed guidelines
A. A. Supli and N. Shiratuddin 020311
Suitability evaluation tool for lands (rice, corn and soybean) as mobile application
S. E. Rahim, A. A. Supli, and N. Damiri 020312