Post on 16-Apr-2018
3
Electronic Solutions Divisionhttp://www.3Mconnectors.com
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ IDC Ribbon Cable Socket.100” × .100” for .050” Pitch Cable 891 Series
• Preassembled, packaging on swords for easy loading of manual and semi-automatic assembly equipment
• “Bumps” are designed to prevent premature latch locking during shipment
• Optional double-sided adhesive pull tab for easy unplugging
• Double-recessed cover for cable terminating from either side virtually eliminating the need for single-recessed cover connectors
• Military polarization, with or without centerbump• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply)
Date Modified: July 18, 2012 TS-0449-L Sheet 1 of 3
Insulation:Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0Color: Gray
Contact:Material: Phosphor BronzePlating:
Underplating: 50μ”[1.27μm]NickelWiping Area: 30μ”[0.76μm]Gold
Wire Accommodation: 26and28AWGStrandedMarking: 3M Logo and Orientation Triangle
Current Rating: 1 line 6AdjacentLines All Lines28AWG 4.25 1.75 1.2526AWG 4.50 2.25 1.50RatingConditions:EIA-364-070Method2,30°Cmaximumtemperaturerise,20%derated.Referenceappropriate3MProductSpecificationfordetailedcurrentderating curves.
Insulation Resistance: > 1 × 109 Ω at 500 VDC
Withstanding Voltage: 1,000 VRMS at Sea Level
Temperature Rating: -55°Cto+105°C
ULFileNo.:E68080
3
Electronic Solutions Divisionhttp://www.3Mconnectors.com
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ IDC Ribbon Cable Socket.100” × .100” for .050” Pitch Cable 891 Series
TS-0449-L Sheet 2 of 3
Contact Quantity
DimensionsA B
8 0.58 [ 14.7 ] 0.43 [ 10.9 ]10 0.68 [ 17.3 ] 0.53 [ 13.5 ]14 0.88 [ 22.4 ] 0.73 [ 18.5 ]16 0.98 [ 24.9 ] 0.83 [ 21.1 ]20 1.18 [ 30.0 ] 1.03 [ 26.2 ]24 1.38 [ 35.1 ] 1.23 [ 31.2 ]26 1.48 [ 37.6 ] 1.33 [ 33.8 ]30 1.68 [ 42.7 ] 1.53 [ 38.9 ]34 1.88 [ 47.8 ] 1.73 [ 43.9 ]36 1.98 [ 50.3 ] 1.83 [ 46.5 ]40 2.18 [ 55.4 ] 2.03 [ 51.6 ]44 2.38 [ 60.5 ] 2.23 [ 56.4 ]50 2.68 [ 68.1 ] 2.53 [ 64.3 ]60 3.18 [ 80.8 ] 3.03 [ 77.0 ]
Inch(mm)
± .005± .1 ± .01
Tolerance Unless Noted.0 .00 .000
Inch[ ] Dimensions for
Reference only
C
Contact QuantitySee Table
Package Style Options:0 = Preassembled
Polarization Options:0 = Without Centerbump1 = With Centerbump
Strain Relief(Order Separately)
3448-891XX
Assembly tools: 3M™ Press (or equivalent) 3640 , 3M™ Locator Plate 3443-107N, 3M™ Platen 3442-9.
Pull Tabs(Order Separately)
See TS-0496
Top View of Cover
Bottom View of Body
.240[ 6.10 ]
.22[ 5.6]
.15[ 3.8 ]
A
Strain Relief
.53[ 13.5 ]
A.240
[ 6.10 ]
B
Recessed forCable Exit
.53[ 13.5 ]
.200[ 5.08 ]
.14[ 3.6 ].032
[ 0.81 ]TriangleIndicatesPosition 1 Dual Polarization
Slots
Position 1
.240[ 6.10 ]
Position 2.100
[ 2.54 ]Typ
.11[ 2.8 ]
.032[ 0.81 ]
.026[ 0.66 ]
.24[ 6.1 ]
.051[ 1.30 ]
B
Color: Gray
BreakawayTab
Assembled Height Without Strain Relief
.42 Ref[ 10.7 ]
.64 Ref[ 16.3 ]
.57 Ref[ 14.5 ]
Assembled Height with Standard Plastic Strain Relief
3435
.100 Typ[ 2.54 ]
.06 Centerbump[ 1.5 ] (Optional)
3435-0Keying Plug
(Optional: Order Separately)
No left slot on 10 & 14 positionNo slots on 8 position
Material: Gray Polyester (PBT)
Preassembled View
1 = No Strain Relief3 = Strain Relief
Contact Quantity:See Table
Ordering InformationSockets
891XX-0X0X
3
Electronic Solutions Divisionhttp://www.3Mconnectors.com
3M is a trademark of 3M Company.For technical, sales or ordering information call
800-225-5373
3M™ IDC Ribbon Cable Socket.100” × .100” for .050” Pitch Cable 891 Series
TS-0449-L Sheet 3 of 3
.30 Min[7.6]
.30 Min[7.6]
.100[2.54]
.20 Min[5.1]
.14[3.6]
- B -
Space for Cable Exit
Space Occupied by Socket
.025 ± .001 [0.64] Square or Round Typ (See Note 1)
.025 A B
.018 Max[0.46]
.230 Min[5.84]
Typ
.100[2.54]
See Note 2
Typ
Typ- A -
Recommended Post PatternRecommended Post Pattern for Stacked Configurations
Note 1: Measured at tip.
Note 2: Tapered pin tip configuration recommended.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completenessis not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associatedwith such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase ordershall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Please recycle. Printed in USA.© 3M 2012. All rights reserved.RIA-2217B-E
3
3M Electronics Solutions Division6801 River Place Blvd.Austin, TX 78726-9000U.S.A.1-800-225-5373www.3Mconnectors.com 3M is a trademark of 3M Company.