Post on 29-Oct-2019
273 / 274 Einnadel-Doppelsteppstichmaschinen mit Walzenobertransport
Single needle lockstitch machines with top puller feed
DÜRKOPP ADLER
273 / 274mit Walzenobertransport / with top puller feed
Your advantages:
Flat seams in difficult-to-feed material due to bottom feedand intermittent top puller feed (273)Flat, displacement-free seams due to triple feed – bottom-, needle and top puller feed (274)Top puller feed with constant speed, working extremelyclose behind the sewing foot, with direct influence of theseamReproducible adjustment of the top puller feed via hand-wheel, independent of stitch lengthTop puller feed can be lifted upwards, thus the clearanceis equal to that of the 272Height-adjustment of the pressure foot provides a float-ing sewing foot (standard for 274, optional equipment for273) above high pile materialNeat seam beginning due to thread nipperAutomatic sewing foot lift, thread trimming and backtack-ing as standardErgonomically attached multi-switch for puller up/down,backtacking, needle up/down or single stitch and back-tack inversionHigh sewing speed – up to 5.000 stitches/min.DAC Classic control with control panel OP1000Energy-saving, integrated sewing driveCentral oil-wick lubrication
The top puller feed machines 273 and 274 are predestinatedfor flat seams – even in difficult-to-feed fabrics. Even atmaximum speed the top puller feed is characterized by itssynchronous working method. Supplementary to the bottomfeed the material is systematically tensioned during thesewing process due to the additional intermittently operatingpuller, thus producing a pucker-free seam.
Due to the thread nipper the needle thread is pulled to thereverse side of the fabric at the seam beginning. This guar-antees an always neat seam beginning. The machines canvery easily be converted to bottom- / needle feed machinesby lifting the puller out of the working area by hand.
With the triple feed (bottom, needle, top puller feed) the 274 is predestined for displacement-free seams even in pilefabric like e.g. velvet.
Die Walzenobertransport-Maschinen 273 und 274 sind prä-destiniert für glatte Nähte – selbst in transportkritischenMaterialien. Auch bei höchster Nähgeschwindigkeit über-zeugt der Walzenobertransport durch seine synchroneArbeitsweise. Ergänzend zu dem Untertransport wird durchden zusätzlichen, intermittierend arbeitenden Puller dasMaterial während des Nähprozesses gezielt gespannt unddadurch eine kräuselfreie Naht erzeugt.
Mit Hilfe der Fadeneinziehvorrichtung wird der Nadelfadenam Nahtanfang auf die Nähgutunterseite gezogen; dies gar-antiert einen stets sauberen Nahtbeginn. Durch manuellesAusschwenken des Pullers aus dem Nähbereich sind dieMaschinen sehr einfach in Untertransport- / Nadeltransport-maschinen umzustellen.
Durch den Dreifachtransport (Unter-, Nadel- Walzenober-trans-port) ist die 274 prädestiniert für verschiebungsfreieNähte, selbst in Florgewebe wie z. B. Samt.
Ihre Vorteile:
Glatte Nähte in kritischen Materialien durch Unter- undintermittierenden Walzenobertransport (273)Glatte, verschiebungsfreie Nähte in kritischen Materialiendurch Dreifachtransport: Unter-, Nadel- und Walzenober-transport (274)Drehzahlstabiler Walzenobertransport, extrem dicht hinterdem Nähfuß arbeitend, mit direktem Einfluss auf die NahtReproduzierbare Einstellung des Walzenobertransports,unabhängig von der Stichlänge über ein StellradWalzenobertransport hochschwenkbar, daher gewohnterFreiraum wie bei der 272 nutzbar„Höhenverstellung des Stoffdrückerfußes“ gewährt inhochflorigen Materialien wie Samt und Velour ein Schwe-ben des Nähfußes über dem Flor (serienmäßig bei der274, optional bei der 273)Sauberer Nahtanfang durch FadeneinziehvorrichtungAutomatisches Nähfußlüften, Fadenabschneiden und Ver-riegeln serienmäßigErgonomisch angebrachter Multi-Taster für Puller hoch/tief, Verriegelung, Nadel hoch/tief oder Einzelstich undRiegelinvertierungHohe Nähgeschwindigkeit – bis zu 5.000 Stiche/Min.DAC classic Steuerung mit Bedienfeld OP1000Energiesparender, integrierter NähantriebZentrale Öldochtschmierung
DÜRKOPP ADLER
273 / 274Anwendungen / Applications
273 / 274 – Höhenverstellung des Stoffdrückerfußes:
Um bei hochflorigen Materialien einen Lagenverschub zuverhindern, kann die Nähfußhöhe mit Hilfes eines Stellradsam Kopfdeckel erhöht werden (optional bei der 273). Sowirkt der Fuß vermindert auf das Nähgut ein und sorgt sofür einen optimalen Transport.
273 / 274 – Action instead of reaction:
The puller is placed directly behind the presser foot and thusvery close to the needle (28.5 mm). Therefore it effects theseam directly. Controlled by the sewing drive the puller runssynchronized to the feed dog (adjustable by setting wheel),independent of the stitch length. To avoid fabric jam at theseam beginning, the lowering time of the puller can be pro-grammed.
273 / 274 – Flexibility:
For long and straight seams, the puller supports the fabrictransport. It can be lifted by a lever. Then the clearanceaccords to that of a 272. Thus, both straight seams and e.g.curves, can be processed perfectly and quickly.
273 / 274 – Height adjustment of the coth presser foot:
In order to avoid displacement of the layers in high pile fab-rics, the height of the presser foot can be increased with asetting wheel on the face cover (optional on the 273). Thus,the foot has an reduced effect on the fabric and ensures anoptimal transport.
273 / 274 – Aktion statt Reaktion:
Der Puller steht direkt hinter dem Nähfuß und somit sehrnah an der Nadel (28,5 mm). Dadurch wirkt er unmittelbarauf die Naht ein. Durch den Nähantrieb gesteuert, läuft derPuller synchron zum Transporteur (regelbar durch Stellrad),unabhängig von der Stichlänge. Um einen Materialstau amNahtanfang zu vermeiden, kann der Absenkungszeitpunktdes Pullers programmiert werden.
273 / 274 – Flexibilität:
Bei langen und geraden Nähten unterstützt der Puller denMaterialtransport. Er kann mit Hilfe eines Hebels hochge-schwenkt werden. Der Durchgangsraum entspricht danndem einer 272. Somit können sowohl gerade Nähte, alsauch z. B. Rundungen perfekt und schnell verarbeitet wer-den.
273 / 274Die technischen Daten / The technical data
DÜRKOPP ADLER
max. [Nm] max. [Nm] max134 / 797 70 – 120 30/3 20/3 ● ●
134 / 797 70 – 120 30/3 20/3 ● ●
Nadel-system
Needle system
Nadel-stärke
Needle size
Programmsteuerung, Bedienfeld OP1000 mit Anzeige
Program control, operating panel OP1000 with display
Synthetik
Synthetic
Flachbett-Nähmaschine mit energiesparendem, in den Nähkopf integrierten Direktantrieb
Flat bed machine with energy-saving and direct sewing drive integrated in the machine head
[mm] max. C [mm] D [mm]6 ● ● ● 285 1156 ● ● ● 285 115
Nahtverriegelung, Nähfußlüftung und Fadenabschneiden, fußbetätigt
Seam backtacking, sewing foot lift and thread cutting, pedal-controlled
Durchgang beim Lüften
Clearance when lifting
Nahtverriegelung unterdrücken, Nadelhoch/tief und Zwischenriegel, handbetätigt
Disable backtacking, needle up/down andintermittent tacking, actuated by hand
Fadeneinziehvorrichtungfür sauberen Nahtanfang
Thread nipper for a neatseam beginning
U/V U/R WO/V[mm] max. [min-1] max.4,0 4,0 7,0 5.000 L / M ● ● ● ●
4,0 4,0 7,0 5.000 L / M ● ● ● ●
273-140342-01274-140342-01
Stichlänge
Stitch length
Stiche/Min.
Stitches/min.
Eine Nadel
Single needle
Doppel-steppstich
Lockstitch
Untertransport undWalzenobertransport
Bottom feed and toppuller feed
Horizontal-greifer, klein
Horizontalhook, small
Nähgut
Material
Unter-, Nadel- und Walzenobertransport
Bottom feed, needle feed and top puller feed
273-140342-01274-140342-01
273-140342-01274-140342-01
DurchgangsraumC = Breite, D = Höhe
ClearanceC = under the armD = underarm height
Baumwolle
Cotton
[V], [Hz] [W] max. [kg] [NL] [bar] [mm] max. 1x230V, 50/60 Hz 500 33 0,2 6 780 370 7901x230V, 50/60 Hz 500 35 0,2 6 780 370 790
273-140342-01274-140342-01
Nennspannung
Nominal voltage
Bemessungs-leistung
Rated power
Gewicht, Nähkopf
Weight, sewing head
Verpackungsgröße (Länge, Breite, Höhe)
Packaging size (Length, Width, Height)
Luftbedarf je Arbeitshub / Luftdruck
Air requirement per stroke / Air pressure
Zusatzausstattungen:0797 003031 Pneumatik-Anschlusspaket0273 001041 Bausatz „Höhenverstellung des Stoffdrückerfußes”
(nur für 273-140342-01)0271 590024 Infrarot-ReflexlichtschrankeDiverse KantenanschlägeDiverse Nähleuchten
Optional equipment:0797 003031 Pneumatic connection package0273 001041 Kit “height adjustment of the cloth presser foot”
(only for 273-140342-01)0271 590024 Reflecting infrared light barrierVarious Edge guidesVarious Sewing lights
● = Serienausstattung❍ = Optionale ZusatzausstattungM = Mittelschweres NähgutMS = Mittelschweres bis schweres Nähgut
● = Standard equipment❍ = Optional equipmentL = Light weight materialM = Medium weight material
U = UntertransportWO = WalzenobertransportV = VorwärtsR = Rückwärts
U = Bottom feedWO = Top puller feedV = ForwardR = Reverse
273 / 274Die zwei Maschinenklassen / The two machine classes
DÜRKOPP ADLER
273-140342-01:
Single-needle lockstitch machine withbottom feed and top puller feed forcritical-to-feed materials. A heightadjustment of the coth presser foot atthe face cover is optionally available. Typical applications: Long, straightseams such as topstitching the frontedge of the shirt or sewing straighthems of shirts.
273-140342-01:
Einnadel-Doppelsteppstichmaschinemit Unter- und Walzenobertransportfür transportkritische Materialien. EineHöhenverstellung des Stoffdrücker-fußes am Kopfdeckel ist optional ver-fügbar. Typische Anwendungen: Lange, gera-de Nähte wie z. B. Absteppen der vor-deren Kante beim Hemd oder Nähenvon geraden Hemdensäumen.
274-140342-01:
Einnadel-Doppelsteppstichmaschinemit Unter-, Nadel- und Walzenober-transport für transportkritische Materi-alien und verschiebungsfreie Nähte.Die 274 ist serienmäßig mit der„Höhenverstellung des Stoffdrücker-fußes am Kopfdeckel” ausgestattet. Typische Anwendungen: Lange, gera-de Nähte und die Verarbeitung vonhochflorigen Materialien wie Samtoder Plüsch.
274-140342-01:
Single-needle lockstitch machine withbottom feed, needle- and top pullerfeed for critical-to-feed materials anddisplacement-free seams. The 274 isequipped with the height adjustmentof the coth presser foot at the facecover as standard. Typical applications: Long, straightseams and processing of high-pilefabrics such as velvet or plush.
Sub
ject
to
desi
gn c
hang
es ·
Par
t of
the
mac
hine
s sh
own
with
add
ition
al e
quip
men
t · P
rinte
d in
Ger
man
y · 9
099
1002
73 0
1 · D
E/E
N ·
12/2
014
Cop
yrig
ht ©
Dür
kopp
Adl
er A
G ·
2014
· A
ll rig
hts
rese
rved
· R
epro
duct
ion
or p
ublic
atio
n - e
ven
in e
xtra
cts
- is
proh
ibite
d w
ithou
t pr
ior
writ
ten
perm
issi
on o
f D
ürko
pp A
dler
AG
DÜRKOPP ADLER AGPotsdamer Straße 190 33719 Bielefeld GERMANYPhone +49 (0) 521 / 925-00 E-mail marketing@duerkopp-adler.comwww.duerkopp-adler.com