Post on 04-Nov-2015
description
Frame
SPECIFICATION
No: 2520 M1F 00 01 00
Issue: 11
Date: 20.05.2005
Page: 28 of 104
1 GENERAL
This specification defines the minimum requirements, safety standards and rec-
ommendations for all types of passenger seats that may be used for installation
in Airbus A318 / A319 / A320 / A321.
For the A318 JAA type certification in addition the 16g seat frame specification
2520 M1F 0005 00 must be fulfilled.
Maximum number of passenger seats per A/C:
A318: 136 pax. (2 pairs of oversized type I exits called type C in this spec.) A319: 145 pax. (2 pairs of oversized type I exits called type C in this spec.) A319-2 OWE: 160 pax (2 pairs of oversized type I exits called type C in this spec.) A320: 180 pax. (2 pairs of oversized type I exits called type C in this spec.) A321: 220 pax. (4 pairs of oversized type I exits called type C in this spec.)
For installation of convertible seats the maximum number of passenger seats
shall apply to the configuration in which all converter seats are configured for
maximum occupancy.
Maximum number of passenger seats for A321 according to CRI E3001 and
CRI E3002
Door 1: Door 2: Door 3: Door 4:
2 x C 2 x C 2 x C 2 x C
2 x C 2 x C 2 x I 2 x C
2 x C2 x I 2 x C2 x C
2 x C 2 x C 2 x III 2 x C
2 x C2 x I 2 x I 2 x C
2 x C 2 x III 2 x C 2 x C
2 x C 2 x I 2 x III 2 x C
2 x C 2 x III 2 x I 2 x C
2 x C 2 x III 2 x III 2 x C
Between:
door 1 and 2
110 110 100 110 100 90 100 90 90
door 1 and 3 165 155 155 145 145 145 135 135 125
door 2 and 3 110 100 100 90 90 90 80 80 70
door 3 and 4 110 100 110 90 100 110 90 100 90
door 2 and 4 165 155 155 145 145 145 135 135 125
door 1 and 4 220 210 210 200 200 200 190 190 180
This document is confidential. It is the property of Airbus. This document must not be, partially or totally, reproduced, nor lent to a third party, nor used against the aforementioned company.