Post on 22-Feb-2018
7/24/2019 2011 Isometric Drawing Training .doc
1/164
SmartPlant 3D
Isometrics Practice Labs
7/24/2019 2011 Isometric Drawing Training .doc
2/164
CopyrightCopyright 2008 Intergraph Corporation. All Rights Reserved.
Including software, file formats, and audiovisual displays may !e used pursuant to applica!le software license
agreement contains confidential and proprietary information of Intergraph and"or third parties which is protected !y
copyright law, trade secret law, and international treaty, and may not !e provided or otherwise made availa!lewithout proper authori#ation.
Restricted Rights Legend
$se, duplication, or disclosure !y the %overnment is su!&ect to restrictions as set forth in su!paragraph 'c( of the
Contractor Rights in Technical Dataclause at )*AR+ 22.22--0/, su!paragraph '!( of theRights in ComputerSoftware or Computer Software Documentation clause at )*AR+ 22.22--0/1, su!paragraphs '!('/( and '2( of
theLicenseclause at )*AR+ 22.22--0/, or su!paragraphs 'c( '/( and '2( of Commercial Computer Software---
Restricted Rights at 18 C*R 2.22-/, as applica!le.
$npu!lishedrights reserved under the copyright laws of the $nited +tates.
Intergraph Corporation
3untsville, Ala!ama 81000/
Warranties and Liabilities
All warranties given !y Intergraph Corporation a!out e4uipment or software are set forth in your purchase contract,
and nothing stated in, or implied !y, this document or its contents shall !e considered or deemed a modification or
amendment of such warranties. Intergraph !elieves the information in this pu!lication is accurate as of itspu!lication date.
5he information and the software discussed in this document are su!&ect to change without notice and are su!&ect to
applica!le technical product descriptions. Intergraph Corporation is not responsi!le for any error that may appear in
this document.
5he software discussed in this document is furnished under a license and may !e used or copied only in accordance
with the terms of this license.
6o responsi!ility is assumed !y Intergraph for the use or relia!ility of software on e4uipment that is not supplied !yIntergraph or its affiliated companies. 537 $+7R * 537 +*59AR7 I+ 7:;7C57) 5
7?A>$A5I6 A+ 5 537 $+7*$>67++ * 537 +*59AR7 I6 3I+ 96 76?IR6
7/24/2019 2011 Isometric Drawing Training .doc
3/164
7/24/2019 2011 Isometric Drawing Training .doc
4/164
1ontents
Lab : (rawing rame ttributes............................................................................................................2
Attri'&te )AP...................................................................................................................................... 70
Drawin%rame.Attri'&tes.....................................................................................................................73
Add Pi-eline ist 9e-ort...................................................................................................................... 7*
9e-ort Tem-late............................................................................................................................7*
Lab 1: (rawing Content.........................................................................................................................-
1an%e )ana%ement.......................................................................................................................... 78
so 2reak 1ontrol Points...................................................................................................................... 80
Sele!tive dis-lay of S&--orts.............................................................................................................. 85
Lab 11: (rawing ormat....................................................................................................................... ...-
Dotted Sym'olo%y............................................................................................................................... 8"
Lab 12: (rawing (efinitions....................................................................................................................4
Lab 13: (rawing (imensioning and Coordinates.......................................................................... .......
1an%e Dimension Style to &ll Strin%................................................................................................"7
Dimension to Tien Points..................................................................................................................."8
1ol&mn4rid 9eferen!e..................................................................................................................... +/+
Lab14: Labe&s.........................................................................................................................................13
S3D.a'els.1om-onentote.............................................................................................................+/3
S3D.a'els.1om-onentote1onditional...........................................................................................+/5
S3D.a'els.#nd1onne!tion.............................................................................................................. +/5
Lab15: ttribute Brea+s......................................................................................................................... 1
Add a new 'reak for !leanin% re&irement........................................................................................ +/7
S3D.a'els.)is!S-e!................................................................................................................... .... +/7
a'els.1om-onentAtts...................................................................................................................... ++/
Addin% 1om-onent Pro-erties:..........................................................................................................++/
Lab 1": 'ateria& List...............................................................................................................................113
)aterial ayo&t.................................................................................................................................. ++3
)aterialist.i$ed........................................................................................................................ ++3
)aterialist.;aria'leayo&t......................................................................................................... ++5
a'els.)aterialist...................................................................................................................... +00
)aterialist.UserDefined............................................................................................................. +0*
)aterial Des!ri-tion 'y a'el............................................................................................................ +06
)aterialist.1&tist............................................................................................................................ +07
Lab1: 6e&d O!tions............................................................................................................................. 12-
Se&en!e welds................................................................................................................................ +08
30
7/24/2019 2011 Isometric Drawing Training .doc
5/164
1ontents
T&rn on weld n&m'ers....................................................................................................................... +08
Weld ist............................................................................................................................................ +3/
Lab1-: (etai& $+etch.............................................................................................................................. 133
Lab 1: $%mbo& 'a!!ing.......................................................................................................................13"
)a--in% Sym'ol
7/24/2019 2011 Isometric Drawing Training .doc
6/164
35
Introduction
A&tomated isometri! drawin% -rod&!tion is nat&rally e$-e!ted in 3D -lant desi%n and S,4# is te&ndo&'ted world leader in te -rod&!tion of s&! drawin%s.
SmartPlant 3D mana%es te a&tomati! drawin% !reation> &tilisin% S,4# 'y %eneratin% a P1 ?Pi-in%1om-onent ile@ and 'y &sin% te ,-tions 2rowserB for !ontrollin% te drawin% !onfi%&ration.
Te res<ant o&t-&t is stored in te SmartPlant 3D data'ase. Te drawin% styles are stored in teSmartPlant 3D !atalo%&e and are written to an C) !onfi%&ration file for -ro!essin% 'y S,4#.
6or+f&ow:
Te workflow in !reatin% an isometri! drawin% !an 'e !onsidered in two -arts:
Te Administration Workflow
Te User Workflow
SmartPlant 3D
PersonalS,4#
P1
sometri!Drawin%s
Style Data
9e-orts o%s
7/24/2019 2011 Isometric Drawing Training .doc
7/164
a'3: 1reatin% ew Style
dministration 6or+f&ow:
Te SmartPlant 3D Administrator will !reate an isometri! style !ontainin% a 2order file and a set or!onfi%&ration o-tions> tis will 'e 2&lk oaded into te 1atalo%.
A *i!ing Isometric (rawing b% ;uer%
7/24/2019 2011 Isometric Drawing Training .doc
8/164
a'3: 1reatin% ew Style
ser 6or+f&ow:
Te SmartPlant 3D &ser !reates a Drawin%s 'y (&ery )ana%erB !om-onent to s-e!ify te EwereE-ortion of te &ery.
Te (rawings b% ;uer% 'anager if ne!essary
P&'lis te drawin%s to a viewa'le %ra-i! file no -ysi!al data is -&'lised
37
7/24/2019 2011 Isometric Drawing Training .doc
9/164
a'3: 1reatin% ew Style
9ota& 6or+f&ow:
(e&iered $t%&es:
#a! Pi-in% sometri! Drawin% 'y (&ery !om-onent as an asso!iated isometri! style. Te deliveredstyles are Iso=*i!e&ine> Iso=*i!erun> Iso=*en$!oo&> Iso=$!oo&> Iso=6B$> and Iso=$tress.Go& !an o-en te Isometric $t%&e O!tions Browserfrom any of te isometri! drawin% styles 'y ri%t
!li!kin% te drawin% style in te Conso&e or in te (rawings and 8e!ortstask and sele!tin% >ditO!tionson te sort!&t men&. Te 'rowser allows yo& to set o-tions for isometri! drawin% format and!ontent> tese !an%es !an 'e saved to te 1atalo% or e$-orted to an C) file for &se on oter -ro=e!tset!.
After !reatin% te Pi-in% sometri! Drawin%s> yo& !an o-en tem for viewin%> editin%> -rintin%> and-&'lisin% ?if yo&r model as 'een re%istered &sin% te SmartPlant 9e%istration WiHard@.To tro&'lesoot te drawin%s> yo& !an &se te ?iew >xtraction (ata!ommand to a!!ess -art andre-orts information and lo% files.
38
7/24/2019 2011 Isometric Drawing Training .doc
10/164
a'3: 1reatin% ew Style
$mart*&ant 3( ser Interface:
Te main &ser interfa!e wen in te SmartPlant 3D is sown 'elow> &se tese dia%rams to lo!ated'&ttons and feat&res mentioned in te la's.
n addition> wen in te Drawin%s and 9e-orts task> te interfa!e is as sown 'elow:
3"
7/24/2019 2011 Isometric Drawing Training .doc
11/164
a'3: 1reatin% ew Style
n SmartPlant 3D version 0//7> Servi!e Pa!k * and a'ove> te drawin% !onsole is availa'le from witinall tasks. t is dis-layed from te Tools I Drawin% 1onsole men& item:
Tese la's %ive instr&!tions from te Drawin%s and 9e-ortsB task> owever> &sin% ;0//7 Servi!e Pa!k *and a'ove> tey !an =&st as easily 'e -erformed &sin% te Drawin% 1onsoleB.
Do!&ment !ons:
Pi-in% sometri! Drawin%s 'y (&ery )ana%er
Drawin%s 'y (&ery )ana%er
,&t of Date Do!&ment
U- to Date Do!&ment
Do!&ment wit Warnin%
o Part fo&nd in Pi-eline
*/
7/24/2019 2011 Isometric Drawing Training .doc
12/164
a'3: 1reatin% ew Style
Lab 1: Out of the Box Isometric drawings extraction
>xtracting Isometric (rawings using (rawings b% ;uer% 'anager
1. n a' +> yo& are %oin% to %enerate an isometri! &sin% te o&t of te 'o$B soJPi-eline style:
2. #nter SmartPlant 3D 'y do&'le !li!kin% te sometri!JWorkso-.ses sort!&t on te Deskto-:
3. Swit! to te (rawings and 8e!ortstask 'y sele!tin% te Task I Drawin% and 9e-orts men& item:
4. 9i%t !li!k on -lant $*3(9rain> sele!t #ew.. to !reate a older> te folder is fo&nd on te 4eneralTa':
5. 9ename te new folder to: I$O$
*+
7/24/2019 2011 Isometric Drawing Training .doc
13/164
a'3: 1reatin% ew Style
". 9i%t !li!k on S,S> sele!t ew.. to !reate a Drawin% 2y (&ery )ana%er from te 4eneral ta'
. 9ename te res<in% Drawin%s 2y (&ery )ana%er folder to nit1:
*0
7/24/2019 2011 Isometric Drawing Training .doc
14/164
a'3: 1reatin% ew Style
-. 9i%t !li!k Unit/+ and sele!t Set&-..
. Under ilter sele!t )ore.. and -i!k Trainin% iltersIU/+
Under Pa!ka%es Sele!t )ore.. and -i!k Iso *i!e&ine
1. 1li!k , sele!t so Pi-eline and #dit ,-tions.
$ource of O!tion
;ersion SP3D;0/++SP+ and a'ove> sometri! ,-tion 2rowser &ser interfa!e as 'een !an%ed.All S3D ,-tions are listed o&t se-arately &nder S3D ode in te ,-tion 2rowser and all oter o-tionsa'ove S3D node are te onS3D ,-tions ?so%en@ o-tions:
*6
7/24/2019 2011 Isometric Drawing Training .doc
18/164
a'3: 1reatin% ew Style
+. #$-and and sele!t S3D.Drawin%.DimensionsSele!t 1oord,&t-&t2,P in te ri%t -ane.
*7
7/24/2019 2011 Isometric Drawing Training .doc
19/164
a'3: 1reatin% ew Style
oti!e te 'ottom ri%t !orner says S3D> indi!atin% tat tis is a S3D o-tion and not te so%eno-tion. 2&iltin el- e$-lains te -ossi'le val&es of te swit!es and teir effe!t.
0. Sele!t Drawin%.Dimensions.1oordS&--orts in te ri%t -ane.
oti!e te 'ottom row now tells &s an o-tion ?,P@ n&m'er and a swit! ?SW@ n&m'er. Tisindi!ates tat tis is so%en o-tion wit referen!es to Alias so%en o-tion and swit! n&m'er. Tisinformation is -rovided to el- look&- in te so%en ,-tion Swit!es el- %&ide.
*8
7/24/2019 2011 Isometric Drawing Training .doc
20/164
a'3: 1reatin% ew Style
$earch o!tions
Te sear! 'o$ at te to- of te 'rowser a!ts as a s&'strin% sear! for all o-tion names.
+. Ty-e WeldB in te sear! 'o$ and -ress enter. All o-tions wit name !ontainin% te te$t WeldB are
dis-layed.
*"
7/24/2019 2011 Isometric Drawing Training .doc
21/164
a'3: 1reatin% ew Style
Te sear! 'o$ also el-s sear! for Alias o-tions 'y n&m'er &sin% te sear! synta$ L,PT:$$ were $$is te o-tion n&m'er.
0. #nter L,PT:" in te sear! 'o$ and -ress enter. Tis dis-lays all SP3D o-tions tat &sed to 'evario&s swit!es on Alias o-tion ".
$orting
+. 1li!kin% on any !ol&mn eadin% sorts a !ol&mn
Inserting and de&eting rows
+. Tere wo&ld 'e a 'lank row at almost every %rid view were &ser as to add rows. To insert a row=&st kee- on ty-in% in te 'lank row and new rows wo&ld 'e added a&tomati!ally if te last one is!ons&med.
#.%. #$-and Drawin%.ayers.ayers?+/@ in tree view and start ty-in% at very last row> o'serve tatnew 'lank row wo&ld !reate as soon as yo& start ty-in% in te last row.
5/
7/24/2019 2011 Isometric Drawing Training .doc
22/164
a'3: 1reatin% ew Style
0. To delete a row> yo& !an &se te delete row '&tton or delete key on key'oard> if fo!&s is on %ridview.
$aing o!tions
+. To save o-tions to !atalo%> &se Save to 1atalo% '&tton from te tool'ar.
0. To save o-tions to C) file> sele!t te to- node of te style and sele!t Save Style C) ileB'&tton from te tool'ar.
5+
7/24/2019 2011 Isometric Drawing Training .doc
23/164
a'3: 1reatin% ew Style
Im!orting o!tions
3. To im-ort o-tions from a -revio&sly saved file> sele!t any node and sele!t te im-ort '&tton> ten'rowse to te saved file. Tis f&n!tionality !an 'e &sed to &-date an entire style or -ortion of styleto new o-tions introd&!ed 'y nter%ra-.e.%. Sele!t Attri'&te)AP node in te tree and sele!t m-ort Data from ile. Ten 'rowse to a C)
file and !li!k ,
7/24/2019 2011 Isometric Drawing Training .doc
24/164
a'3: 1reatin% ew Style
Lab3: Creating #ew $t%&e
1reatin% a new style involves editin%im-ortin% a 'ordertem-late file> !o-yin% te C) file wit o-tionsand '&lkloadin% te new style into te !atalo%.
Co!%ing >xisting $*3( Border
+. 1o-y and -aste soJPi-eline.i%r file from te sym'ol sare MMNServerOMSym'olsMPmf%soStyleData .0. 1o-y and -aste soJPi-eline.$ml file from te sym'ol sare MMNServerOMSym'olsMPmf%soStyleData3. 9ename 1o-y of soJPi-eline.i%r to UsersoJPi-eline.sa*. ,-en te UsersoJPi-eline.sa file &sin% Drawin% #ditor.5. Save te file and e$it Drawin%s #ditor6. 9ename UsersoJPi-eline.sa to UsersoJPi-eline.i%r
Bu&+&oading #ew st%&e
+. ,-en te file 2&lkloadisokeys.$ls from Nnstall Dire!toryOM1atalo%DataM2&lkloadMDatailes.0. Sele!t row 6 ?soJPi-eline@ and ri%tmo&se 1o-y.3. Sele!t row ++ ?#nd@ and ri%tmo&se nsert 1o-ied 1ells.*. Add letter A in !ol&mn A of row ++5. 1an%e soJPi-eline to UsersoJPi-eline in te soames !ol&mn6. 1an%e ,&tP&tsoDrawin%so!ation to soDrawin%sMUsersoJPi-eline7. 1an%e so2a!kin%Seet to Pmf%soStyleDataMUsersoJPi-eline.i%r8. 1an%e n%r,-tion to Pmf%soStyleDataMUsersoJPi-eline.$ml". Save te e$!el s-readseet and !lose #$!el.+/. 2rowse to te folder Pmf%soStyleData in te Sym'ols sare on te server and !o-y te file>
soJPi-eline.$ml> rename it to 'e UsersoJPi-eline.$ml and &n!e!k te read only -ro-erty forte files.
++. ,-en te UsersoJPi-eline.$ml file &sin% a te$t editor and &se te sear! tool for te word
soJPi-eline. 1an%e all o!!&rren!es of soJPi-eline to UsersoJPi-eline+0. Save te file.+3. Start te 2&lkload &tility &sin% StartPro%ramsnter%ra- SmartPlant 3D Data'ase Tools
2&lkload 9eferen!e Data
+*. 1li!k te Add '&tton and add te 2&lkloadso
7/24/2019 2011 Isometric Drawing Training .doc
25/164
a'3: 1reatin% ew Style
+8. 1li!k oad to load te new style into te !atalo%.
+". 9eview te lo% file > it so&ld sayS&!!essf&lly !reated te o'=e!t in row N++O
5*
7/24/2019 2011 Isometric Drawing Training .doc
26/164
a'3: 1reatin% ew Style
Lab 4: Im!orting 'icrostation ()# Border fi&e
Im!orting existing ()# border0seed fi&e
+. f yo& ave an e$istin% D4 or DW4 file wi! is 'ein% &sed as seed'order> it !an 'e re&sedfor SP3D isometri!s.
0. An e$istin% D4 file ?UsersoJPi-elineD4.d%n@ is availa'le at MMNServerOMSym'olsMPmf%soStyleData. f &sin% D4 file> first> &sin% )i!roStation tools> mer%e teseed and 'order file into a sin%le D4 file. owever> for tis la' we ave a ready made D4 fileto im-ort in Sa-e0D.
3. Start Drawin% #ditor. ?sa-e0dserver.e$e !an 'e lo!ated at 1:MPro%ramilesMSmartPlantM3DM1ommon0DMSa-e0DM2in@
*. n te Tools K ,-tions K orei%n Data ta'> !li!k ,-tionsF for te )i!roStation format> ten>&n!e!k te it im-orted data to a!tive seetB o-tion.
5. ile K ,-en and navi%ate to te D4 ?UsersoJPi-elineD4.d%n@ file.
6. 4o to ile K Seet Set&- and ad=&st te widt and ei%t of seet wit $tandardor Custom siHe.)ake s&re tat te 2order %ra-i!s are in Bac+ground seet and not in 6or+ingseets. Seetset&- needs to 'e -erformed for 'ot workin% as well 2a!k%ro&nd seet.
55
7/24/2019 2011 Isometric Drawing Training .doc
27/164
7/24/2019 2011 Isometric Drawing Training .doc
28/164
a'3: 1reatin% ew Style
". 1an%e 'a!k%ro&nd !olor ?if ne!essary@ &sin% Tools K ,-tions and make oter !an%es asre&ired.
+/. Save te file as a UsersoJPi-elineD4.sa++. 9ename te file as UsersoJPi-elineD4.i%r+0. Tis im-orted D4 file !an now 'e &sed as a normal 'order file wi! !an 'e &tiliHed for !reation
of a new style.
57
7/24/2019 2011 Isometric Drawing Training .doc
29/164
a'3: 1reatin% ew Style
Lab 5: Create *ac+age and $etu! ,ierarch%
Creating a !ac+age
+. Swit! to Drawin%s and 9e-orts task.0. Add a new folder &nder te root of te -lant !alled *ac+agesB3. 9i%t!li!k on Pa!ka%es folder and add a new *i!ing Isometric (rawings b% ;uer% sele!t te style serIso=*i!e&ine< ?Tis style was '&lkloaded in earlier la'@
58
7/24/2019 2011 Isometric Drawing Training .doc
30/164
a'3: 1reatin% ew Style
7. 9i%tmo&se User and Save Pa!ka%eF
8. ame te Pa!ka%e UserB and save it in te sometri!s ?2y (&ery@ folder
5"
7/24/2019 2011 Isometric Drawing Training .doc
31/164
a'3: 1reatin% ew Style
Creating (rawing b% ;uer% 'anager
1. 9i%t!li!k I$O$B> sele!t ewF and add a new (rawing b% ;uer% 'anager te !onsole ierar!y is &-dated to mat! system ierar!y.
12. 9evert !an%es made to Pi-eline and Pi-in% System ?+//+P and Pro!ess@
60
7/24/2019 2011 Isometric Drawing Training .doc
34/164
a'3: 1reatin% ew Style
Lab : (efining Border $i/e 0 'argins and nits
n a' 7> yo& are %oin% to set te drawin% siHe> &nits and mar%ins. ormally> teDrawin%.1ontrols.Drawin%SiHe o-tion is &sed to s-e!ify te siHe of yo&r isometri!.
f yo& ave a nonstandard drawin% siHe> yo& will need to set it e$-li!itly in te o-tions. Use teDrawin%rame.1&stomWidt and 1&stomei%t o-tions for tis -&r-ose.
Additional o-tions ere allow yo& to reserve s-a!e for )ar%ins and reserved areas in te isometri!.
1. 9i%t!li!k I$O$B> sele!t ewF and add a new (rawing b% ;uer% 'anager sele!t #dit ,-tionsB
. Sele!t te Drawin%.1ontrols se!tion> and !an%e Drawin%SiHe and PostS!ri-tSiHe to RA0>!an%e Units to )etri! n! 2oresB
65
7/24/2019 2011 Isometric Drawing Training .doc
37/164
a'3: 1reatin% ew Style
1. Sele!t te Drawin%rame se!tion and !an%e eft )ar%in 0/3> 9i%t )ar%in +/ To- mar%in +/> 2ottom mar%in 50> 9eservedAreaDrawin% /
66
7/24/2019 2011 Isometric Drawing Training .doc
38/164
a'3: 1reatin% ew Style
11. Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: and !lose te ,-tions2rowser.
12. U-date drawin% +//+P.
An A0siHe m<iseet drawin% is !reated wit te material list in te wron% -osition:
Ti-: f yo& !lose te ,-tions 2rowser> yo& will 'e asked if yo& want to save te !an%es.
n s&'se&ent la's> we wo&ld see ow to modify )aterial ists.
Tis !om-letes a' 7.
67
7/24/2019 2011 Isometric Drawing Training .doc
39/164
a'3: 1reatin% ew Style
Lab-: (rawing rame
or do!&ment -ro-erties> tese will not 'e written as attri'&tes in te P1> instead> tey will 'e linkedfrom te drawin% do!&ment to te 'order file.
Do!&ment -ro-erties !an 'e set at any level in te )ana%ement 1onsole> for instan!e> te -ro=e!t Tile!o&ld 'e set at -ro=e!t level and inerited 'y all te do!&ment> wilst te Drawn 2y> 9evision> Drawin%Title et!. will 'e set on individ&al do!&ments.
*&acing drawing !ro!ert% Labe&s
n tis a'> yo& are %oin% !reate a link 'etween a do!&ment -ro-erty val&e and te 'order &sin% s-e!ialTe$t 2o$es wit C) linkin% te -ro-erty to te 'o$.
+. 1o-y te file UsersoA0.sa from te MMNServerOMSym'olsMPmf%soStyleData folder to MMNServerOMSym'olsMDrawin%sM1atalo%Mtem-lates folder
0. #nter te Drawin%s and 9e-orts Task.3. Sele!t Tools I #dit 2order Tem-late.*. Sele!t RUsersoA0.sa
5. rom te ;iew men&> sele!t 2a!k%ro&nd Seets
6. Sele!t te Pla!e Drawin% Pro-erty a'el !ommand
7. n te a'el Set -&ll down> -i!k Title Area8. n te ield -&ll down> -i!k Site ame
68
7/24/2019 2011 Isometric Drawing Training .doc
40/164
a'3: 1reatin% ew Style
". 1li!k in te title area to te ri%t !orner of te seet to -la!e te la'el as sown 'elow:
+/. Similarly -i!k te Title+ and Title 0 fields from te Title la'el set and -la!e tem as well.
++. Ti-: 2y !li!kin% on te two 'o$Bs yo& are a'le to dis-lay te -la!ed la'els as well asdefinin% Te$t ei%t> ont> &stifi!ation et!.
+0. Save te tem-late> set te view 'a!k to Workin% SeetsB and e$it Drawin%s #ditor.
+3. 1o-y te file UsersoA0.sa 'a!k from te MMNServerOMSym'olsMDrawin%sM1atalo%Mtem-lates folderto te MMNServerOMSym'olsMPmf%soStyleData folder
+*. Sele!t te UsersoA0 style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB
+5. Wilst te ,-tions 2rowser is o-en> 1o-y and Paste te RUsersoA0.sa from te MMNServerOMSym'olsMPmf%soStyleData folder to re-la!e te one e$istin% in te windows T#)Pfolder.
+6. Save and e$it from te o-tions 'rowser.
$etting (ocument *ro!erties
+. n tis a'> yo& are %oin% to set a do!&ment -ro-erty and see ow it a--ears on te 'order.
0. Sele!t te UsersoA0 style and &sin% a ri%t mo&se !li!k> sele!t Pro-ertiesB
3. Sele!t Te Title Area ta' and set te site name to )G ST#B:
6"
7/24/2019 2011 Isometric Drawing Training .doc
41/164
a'3: 1reatin% ew Style
*. 1li!k , sele!t Pro-ertiesB
6. Sele!t te Title Area ta' and set Title+ S,)#T91 D9AW4 and Title 0 ,9 PP##+//+P as sown:
7/
7/24/2019 2011 Isometric Drawing Training .doc
42/164
a'3: 1reatin% ew Style
7. 1li!k , &seisometri! o-tion settin%s ?tese are already set@
5. )aterialist.)aterialist,verflow to 1ontin&ation Seet
6. )aterialist.,verflowDrawin%D to Al-a s&ffi$ ?e.%: 0A> 3A> et!@.
7. Set )aterialist.Drw+of+,nSin%lesos to Tr&e
8. Wit tis done> -art items will remain on te same seet
". #$tra!t line +//0P &nder U/+ and review seets !ontent. )ake s!reensots or Saveas to-reserve a !o-y of tis rev/ ?i%nore 'order siHe mismat!..@
+/. Swit! to Pi-in% task and model additional -i-in% on line +//0P. Under normal !onditions tismi%t -&s old !om-onents to different iso seets
8/
7/24/2019 2011 Isometric Drawing Training .doc
52/164
a'3: 1reatin% ew Style
++. #$tra!t line +//0P &nder U/+ a%ain and !om-are seets !ontent wit tat of rev/
+0. All items tat were e$tra!ted te first time so&ld a--ear on te same seet n&m'ers as 'efore
+3. ew -i-in% items modeled so&ld a--ear added on e$istin% seets in -revio&sly !lear s-a!es> orin newly !reated seets
+*. ,'serve tat newly added !om-onent re!eive new -art n&m'ers and te ones for e$istin%!om-onents are -reserved.
8+
7/24/2019 2011 Isometric Drawing Training .doc
53/164
a'3: 1reatin% ew Style
Iso Brea+ Contro& *oints
+. Te &ser !an for!e a new drawin% seet for a %iven -i-eline or -i-er&n e$tra!tion 'y insertin% a*i!ing') Limit *ointin te model.
0. 4o to te Drawin%s and 9e-orts task and #dit ,-tions in te serB style in U/+ to o&t-&t on DsiHe ?Drawin%.1ontrols@ AD t&rn off 1an%e )ana%ement
80
7/24/2019 2011 Isometric Drawing Training .doc
54/164
a'3: 1reatin% ew Style
3. #$tra!t iso of +//+P> it so&ld 'e one sin%le seet
*. Swit! to Pi-in% task
83
7/24/2019 2011 Isometric Drawing Training .doc
55/164
a'3: 1reatin% ew Style
5. 1oose R1onne!tions from o!ate filter and sele!t a 1onne!tion o'=e!t on te Pi-eline +//+Pas sown in te -i!t&re 'elow:
6. Sele!t Insert A Contro& *oint
7. Position 1ontrol Point at te sele!ted 1onne!tion ,'=e!t
8. Set te Subt%!efor te !ontrol -oint to *i!ing'fg Limit *oint
8*
7/24/2019 2011 Isometric Drawing Training .doc
56/164
a'3: 1reatin% ew Style
". #$tra!t iso of +//+P> te &-dated drawin% so&ld ave two seets
+/. Te Pi-in% 1om-onent ile ?P1@ so&ld ave te line S,SPTP,T followed 'y te C> G>and Q !oordinates of te isometri! 'reak !ontrol -oint
85
7/24/2019 2011 Isometric Drawing Training .doc
57/164
a'3: 1reatin% ew Style
$e&ectie dis!&a% of $u!!orts
Te $3(.(rawing.Content.$u!!orti&ter isometri! o-tion allows yo& to s-e!ify a filter tat determineswi! s&--orts are in!l&ded on an isometri! drawin%. f no filter is s-e!ified> all asso!iated s&--ortsa--ear on te iso.
1. n te Pi-in% task> add 0 new an%ers 'y r&le on +//0P
2. Set stat&s to A--roved for one of te an%ers assem'ly
3. Use ToolsISele!t 'y ilter to !reate a Plant filter named !d=$!ttat lo!ates a--roved -i-in%
s&--orts assem'lies only
86
7/24/2019 2011 Isometric Drawing Training .doc
58/164
a'3: 1reatin% ew Style
87
7/24/2019 2011 Isometric Drawing Training .doc
59/164
a'3: 1reatin% ew Style
4. Swit! to Drawin% task and #dit ,-tions for te style in ser !reate a new filter and name te filter Dotted Dimensioned PartsB7. ,n te o'=e!t ty-e ta'> sele!t Pi-in%MPi-in% Parts
"/
7/24/2019 2011 Isometric Drawing Training .doc
62/164
a'3: 1reatin% ew Style
8. ,n te -ro-erty ta'> sele!t )ore.. to add a new -ro-erty.
". n te Sele!t Pro-erties dialo%> sele!t te 1onstr&!tion 9e&irement -ro-erty as sown
"+
7/24/2019 2011 Isometric Drawing Training .doc
63/164
a'3: 1reatin% ew Style
+/. 2a!k on te -ro-erties ta'> sele!t te val&e #$istin%B from te !odelist
++. 1li!k ,< to define te new filter and ten sele!t it for te style.+0. A -redefined filter *i!ing Isometric (otted $%mbo&og%
7/24/2019 2011 Isometric Drawing Training .doc
64/164
a'3: 1reatin% ew Style
+3. Save ,-tions to !atalo%.
+*. Swit! to -i-in% task> sele!t a few -arts from te line +//0P and !an%e teir !onstr&!tionre&irement to >xisting yo& so&ld see tat te -arts and te welds as dotted.
"3
7/24/2019 2011 Isometric Drawing Training .doc
65/164
a'3: 1reatin% ew Style
Tis !om-letes a' ++
"*
7/24/2019 2011 Isometric Drawing Training .doc
66/164
a'3: 1reatin% ew Style
Lab 12: (rawing (efinitions
n a'+0> yo& are %oin% to !an%e te look of te drawin% 'y &sin% drawin% definitions.
+. Sele!t te UserB Style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB
0. Sele!t Drawin%.Definitions.Definitions and yo& will see te !&rrent definitions:
3. Ti-: Te ,-tions 'rowser !an 'e resiHed to sow more !ol&mns.
"5
7/24/2019 2011 Isometric Drawing Training .doc
67/164
a'3: 1reatin% ew Style
*. 1li!k in a !ol&mn of te last row for insertin% new data.5. A--lies to lan%es> U--er2ore +> ower2ore +> 1ate%ory A> 1olo&r 5> ayer +/>
DS!ale +//> > Ti!knessA!t&al /.35> Ti!knesso%i!al 0.//> ine Style / as sown:
6. n te !&rrent drawin%> te flan%es are 'ein% sown in 'l&e> tis will !an%e tem to 'e drawn red?te same as te -i-e@.
Ti-: f yo& !an%e te Drawin% &nits to 'e )etri! 2ores ten all te 'ore val&es in tis ta'le willneed to 'e !an%ed to teir metri! e&ivalents.
7. Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: and !lose te ,-tions2rowser.
8. U-date te drawin% +//+P &nder U/+.
". Wile we are !on!entratin% on te drawin%> a%ain o-en te o-tions 'rowser and Sele!tDrawin%.ormat. Set te val&e of S-oolDTy-e to one
"6
7/24/2019 2011 Isometric Drawing Training .doc
68/164
a'3: 1reatin% ew Style
+/. Save te !an%es> !lose te ,-tions 2rowser and U-date te U/+ drawin% +//+P.
++. Go& will noti!e te , SP,, ,UDB messa%e is no lon%er sown.
Tis !om-letes a'+0
"7
7/24/2019 2011 Isometric Drawing Training .doc
69/164
a'3: 1reatin% ew Style
Lab 13: (rawing (imensioning and Coordinates
Change (imension $t%&e to u&& $tring
+. ,-en te isometri! +//+P and noti!e tat te dimensions down te verti!al line are !enter to!enter
0. #dit o-tions on te UserB style and %o to Drawin%.Dimensions.ormat
3. 1an%e te ty-e to &ll Strin%B
"8
7/24/2019 2011 Isometric Drawing Training .doc
70/164
a'3: 1reatin% ew Style
*. Save to !atalo% and e$it o-tion 'rowser.5. U-date te isometri! +//+P> noti!e dimensions
6. Swit! format 'a!k to 2asi! for ne$t la's.
""
7/24/2019 2011 Isometric Drawing Training .doc
71/164
a'3: 1reatin% ew Style
(imension to 9ie7In *oints
Dimensionin% to tiein -oints is a!ieved 'y -la!in% a !ontrol -oint as a !ild of a -i-e -art> ten -la!in% anote on te !ontrol -oint of te ty-e a'ri!ationB and t&rnin% te Sow DimensionB !e!k 'o$ of te note
on.
+. Swit! to -i-in% task and Hoom in on +//+P0. nsert 1ontrol Point and -i!k te strai%t -i-e 'etween te el'ow and te tee in te -i-eline
+//+P. )ake s&re to -i!k Pi-e Part from te (&i!k Pi!k and not Pi-e eat&re.
3. o!ate te mid -oint of te -i-e and !li!k to -la!e te !ontrol -oint.
*. Wit te !ontrol -oint sele!ted> invoke te -ro-erty -a%e5. 1li!k te notes ta' and !li!k ew oteB
+//
7/24/2019 2011 Isometric Drawing Training .doc
72/164
a'3: 1reatin% ew Style
6. #nter a'ri!ation as ote ty-e> enter TienB as te$t of te note and !e!k te Sow Dimension'o$.
7. 1li!k ,< to finis and swit! to drawin%s and &-date +//+P. oti!e tat te tiein lo!ation isdimensioned.
+/+
7/24/2019 2011 Isometric Drawing Training .doc
73/164
a'3: 1reatin% ew Style
Co&umn0)rid 8eference
+. #dit ,-tions for te UserB Style.
0. Sele!t S3D.Drawin%.Dimensions.1ol&mn9eferen!e. Set #na'le to Tr&e
3. n te Str&!t&ral9eferen!eilter field> sele!t te elli-sis ?F@ > tis o-ens te Sele!t ilter dialo%and sele!t filer named *i!ing Isometric $tructura& Co&umn 8eferenceB from 1atalo%iltersIDefa< iltersISP3D Drawin% iltersITy-es of Drawin%sIsometri! Pi-in%.
*. Sele!t te filter a'ove and !li!k ,
7/24/2019 2011 Isometric Drawing Training .doc
74/164
a'3: 1reatin% ew Style
8. Similary> for dis-layin% 4rid 9eferen!es> a filter !an 'e defined for 4rid Systems and o-tion8eferenceLocationB so&ld 'e modified to )rid Linesinstead of Co&umn.
+/3
7/24/2019 2011 Isometric Drawing Training .doc
75/164
a'3: 1reatin% ew Style
Lab14: Labe&s
$3(.Labe&s.Com!onent#ote
Tis node in te style is &sed to o&t-&t notes on te fa!e of te iso. otes !an 'e o&t-&t for seven kindsof o'=e!ts
,'=e!t ,'=e!t -assed to la'el
Pi-e Pi-e -art o!!&rren!e
1om-onent Pi-e !om-onent o!!&rren!e
nstr&ment Pi-e instr&ment o!!&rren!e
S-e!ialty Pi-e s-e!ialty o!!&rren!e
;alve Pi-e !om-onent o!!&rren!e
Pi-e S&--ort an%er assem'ly
9W#D Weld
An en!los&re style !an 'e s-e!ified for te val&e ret&rned 'y te la'el. ;alid val&es are
)#SSA4#
)#SSA4#S(UA9#
)#SSA4#P,T#D
)#SSA4#9,UD
Additionally te val&es may 'e &sed wen te la'el o&t-&t is limited to 3 !ara!ters
)#SSA4#T9A4#
)#SSA4#DA),D
)#SSA4#191#
et &s add a !om-onent note la'el to o&t-&t te valve ta%
+. #dit ,-tions for te UserB style> e$-and te tree to findS3D.a'els.1om-onentote.1om-onentote and ten !li!k in te last 'lank row.
+/*
7/24/2019 2011 Isometric Drawing Training .doc
76/164
a'3: 1reatin% ew Style
0. n te a'elAttri'&te0 !ol&mn> sele!t ;A;#> ten in te la'el !ol&mn> 'rowse to te !atalo% forte 1atalo% a'els and -i!k te Pi-in%I Pi-in% sometri! ;alve Ta% la'el
3. n te messa%e en!los&re !ol&mn> -i!k )#SSA4#S(UA9#
+/5
7/24/2019 2011 Isometric Drawing Training .doc
77/164
a'3: 1reatin% ew Style
*. Save to !atalo% and &-date line +//+P. Go& so&ld see te valve ta%s sown on te iso ne$t tote valves.
$3(.Labe&s.Com!onent#oteConditiona&
a'els.1om-onentote o&t-&ts te val&e ret&rned 'y te la'el dire!tly onto te isometri!. oweversometimes it is desired to o&t-&t a note on te isometri! 'ased on !ertain !riteria. #.%. ta% for valves wit!ertain ta%s are to 'e o&t-&t on te iso '&t for oter ta%s notin% is to 'e o&-&t.Software eval&ates te la'el s-e!ifed in Testa'elame and !om-ares te o&t-&t of te la'el to ea! ofte X ?-i-e@ se-arated val&es in te Test;al&es !ol&mn. Tere is no limit to te n&m'er of val&es '&t te
total len%t of te Test;al&es field m&st not e$!eed 056 !ara!ters. f a mat! is fo&nd> te la'el s-e!ifiedin te ,&t-&ta'elame is eval&ated for te o'=e!t and te res< of te o&t-&t la'el is written to te P1file and terefore to te isometri!.
+. #dit ,-tions for UserB style> e$-and te tree to S3D.a'els.1om-onentote1onditional andinsert Xa row.
0. Set te val&es for te row as sown
3. Save to !atalo% and &-date drawin% +//+P. Go& will see tat a ta% is o&t-&t for te %ate valves'&t not for te !e!k valves.
$3(.Labe&s.>ndConnection
Tese are s-e!ial la'els tat are eval&ated for end !onne!tions of an isometri!. Tere are only two validval&es for a'elAttri'&te3 !ol&mn>
+/6
7/24/2019 2011 Isometric Drawing Training .doc
78/164
a'3: 1reatin% ew Style
or eval&atin% te #D1,#1T,#(UP)#T la'el> te noHHle is -assed to te la'el and tela'el is res-onsi'le for ret&rnin% te data of interest s&! as e&i-ment name> noHHle name> and noHHleattri'&tes s&! as siHe> end -re-aration> -ress&re ratin% et!.or te #D1,#1T,PP## la'el> te -i-in% -art !onne!ted to te last o'=e!t on te !&rrentiso line is -assed to te la'el. t is te la'el wi! ten retrieves te a--ro-riate !ontin&ation item 'asedon te kind of isometri! 'ein% r&n.
Pi-eline isometri! Pi-eline tat te -art 'elon%s to
S-ool isometri! S-ool if -art 'elon%s to s-ool> or -art name if te !onne!ted -art doesnot 'elon% to a s-ool
W2S isometri! W2S so Drawin% ame if -art is assi%ned to W2S tem of ty-e soDrawin%> -i-eline name if it is not assi%ned to a W2S tem
Penetration s-oolisometri!
Pi-eline tat te -art 'elon%s to
+/7
7/24/2019 2011 Isometric Drawing Training .doc
79/164
a'3: 1reatin% ew Style
Lab15: ttribute Brea+s
dd a new brea+ for c&eaning reuirement
&n!tionality is availa'le to o&t-&t attri'&tes-e!ifi!ation 'reaks on te iso. Tis f&n!tionality as two-arts> settin% an AlternativeTe$t and s&--lyin% a la'el to %et te data for -arts.
S-e!ifi!ation attri'&tes are divided into two !ate%ories> standard and mis!ellaneo&s. Te standardattri'&tes are -i-in% s-e!ifi!ation> ins&lation s-e!ifi!ation> tra!in% s-e!ifi!ation and -aintin% s-e!ifi!ation.Tese are o&t-&t for every -art in te P1 file 'y defa< as well as in te eader se!tion of te P1 ?toesta'lis te 'aseline for te entire iso@.
Weter te 'reaks are sown on te iso is a!t&ally !ontrolled 'y te AlternativeT#CT val&es 'ein% set ornot for ea! attri'&te. f te AT#CT val&e is set to a nonn&ll strin%> te strin% is o&t-&t as a -refi$.e.%. or te isometri! sown 'elow> AT#CT 08" was set to 1ASS:
tem ;al&e AT#CT
Pi-in% S-e!ifi!ation S-e! ame 08"
ns&lation S-e!ifi!ation Sort Strin% ;al&e ofns&lation )aterial !ode listattri'&te
0"/
Tra!in% S-e!ifi!ation Sort Strin% ;al&e of eattra!in% ty-e !ode list attri'&te
0"+
Paintin% S-e!ifi!ation Sort Strin% ;al&e of 1oatin%ty-e !ode list attri'&te
0"0
Te mis!ellaneo&s or &serdefined s-e!ifi!ation attri'&tes are set &sin% la'els.
$3(.Labe&s.'isc$!ec
Te mis!ellaneo&s attri'&tes are f&n!tionally identi!al to te standard attri'&tes> e$!e-t tat te &ser isa'le to set te val&e to watever attri'&te is desired. a'els are s-e!ified for ea! of te mis!ellaneo&ss-e!ifi!ations. Te la'els are eval&ated for ea! -i-in% -art and written into te P1 for ea! -art andinto te eader.
+. #dit ,-tions for te UserB style> e$-and te tree to find S3D.a'els.)is!S-e!
+/8
7/24/2019 2011 Isometric Drawing Training .doc
80/164
a'3: 1reatin% ew Style
0. oti!e tat )S1SP#13 is already set to &se a la'el. owever> for tis a' we will !reate tisla'el
n 1atalo% Task> 1reate a 1,) a'el named Pi-in% sometri! 1leanin% 9e&irementB as sownin -i!t&re and ma- te la'el !reated to )S1SP#13.or assistan!e in !reatin% tis a'el -lease !e!k wit yo&r nstr&!tor.
Te la'el is defined as 'elow. avi%ate to te r&n from te -art and sele!t te !leanin%re&irement.
3. Te AT#CT !orres-ondin% to )S1SP#13 is n&m'ered 0"5. #$-and AlternativeTe$ts ands!roll down to noti!e tat te val&e for tis AT#CT is set to 1#A:
+/"
7/24/2019 2011 Isometric Drawing Training .doc
81/164
a'3: 1reatin% ew Style
*. Swit! to Pi-in% task> sele!t te -i-e r&n Unit+6P/+/0+1//3+ and set its !leanin%re&irement to 11+B
5. Swit! 'a!k to Drawin%s and 9e-orts task and &-date drawin% for line +//0P. 1leanin%re&irements 'reak is sown as 'elow.
++/
7/24/2019 2011 Isometric Drawing Training .doc
82/164
a'3: 1reatin% ew Style
Labe&s.Com!onenttts
Tese la'els> if -resent in te style> are eval&ated for ea! -i-in% -art and written to te P1 file. TisP1 file !an ten 'e read 'y Stress Analysis software s&! as 1A#SA9 .
dding Com!onent *ro!erties:
+. n tis a'> yo& will define additional !om-onent -ro-erties to 'e o&t-&t to te P1 file.
0. Sele!t te UserB Style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB
3. #$-and te tree to find S3D.a'els.1om-onentAtts and ten !li!k te 'lank row and add1om-onent Attri'&te 1,)P,#TATT92UT#+ from te dro- down list.
+++
7/24/2019 2011 Isometric Drawing Training .doc
83/164
a'3: 1reatin% ew Style
*. or a'el ame sele!t a'elsM.Ty-e of a'elsMPi-in%M#m'edded 1om-onent )aterialDes!ri-tionsMPort a'elsMS!ed&le Ti!kness +
5. Add into ne$t row 1om-onent Attri'&te 1,)P,#TATT92UT#0
6. or a'el ame a%ainst 1,)P,#TATT92UT#0 sele!t a'elsM.Ty-e ofa'elsMPi-in%M#m'edded 1om-onent )aterial Des!ri-tionsMPort a'elsMS!ed&le Ti!kness 0
7. Save to te !atalo% and &-date line +//+P.
8. Sele!t te do!&ment and &sin% a ri%t mo&se !li!k> sele!t ;iew e$tra!tion data and review teP1 ile to see te S!ed&le ti!kness added to te !om-onents
++0
7/24/2019 2011 Isometric Drawing Training .doc
84/164
a'3: 1reatin% ew Style
".
Tip: These properties could be placed in the material list, in a materialreport and may be of use for fabrication and stress analysis.
++3
7/24/2019 2011 Isometric Drawing Training .doc
85/164
a'3: 1reatin% ew Style
Lab 1": 'ateria& List
sometri! Drawin%s %eneration in SP3D as tree 'asi! o-tions for !onfi%&rin% te )aterial ist ?)T,@.Tese are
+@ ixedK ittle &ser !ontrol over re-ort format. n PDS tis was known as a RSTG#+ )T,0@ ?ariab&eK User !an s-e!ify !ol&mn eadin%s> !ontent and widt K te re-ort layo&t is !ara!ter
'ased ?PDS STG#0@3@ ser (efinedK most fle$i'le re-ort> !ol&mn eadin%s and %rid lines are -la!ed in 'a!kin% seet
and !ol&mn -ositions are defined 'y !oordinates. Users are en!o&ra%ed to &se tis ty-e of )T,.?PDS STG#3@
t is also -ossi'le to &se la'els to define attri'&tes. Several AlternativeTe$ts !an 'e set or &nset to modifyte !ol&mn and se!tion eadin%s for te material list as well as to !ontrol if !ertain elements are sown atall.
'ateria& La%out
)aterialist.i$ed
As indi!ated> for i$ed ayo&t tere is a little &ser !ontrol over re-ort format. owever> !ertain attri'&teson te material lists !an 'e modifiedadded s&! as eader Te$t> 4ro&- S&' eadin% et! &sin%
AlternateTe$ts ?AT#CT@
1) ,-en drawin% +//+P ?S,SIUser Drawin%sIA0IU/+IPro!essIUser@
2) n tis la' for tis i$ed ayo&t )aterial ist we will edit eader Te$t for Des!ri-tion> We will make&se of AT#CT 3/7> 3/8> 3/" to sow a %ro&- s&'eadin% &nder wi! Pi-es> ittin%s V lan%eare listed.
++*
7/24/2019 2011 Isometric Drawing Training .doc
86/164
a'3: 1reatin% ew Style
3) #dit soJPi-eline style in ,-tion 2rowser and for Alternative Te$ts se!tion> modify te AT#CT3/3> 3/7> 3/8 V 3/" as sown in te ima%e. TIP: A blank value for ATEXT ini!ate" that that"pe!ifi! ATEXT i" "uppre""e#
++5
7/24/2019 2011 Isometric Drawing Training .doc
87/164
a'3: 1reatin% ew Style
$) U-date +//+P and o'serve tat eader te$t for des!ri-tion ad 'een !an%ed and also s&'%ro&-in% of te !om-onents are seen for PP#> TT4S and A4#S.
)aterialist.;aria'leayo&t
Wen te style )aterialist.A!tiveist ;aria'le> te so Drawin% will derive its )T, format from te)aterialist.;aria'leayo&t o-tions.
#a! row in te )aterialist.;aria'leayo&t 1ol&mns list s-e!ifies a !ol&mn in te )T,. Te)aterialist.;aria'leayo&t.eaderine te$t is &sed for !ol&mn eadin%s.
++6
7/24/2019 2011 Isometric Drawing Training .doc
88/164
a'3: 1reatin% ew Style
Wen a &ser formats a ;aria'leayo&t )T,> te followin% %&idelines so&ld 'e onored if well formated
te$t is to 'e e$-e!ted.
eave one or more free s-a!es 'etween individ&al !ol&mns.
#a! 1ol&mn entry as a startin% -ostion and a widt. Ad=a!ent !ol&mns so&ld ave at least one ?+@free s-a!e 'etween tem. So if yo&r first !ol&mn 'e%ins in -osition + and as a widt of 5 !ara!ters> tete$ts for tat !ol&mn will o!!&-y -ositions +5. f we leave a s-a!e 'etween tis !ol&mn and te ne$t?-osition 6@> ten we wo&ld want to start te ne$t !ol&mn in -osition 7 or %reater.
Use &meri! &stifi!ation for !ol&mns tat dis-lay de!imal n&meri! val&es.
;aria'le )T,Bs allow te =&stifi!ation of o&t-&t. )ost !ommonly eft =&stifi!ation is &sed> '&t tis !a&sessome -ro'lems for data tat is in te form of de!imal n&m'ers ?ty-i!ally -i-e len%ts@. Alias re!ommendste &se of &meri! =&stifi!ation for !ol&mns tat dis-lay de!imal n&meri! data. &meri! &stifi!ation willali%n te te de!imal !ara!ters of n&m'ers> for im-roved reada'ility. W#4T is anoter e$am-le of an
Attri'&te tat so&ld 'e formatted as &meri!.
To see W#4T data in an )T,> yo& m&st set additional so ,-tions.
2efore W#4T !an 'e in!l&ded in te )aterial ist> te followin% o-tions m&st 'e set.)aterialist.#$!l&deWei%tData AS#)aterialist.Wei%tsStyle Total or ndivid&al.
ote: f )aterialist.#$!l&deWei%tData is set to T9U# or if )aterialist.Wei%tsStyle is set to one> nowei%t will 'e dis-layed in te )aterial ist on te so Drawin%.
Set te eaderine te$t AT#9 formattin% !ol&mns.
Te )aterialist.eaderine o-tion is &sed to s-e!ify te !ol&mn eadin%s and also to define te T,TAwidt ?in !ara!ters@ of te )T,. Te n&m'er of !ara!ters !an 'e !ontrolled 'y -la!in% a RX !ara!ter atte end of te line. so%en will &se te -osition of tis !ara!ter to !ontrol ow m&! s-a!e it reserves forte )T, ?wi! !an 'e -la!ed eiter on te ri%t or left and side of te drawin%> 'y settin% te -ro-erty9i%tSide Tr&e or alse@. Te drawin% area will 'e a&tomati!ally red&!ed to a!!ommodate te widt ofte list.
++7
7/24/2019 2011 Isometric Drawing Training .doc
89/164
a'3: 1reatin% ew Style
t is easiest to !reate tis in an editor &sin% a non-ro-ortional font> s&! as 1o&rier ew. n te te$teditor> first -la!e an inde$in% r&le to sow -osition n&m'ers ?R+03*5678"/ re-eated over and over@. ,nte ne$t line enter te te$t for te eader. Do ,T let te eader te$t for one !ol&mn overlay te'o&ndary 'etween !ol&mns as &ne$-e!ted res<s may res<.
A ty-i!al eader ine e$am-le for te followin% !ol&mn !onfi%&ration is sown 'elow:
ow in an editor> wit ew 1o&rier font> we enter te r&le line and ten te eader te$t 'elow it as yo&wis it to a--ear. f te eader te$t &ses two rows> enter tem on se-arate lines in te te$t editor> ali%nedas yo& wo&ld wis to see tem in te drawin%.
0 1 2 3 4 5 6
123456789012345678901234567890123456789012345678901234567890123
PT Component Size
No. Description (N.S.) T! "T
e$t> we need to =oin te two lines so tat te te$t !an 'e -la!ed in te ,-tions 2rowser as te val&e ofte )aterialist.;aria'leayo&t.eaderine o-tion. To do tis yo& m&st -la!e an endofline !ara!ter ?X@followed 'y a !ontin&ation !ara!ter ?M@ in te last -osition defined on te first row. An endofline!ara!ter is also needed on te se!ond line in te same -ossition as te line a'over. Tis is -osition ofte last !ara!ter of te last !ol&mn ?W#4T@. n tis e$am-le tat is -osition 6*.
0 1 2 3 4 5 6
1234567890123456789012345678901234567890123456789012345678901234
PT Component Size |\
No. Description (N.S.) T! "T |
oin te two lines so tat te te$t !an 'e -la!ed in te ,-tions 2rowser as te val&e of te)aterialist.;aria'leayo&t.eaderine o-tion. To do tis yo& m&st -la!e an endofline !ara!ter ?X@
followed 'y a !ontin&ation !ara!ter ?M@ in te last -osition defined on te first row. An endofline!ara!ter is also needed on te se!ond line in te same -osition as te line a'ove. Tis is -osition of telast !ara!ter of te last !ol&mn ?W#4T@. n tis e$am-le tat is -osition 6*.
After &-datin% te drawin%s> te res<in% )T, will look as follows.
++8
7/24/2019 2011 Isometric Drawing Training .doc
90/164
a'3: 1reatin% ew Style
ote: so%en as s-e!ial 'eavior for te Des!ri-tion attri'&te. nstead of tr&n!atin% te te$t at tes-e!ified n&m'er of !ara!ters> it will wra- te te$t on to as many lines as needed to dis-lay it all.
f no widt is s-e!ified for te Des!ri-tion field> te -ro-erty Defa<Des!ri-tionWidt will 'e &sed to!ontrol te wra--in% of te$t.
or e$am-le> wit Widt 30 !ara!ters
Widt +/ !ara!ters
Lab
+@ #dit ,-tion for te serB style as sown 'elow.
++"
7/24/2019 2011 Isometric Drawing Training .doc
91/164
a'3: 1reatin% ew Style
0@ #$-and )aterialist.;aria'leayo&t. ill in val&es as 'elow
3@ Set )aterialist.A!tiveist to ;aria'le
+0/
7/24/2019 2011 Isometric Drawing Training .doc
92/164
a'3: 1reatin% ew Style
*@ 9efer te )aterialist.varia'leayo&t formattin% %&idelines to format eader ine 1ol&mns,-en Word Pad and Ty-e in 1ol&mn eaders as sown in te ima%e 'elow:
5@ Set )aterialist.;aria'leayo&t.Te$tSiHe to CCar%e
6@ Set followin% o-tions to set Wei%tData
S3D.)aterialist.#$!l&deWei%tData AS#
+0+
7/24/2019 2011 Isometric Drawing Training .doc
93/164
a'3: 1reatin% ew Style
)aterialist.Wei%tsStyle Total or ndivid&al
7@ Set )aterialist.Te$tont 1o&rier new ?Tr&e Ty-e@
8@ U-date isometri! for line +//+P and o'serve te ormat of ;aria'le ayo&t
+00
7/24/2019 2011 Isometric Drawing Training .doc
94/164
a'3: 1reatin% ew Style
a'els.)aterialist
t is -ossi'le to add &- to +// &serdefined material list attri'&tes. Te la'el s-e!ified for ea! will 'eeval&ated for ea! -i-in% -art and te res< of te la'el will 'e written into te P1 and ten!e into teiso.
a':
+@ #$-and a'els.)aterialist and add a row0@ Sele!t )AT#9AUS#9+ as a'elAttri'&te and 2rowse for a'el */+ as dis-layed in te -i!t&re
'elow:
+03
7/24/2019 2011 Isometric Drawing Training .doc
95/164
a'3: 1reatin% ew Style
3@ #$-and )aterialist.;aria'leayo&t*@ 9e-la!e te !ol&mn .S. 'y )AT#9AUS#9+
5@ Save to !atalo% and &-date isometri! for line +//+P. ,'serve tat S!ed&le Ti!kness val&es areret&rned instead of ominal SiHe.
+0*
7/24/2019 2011 Isometric Drawing Training .doc
96/164
a'3: 1reatin% ew Style
)aterialist.UserDefined
n a'> yo& are %oin% to !an%e te fi$ed format material list to a &ser defined style> &sin% fonts.
+@ Sele!t te UsersoA0 style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB
0@ Sele!t te )aterialist and !an%e te a!tive list to User DefinedB
3@ #$-and te )aterialist se!tion and Sele!t )aterialist.UserDefined> !an%e StartC +0> StartG 387> Te$tont Arial?Tr&eTy-e@.
*@ #$-and te )aterialist.UserDefined se!tion and Sele!t )aterialist.UserDefined.1ol&mn> add tefollowin% 5 entries:
+05
7/24/2019 2011 Isometric Drawing Training .doc
97/164
a'3: 1reatin% ew Style
5@ Sele!t )aterialist.UserDefined.TwoSe!tion and !an%e Se!tion0G,ffset +0/> Se!tion+)a$#ntries 0/> Se!tion0)a$#ntries 0/
6@ Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: and !lose te ,-tions2rowser.
7@ U-date drawin% +//+P and o'serve UserDefined ayo&t on left side of te sometri!.
+06
7/24/2019 2011 Isometric Drawing Training .doc
98/164
a'3: 1reatin% ew Style
'ateria& (escri!tion b% Labe&
Several o-tions are availa'le to set )aterial Des!ri-tions &sin% la'els. Te o-tions are:
S3D.)aterialist.UserDefinedPi-e)aterialDes!ri-tionS3D.)aterialist.UserDefinedS&--ort)aterialDes!ri-tion
S3D.)aterialist.UserDefined2olt)aterialDes!ri-tionS3D.)aterialist.UserDefined4asket)aterialDes!ri-tionS3D.)aterialist.UserDefinednstr&ment)aterialDes!ri-tionS3D.)aterialist.UserDefinedS-e!ialty)aterialDes!ri-tionS3D.)aterialist.UserDefined1lam-)aterialDes!ri-tion
#a! of tese o-tions will> if set> re-ort te val&e ret&rned 'y te la'el as te des!ri-tion of te item.
+07
7/24/2019 2011 Isometric Drawing Training .doc
99/164
a'3: 1reatin% ew Style
'ateria&List.CutList
+@ Set )aterialist.1&tist.;isi'le to Tr&e and Set A!tiveist i$ed.
0@ U-date isometri! for line +//0P and 1&t ist so&ld look as 'elow:
+08
7/24/2019 2011 Isometric Drawing Training .doc
100/164
a'3: 1reatin% ew Style
Lab1: 6e&d O!tions
SP3D allows weld n&m'ers to 'e sown on te isometri!. Te format for te weld n&m'ers is &serdefina'le as well. owever> sin!e SP3D mana%es welds in te model> some weld related so%en o-tions
may not 'e a--li!a'le.
$euence we&ds
To t&rn on weld n&m'erin%> first one m&st se&en!e te welds in a -i-eline. To do tis>
+@ Swit! to te Pi-in% task.0@ Sele!t te Se&en!e ,'=e!ts !ommand on te verti!al tool'ar and sele!t te +//+P -i-eline.3@ 1li!k ,< to se&en!e welds
9urn on we&d numbers
1 Swit! to Drawin%s and 9e-orts task2 #dit o-tions on te serIso2style
3 Sear! for all weld related o-tions &sin% te word WeldB in te sear! 'o$4 Set Drawin%s.Welds.SowWeld&m'ers to Tr&e5 U-date isometri! +//+P and see weld n&m'ers
" 1an%e weld n&m'erin% format #dit ,-tions on serIso2style
+0"
7/24/2019 2011 Isometric Drawing Training .doc
101/164
a'3: 1reatin% ew Style
- Sele!t te o-tion $3(.(rawing.6e&ds.6e&d#umberLabe& 2rowse and assi%n la'el *i!ing Isometric 6e&d 9%!e and $euence #umber
7/24/2019 2011 Isometric Drawing Training .doc
102/164
a'3: 1reatin% ew Style
6e&d List
+. Swit! to Drawin%s and 9e-orts task0. #dit o-tions on te serIso2style
3. )a- la'els &nder S3D.a'els.Weldist)a- se!tion as sown in te -i!t&re 'elow:
Te a'el for ma--in% !o&ld 'e fo&nd as seen in te ierar!y 'elow:
+3+
7/24/2019 2011 Isometric Drawing Training .doc
103/164
a'3: 1reatin% ew Style
*. Sele!t UserDefined list for Weldist.A!tiveist
5. Position Weld Attri'&tes &nder Weldist.UserDefined
+30
7/24/2019 2011 Isometric Drawing Training .doc
104/164
a'3: 1reatin% ew Style
6. U-date sometri! +//+P. t so&ld look as 'elow.
+33
7/24/2019 2011 Isometric Drawing Training .doc
105/164
a'3: 1reatin% ew Style
Lab1-: (etai& $+etch
&n!tionality to sow stati! detail sket!es is availa'le. De-endin% on te -art !lass of te o'=e!tsele!ted> a s-e!ified la'el is invoked> if te val&e ret&rned 'y te la'el mat!es te val&e s-e!ified to
!e!k a%ainst> te sym'ol is sown on te isometri!.
+. ,-en te Drawin%s #ditor in M1ommon0DMSa-e0DM2inMSa-e0DServer.e$e. Go& may !reate asort!&t to tis file> name it Drawin% #ditorB and -&t it on yo&r deskto- for f&t&re &se
0. Start re!tan%le tool and draw a 5/ mm $ 5/ mm and an%le / re!tan%le.3. Usin% te te$t 'o$ !ommand> -la!e te word D#TA &sin% 1o&rier ew font at 0 mm te$t siHe as
sown 'elow at ?37> *7@ meas&red from te 'ottom left !orner of te s&are
*. Draw yo&r detail sket! %ra-i!s in te s&are. #.%. draw a !ir!le and two lines
5. Sele!t All %ra-i!s &sin% #ditSele!t All
6. 1reate ew Sym'ol &sin% te 1reate Sym'ol !ommand ?draw tool'ar@.7. Pla!e te ori%in of te sym'ol in te 'ottom left !orner of te re!tan%le
8. Save sym'ol to folder
1:MPro%ram ilesMSmartPlantM3D9efDataMSared!ontentMPmf%soStyleDataM wit nameD#TA+.SG). #$it Drawin% #ditor.
". #dit o-tions for te UserB style and !an%e S&--lementary.DetailSket!es.Pat to 'e1:MPro%ram ilesMSmartPlantM3D9efDataMSared!ontentMPmf%soStyleDataM
+3*
7/24/2019 2011 Isometric Drawing Training .doc
106/164
a'3: 1reatin% ew Style
+/. Set SowDetailSket! to Tr&e
++. ,-en S3D.S&--lementary.DetailSket!es.Sket!)a--in%
+0. 1an%e A4#90.SG) to D#TA.sym V 1an%e Sket!1k;al&e to AssyJ;SJS9JD2J++6
+35
7/24/2019 2011 Isometric Drawing Training .doc
107/164
a'3: 1reatin% ew Style
+3. Save to 1atalo% and &-date te line +//0P. A detail sket! will 'e sown in te to- ri%t !ornerof te isometri!.
+36
7/24/2019 2011 Isometric Drawing Training .doc
108/164
a'3: 1reatin% ew Style
Lab 1: $%mbo& 'a!!ing
t is -ossi'le to ma- Part !lasses> S&--orts> Welds and #nd !onditions to distin!t so%en sym'ol keys.or -art !lasses> it is -ossi'le to s-e!ify different sym'ols for different end !onditions. t is also -ossi'le to
s-e!ify tat te same S
7/24/2019 2011 Isometric Drawing Training .doc
109/164
a'3: 1reatin% ew Style
7@ Save to !atalo% and re&-date 0//3P sometri!. Te S
7/24/2019 2011 Isometric Drawing Training .doc
110/164
a'3: 1reatin% ew Style
*@ 1an%e te S
7/24/2019 2011 Isometric Drawing Training .doc
111/164
a'3: 1reatin% ew Style
5@ Save to !atalo% and &-date line +//0P.
Before: R;aria'le S-rin% ma--ed to S
7/24/2019 2011 Isometric Drawing Training .doc
112/164
a'3: 1reatin% ew Style
Welds
+@ #dit ,-tions in te UserB style
0@ Sele!t S3DISym'ol)APISym'ol)a-?+/57@ and s!roll down &ntil W#D is seen in te Part1lass!ol&mn.
3@ or welds te #ndPre-1ode !orres-onds to 1odeist&m'er of te WeldTy-e !odelist.
*@ 1an%e te S
7/24/2019 2011 Isometric Drawing Training .doc
113/164
a'3: 1reatin% ew Style
5@ Save to !atalo% and &-date line +//0P.
2efore: So- Weld S
7/24/2019 2011 Isometric Drawing Training .doc
114/164
a'3: 1reatin% ew Style
Sym'ol)a-.S&--lement
+@ #dit ,-tions in te UserB style
0@ #$-land S3DISym'ol)APIS&--lementIS&--lement?63@3@ 1an%e te #ndPre-)a- in te row tat !orres-onds to #ndPre-1ode 3/+
from 2# ?2eveled #nd@ to SW ?So!ket Welded #nd@
*@ Save to !atalo% and &-date line +//0P. oti!e 2eveled #nds re-resented as So!ket Welded #nds
+*3
7/24/2019 2011 Isometric Drawing Training .doc
115/164
a'3: 1reatin% ew Style
2efore: 3/+ #ndPre-1ode ma--ed to S
7/24/2019 2011 Isometric Drawing Training .doc
116/164
a'3: 1reatin% ew Style
Create a new s%mbo& +e%
$mart*&ant $%mbo& >ditor-rovides a &serfriendly interfa!e in wi! yo& !an easily !reate new ormodify e$istin% C)'ased or AS1 sym'ol files for &se in S,4# drawin%s. Te software allows yo& to%ra-i!ally define and modify a !om-onent> and ten e$-ort te sym'ol to an S,4# AS1 file so tat it
!an 'e &sed in te isometri! drawin%s yo& %enerate wit SmartPlant 3D
SmartPlant Sym'ol #ditor is delivered on nter%ra- e1&stomer we'site.
+@ 1li!k Sym'ol #ditor.e$e from deskto- to la&n! te $mart*&ant $%mbo& >ditor.0@ rom i'rary #$-lorer> e$-and to All Sym'olsI;alvesI2asi! ;alveI;;YY
3@ 9i%t 1li!k ;;YY and sele!t ew Sym'ol
*@ n ew Sym'ol form> s-e!ify S T&rn on te 1e!k 2o$ to 1o-y ori%inal sym'ol 4ra-i!s2y S-e!ifyin% same S
7/24/2019 2011 Isometric Drawing Training .doc
117/164
a'3: 1reatin% ew Style
5@ Te Librar% >x!&orer &ses !olor to distin%&is 'etween system sym'ols ?tat ave not 'eenredefined@ and !&stomiHed sym'ols. System sym'ols dis-lay in 'la!k te$t> wereas !&stomiHedsym'ols dis-lay in 'l&e te$t.
1li!k ,< on te form. ,'serve tat sin!e te System Sym'ol is 'ein% redefined> te !olor !an%es to2l&e.
6@ ,n te ri%t> Sym'ol 4ra-i!s wo&ld 'e seen as 'elow:
7@ ow> we will makes some !an%es to te Sym'ol 4ra-i!sSele!t te ;alve Sym'ol and o'serve tat 4ra-i!s are all in one 4ro&-. So will we &n%ro&- te sym'olfirst. 1li!k te Sym'ol and from Sym'ol )en&> sele!t Un%ro&- !ommand
+*6
7/24/2019 2011 Isometric Drawing Training .doc
118/164
a'3: 1reatin% ew Style
8@ Sele!t ine Se%ment and delete te lines ?#ditIDelete@ as sown in te ima%e 'elow:
+*7
7/24/2019 2011 Isometric Drawing Training .doc
119/164
a'3: 1reatin% ew Style
"@ Draw some new lines to !an%e te re-resentation of sym'ol.
1li!k Sym'olIDraw ine or 1li!k from 9i''on 2arIDraw ine
+/@ Draw new lines from te Start Point ?4reen Dot@ to look like a lan%ed #nd
+*8
7/24/2019 2011 Isometric Drawing Training .doc
120/164
a'3: 1reatin% ew Style
++@ Similarly> draw te lines at te #nd Point ?9ed Dot@
+*"
7/24/2019 2011 Isometric Drawing Training .doc
121/164
a'3: 1reatin% ew Style
+0@ ow> )ove te end -oints of te line ?i%lited in red@ towards te inner ed%e of te flan%e
After lines are re-ositioned> te sym'ol wo&ld look as 'elow:
+5/
7/24/2019 2011 Isometric Drawing Training .doc
122/164
a'3: 1reatin% ew Style
+3@ Draw a 1ir!le to te !enter of te ;alve Sym'ol.
+*@ #$-ort Sym'ols AS1 to NTrainin% Sym'olsOMPmf%soStyleData
+5+
7/24/2019 2011 Isometric Drawing Training .doc
123/164
a'3: 1reatin% ew Style
+5@ #$it te Sym'ol #ditor.+6@ ,-en S3D Session
+7@ #dit ,-tions in te UserB style
+8@ n S&--lementary.Datailes.Datailes?0@> add a new row> sele!t AS1SG)2,S from dro- down list&nder ileTy-e !ol&mn.or ile Pat> 2rowse for 1&stomS
7/24/2019 2011 Isometric Drawing Training .doc
124/164
a'3: 1reatin% ew Style
+"@ 4ate;alve inserted on Pi-eline +//+P is ma--ed to S
7/24/2019 2011 Isometric Drawing Training .doc
125/164
a'3: 1reatin% ew Style
Lab 2: Circu&ar or rc *i!es
Go& &se te 8oute *i!e!ommand ri''on to model ar! -i-es> s&! as mi%t 'e needed in 4asT&r'ines or in te &!lear ind&stry for !arryin% fl&ids.
Te sometri! for s&! !&rved -i-es wo&ld re&ire settin% some o-tions relevant to !&rved -i-es.
n tis a'> yo& wo&ld not 'e ro&tin% 1ir!&larAr! Pi-in%> '&t wo&ld Paste from !atalo% 1ir!&lar -i-es?already !o-ied to !atalo%@ as instr&!ted in te ste-s 'elow:
+. Define Works-a!e &sin% Plant ilterITrainin% iltersIU/30. )ake s&re PinPoint is ena'led.
3. ;erify te 1oordinate System sele!ted is 4lo'alB on te Pin Point ri''on 'ar.
*.
5. #dit )en& and !li!k Paste from 1atalo%
6. rom )od&les ierar!y> 2rowse )od&lesITrainin%IPi-in% 1lass and sele!t 1ir!&lar Pi-es
+5*
7/24/2019 2011 Isometric Drawing Training .doc
126/164
a'3: 1reatin% ew Style
7.
7/24/2019 2011 Isometric Drawing Training .doc
127/164
a'3: 1reatin% ew Style
". ow sin!e 1ir!&lar Pi-eline is -la!ed in te model aro&nd a vessel> we wo&ld now %eneratesometri! for tis 1ir!&lar -i-eline.
+/. Swit! Task to Drawin%s V 9e-orts
++. #$-and> S,SIUser Drawin%sIA0IU/3IWater> 9i%t 1li!k UserB and #dit o-tions to ,-en,-tion 2rowser
+0. Ty-e in 1&rveB in te sear! 'o$> to ret&rn o-tions related to 1&rved Pi-es
Set val&es for te listed o-tions as 'elow:
Drawin%.Dimensions.1&rvedPi-eDimensionin% StandardDrawin%.ormat.1&rvedPi-eAn%leStyle Wit Dimension
Drawin%.ormat.1&rvedPi-e9adi&sStyle )essa%eDrawin%.ormat.1&rveTresold 5.//
+3. Save ,-tions to 1atalo% and #$it ,-tion 2rowser+*. 9i%t 1li!k UserB Style and 1reate Drawin%s. Drawin%s for Pi-elines &nder Pi-in% System WaterB
wo&ld 'e !reated.
+56
7/24/2019 2011 Isometric Drawing Training .doc
128/164
a'3: 1reatin% ew Style
+5. U-date 1&rvedPi-esB so Drawin%. sometri! so&ld look as 'elow.
+57
7/24/2019 2011 Isometric Drawing Training .doc
129/164
a'3: 1reatin% ew Style
Lab 21:'u&ti7*ort Com!onents
4eneratin% sometri!s for !om-onent wit m<i-le -orts re&ires a s-e!ial S
7/24/2019 2011 Isometric Drawing Training .doc
130/164
a'3: 1reatin% ew Style
*. Sele!t )<i-ort from )od&lesITrainin%IPi-in% 1lassI and 1li!k , /> # / on te Pin Point 9i''on 'ar and sele!tanywere on te s!reen to -aste te R)<i-ort -i-eline from 1atalo%
+5"
7/24/2019 2011 Isometric Drawing Training .doc
131/164
a'3: 1reatin% ew Style
7. )<i-ort Pi-eline so&ld 'e !o-ied &nder A0IU/+IPro!essI
8. ,'serve te )<i-ort !om-onent ?R)<i-ortDia5Way,-tions@ wit 5 Pi-e 9&n on one side and+ Pi-e 9&n on oter side of te !om-onent.
ow> we need to !onfi%&re sometri! ,-tion 'y s-e!ifyin% a S
7/24/2019 2011 Isometric Drawing Training .doc
132/164
a'3: 1reatin% ew Style
++. )<i-ort Drawin% wo&ld 'e !reated as 'elow:
+0. 2efore we &-date )<i-ort sometri!> we need to make !an%es in ,-tions.#ditI ,-tion on RUser Style
+3. )a- S3DPart1lass R)<i-ortDia5Way,-tions to #ndPre-1odeS S
7/24/2019 2011 Isometric Drawing Training .doc
133/164
a'3: 1reatin% ew Style
+60
7/24/2019 2011 Isometric Drawing Training .doc
134/164
a'3: 1reatin% ew Style
Lab22: *ersona& Isogen *re7*rocessor0*ost7*rocessor
Tis la' demonstrates> &sa%e of Personal so%en PrePro!essor -ro%ram to enan!emodify a P1 afterP1 is %enerated and 'efore P1 is fed to so%en for f&rter -ro!essin%.so%en PrePro!essor ?S,4#Pro!essor.e$e@ at r&ntime looks for a ST file avin% -at to an e$ea--li!ation named #nan!e.e$e. #nan!e.e$e as te lo%i! to addmodifydelete attri'&tes from P1.
,'=e!tive of tis a' is to modify 'elow attri'&tes in te P1 and o'serve te res<s on te fa!e ofsometri! Drawin%:
or a 4ate ;alve wit T#)1,D# R?,B,(E(FFFF$
We need S 1+5/> 9#> 22> ,SVG> AST)A0+6W12> trim 8>1rane *7 !an%ed to ETest ;alveE
We need Pi-eline ATT92UT#8 ?l&id 1ode@ *G *rocess!an%ed to 6G 6ater
+63
7/24/2019 2011 Isometric Drawing Training .doc
135/164
a'3: 1reatin% ew Style
Ste-s:
+. Save sometri! +//+P ?SA and P1@
+6*
7/24/2019 2011 Isometric Drawing Training .doc
136/164
a'3: 1reatin% ew Style
0. ,-en saved P1 in note-ad> and !e!k e$istin% attri'&tes ?S it so&ld 'e P> P9,1#SS.
3. ,-en saved sometri! SA> and !e!k S
7/24/2019 2011 Isometric Drawing Training .doc
137/164
a'3: 1reatin% ew Style
1e!k e$istin% 4ate ;alve Des!ri-tion in )T, se!tion.
;erify Pi-eline ATT92UT# 8 ?l&id 1ode@ wi! so&ld 'e P> Pro!ess.
+66
7/24/2019 2011 Isometric Drawing Training .doc
138/164
a'3: 1reatin% ew Style
*. 9i%t 1li!k on S,SIUserDrawin%sIA0IU/+IPro!essIUser and #dit to o-en sometri! ,-tion2rowser
5. 4o to ,-tions &nder soJPi-eline.S&--lementary.A&$iliaryPro%rams
or StartPro%ram> 2rowse and ma- S,4#Pro!essor.e$e lo!ated at 1:MPro%ramilesMSmartPlantM3D9efDataMSared1ontentMPmf%soStyleDataM#nan!eP1MS,4#Pro!essor.e$e
6. Save and !lose ,-tion 2rowser.
7. ,-en folder at 1:MPro%ramilesMSmartPlantM3D9efDataMSared1ontentMPmf%soStyleDataM#nan!eP1M
2elow files so&ld e$ist in te folder yo& o-ened.
+67
7/24/2019 2011 Isometric Drawing Training .doc
139/164
a'3: 1reatin% ew Style
8. P9#P9,1#SS,9.ST file so&ld ave f&ll -at to #nan!eJP1.e$e
". ,-en #nan!eJP1.$ls to review attri'&tes tat as to 'e re-la!ed..
Data in $chemaseet as a !ondition for a ;A;# wit T#)1,D# tat wo&ld 'e eval&ated for!riteria s-e!ified in Com!onent *ro!ertiesSeet
;A;# wit its T#)1,D# s-e!ified in tis Com!onent *ro!ertiesSeet wo&ld 'e mat!ed inP1 at r&ntime
f tere is ;A;# wit T#)1,D# R?,B,(E(FFFF$ fo&nd> -ro-erties !ol&mnss&! as S T#)D#S19PT, et!. wo&ld 'e sear!ed for and if tese -ro-erties are fo&ndit wo&ld modify or if not fo&nd it wo&ld add te val&es from tis seet.
+68
7/24/2019 2011 Isometric Drawing Training .doc
140/164
a'3: 1reatin% ew Style
*i!e&ine *ro!ertiesseet: ATT92UT#8 for Pi-eline +//+P wo&ld 'e re-la!ed in P1 wit W>Water
1lose te #nan!eJP1.$ls.
+/. U-date +//+P. #dit and o'serve te !an%es. Te !an%es so&ld see as 'elow:
+6"
7/24/2019 2011 Isometric Drawing Training .doc
141/164
a'3: 1reatin% ew Style
+7/
7/24/2019 2011 Isometric Drawing Training .doc
142/164
a'3: 1reatin% ew Style
Lab23: 8eference *&anes
Te 9eferen!e Planes o-tion -rovides te a'ility to referen!e virt&al -lanes for !oordinate !allo&ts onisometri! drawin%s. Definition of te -lanes is in a file wit Y.9PD e$tension
or tis a'> a 9eferen!e -lane file ?9efPlanes.9PD@ is already !reated wit some -redefined vol&mesand itBs C>G>Q -lanes.
+@ 9i%t 1li!k on S,SIUserDrawin%sIA0IU/+IPro!essIUser and #dit to o-en sometri! ,-tion2rowser
0@ 4o to S&--lementary.9eferen!ePlanes o-tion.
+7+
7/24/2019 2011 Isometric Drawing Training .doc
143/164
a'3: 1reatin% ew Style
3@ 1an%e R#na'led val&e to Tr&e.*@ or te file Pat> -oint to te NTrainin% Sym'olsOMPmf%soStyleDataM9efPlanes.9PD.5@ 1an%e te 1oordStyle and 1oordStyleAto!ationPts val&e to 9elative 1oordinates.6@ 4o to Alternative Te$ts and set ATe$t 3"8 to ;, L
7@ Save !an%es to te ,-tions 2rowser and !lose te 'rowser.8@ U-date Drawin% +//+P"@ oti!e tat te ;ol&me name ?U/+@ listed in te 9ef-lanes.9PD is now sown in te !oordinate
reado&t. Also note tat te !oordinates are listed as distan!es from C> G and Q -lanes of terelevant vol&me.
;ol&me and its Planes for Unit U/+ s-e!ified in 9ef-lanes.9PD file.
1oordinates wo&ld 'e seen as sown in te -i!t&re 'elow:
+70
7/24/2019 2011 Isometric Drawing Training .doc
144/164
a'3: 1reatin% ew Style
Si$ Alternative Te$t re!ords ave 'een assi%ned to o&t-&t 9elative dire!tions ?**3>***>**5>**6>**7>**8@
Z is s&'stit&ted wit te 9eferen!e Plane ameL is s&'stitited wit te distan!e from te nearest 9eferen!e Plane
+73
7/24/2019 2011 Isometric Drawing Training .doc
145/164
a'3: 1reatin% ew Style
A ty-i!al 9PD file wo&ld look as 'elow:
+7*
7/24/2019 2011 Isometric Drawing Training .doc
146/164
a'3: 1reatin% ew Style
Lab24: *erformance na&%sis 9oo&
sometri! Performan!e lo% Analyser is a tool wi! -rovides an easy metod of identifyin%la'elsfilersre-ort !ontri'&tin% to -oor -erforman!e of sometri!s.
n %eneral> if a s-e!ifi! attri'&te from )odel1atalo% is to 'e seen on sometri!> a'els are !reated in1atalo% and !onfi%&red witin sometri! ,-tion 2rowser to dis-lay te -ro-erty val&es ret&rned 'y tela'el on sometri! drawin%)T,1&t iste&tral ileDrawin% rame and so on. n -ro!ess of !reatin%tese la'els> sometimes &ser may &nknowin%ly !reate s-e!ifi! la'els tat mi%t introd&!e a &%e im-a!ton -erforman!e of sometri!s.
A %ood e$am-le of s&! -oor la'el wo&ld 'e a S( la'el. t is re!ommended to avoid &sin% S( a'elsin sometri! ,-tion 2rowser. 1,) la'els are always te 'est !oi!e for o&t-&ts. f 1,) a'els arelimited for some s-e!ifi! -ro-erties> ;2 a'el so&ld 'e !onsidered as a ne$t o-tion after 1,) a'el.
Te -erforman!e !an also ave im-a!t from filters and re-orts tat are ma--ed in sometri! ,-tion2rowser. So tis tool el-s in identifyin% -oor filters and 9e-orts too.
sometri! Performan!e lo% Analyser !an 'e downloaded from e1&stomer we'site. or more details-lease !e!k wit yo&r nstr&!tor or lo% a Servi!e 9e&est on SP3D S&--ort.
Tis la' wo&ld %ive yo& andson e$-erien!e on settin% &- te tool and on dia%nosin% te lo%s.
+. or tis trainin% la'> te sometri! Performan!e lo% Analyser ?sometri!Perfo%Analyser.e$e@ is ke-tat [Sared1ontentIMPmf%soStyleDataMPmf%soStyleDataMsometri!Perfo%Analyser.e$e
0. Set&- an environment varia'le !alled RP#9JS1#A9, as sown in te -i!t&res 'elow:;aria'le val&e is te filename of te lo% file.or e.%.> f te val&e is RP#9so> lo% file wit named as JP#9so.-l% will 'e !reated in T#)P
a@ Ste-s in Windows 7 for settin% &- environment varia'le:
9i%t 1li!k R1om-&ter I Pro-erties
+75
7/24/2019 2011 Isometric Drawing Training .doc
147/164
a'3: 1reatin% ew Style
'@ Sele!t Advan!ed System settin%s
!@ Under Advan!e Ta'> 1li!k #nvironment ;aria'les
d@ 1reate a new System ;aria'le !alled RP#9JS1#A9, and ;aria'le val&e as RP#9so
+76
7/24/2019 2011 Isometric Drawing Training .doc
148/164
a'3: 1reatin% ew Style
3. ,-en S3D session and &-date one or many sometri!s tat yo& want to analyse*. 1lose S3D session.5. Go&Bll find te JP#9so.-l% file in T#)P.6. 1o-y it to anoter folder and %ive it a s&ita'le name ?e.%. Trainin%.-l%@.7. 9&n soPerfo%Analyser.e$e from
[Sared1ontentIMPmf%soStyleDataMPmf%soStyleDataMsometri!Perfo%Analyser.e$e and 'rowse tote folder !ontainin% te Y.-l% file.
8. Sele!t te lo% file from te dro- down list and o'serve te !a-t&red data for &m'er of sometri!s>Time to e$e!&te te total n&m'er of sometri!s> Avera%e time -er so> ndivid&al a'el names>Per!ent and Time.
Te !olo&rs indi!ate la'elsfiltersre-orts tat take a si%nifi!ant -ro-ortion of te time.9ed I 0/Gellow I +/
Dark 4reen I 54reen I +.
". n tis Trainin% -lant> tere are not any -oor -erformin% la'elsMfiltersMre-orts> owever it %ives yo& a'asi! idea of ow te tool is f&n!tionin% and ow it dis-lays data a'o&t a'elsMiltersM9e-orts names>a!t&al time and its overall -er!enta%e.
+/. ,n!e done Analysin% te tool> Disa'le -erforman!e lo%%in% 'y =&st removin% or renamin% teenvironment varia'le.
Additional Points to 9ememe'er:
S3D will a--end to J%PE&'JS1#A9,I.-l% every time it is r&n so itBs 'est to delete it o&t of
T#)P 'efore yo& r&n S3D.
soPerfo%Analyser modifies te lo% f iles in te folder yo& -oint it at and !reates R.!sv files. f telo% file yo& !o-y into te folder is !alled> for e$am-le> Rtest.-l% ten it will try to !reate Rtest.!sv.f Rtest.!sv already e$ists ten it will do notin%.
Always !lose S3D 'efore !o-yin% te lo% file. Te lo% will not 'e !om-letely written to disk &ntil
S3D is !losed
+77
7/24/2019 2011 Isometric Drawing Training .doc
149/164
a'3: 1reatin% ew Style
Lab25: 6B$ Isometrics
Sin%le seet isometri!s !an 'e e$tra!ted &sin% te work 'reakdown str&!t&re. or tis a style is alreadys&--lied> '&t a -a!ka%e needs to 'e !reated.
Creating a 6B$ !ac+age
+. Swit! to Drawin%s and 9e-orts task.0. Add a new folder &nder te root of te -lant !alled Pa!ka%esB. ?Tis folder was !reated in a'5@3. 9i%t!li!k on Pa!ka%es folder and add a new Pi-in% sometri! Drawin%s 'y (&ery !om-onent.
9ename te !om-onent so W2SB*. Set&-F so W2S and in te filter field sele!t )oreF5. #$-and te tree till te 1ommonB folder as sown in te -i!t&re
6. 1reate a new filter named 4ro&- so Drawin%B tat sele!t W2S items of te Ty-e so Drawin%sa'ri!ationB 'y sele!tin% te followin%,'=e!t Ty-e: ?1ommon K W2S tems@Pro-erties: ?1ommon K W2S tems@ K Dire!t Pro-erty of ,'=e!t Ty-e K ?W2S P&r-ose@ so
Drawin% a'ri!ation
+78
7/24/2019 2011 Isometric Drawing Training .doc
150/164
a'3: 1reatin% ew Style
+7"
7/24/2019 2011 Isometric Drawing Training .doc
151/164
a'3: 1reatin% ew Style
7. Sele!t te filter to &se it in te -a!ka%e8. n te style field> sele!t te style soJW2SB". Save Pa!ka%e as so W2SB
+8/
7/24/2019 2011 Isometric Drawing Training .doc
152/164
a'3: 1reatin% ew Style
Creating Isometric (rawings b% 'anua&&% ssigning ObHects
1reate isometri! drawin%s for te -i-eline 437* in Unit 4of yo&r works-a!e 'y man&ally assi%nin%-i-in% -arts to te !reated W2S items. After !reatin% te isometri! drawin% for te !reated W2S items teview will resem'le i%&re +.
Figure 1: Output: Isometric Drawing for the WBS Group of Pipeline 40!P
2efore 'e%innin% te -ro!ed&re for !reatin% isometri! drawin%> !laim all te -i-in% o'=e!ts of a -i-eline437*of Unit 4to an a!tive -ro=e!t *E7 for assi%nin% -i-in% o'=e!ts to a!tive -ro=e!t. Ten man&ally!reate a W2S item &nder te a!tive -ro=e!t and assi%n all te -i-in% o'=e!ts to te !reated W2S item.
Steps:
2efore 'e%innin% te -ro!ed&re:
+. Define yo&r works-a!e to dis-lay Unit 4G!oordinate system 4 C$G and*roHectsin te 6B$ierar!y. n yo&r trainin% -lant> sele!t 4 and 6B$ Items !om-o&nd filter from *&ant i&ters I9raining i&tersin te $e&ect i&terdialo% 'o$.
0. )ake s&re yo& are in te *i!ingtask and te A!tive Permission 4ro&- is set to *i!ing.
+8+
7/24/2019 2011 Isometric Drawing Training .doc
153/164
a'3: 1reatin% ew Style
'anua&&% ssigning *i!ing ObHects to an ctie *roHect:
+. Sele!t te && o-tion inte Locate i&terdro-down list.
0. n te 6or+s!ace >x!&orerwindow> e$-and te ierar!y 2 I4 I*rocess.
3. 9i%t!li!k te -i-eline system 437*and !li!k te $e&ect #ested!ommand in te men&> to sele!tall te -i-in% o'=e!ts in te %ra-i! view.
*. Sele!t te 'oreo-tion in te ctie *roHectdro-down list on te tool'ar to s-e!ify te a!tive-ro=e!t.
5. Te ctie *roHectdialo% 'o$ a--ears. Sele!t te (atabaseo-tion to see all te W2S -ro=e!ts inte dialo% 'o$ and ten sele!t *E7> to s-e!ify *E7as an a!tive -ro=e!t.
6. 1li!k OD on te ctie *roHectdialo% 'o$. Te sele!ted a!tive -ro=e!t so&ld dis-lay.
7. Sele!t te *roHect IC&aim !ommand> to asso!iate te sele!ted -i-in% o'=e!ts wit te a!tive-ro=e!t *E7.
8. After te !laim -ro!ess is !om-lete> SP3D dis-lays te C&aim dialo% 'o$. 1li!k C&oseto !lose tedialo% 'o$.
'anua&&% ssigning *i!ing ObHects to 6B$ item:
+. n te Works-a!e #$-lorer> sele!t te W2S ta' and e$-and P"" I so a'ri!ation.
0. 9i%t!li!k te so a'ri!ation system in te Works-a!e #$-lorer and sele!t te 1reate W2S tem!ommand from te men&> to !reate a new W2S item in te system so a'ri!ation.
3. Sele!t te -ro-erty s-e!ifi!ations> and !li!k , sele!t te System ta' to e$-and A0 I U/* I Pro!ess andsele!t te -i-eline system */3P. Tis will sele!t te -i-eline */3P in te %ra-i! view.
5. Sele!t te Pro=e!t I Assi%n to W2SF !ommand. Tis !ommand !reates a relationsi- 'etweenall te !om-onents of te sele!ted -i-eline system and a sele!ted W2S item.
6. Te Assi%n to W2S dialo% 'o$ a--ears. n te Assi%n to W2S dialo% 'o$> e$-and P""Isoa'ri!ation and sele!t te W2S item P""/+ to wi! te -i-in% o'=e!ts need to 'e assi%ned.Ten> !li!k ,
7/24/2019 2011 Isometric Drawing Training .doc
154/164
a'3: 1reatin% ew Style
8. 1reatin% sometri! Drawin% from W2S item:
". Swit! to te Drawin%s and 9e-orts task from te Tasks I Drawin%s and 9e-orts !ommand to!reate isometri! drawin%s for te !reated W2S items.
+/. n te )ana%ement 1onsole> e$-and te drawin% ierar!y to Unit /+ I sometri!s I so W2Ssometri!s. 9i%t !li!k te so W2S sometri! !om-onent and sele!t Set &-. n te -a!ka%esele!t so W2SB and in ilter sele!t RP""?W2S@ lo!ated &nder Plant iltersITrainin% ilters. it,
7/24/2019 2011 Isometric Drawing Training .doc
155/164
a'3: 1reatin% ew Style
Creating Isometric (rawings b% utomatica&&% ssigning ObHects
1reate isometri! drawin%s for te -i-e -arts 'elon%in% to te -i-eline 117* in Unit 1of yo&rworks-a!e 'y a&tomati!ally assi%nin% -i-in% -arts to te !reated W2S items. After !reatin% te isometri!drawin% for te !reated W2S items te view will resem'le i%&res 0 and 3.
i%&re 0: ,&t-&t: sometri! Drawin% for te irst W2S 4ro&-
+8*
7/24/2019 2011 Isometric Drawing Training .doc
156/164
a'3: 1reatin% ew Style
i%&re 3: ,&t-&t: sometri! Drawin% for te Se!ond W2S 4ro&-
2efore 'e%innin% te -ro!ed&re for !reatin% isometri! drawin%> yo& will first !laim and man&ally assi%n-i-in% o'=e!ts to an a!tive -ro=e!t. Go& !laim all te o'=e!ts to a W2S -ro=e!t 'efore yo& r&n te )rou!*i!e *arts!ommand on te o'=e!ts to a&tomati!ally assi%n tem to !reate W2S item.
Ste-s:
2efore 'e%innin% te -ro!ed&re:+. Define yo&r works-a!e to dis-lay Unit U/+> !oordinate system U/+ 1S> and Pro=e!ts in te W2S
ierar!y. n yo&r trainin% -lant> sele!t U/+ and W2S tems !om-o&nd filter from Plant ilters ITrainin% ilters in te Sele!t ilter dialo% 'o$.
0. )ake s&re yo& are in te Pi-in% task and te A!tive Permission 4ro&- is set to Pi-in%.
'anua&&% ssigning *i!ing ObHects to ctie *roHect:
Assi%n all te -i-in% o'=e!ts of -i-eline +//+P to an a!tive -ro=e!t P"" in Unit U/+ of yo&r works-a!e.
+. n te Pi-in% task> sele!t te *i!ing *artso-tion in te Locate i&terdro-down list on teCommontool'ar to sele!t only te -i-in% -arts in te %ra-i! view.
0. Use te Inside fenceo-tion on te Commontool'ar to sele!t all -i-in% -arts 'elon%in% to te-i-eline 117*and sele!t te -i-in% -arts.
3. To s-e!ify te ctie *roHect> sele!t te 'oreo-tion in te ctie *roHectdro-down list onte main tool'ar.
+85
7/24/2019 2011 Isometric Drawing Training .doc
157/164
a'3: 1reatin% ew Style
*. Te ctie *roHectdialo% 'o$ a--ears. Sele!t te (atabaseo-tion to see all te W2S -ro=e!ts inte dialo% 'o$. And ten sele!t *E7to s-e!ify *E7as an a!tive -ro=e!t.
5. 1li!k OD in te ctie *roHectdialo% 'o$. Te sele!ted a!tive -ro=e!t so&ld a--ear> on te maintool'ar.
6. Sele!t te *roHect A C&aim !ommand to asso!iate te sele!ted -i-in% o'=e!ts wit te a!tive-ro=e!t *E7.
7. After te !laim -ro!ess is !om-lete> SP3D dis-lays te C&aim dialo% 'o$. 1li!k C&oseto !lose tedialo% 'o$.
A&tomati!ally Assi%nin% Pi-in% ,'=e!ts to te 1reated W2S tems:
4ro&- te -i-in% -arts into dis!rete sets 'y &sin% teir -ro-erties in a la'el definition &ery. n tis !ase>te dis!rete sets are te W2S items. Use te followin% s-e!ifi!ations for te &ery &-on wi! te
%ro&-in% of o'=e!ts will 'e 'ased:
sometri! Seet &m'er: Pi-e Part attri'&te
+. Sele!t te -i-in% -arts of te -i-eline 117*> as sown in i%&re *> to assi%n tem to isometri!seet n&m'er .
Figure 4: Piping Parts of Pipeline 1001!P
0. 9i%t!li!k te sele!ted -arts and o-en te -ro-erties dialo% 'o$ to assi%n te sele!ted -i-in%-arts to an isometri! seet n&m'er for !reatin% an isometri! drawin%. and !li!k OD.
3. ow sele!t te remainin% -i-e -arts 'elon%in% to 117*> as sown in i%&re 5.
+86
7/24/2019 2011 Isometric Drawing Training .doc
158/164
a'3: 1reatin% ew Style
Figure ": #emaining Selecte$ Part of Pipeline 1001!P
*. 9i%t!li!k te sele!ted -i-e -arts and o-en te $e&ection *ro!ertiesdialo% 'o$ to assi%n temto anoter isometri! seet n&m'er Bfor !reatin% an isometri! drawin%.