Post on 25-Feb-2021
ww
w.if
m.c
om
fluid sensors and diagnostic
systems
bus, identification
and control systems
position sensors
and objectrecognition
Automation Productsfor the Automotive Industry
Global Catalogue2011/2012
The automotive catalogue of ifm electronic gmbh:
Manual and guidebook for youreveryday job.
Support for project processing.
Assistance for repair and maintenance.
Reference for technical information.
ifm electronic – active as a globally recognised sensor manufacturer in the auto-motive industry for many years - provides you in this automotive catalogue with anoverview of the products on the basis of current product and project specifications ofall renowned car manufacturers worldwide.
This ifm catalogue should help you to define the optimum products for your tasks.Whether just sensors or the appropriate mounting solution – ifm electronic alwaysoffers the right solution.
For the sake of optimum transparency ifm electronic has combined all products fromthe worldwide product range which are suitable for the automotive industry in thisspecially adapted catalogue.
Whether for planning, projects or repair / maintenance: Here you can get a reliableand fast overview and make the right selection.
Trust the decades of experience of the ifm specialists in the automotive area.
We will support you!
visit our website:
www.ifm.com
Over 70 locations worldwide – at a glance at wwww.ifm.com
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-Mail: info@ifm.com
ifm – the company 6 - 7
General information 8 - 12
Standards and approvals / list of articles 14 - 29
Sensors for specific applications 30 - 33
Inductive sensors 34 - 89
Capacitive sensors 90 - 100
Magnetic sensors 102 - 106
Cylinder sensors 108 - 115
Valve sensors 116 - 120
Photoelectric sensors 122 - 185
Object recognition 186 - 194
Encoders 196 - 199
Evaluation systems 200 - 207
Evaluation systems for safety and EX 208 - 216
Level sensors 218 - 228
Flow sensors 230 - 246
Pressure sensors 248 - 268
Temperature sensors 270 - 282
Diagnostic systems 284 - 289
Bus system AS-interface 290 - 302
Identification systems 304 - 315
Power supplies 316 - 321
Connection technology 322 - 339
ifm – worldwide addresses 340 - 341
The company in your vicinity.
State-of-the-art communication.
With the right address – www.ifm.com – only a mouse click separates you from theworld of automation technology. See the power of our products in interactiverepresentations. Gain an impression with 3-dimension-al views of our units. Down-load CAD drawings for direct integration in your applications. Or order online inifm’s e-shop - fast, convenient and reliable.
We are there for you.
Close contact with our customers is part of our success. Therefore we haveconsistently developed our sales network right from the start. Today ifm electronic isrepresented in more than 70 countries – close to you! With application advice andservice at the heart of our operation. For the introduction of new products andtechnologies we support you with workshops and seminars in our training centres orin your plant.
Security by success.
Since its foundation in 1969 ifm electronic has constantly grown, now having morethan 3300 employees worldwide, and achieved a turnover of more than EUR 340million in 2009. This success gives you the security of having a reliable partner for theimplementation of your automation projects. Comprehensive service and a warrantyof up to 5 years on standard units are just two examples of this reliability.
sale
s de
velo
pmen
t in
mill
ion
EU
R
2000 2010199019801970
100
0
200
300
400
500Turnoverdevelopmentsince 1970.
ifm – the company
6
branch officetrade partner
ifm – the company
7
A sign of innovation.
Not only components.
ifm stands for a large range of different sensors and systems for automation. Ourrange of of more than 7,800 articles guarantees flexibility and compatibility. So thereis always a reliable solution for your automation projects – from the individual sensorwith practical accessories to the complete system.
Availability guaranteed.
Your deadlines matter to us. That is why we are constantly optimising our productionprocesses in order to be able to quickly and flexibly produce large quantities at aconstantly high quality – and to continue to shorten delivery times. Your order isdispatched via our centralised logistics centre reliably and on time.
Quality as part of our philosophy.
The quality standard of our products is an integral part of our company philosophy.And we guarantee it! So we provide you, the users, with a maximum degree ofsecurity: By means of our own production technology, ifm film technology, as well asby means of extensive quality assurance measures such as 100 % final testing.By quality we understand, for example, ecologically conscious production – Made inGermany!
The developmentof innovativeproducts is oneof our corecompetences.Under the name ofi-step we havecome up with anew product gene-ration whichimplements sophi-sticated technolo-gies in industriallycompatible andeasy to handleproducts. Fromhigh-quality stan-dard solutions toproducts speciallytailored to therequirements ofthe individualindustries – frommobile machinesto the foodindustry.
General information
Product selectors and further information can be found at: www.ifm.com
8
www.ifm.comInformation around the clock andaround the globe in 22 languages on the internet.
• Information
- product innovations- company news- exhibition info- locations- jobs
• Documentation
- data sheets- operating instructions- manuals- approvals- CAD data
• Communication*
- request for documents- recall service- live advice- newsletter
• Selection
- interactive product selection aids- configuration tools- data sheet direct
• Animation
- virtual product animations- flash movies (video sequences)
• Application
- applications- product recommendations- calculation aids
• Transaction*
- e-shop processing- e-procurement catalogues- B2B services
*Some offered information is available country-specific
General information
Product selectors and further information can be found at: www.ifm.com
9
Convenient order processingvia the e-shop** on the internet.
Secured authentication
Customer-related priceindication
Real time availability check
Personal product favourites
Online parcel tracking
Individual order history
Convenient quick input form
Simple order processing
Management of shippingaddresses
Confirmations by e-mail
** Already available in many countries.
General information
Product selectors and further information can be found at: www.ifm.com
10
Press shop: Detection of coils
In press shops optical sensors are usedmore and more often besides the tried-and-tested inductive sensors for posi-tioning coils and verifying their position.It is in particular the O1D distance sensor that is distinguished by its smallhousing and long range.
Press shop: Position verification
To verify the position of the sheet metalparts in hydraulic presses, both induc-tive sensors and the control unit for partseat monitoring of type PS7570 are perfectly suited. Safety technology fromifm is an optimum choice for the safety-related areas around the presses.
Body-in-white: Welding
For many years, weld-immune, electro-magnetic field immune, and Teflon-coated full metal sensors have estab-lished in the field of body-in-white asreliable problem solvers.
Other innovative products such as opti-cal sensors, ring sensors and leakagesensors complete the ifm product rangefor body-in-white.
Body-in-white: Riveting, gluing, punching, joining
Robust, reliably functioning sensorswith a long life used in punching, rivet-ing and joining processes ensure highquality of the attachment and the indi-vidual body work. They contribute theirshare to implementing minimum gapdimensions in body-in-white.
General information
Product selectors and further information can be found at: www.ifm.com
11
Paint shop: Painting bodies
The spray booths demand a lot of thesensors used. The high protection ratingIP67 / IP69K is required. Processed mate-rials from the ifm range ensure a smoothand reliable painting process.
Paint shop: Body conveying
Inductive sensors in a rectangular housing of type IMC (40 x 40 mm) andtype IDC (80 x 80 mm) do their job reliably and accurately in conveyingsystems. They are supported by thetried-and-tested optical sensors of typesO4 and O5, known for their smalldimensions and high performance.
Assembly: Wheel assembly on anelectronic suspension conveyor
Inductive sensors and photoelectric sen-sors, pressure sensors and level sensorsand many other components of the ifmrange of products support the assemblyprocesses.
Assembly: Wheel assembly
Precision is demanded for the “mar-riage”, i.e. when chassis and body are joined.
Employees have to put together bothparts in relatively short cycle times andthey are again supported by ifm sen-sors.
General information
Product selectors and further information can be found at: www.ifm.com
12
Powertrain: Gearbox assembly
During the mounting of gearboxes andgear parts it is important to assemblethe parts accurately and completely.This application can, for example, besolved by using the O1D distance sensoror the O2D object sensor, with millime-tre accuracy. By means of RFID tech-nology it is known exactly where thegearbox is at any given time.
Powertrain: Power pack monitoring
In power packs of powertrain plantspressure, temperature, level, leakageand flow of media have to be moni-tored and controlled.
Quality, robustness and precise mea-surement results are required. The ifmsensors reliably meet these require-ments.
Building system automation: Bearing monitoring
The early detection of bearing damageat the motor and fan ensures that mea-sures for replacement can be planned indue course and that sudden downtimesare avoided. Today, condition-basedmonitoring has become a familiar concept and is implemented seamlesslythanks to ifm efector octavis.
Building system automation: Air consumption in buildings
Compressed air consumption and leakage are cost factors that are not tobe underestimated. These applicationsare solved by the user-friendly and easy-to-mount compressed air meter efectormetris from ifm. With this innovativesensor considerable cost reductions arepossible.
General information
Product selectors and further information can be found at: www.ifm.com
13
3A 3A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporationdedicated to advancing hygienic equipment design for the food, beverage, and phar-maceutical industries.
AS-i Actuator-Sensor Interface. Bus system for the first binary field level.
ATEX Atmosphère Explosible. ATEX comprises the directives of the European Union in thefield of explosion protection. On the one hand there is the 94/9/EC ATEX productdirective and on the other hand the 1999/92/EC ATEX operation directive.
CCC CCC (China Compulsory Certification) is a compulsory Chinese certification for cer-tain products put on the market in China. Which products are concerned is specifiedin a catalogue created by the Chinese authorities.
cCSAus Testing a product by CSA according to the safety standards applicable in Canada andthe USA.
CE Conformité Européenne. By affixing the CE marking to a product, the manufacturerdeclares that it meets EU safety, health and environmental requirements.
cRUus Testing components by UL according to the safety standards applicable in Canadaand the USA. Components can be used when the „condition of acceptability“ iscomplied with for the final product.
CSA Canadian Standards Association. A non-governmental Canadian organisation thatsets standards and tests and certifies products for their reliability. By now it is activeworldwide.
cULus Testing components by UL according to the safety standards applicable in Canadaand the USA.
DIBt (WHG) Deutsches Institut für Bautechnik (Federal Water Act). The Federal Water Act (WHG)is the essential part of the German law relating to water . It contains provisions forthe protection and use of surface water and ground water and also regulationsabout the expansion of waters, water planning and flood protection.
e1 Approval by the Kraftfahrt-Bundesamt (German Federal Motor Transport Authority).The e1 type approval by the German Federal Motor Transport Authority certifies thatthe units comply with the automotive standards. Units with this marking are allowedto be mounted on vehicles without expiry of their operating permit.
EHEDG European Hygienic Engineering & Design Group. US-American supervisory authorityfor food and drugs. This authority grants approvals for products and materials usedin the food and pharmaceutical industries.
FDA Food and Drug Administration. US-American supervisory authority for food anddrugs. This authority grants approvals for products and materials used in the foodand pharmaceutical industries.
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
14
FM Factory Mutual Research. A US-based insurance company that specializes in loss pre-vention services in the property insurance market sector. They provide material rese-arch, material testing and certifications in the field of fire and explosion protection.
PROFIBUS Process Field Bus. Fieldbus system for important data quantities. It is available in seve-ral versions such as Profibus FMS, DP or PA. Profibus DP can be used over longerdistances, e.g. as fieldbus for AS-i.
TÜV Technischer Überwachungs Verein (technical inspection association). The GermanTÜV is a private-sector body carrying out technical safety tests that are stipulated bygovernment laws or instructions.
UL Underwriters Laboratories. An organisation founded in the USA for testing and certi-fying products and their safety.
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
15
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
16
Orderno.
Approvals Cataloguepage
AC003S CE, CUL 295
AC004S CE, CUL 295
AC010S CE 295
AC031S CE, CUL 295
AC032S CE, CUL 295
AC1154 CE 297
AC1207 CE, CUL 293, 319
AC1212 CE, CUL 293, 319
AC1218 CE, CRUUS 293, 319
AC1223 CE 293, 319
AC1236 CE, CRUUS, CUL 318
AC1244 CE, CRUUS, CUL 319
AC1326 CE, CUL 292
AC1327 CE, CUL 292
AC1331 CE, CUL 292
AC1332 CE, CUL 292
AC1335 CE, CUL 292
AC1337 CE, CUL 292
AC1355 CE, CUL 292
AC1356 CE, CUL 292
AC1365 CE, CUL 292
AC1366 CE, CUL 292
AC1375 CE, CUL 292
AC1376 CE, CUL 292
AC1401 CE, CUL, Profinet 292
AC1402 CE, CUL, Profinet 292
AC2086 CE 294
AC2211 CE 293
AC2212 CE 293
AC2250 CE, CRUUS 293
AC2251 CE, CRUUS 293
AC2252 CE, CRUUS 293
AC2254 CE, CRUUS 293
AC2257 CE, CRUUS 293
AC2264 CE, CRUUS 293
AC2410 CE, CUL 294
AC2412 CE, CUL 294
AC2457 CE, CUL 294
AC2459 CE, CUL 294
AC3000 297
AC4000 CE 297
AC4002 CE 297
AC5000 CUL 294
AC5003 CUL 294
AC5005 296
AC5010 CUL 294
AC5011 CUL 295
AC5204 CE, CUL 294
AC5208 CE, CUL 294
AC5215 CE, CUL 294
Orderno.
Approvals Cataloguepage
AC5228 CE 295
AC5246 CE 295
AC5251 CE 295
AC5270 CE 295
DA0001 CE 204
DA0116 CE, CUL 204
DD0001 CE 203
DD0008 CE 203
DD0022 CE 203
DD0116 CE, CUL 204
DD0122 CE, CUL 204
DD2001 CE 202
DD2002 CE 202
DD2003 CE, CUL 202
DD2006 CE, CUL 202
DD2103 CE, CUL 202
DI0001 CE 204
DI5003 CE 204
DI6001 CE, CUL 204
DL2003 CE, CUL 205
DN0001 CE 318
DN0012 CE 318
DN0200 CE 318
DN2032 CE, CUL 318
DN2033 CE, CUL 318
DN2035 CE, CUL 318
DN2036 CE, CUL 318
DN2134 CE, CUL 318
DS2001 CE 202
DS2003 CE, CUL 203
DS2005 CE, CUL 203
DTA100 CE, CUL 296, 314
DTA101 CE, CUL 296, 314
DW2003 CE, CUL 203
DW2004 CE 203
DX2002 CE 205
DX2012 CE 205
E10013 326
E10015 71, 96
E10016 70
E10017 262, 277, 70
E10076 205, 72, 96
E10077 205, 72, 96
E10137 326
E10154 71
E10190 327
E10200 327
E10437 330
E10730 298, 314, 73
E10735 105, 71, 96
Standards and approvals /list of articles
(CCC) = CCC approval is not required
17
Orderno.
Approvals Cataloguepage
E10736 105, 135
E10737 205, 72, 96
E10741 71
E10742 72
E10743 72
E10752 105
E10753 105
E10802 296
E10803 296
E10806 71
E10807 72
E10808 72
E10848 71
E11030 95
E11033 95
E11034 95
E11036 95
E11047 105, 71
E11048 105, 72
E11049 72
E11114 71
E11115 72
E11218 330
E11231 192, 326
E11232 192, 326
E11252 327
E11311 192, 326
E11416 330
E11417 330
E11418 330
E11419 330
E11504 CRUUS 327
E11506 CRUUS 328
E11507 CRUUS 328
E11508 CRUUS 325
E11509 CRUUS 325
E11511 CRUUS 325
E11521 71
E11531 70
E11533 71
E11534 72
E11550 327
E11552 324
E11553 324
E11569 212
E11572 286
E11592 332
E11595 332
E11664 286
E11741 326
Orderno.
Approvals Cataloguepage
E11742 327
E11796 113
E11797 112
E11799 112
E11801 112
E11807 192, 326
E11816 112
E11818 112
E11872 113
E11890 113
E11898 192, 309
E11912 113
E11913 113
E11950 192, 326
E12153 96
E12163 96
E17320 118
E17327 119
E17328 119
E1D100 150, 158
E20003 134
E20004 134
E20005 135
E20051 166
E20052 166
E20053 166
E20054 166
E20055 166
E20056 166
E20057 166
E20058 166
E20059 165
E20060 165
E20061 165
E20062 165
E20104 167
E20107 167
E20128 165
E20129 165
E20130 165
E20211 167
E20230 166
E20452 135
E20453 135
E20489 166
E20493 165
E20494 166
E20590 135
E20603 162
E20606 162
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
18
Orderno.
Approvals Cataloguepage
E20612 162
E20633 163
E20639 163
E20645 163
E20679 166
E20680 166
E20711 164
E20714 163
E20715 164
E20716 137
E20718 105, 73, 96
E20719 105, 73, 96
E20720 136, 149
E20722 149, 178
E20723 136, 149
E20724 135
E20737 149
E20738 326
E20740 136, 150
E20744 135, 178
E20748 163
E20750 163
E20752 163
E20753 163
E20755 167
E20758 163
E20789 137
E20793 137
E20794 150
E20796 138
E20864 73
E20865 73
E20866 105, 73, 96
E20867 105, 73, 97
E20874 73, 97
E20877 137
E20901 314
E20907 135
E20914 135
E20938 138, 151
E20939 190, 192
E20940 138, 151
E20941 190, 309
E20948 190, 308
E20950 138
E20951 138, 151
E20952 191
E20956 134
E20964 136
E20966 136
Orderno.
Approvals Cataloguepage
E20968 136
E20969 136
E20974 136, 150
E20975 150
E20976 150
E20988 149
E20989 149
E20990 149
E20992 149
E21007 135
E21012 137
E21015 135
E21056 136
E21081 138, 151
E21083 137
E21084 137
E21085 137, 178
E21087 136, 178
E21101 163
E21102 163
E21122 137
E21133 150, 159
E21165 191, 309
E21168 191, 309
E21171 150, 159
E2D101 150, 159
E2D107 190
E2D108 190
E2D109 190
E2D110 190, 308
E2D111 150, 159
E2D112 190, 308
E2D200 190
E2I200 308
E30000 225, 263
E30003 263
E30006 225, 262
E30007 225, 263
E30016 278
E30017 278
E30018 278
E30024 278
E30046 278
E30078 262, 277
E30080 286
E30094 262, 279
E30098 286
E30101 225, 262
E30104 225, 262
E30112 192, 287
Standards and approvals /list of articles
(CCC) = CCC approval is not required
19
Orderno.
Approvals Cataloguepage
E30396 CE 262, 277
E30399 225, 263
E30400 225, 263
E30401 226, 263
E30402 226, 263
E35010 277
E35020 277
E35030 278
E35050 278
E37010 278
E37340 263
E37350 263
E37360 263
E3D103 191
E3D201 191
E40078 239
E40079 239
E40096 239, 279
E40097 239, 279
E40098 239, 279
E40099 239, 278
E40100 239, 278
E40101 239, 278
E40104 239, 278
E40107 279
E40128 239, 278
E40129 239
E40130 240
E40151 240
E40152 240
E40153 240
E40178 240
E40179 240
E40180 240
E40189 240
E40196 241
E40197 241
E40198 241
E40199 240
E40203 240
E40205 240
E40213 240
E40214 240
E40215 241
E40216 241
E40217 241
E43000 224
E43001 223
E43003 223
E43004 224
Orderno.
Approvals Cataloguepage
E43006 223
E43007 223
E43008 223
E43009 224
E43012 223
E43013 224
E43016 224
E43019 223
E43100 224
E43101 224
E43102 224
E43201 224
E43202 224
E43203 224
E43204 225
E43205 225
E43206 224
E43207 225
E43208 225
E43209 225
E43210 225
E43910 224
E60034 199
E60035 199
E60063 198
E60065 198
E60066 198
E60067 198
E60120 198
E60124 198
E7001S 297
E7003S 297
E70067 297
E70096 296
E70188 296
E70213 297
E70230 CRUUS 296
E70354 CUL 294, 296
E7040S 297
E70423 297
E80302 298, 314
E89010 206
EBC012 CUL 331
EBC019 CUL 330
EBC027 CUL 330
EBC031 CUL 330
EBC034 CUL 331
EBC035 CUL 331
EBC036 CUL 331
EC2080 192, 287
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
20
Orderno.
Approvals Cataloguepage
EVC001 CRUUS 325
EVC002 CRUUS 325
EVC003 CRUUS 325
EVC004 CRUUS 325
EVC005 CRUUS 325
EVC007 CRUUS 325
EVC008 CRUUS 325
EVC009 CRUUS 325
EVC012 CRUUS 329
EVC013 CRUUS 329
EVC016 CRUUS 329
EVC020 CRUUS 329
EVC021 CRUUS 329
EVC022 CRUUS 329
EVC023 CRUUS 329
EVC024 CRUUS 329
EVC059 CRUUS 329
EVC142 CRUUS 324
EVC143 CRUUS 324
EVC147 CRUUS 324
EVC149 CRUUS 324
EVC150 CRUUS 324
EVC151 CRUUS 324
EVC154 CRUUS 324
EVC215 328
EVC238 328
EVC240 328
EVC241 328
EVC242 329
EVC243 329
EVC302 CRUUS 328
EVC313 CRUUS 328
EVW001 CRUUS 331
EVW002 CRUUS 331
EVW003 CRUUS 331
EVW004 CRUUS 331
EVW005 CRUUS 331
EVW006 CRUUS 331
EVW007 CRUUS 332
EVW008 CRUUS 332
EVW009 CRUUS 332
EVW010 CRUUS 332
EVW011 CRUUS 332
EVW012 CRUUS 332
EVW013 CRUUS 332
EVW014 CRUUS 332
EVW015 CRUUS 332
G1501S CE, CUL 184, 212, 68
G1502S CE 184, 212, 68
G1503S CE, CUL 184, 212, 68
Orderno.
Approvals Cataloguepage
G2001S CE, CUL 184, 212
GF711S CE, CUL 67
GG505S CE, CUL 295, 67
GG507S CE, CUL 67
GG711S CE, CUL 67
GG712S CE, CUL 67
GI505S CE, CUL 296, 67
GI506S CE, CUL 67
GI701S CE, CUL 68
GI711S CCC, CE 67
GI712S CCC, CE 68
GM504S CE, CUL 295, 67
GM505S CE, CUL 295, 67
GM701S CE, CUL 68
GM705S CE, CUL 68
I7R201 CE, CUL, (CCC) 49
I7R202 CE, CUL, (CCC) 50
I7R203 CE, CUL, (CCC) 49
I7R204 CE, CUL, (CCC) 50
I7R205 CE, CUL, (CCC) 49
I7R206 CE, CUL, (CCC) 50
I7R207 CE, CUL, (CCC) 49
I7R208 CE, CUL, (CCC) 50
I7R209 CE, CUL, (CCC) 49
I7R210 CE, CUL, (CCC) 50
I7R211 CE, CUL, (CCC) 49
I7R212 CE, CUL, (CCC) 50
I7R213 CE, CUL, (CCC) 49
I7R214 CE, CUL, (CCC) 50
I7R215 CE, CUL, (CCC) 49
I7R216 CE, CUL, (CCC) 50
I85000 CE, CUL, (CCC) 50
I85001 CE, CUL, (CCC) 50
I85002 CE, CUL, (CCC) 50
I85003 CE, CUL, (CCC) 51
I85004 CE, CUL, (CCC) 51
I85005 CE, CUL, (CCC) 51
I85006 CE, CUL, (CCC) 51
I85007 CE, CUL, (CCC) 51
IA0032 CCC, CE, CUL 52
IA5082 CE, (CCC) 45
IA5122 CCC, CE, CUL 45
IB0004 CCC, CE 52
IB0016 CCC, CE, CUL 52
IB0017 CE, CCC 52
IB0026 CCC, CE 52
IB5063 CE, CUL, (CCC) 45
IB5096 CE, (CCC) 45
IC0003 CCC, CE, CUL 53
IC5005 CE, CUL, (CCC) 48
Standards and approvals /list of articles
(CCC) = CCC approval is not required
21
Orderno.
Approvals Cataloguepage
ID0013 CCC, CE, CUL 53
ID0014 CE, CCC 53
ID5005 CE, CUL, (CCC) 49
ID501A CE 70
ID5026 CE, (CCC) 49
ID5046 CE, CUL, (CCC) 49
ID5055 CE, CUL, (CCC) 48
ID5058 CE, (CCC) 48
ID5059 CE, CUL, (CCC) 66
IE5072 CE, (CCC) 39
IE5090 CE, CUL, (CCC) 40
IE5099 CE, (CCC) 40
IE5121 CE, (CCC) 39
IE5202 CE, (CCC) 40
IE5203 CE, CUL, (CCC) 41
IE5287 CE, CUL, (CCC) 40
IE5288 CE, CUL, (CCC) 41
IE5312 CE, (CCC) 41
IE5327 CE, CUL, (CCC) 41
IE5338 CE, CUL, (CCC) 40
IE5340 CE, CUL, (CCC) 40
IE5343 CE, CUL, (CCC) 40
IE5344 CE, CUL, (CCC) 40
IE5348 CE, CUL, (CCC) 39
IE5351 CE, CUL, (CCC) 40
IE5352 CE, CUL, (CCC) 40
IE5366 CE, CUL, (CCC) 40
IE5368 CE, CUL, (CCC) 39
IE5381 CE, (CCC) 55
IE9203 CCC, CE 61
IE9902 CCC, CE 61
IE9940 CE, (CCC) 61
IEC200 CE, CUL, (CCC) 58
IEC201 CE, CUL, (CCC) 58
IER200 CE, CUL, (CCC) 63
IER203 CE, (CCC) 63
IER204 CE, (CCC) 64
IER205 CE, (CCC) 64
IER206 CE, (CCC) 63
IF0001 CCC, CE 51
IF0003 CE, CCC 51
IF5188 CE, (CCC) 41
IF5249 CE, (CCC) 41
IF5297 CE, (CCC) 41
IF5313 CE, CCC 41
IF5329 CE, (CCC) 41
IF5345 CE, (CCC) 41
IF5597 CE, CCC 42
IF5598 CCC, CE, CUL 42
IF5645 CCC, CE 42
Orderno.
Approvals Cataloguepage
IF5646 CCC, CE 42
IF5647 CCC, CE, CUL 42
IF5750 CE, CUL, (CCC) 66
IF5751 CE, CUL, (CCC) 66
IF5815 CE, (CCC) 55
IF5853 CE, (CCC) 37
IF5934 CE, CUL, (CCC) 56
IF5935 CE, CUL, (CCC) 56
IF6030 CE, (CCC) 43
IF6031 CE, (CCC) 44
IF9222 CCC, CE 61
IF9920 CCC, CE 61
IF9924 CCC, CE 61
IFC200 CE, CUL, (CCC) 56
IFC201 CE, CUL, (CCC) 56
IFC204 CE, CUL, (CCC) 55
IFC205 CE, CUL, (CCC) 56
IFC206 CE, CUL, (CCC) 55, 60
IFC207 CE, CUL, (CCC) 56
IFC210 CE, CUL, (CCC) 56, 60
IFC211 CE, CUL, (CCC) 59
IFC234 CE, (CCC) 56
IFC235 CE, (CCC) 56
IFC258 CE, CUL 58
IFC263 CE, CUL 59
IFC264 CE, CUL 59
IFM207 CE, CUL, E1, (CCC) 66
IFM208 CE, CUL, E1, (CCC) 66
IFR200 CE, CUL, (CCC) 63
IFR203 CE, CUL, (CCC) 63
IFR204 CE, CUL, (CCC) 64
IFR205 CE, CUL, (CCC) 64
IFR206 CE, CUL, (CCC) 63
IFS200 CE, CUL, (CCC) 37
IFS201 CE, CUL, (CCC) 37
IFS204 CE, CUL, (CCC) 37
IFS205 CE, CUL, (CCC) 37
IFS206 CE, CUL, (CCC) 37
IFS207 CE, CUL, (CCC) 37
IFS208 CE, CUL, (CCC) 37
IFS209 CE, CUL, (CCC) 37
IFS210 CE, CUL, (CCC) 37
IFS214 CE, CUL, (CCC) 41
IFS216 CE, CUL, (CCC) 41
IFT201 CE, CUL, (CCC) 53
IFT203 CE, CUL, (CCC) 53
IFT216 CE, CUL, (CCC) 53
IFT240 CE, CUL, (CCC) 55
IFW200 CE, CUL, (CCC) 64
IFW201 CE, CUL, (CCC) 64
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
22
Orderno.
Approvals Cataloguepage
IG0005 CE, CUL, CCC 51
IG0006 CE, CUL, CCC 51
IG0011 CCC, CE, CUL 51
IG0402 CCC, CE, CUL 38
IG5221 CE, (CCC) 42
IG5397 CE, (CCC) 42
IG5398 CE, (CCC) 42
IG5399 CE, (CCC) 42
IG5401 CE, (CCC) 42
IG5533 CCC, CE 42
IG5594 CCC, CE 42
IG5595 CCC, CE, CUL 43
IG5597 CCC, CE 43
IG5647 CE, CUL, (CCC) 66
IG5667 CE, CUL, (CCC) 66
IG5682 CCC, CE 61
IG5718 CCC, CE 43
IG5846 CE, (CCC) 55
IG5951 CE, CUL, (CCC) 57
IG5952 CE, CUL, (CCC) 57
IG5953 CE, (CCC) 38
IG5954 CE, (CCC) 38
IG6083 CE, (CCC) 44
IG6084 CE, (CCC) 44
IG9983 CCC, CE 62
IG9984 CCC, CE 61
IGC200 CE, CUL, (CCC) 57
IGC204 CE, CUL, (CCC) 57
IGC205 CE, CUL, (CCC) 57
IGC206 CE, CUL, (CCC) 57
IGC207 CE, CUL, (CCC) 57
IGC210 CE, CUL, (CCC) 57, 60
IGC211 CE, CUL, (CCC) 59
IGC215 CE, CUL, (CCC) 60
IGC220 CE, CUL, (CCC) 57
IGC222 CE, (CCC) 57
IGC223 CE, (CCC) 57
IGC226 CE, CUL, (CCC) 61
IGC232 CE, CUL, (CCC) 60
IGC248 CE, CUL 59
IGC249 CE, CUL 59
IGC250 CE, CUL 59
IGR200 CE, CUL, (CCC) 63
IGR203 CE, CUL, (CCC) 63
IGR204 CE, CUL, (CCC) 64
IGR205 CE, CUL, (CCC) 64
IGR206 CE, CUL, (CCC) 63
IGS200 CE, CUL, (CCC) 38
IGS201 CE, CUL, (CCC) 38
IGS204 CE, CUL, (CCC) 37
Orderno.
Approvals Cataloguepage
IGS205 CE, CUL, (CCC) 38
IGS206 CE, CUL, (CCC) 38
IGS207 CE, CUL, (CCC) 38
IGS208 CE, CUL, (CCC) 38
IGS209 CE, CUL, (CCC) 38
IGS212 CE, CUL, (CCC) 38
IGS216 CE, CUL, (CCC) 42
IGT200 CE, CUL, (CCC) 54
IGT201 CE, CUL, (CCC) 54
IGT202 CE, CUL, (CCC) 54
IGT203 CE, CUL, (CCC) 54
IGT205 CE, CUL, (CCC) 54
IGT206 CE, CUL, (CCC) 54
IGT20A CE 70
IGT212 CE, CUL, (CCC) 54
IGT247 CE, CUL, (CCC) 55
IGW200 CE, CUL, (CCC) 65
IGW201 CE, CUL, (CCC) 65
II0005 CE, CCC 52
II0006 CE, CCC 52
II0011 CE, CUL, CCC 52
II0012 CE, CUL, CCC 52
II0366 CCC, CE, CUL 43
II5300 CE, (CCC) 43
II5369 CE, (CCC) 43
II5490 CE, CCC 43
II5492 CE, CCC 43
II5503 CE, CUL, (CCC) 66
II5811 CE, (CCC) 38
II5858 CE, CUL, (CCC) 58
II5859 CE, CUL, (CCC) 58
II5913 CE, (CCC) 44
II5914 CE, (CCC) 44
IIC200 CE, CUL, (CCC) 58
IIC201 CE, CUL, (CCC) 58
IIC208 CE, (CCC) 58
IIC218 CE, CUL, (CCC) 60
IIC219 CE, CUL, (CCC) 60
IIC224 CE, CUL 59
IIR200 CE, CUL, (CCC) 63
IIR203 CE, CUL, (CCC) 63
IIR204 CE, CUL, (CCC) 64
IIR205 CE, CUL, (CCC) 64
IIR206 CE, CUL, (CCC) 63
IIS204 CE, CUL, (CCC) 39
IIS206 CE, CUL, (CCC) 39
IIS208 CE, CUL, (CCC) 39
IIT205 CE, CUL, (CCC) 54
IIT228 CE, CUL, (CCC) 55
IIW200 CE, CUL, (CCC) 65
Standards and approvals /list of articles
(CCC) = CCC approval is not required
23
Orderno.
Approvals Cataloguepage
IIW201 CE, CUL, (CCC) 65
IL5002 CE, CUL, (CCC) 45
IL5004 CE, CUL, (CCC) 46
IL5022 CE, CUL, (CCC) 45
IM0010 CCC, CE, CUL 52
IM0011 CCC, CE, CUL 52
IM0049 CCC, CE 53
IM0054 CCC, CE 53
IM5020 CE, CUL, (CCC) 48
IM5037 CCC, CE 48
IM5038 CCC, CE 48
IM5115 CE, CUL, (CCC) 47
IM5116 CE, CUL, (CCC) 47
IM5117 CE, CUL, (CCC) 47
IM5119 CE, CUL, (CCC) 47, 65
IM5120 CE, CUL, (CCC) 47, 65
IM5123 CE, CUL, (CCC) 47
IM5124 CE, CUL, (CCC) 47, 65
IM5125 CE, CUL, (CCC) 48, 65
IM5126 CE, CUL, (CCC) 48, 65
IM5127 CE, (CCC) 62
IM5128 CE, CUL, (CCC) 47
IM5129 CE, CUL, (CCC) 47, 65
IM5130 CE, CUL, (CCC) 47
IM5132 CE, CUL, (CCC) 47, 65
IM5133 CE, CUL, (CCC) 47, 65
IM5134 CE, CUL, (CCC) 47
IM5136 CE, CUL, (CCC) 48
IM5137 CE, (CCC) 62
IM5138 CE, (CCC) 62
IN0073 CCC, CE 52
IN0081 CCC, CE 52
IN0108 CE, CUL 118
IN5129 CE, (CCC) 46
IN5212 CE, CUL, (CCC) 46
IN5224 CE, (CCC) 118
IN5225 CE, CUL, (CCC) 118
IN5230 CE, CUL, (CCC) 46
IN5334 CE, CUL, (CCC) 118
IO5016 CE, (CCC) 62
IO5017 CE, (CCC) 62
IO5018 CE, (CCC) 62
IS5001 CE, CUL, (CCC) 46
IS5026 CE, CUL, (CCC) 46
IS5035 CE, CUL, (CCC) 46
IS5071 CE, CUL, (CCC) 46
IT5034 CE, CUL, (CCC) 45
IT5040 CE, CUL, (CCC) 45
IV5003 CE 48
IW5051 CE, (CCC) 46
Orderno.
Approvals Cataloguepage
IW5058 CE, (CCC) 46
IW5064 CE, CUL, (CCC) 46
IY5029 CE, (CCC) 39
IY5036 CE, CUL, (CCC) 39
IY5049 CE, CUL, (CCC) 39
IZ5026 CE, CUL, (CCC) 44
IZ5035 CE, CUL, (CCC) 44
IZ5046 CE, CUL, (CCC) 45
IZ5047 CE, CUL, (CCC) 44
JAC201 CE, (CCC) 176
KB0025 CCC, CE, CUL 94
KB0029 CCC, CE, CUL 94
KB5004 CE, CUL, (CCC) 93
KB5062 CE, (CCC) 93
KD0009 CCC, CE 94
KD0012 CCC, CE 94
KD5018 CE, (CCC) 93
KD5022 CE, (CCC) 93
KF5001 CE, CUL 92
KF5002 CE, CUL 92
KG5040 CCC, CE 92
KG5041 CE 92
KG5043 CE, (CCC) 92
KG5047 CCC, CE 92
KG5057 CE, (CCC) 92
KI0016 CCC, CE, CUL 93
KI0020 CCC, CE, CUL 93
KI0024 CCC, CE, CUL 94
KI0040 CCC, CE 94
KI5001 CE, CUL, (CCC) 92
KI5002 CE, CUL, (CCC) 92
KI5023 CCC, CE, CUL 93
KI5030 CCSAUS, CE, FM, IEC 95
KI5038 CE, (CCC) 92
KI5065 CE 95
KI5085 CE, CUL 93
KI5087 CE, CUL 93
KQ6005 CE, CUL 94
KX5001 CCSAUS, CE, FM 95
LI2141 CE, CUL 222
LI2142 CE, CUL 222
LI2143 CE, CUL 223
LI5141 CE, CUL 223
LI5142 CE, CUL 223
LI5143 CE, CUL 223
LI5144 CE, CUL 223
LK1022 CE, CUL 220
LK1023 CE, CUL 220
LK1024 CE, CUL 220
LK1222 CE 220
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
24
Orderno.
Approvals Cataloguepage
LK1223 CE 220
LK1224 CE 220
LK3122 CE, CUL 220
LK3123 CE, CUL 220
LK3124 CE, CUL 220
LK8122 CE, CUL 220
LK8123 CE, CUL 220
LK8124 CE, CUL 221
LL8022 CE, CUL 222
LL8023 CE, CUL 222
LL8024 CE, CUL 222
LR3000 CE, CUL 221
LR3300 CE, CUL 221
LR7000 CE, CUL 221
LR7300 CE, CUL 221
LR8000 CE, CUL 221
LR8300 CE, CUL 221
LT8022 CE, CUL 221
LT8023 CE, CUL 221
LT8024 CE, CUL 222
ME5010 CE, CUL, (CCC) 104
MFS200 CE, CUL, (CCC) 104
MFS202 CE, CUL, (CCC) 104
MFS203 CE, CUL 104
MGS200 CE, CUL, (CCC) 104
MGT200 CE, CUL, (CCC) 104
MGT201 CE, (CCC) 104
MK5100 CE, CUL, (CCC) 110
MK5101 CE, CUL, (CCC) 110
MK5102 CE, CUL, (CCC) 110
MK5107 CE, CUL, (CCC) 110
MK5108 CE, CUL, (CCC) 110
MK5111 CE, CUL, (CCC) 111
MK5112 CE, CUL, (CCC) 110
MK5115 CE, CUL, (CCC) 110
MK5117 CE, CUL, (CCC) 110
MK5301 CE, CUL, (CCC) 111
MK5302 CE, CUL, (CCC) 111
MK5304 CE, CUL, (CCC) 111
MK5310 CE, CUL, (CCC) 112
MK5311 CE, CUL, (CCC) 112
MK5312 CE, CUL, (CCC) 112
MK5314 CE, CUL, (CCC) 112
MR0100 CE, UL 110
MR0101 CE, UL 111
MR0107 CE, UL 111
MS5010 CE, CUL, (CCC) 104
N0031A CE 216, 70, 95
NE5001 CCSAUS, CE, FM 69
NF5002 CCSAUS, CE, FM, IEC 69
Orderno.
Approvals Cataloguepage
NF5004 CCSAUS, CE, FM 69
NG5002 CCSAUS, CE, FM, IEC 69
NG5004 CCSAUS, CE, FM 69
NI5002 CCSAUS, CE, FM, IEC 69
NM501A CCSAUS, CE, FM 69
NN5013 CE 118
O1D100 CE, CUL, (CCC) 158
O1D101 CE, CUL, (CCC) 148
O1D103 CE, CUL, (CCC) 158
O1D104 CE, CUL, (CCC) 148
O1D105 CE, CUL, (CCC) 158
O1D106 CE, CUL, (CCC) 158
O1D155 CE, CUL, (CCC) 158
O1D300 CE, CUL, (CCC) 158
O2D220 CE, CUL 188
O2D222 CE, CUL 188
O2D224 CE, CUL 188
O2D225 CE, CUL 188
O2D227 CE, CUL 188
O2D229 CE, CUL 188
O2D900 CE, CUL 189
O2D901 CE, CUL 189
O2D902 CE, CUL 189
O2D903 CE, CUL 189
O2D904 CE, CUL 189
O2D905 CE, CUL 189
O2D906 CE 189
O2D907 CE 189
O2D908 CE 189
O2D909 CE, (CCC) 188, 308
O2D910 CE 189
O2D911 CE 189
O2D912 CE 189
O2I100 CE, CUL 308
O2I102 CE, CUL 308
O2I104 CE, CUL 308
O3D200 CE 191
O3D201 CE 191
O4P200 CE, CUL, (CCC) 134
O4P201 CE, CUL, (CCC) 134
O5E200 CE, CUL, (CCC) 133
O5E500 CE, CUL, (CCC) 134
O5E700 CE, CUL, (CCC) 148
O5H200 CE, CUL, (CCC) 133
O5H500 CE, CUL, (CCC) 134
O5H501 CE, CUL, (CCC) 134
O5H700 CE, CUL, (CCC) 149
O5P200 CE, CUL, (CCC) 133
O5P201 CE, CUL, (CCC) 133
O5P500 CE, CUL, (CCC) 134
Standards and approvals /list of articles
(CCC) = CCC approval is not required
25
Orderno.
Approvals Cataloguepage
O5P700 CE, CUL, (CCC) 149
O5S200 CE, CUL, (CCC) 133
O5S500 CE, CUL, (CCC) 133
O5S700 CE, CUL, (CCC) 148
O7E200 CE, UL 130
O7E201 CE, UL 130
O7H200 CE, UL 131
O7H202 CE, UL 131
O7H204 CE, UL 131
O7P200 CE, UL 130
O7P201 CE, UL 131
O7S200 CE, UL 130
OBF500 CE, CUL, (CCC) 162
OD5005 CE, (CCC) 176
OD5007 CE, (CCC) 176
OD5011 CE, (CCC) 176
OF5012 CE, CUL, (CCC) 126
OF5021 CE, CUL, (CCC) 126
OF5022 CE, CUL, (CCC) 126
OF5024 CE, CUL, (CCC) 126
OF5025 CE, CUL, (CCC) 126
OF5027 CE, CUL, (CCC) 126
OG0034 CCC, CE 127
OG5123 CE, CUL, (CCC) 128
OG5124 CE, CUL, (CCC) 128
OG5125 CE, CUL, (CCC) 128
OG5126 CE, CUL, (CCC) 128
OG5127 CE, CUL, (CCC) 128
OG5128 CE, CUL, (CCC) 128
OG5129 CE, CUL, (CCC) 128
OGE200 CE, CUL, (CCC) 126
OGE201 CE, CUL, (CCC) 126
OGE500 CE, CUL, (CCC) 127
OGE700 CE, CUL, (CCC) 146
OGE701 CE, (CCC) 146
OGH200 CE, CUL, (CCC) 127
OGH280 CE, CUL, (CCC) 129
OGH281 CE, CUL, (CCC) 129
OGH282 CE, CUL, (CCC) 129
OGH283 CE, CUL, (CCC) 129
OGH500 CE, CUL, (CCC) 127
OGH502 CE, CUL, (CCC) 128
OGH504 CE, CUL, (CCC) 128
OGH580 CE, CUL, (CCC) 129
OGH581 CE, CUL, (CCC) 129
OGH700 CE, CUL, (CCC) 146
OGP200 CE, CUL, (CCC) 126
OGP201 CE, (CCC) 127
OGP280 CE, CUL, (CCC) 129
OGP281 CE, CUL, (CCC) 129
Orderno.
Approvals Cataloguepage
OGP282 CE, CUL, (CCC) 129
OGP283 CE, CUL, (CCC) 129
OGP300 CE, CUL, (CCC) 129
OGP301 CE, CUL, (CCC) 129
OGP500 CE, CUL, (CCC) 127
OGP700 CE, CUL, (CCC) 146
OGP701 CE, CUL, (CCC) 146
OGS200 CE, CUL, (CCC) 126
OGS500 CE, CUL, (CCC) 127
OGS700 CE, CUL, (CCC) 146
OGS701 CE, CUL, (CCC) 146
OGT200 CE, CUL, (CCC) 127
OH5004 CE, (CCC) 130
OH5005 CE, (CCC) 130
OH5006 CE, (CCC) 130
OH5007 CE, (CCC) 130
OH5008 CE, (CCC) 130
OH5011 CE, (CCC) 130
OJ5004 CE, CUL, (CCC) 132
OJ5014 CE, CUL, (CCC) 148
OJ5016 CE, CUL, (CCC) 148
OJ5017 CE, CUL, (CCC) 148
OJ5019 CE, CUL, (CCC) 147
OJ5020 CE, CUL, (CCC) 147
OJ5022 CE, CUL, (CCC) 132
OJ5023 CE, CUL, (CCC) 132
OJ5026 CE, CUL, (CCC) 131
OJ5027 CE, CUL, (CCC) 131
OJ5030 CE, CUL, (CCC) 131
OJ5031 CE, CUL, (CCC) 131
OJ5032 CE, CUL, (CCC) 131
OJ5036 CE, CUL, (CCC) 147
OJ5038 CE, CUL, (CCC) 146
OJ5039 CE, CUL, (CCC) 146
OJ5041 CE, CUL, (CCC) 146
OJ5042 CE, CUL, (CCC) 146
OJ5044 CE, CUL, (CCC) 133
OJ5048 CE, CUL, (CCC) 132
OJ5052 CE, CUL, (CCC) 148
OJ5054 CE, CUL, (CCC) 147
OJ5056 CE, CUL, (CCC) 148
OJ5058 CE, CUL, (CCC) 147
OJ5061 CE, CUL, (CCC) 132
OJ5070 CE, CUL, (CCC) 133
OJ5071 CE, CUL, (CCC) 132
OJ5078 CE, CUL, (CCC) 132
OJ5086 CE, CUL, (CCC) 176
OJ5104 CE, CUL, (CCC) 132
OJ5108 CE, CUL, (CCC) 132
OJ5109 CE, CUL, (CCC) 132
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
26
Orderno.
Approvals Cataloguepage
OJ5126 CE, CUL, (CCC) 131
OJ5130 CE, CUL, (CCC) 131
OJ5131 CE, CUL, (CCC) 131
OJ5136 CE, CUL, (CCC) 147
OJ5138 CE, CUL, (CCC) 147
OJ5139 CE, CUL, (CCC) 147
OJ5141 CE, CUL, (CCC) 147
OJ5142 CE, CUL, (CCC) 147
OJ5144 CE, CUL, (CCC) 133
OJ5148 CE, CUL, (CCC) 132
OJ5154 CE, CUL, (CCC) 147
OJ5158 CE, CUL, (CCC) 147
OK5001 CCC, CE, CUL 164
OK5008 CCC, CE, CUL 164
OO5000 CE, CUL, (CCC) 162
OO5001 CE, CUL, (CCC) 162
OO5002 CE, CUL, (CCC) 162
OO5003 CE, CUL, (CCC) 162
OO5005 CE, CUL, (CCC) 164
OPL200 CE, CUL, (CCC) 177
OPL201 CE, CUL, (CCC) 177
OPL202 CE, CUL, (CCC) 178
OPL203 CE, CUL, (CCC) 178
OPU200 CE, (CCC) 176
OPU201 CE, CUL, (CCC) 177
OPU203 CE, CUL, (CCC) 177
OPU204 CE, CUL, (CCC) 177
OPU205 CE, CUL, (CCC) 177
OPU207 CE, (CCC) 177
OPU208 CE, CUL, (CCC) 177
OPU209 CE, CUL, (CCC) 177
OPU210 CE, CUL, (CCC) 177
OPU211 CE, CUL, (CCC) 177
OU5001 CCC, CE, CUL 164
OU5002 CCC, CE, CUL 164
OU5043 CCC, CE, CUL 165
OU5044 CCC, CE, CUL 165
OY001S CE, CUL, (CCC) 184
OY002S CE, CUL, (CCC) 184
OY003S CE, CUL, (CCC) 184
OY004S CE, CUL, (CCC) 184
OY005S CE, CUL, (CCC) 184
OY006S CE, CUL, (CCC) 184
OY007S CE, CUL, (CCC) 184
OY008S CE, CUL, (CCC) 184
OY009S CE, CUL, (CCC) 184
PA3020 CE, CUL 258
PA3021 CE, CUL 258
PA3022 CE, CUL 258
PA3023 CE, CUL 258
Orderno.
Approvals Cataloguepage
PA3024 CE, CUL 258
PA3026 CE, CUL 258
PA3027 CE, CUL 258
PA3029 CE, CUL 258
PA3060 CE 258
PA9020 CE 258
PA9021 CE 258
PA9022 CE, CUL 258
PA9023 CE, CUL 258
PA9024 CE, CUL 258
PA9026 CE, CUL 259
PA9027 CE, CUL 259
PA9028 CE, CUL 259
PA9029 CE, CUL 259
PA9060 CE 258
PE7003 CE, CUL 262
PE7004 CE, CUL 262
PF2609 CE, CUL, EHEDG, FDA 261
PF2652 CE, CUL, EHEDG, FDA 261
PF2653 CE, CUL, EHEDG, FDA 261
PF2654 CE, CUL, EHEDG, FDA 261
PF2656 CE, CUL, EHEDG, FDA 261
PF2657 CE, CUL, EHEDG, FDA 261
PF2658 CE, CUL, EHEDG, FDA 261
PG2793 CE, CUL, EHEDG, FDA 261
PG2794 CE, CUL, EHEDG, FDA 261
PG2795 CE, CUL, EHEDG, FDA 261
PI2995 CE, CUL, FDA 260
PK5520 CE, CUL 253
PK5521 CE, CUL 253
PK5522 CE, CUL 254
PK5523 CE, CUL 254
PK5524 CE, CUL 254
PK6520 CE, CUL 254
PK6521 CE, CUL 254
PK6522 CE, CUL 254
PK6523 CE, CUL 254
PK6524 CE, CUL 254
PK6730 CE, CUL 254
PK6731 CE, CUL 254
PK6732 CE, CUL 255
PK6734 CE, CUL 255
PK7520 CE, CUL 254
PK7521 CE, CUL 254
PK7522 CE, CUL 254
PK7524 CE, CUL 254
PK8730 CE, CUL 255
PK8731 CE, CUL 255
PK8732 CE, CUL 255
PK8734 CE, CUL 255
Standards and approvals /list of articles
(CCC) = CCC approval is not required
27
Orderno.
Approvals Cataloguepage
PN009A CE 260
PN2009 CE, CUL 250
PN2020 CE, CUL 250
PN2021 CE, CUL 250
PN2022 CE, CUL 250
PN2023 CE, CUL 250
PN2024 CE, CUL 250
PN2026 CE, CUL 250
PN2027 CE, CUL 250
PN2028 CE, CUL 250
PN2220 CE, CUL 250
PN2221 CE, CUL 250
PN2222 CE, CUL 250
PN2223 CE, CUL 250
PN2224 CE, CUL 250
PN2226 CE, CUL 250
PN2227 CE, CUL 251
PN2228 CE, CUL 251
PN3000 CE, CUL 251
PN3001 CE, CUL 251
PN3002 CE, CUL 251
PN3003 CE, CUL 251
PN3004 CE, CUL 251
PN3006 CE, CUL 251
PN3007 CE, CUL 251
PN3029 CE, CUL 251
PN3060 CE 251
PN5000 CE, CUL 251
PN5001 CE, CUL 251
PN5002 CE, CUL 252
PN5003 CE, CUL 252
PN5004 CE, CUL 252
PN5006 CE, CUL 252
PN5007 CE, CUL 252
PN7000 CE, CUL 252
PN7001 CE, CUL 252
PN7002 CE, CUL 252
PN7003 CE, CUL 252
PN7004 CE, CUL 252
PN7006 CE, CUL 252
PN7007 CE, CUL 252
PN7009 CE, CUL 252
PN7060 CE 252
PN7200 CE, CUL 252
PN7201 CE, CUL 252
PN7202 CE, CUL 253
PN7203 CE, CUL 253
PN7204 CE, CUL 253
PN7206 CE, CUL 253
PN7207 CE, CUL 253
Orderno.
Approvals Cataloguepage
PN7809 CE, CUL 260
PN7834 CE, CUL 260
PNI021 CE 259
PNI022 CE 259
PNI023 CE 260
PNI024 CE 260
PP0520 CE 256
PP0521 CE 256
PP0522 CE, CUL 256
PP0523 CE, CUL 257
PP0524 CE, CUL 257
PP2001 CE, CUL 262
PP7550 CE 256
PP7551 CE 256
PP7552 CE, CUL 256
PP7553 CE, CUL 256
PP7554 CE, CUL 256
PP7556 CE, CUL 256
PQ7809 CE, CUL 260
PQ7834 CE, CUL 260
PS3208 CE 222, 259
PS3407 CE 222, 259
PS7570 CE 259
PT3540 CE, CUL 255
PT3541 CE, CUL 255
PT3542 CE, CUL 255
PT3543 CE, CUL 255
PT3544 CE, CUL 255
PT3550 CE, CUL 257
PT3551 CE, CUL 257
PT3552 CE, CUL 257
PT3553 CE, CUL 257
PT3554 CE, CUL 257
PT9540 CE, CUL 255
PT9541 CE, CUL 256
PT9542 CE, CUL 256
PT9543 CE, CUL 256
PT9544 CE, CUL 256
PT9550 CE, CUL 257
PT9551 CE, CUL 257
PT9552 CE, CUL 257
PT9553 CE, CUL 257
PT9554 CE, CUL 257
PY7000 CE 253
PY7001 CE 253
PY7002 CE 253
PY7003 CE 253
RU1024 CE, C_NRTL_US 198
RV1033 CE, C_NRTL_US 198
RV6016 CE, C_NRTL_US 198
Standards and approvals /list of articles
Product selectors and further information can be found at: www.ifm.com
28
Orderno.
Approvals Cataloguepage
SBY323 CE 234
SBY332 CE, CUL 234
SBY333 CE, CUL 234
SBY334 CE, CUL 234
SBY346 CE, CUL 234
SBY357 CE, CUL 234
SD2000 CE, CUL 237
SD5000 CE, CUL 237
SD5100 CE, CUL 238
SD6000 CE, CUL 237
SD6100 CE, CUL 238
SD8000 CE, CUL 237
SD9000 CE, CUL 237
SF121A 236
SF311A TIIS 236
SF320A IEC 236
SF5200 CUL 235
SF5201 CUL 235
SF5300 CUL 235
SF5350 CUL 235
SF5700 CUL 235
SF6200 CUL 235
SI5000 CE, CUL 233
SI5001 CE, CUL 233
SI5002 CE, CUL 233
SI5003 CE, CUL 233
SI5004 CE, CUL 233
SI5007 CE, CUL 234
SI500A CE 234
SI5010 CE, CUL 233
SI5011 CE, CUL 233
SI5100 CE 233
SL5101 CE 237
SM6000 CE, CUL 232
SM6004 CE, CUL 232
SM6050 CE, CUL 232
SM7000 CE, CUL 232
SM7004 CE, CUL 232
SM7050 CE, CUL 232
SM8000 CE, CUL 232
SM8004 CE, CUL 232
SM8050 CE, CUL 232
SN0150 CE, CUL 235
SN0151 CE, CUL 236
SN2301 CE, IEC 237
SQ0500 CE, CUL 238
SR0150 CE, CUL 236
SR2301 CE, IEC 237
SR5900 CE, CUL 236
SU7000 CE, CUL 238
Orderno.
Approvals Cataloguepage
SU7200 CE, CUL 238
SU8000 CE, CUL 238
SU8200 CE, CUL 238
SU9000 CE, CUL 238
SU9004 CE, CUL 239
TA3130 CE, CUL 276
TA3131 CE, CUL 276
TA3171 CE, CUL 276
TA3231 CE, CUL 277
TA3237 CE, CUL 277
TA3333 CE, CUL 276
TA3337 CE, CUL 276
TA3430 CE, CUL, EHEDG 277
TK6130 CE, CUL 272
TK6330 CE, CUL 272
TK7130 CE, CUL 272
TK7330 CE, CUL 272
TK7480 CE, CUL 272
TN2531 CE, CUL 272
TN7531 CE, CUL 272
TP3231 CE, CUL 273
TP3232 CE, CUL 273
TP3233 CE, CUL 273
TP3237 CE, CUL 273
TR2432 CE, CUL 273
TR7432 CE, CUL 273
TR8430 CE, CUL 272
TS0759 275
TS2051 CUL 275, 276
TS2056 275, 276
TS2151 275
TS2229 276
TS2251 275
TS2256 275
TS2659 275
TS2759 275
TS4759 275
TS5051 CUL 275, 276
TS5151 275
TS9281 275
TT1050 CUL 274
TT1081 CUL 274
TT1150 CUL 273
TT1181 CUL 274
TT1250 CUL 273
TT2050 CUL 274
TT2081 CUL 274
TT2181 CUL 274
TT3050 CUL 274
TT3081 CUL 274
Standards and approvals /list of articles
(CCC) = CCC approval is not required
29
Orderno.
Approvals Cataloguepage
TT3150 CUL 273
TT3181 CUL 274
TT5050 CUL 274
TT5081 CUL 274
VB1001 CE, CUL 286
VE1001 CE, CUL 286
VE1101 CE, CUL 286
VE1103 CE, CUL 286
VES001 286
VES003 287
VKV021 CE, CUL 287
VSA001 CE, CUL 288
VSA002 CE, CUL 288
VSA003 CE, CUL 288
VSE002 CE, CUL 287
VSE100 CE, CUL 287
Sensors for specificapplications
Product selectors and further information can be found at: www.ifm.com
30
Sensors for specificapplications
Product selectors and further information can be found at: www.ifm.com
31
Selection chart Page
AS-i sensors 32
Sensors for hazardous areas (ATEX) 32
Sensors with IO-Link 33
Sensors for safety technology 33
Sensors for specificapplications
Product selectors and further information can be found at: www.ifm.com
32
AS-Interface
AS-interface (actuator sensor interface)is a worldwide manufacturer-indepen-dent standard for the connection ofactuators and sensors of the first fieldlevel. Data and power supply are jointlytransmitted via a two-wire cable. Wiringcomplexity, documentation and set-uptimes are reduced.
AS-i sensors Page
AS-i sensors 296
ATEX
ATEX (Atmosphère explosible) is a briefdescription of the uniform EU directives94/9/EC (for manufactures of units for hazardous areas) and 1999/92/EC(for operators of plants for hazardousareas) governing the safety require-ments for explosion-hazardous areas.Since 30 June 2003, units for hazardousareas have to be approved to 94/9/EU regulations. For further informationabout international directives see the“Approvals” chapter.
Sensors for hazardous areas (ATEX) Page
Inductive sensors 69 - 70
Capacitive sensors 95
Valve sensors 118
Flow sensors 234 - 234236 - 236
Pressure sensors 260
Diagnostic systems 286
Sensors for specificapplications
Product selectors and further information can be found at: www.ifm.com
33
IO-Link
IO-Link is a field-bus independent andopen point-to-point communicationinterface. It is a low-cost possibility totransmit parameter, diagnosis and process data from a sensor or an actuator via an I/O module.
Sensors with IO-Link Page
Pressure sensors 256 - 257
Temperature sensors 272 - 273
Safety
The EC Machinery Directive stipulatesmachinery should not present a risk. Ifsafety is dependent on control systems,these must be designed so as to minimise malfunction. The IEC 62061und ISO 13849-1 standards apply. Classification is made either in the Safety Integrity Level (SIL 1-3 in IEC 62061) or in the Performance Level(PL a-e in ISO 13849-1).
Sensors for safety technology Page
Inductive sensors 67 - 68
Safety light curtains 184
Sensors for almost all application areas.
Wide choice of housing styles andoperating voltages.
High-quality housing materials.
Cylindrical housings: Ø 3…34 mm, rectan-gular housings: 5 x 5 x 24 to 105 x 80 x 40.
Extensive range of fixing accessoriesand connection technology.
Inductive sensors
In all automated processes sensors are absolutely necessary to provide the PLC withinformation. They supply the necessary signals on positions, limits or serve as pulsepick-ups for counting tasks or for monitoring rotational speed. Inductive andcapacitive sensors are nowadays indispensable for industrial usage. As compared tomechanical switches they offer ideal conditions: non-contact operation free fromany wear and tear, high switching frequencies and accuracy. In addition, they areinsensitive to vibration, dust and moisture. Inductive sensors detect all metalswithout contact.
Operating principle of inductive sensors
Inductive sensors take advantage of the physical effect of the change in the qualityfactor in a resonant circuit caused by eddy current losses in conductive materials.This is how it works: An LC tuned circuit generates a high frequency electromag-netic field. This field is radiated from the active face of the sensor. If a conductivematerial enters this field, eddy currents will be formed in accordance with the lawof inductance which draw energy from the oscillator. This reduces the oscillationamplitude. The change is converted into a switching signal. The operating principlepermits detection of all metals irrespective of whether they are moving or not.
Application sensors
Every application has its own requirements as regards the sensors to be used.Temperature shocks, mechanical influences or aggressive cleaning agents are just afew of the possible environmental influences to which sensors are subjected. ifmelectronic therefore offers inductive sensors which have been developed for specialapplications. This includes for example the use of selected housing materials suchas stainless steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealingconcept from the sensor to the connector ensures ideal protection against ingressof moisture and aggressive media.
Typical application:Positioning sensing inautomation technol-ogy; inductive sensorsoperate reliably andwithout wear.
High frequencyelectromagnetic field:The inductive sensor
detects all metals.
Inductive sensors
34
Inductive sensors
35
Selection chart Page
Sensors with increased sensing range for industrial applications 37 - 39
Sensors for industrial applications, threaded housings 39 - 43
Sensors with analogue output 4...20 mA for industrial applications 43 - 44
Sensors with analogue output 0...10 V for industrial applications 44
Sensors with smooth sleeve for industrial applications 44 - 45
Sensors for industrial applications, rectangular housings 45 - 49
Ring sensors for industrial applications 49 - 50
Tube sensors for industrial applications 50 - 51
Sensors for industrial applications, AC and AC/DC 51 - 53
Sensors for hygienic and wet areas with increased sensing range 53 - 54
Full-metal sensors for hygienic and wet areas 55
Sensors for hygienic and wet areas 55
Sensors for oils and coolants with increased sensing range 55 - 58
Full-metal sensors for oils and coolants 58 - 59
Full metal sensors for oils and coolants with correction factor K = 0 59 - 60
Sensors for oils and coolants with correction factor K = 1 60
Sensors for oils and coolants with ceramic sensing face 60
Sensors for oils and coolants, threaded housings 61 - 62
Sensors for oils and coolants, rectangular housings 62
Full-metal sensors with non-stick coating against weld spatter 63 - 64
Electromagnetic field immune sensors with correction factor K = 1 64 - 65
Electromagnetic field immune sensors 66
Sensors for mobile applications 66
Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e 67
Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d 67 - 68
Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e 68
Safety relays with relay outputs for fail-safe sensors 68
Safety relays with solid state outputs for fail-safe sensors 68
Sensors with ATEX approval 1D / 2G 69
Sensors with ATEX approval 1D / 1G / 2G 69
Sensors with ATEX approval 2D 70
Selection chart Page
Sensors with ATEX approval 3D 70
Switching amplifiers with ATEX approval 70
Accessories for sensors with smooth sleeve 70
Accessories for threaded M8 housings 71
Accessories for threaded M12 housings 71
Accessories for threaded M18 housings 72
Accessories for threaded M30 housings 72
Accessories for rectangular housings 73
System components 73
Wiring diagrams 73 - 76
Scale drawings / drawing no. – CAD download: www.ifm.com 76 - 89
Inductive sensors
36
Sensors with increased sensing range for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS204
M12 / L = 50 7 nf brass 10...36 IP67 700 100 2 IFS205
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M12 / L = 45 4 f brass 10...36 IP67 700 100 1 IFS206
M12 / L = 50 7 nf brass 10...36 IP67 700 100 2 IFS207
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M12 / L = 70 4 f brass 10...30 IP67 500 100 3 IFS208
M12 / L = 70 7 nf brass 10...30 IP67 500 100 4 IFS209
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19
M12 / L = 45 4 f brass 10...30 IP67 700 100 1 IFS200
M12 / L = 50 7 nf brass 10...30 IP67 700 100 2 IFS201
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
M12 / L = 46 4 f brass 10...36 IP67 700 100 5 IFS210
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8, 19
M12 / L = 40 4 f brass 10...36 IP67 110 100 6 IF5853
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...36 IP67 400 100 7 IGS204
Inductive sensors
37You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 51 12 nf brass 10...36 IP67 300 100 8 IGS205
M18 / L = 70 8 f brass 10...36 IP67 400 100 9 IGS212
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...36 IP67 400 100 7 IGS206
M18 / L = 51 12 nf brass 10...36 IP67 300 100 8 IGS207
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M18 / L = 70 8 f brass 10...30 IP67 400 100 9 IGS208
M18 / L = 70 12 nf brass 10...30 IP67 300 100 10 IGS209
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...30 IP67 300 100 7 IGS200
M18 / L = 51 12 nf brass 10...30 IP67 250 100 8 IGS201
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M18 / L = 70 8 f CuZn 10...36 IP68 400 100 11 IG5953
M18 / L = 72 12 nf brass 10...36 IP67 250 100 12 IG5954
M12 connector · Output function · 2-wire · AC/DC · Wiring diagram no. 4 · Connector group —
M18 / L = 53 8 f brass 20...140 IP67 25 / 100 200 13 IG0402
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8, 19
M30 / L = 44 12 f brass 10...36 IP67 100 100 14 II5811
Inductive sensors
38Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M30 / L = 50 15 f brass 10...36 IP67 100 100 15 IIS204
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M30 / L = 50 15 f brass 10...36 IP67 100 100 15 IIS208
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M30 / L = 70 15 f brass 10...30 IP67 100 100 16 IIS206
f = flush / nf = non flush
Sensors for industrial applications, threaded housings
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M5 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 17 IY5029
M5 / L = 27 1.5 nf stainless steel 10...30 IP67 1800 100 18 IY5049
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
M5 / L = 45 0.8 f stainless steel 10...36 IP65 2000 100 19 IY5036
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M8 / L = 35 1 f brass 10...36 IP67 750 200 20 IE5072
M8 / L = 50 1 f brass 10...36 IP67 750 200 21 IE5121
M8 / L = 20 1.5 f stainless steel 10...30 IP67 4000 200 22 IE5348
M8 / L = 27 2 f high-grade st. steel 10...30 IP67 1500 100 23 IE5368
Inductive sensors
39You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M8 / L = 35 2 nf PBT 10...36 IP67 800 200 20 IE5099
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
M8 / L = 50 2 nf PBT (Pocan) 5...36 IP67 2000 200 21 IE5202
Cable 2 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 29
M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5343
Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 1, 2, 3
M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5344
Cable with connector 0.3 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M8 / L = 37 3 f brass 10...30 IP67 1000 100 24 IE5351
M8 / L = 37 5 nf brass 10...30 IP67 700 100 25 IE5352
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
M8 / L = 50 2 f brass 10...36 IP67 1000 250 26 IE5287
M8 / L = 30 2 f high-grade st. steel 10...30 IP67 / 1500 100 27 IE5366
M8 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 1,2, 3
M8 / L = 40 3 f brass 10...30 IP67 1000 100 28 IE5338
M8 / L = 40 5 nf high-grade st. steel 10...30 IP67 700 100 29 IE5340
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M8 / L = 53 1 f brass 10...36 IP67 750 200 30 IE5090
Inductive sensors
40Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M8 / L = 62 2 f brass 10...36 IP67 1000 250 31 IE5312
M8 / L = 62 4 nf brass 10...36 IP67 300 200 32 IE5288
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M8 / L = 62 2 f brass 10...36 IP67 800 250 33 IE5327
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M8 / L = 69 1 f brass 5...36 IP67 2700 200 34 IE5203
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M12 / L = 45 2 f brass 10...36 IP67 700 100 1 IFS214
M12 / L = 70 2 f brass 10...36 IP67 700 100 3 IFS216
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M12 / L = 35 2 f brass 10...36 IP67 1500 150 35 IF5188
M12 / L = 71 2 f brass 10...55 IP67 800 250 36 IF5297
M12 / L = 71 2 f PBT 10...55 IP67 800 250 36 IF5313
M12 / L = 35 4 nf brass 10...36 IP67 1500 150 37 IF5249
M12 / L = 71 4 nf brass 10...36 IP67 1500 250 38 IF5329
M12 / L = 71 4 nf PBT 10...36 IP67 400 250 36 IF5345
Inductive sensors
41You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
M12 / L = 71 2 f brass 10...55 IP67 1100 400 36 IF5645
M12 / L = 71 4 nf brass 10...55 IP67 1500 400 38 IF5646
M12 / L = 71 4 nf PBT 10...55 IP67 1500 400 36 IF5597
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M12 / L = 83 2 f brass 10...55 IP67 1100 300 39 IF5598
M12 / L = 83 4 nf brass 10...55 IP67 1500 300 40 IF5647
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 70 5 f brass 10...36 IP67 400 100 9 IGS216
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M18 / L = 38 5 f brass 18...36 IP67 500 150 41 IG5221
M18 / L = 80 5 f brass 10...36 IP67 500 250 42 IG5397
M18 / L = 80 5 f PBT 10...36 IP67 500 250 42 IG5399
M18 / L = 80 8 nf brass 10...36 IP67 300 250 43 IG5398
M18 / L = 80 8 nf PBT 10...36 IP67 300 250 42 IG5401
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
M18 / L = 80 5 f brass 10...55 IP67 700 400 42 IG5594
M18 / L = 80 8 nf PBT 10...55 IP67 300 400 42 IG5533
Inductive sensors
42Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M18 / L = 70 5 f brass 10...55 IP67 700 400 44 IG5595
M18 / L = 76 8 nf brass 10...55 IP67 300 400 45 IG5597
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 30
M18 / L = 110 5 f PBT 10...55 IP65 800 400 46 IG5718
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M30 / L = 81 10 f PBT 10...36 IP67 250 250 47 II5369
M30 / L = 81 15 nf PBT 10...36 IP67 250 250 47 II5300
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M30 / L = 78 10 f brass 10...55 IP67 450 400 48 II5490
M30 / L = 78 15 nf brass 10...55 IP67 200 400 49 II5492
M12 connector · Output function · 2-wire · AC/DC · Wiring diagram no. 4 · Connector group —
M30 / L = 58 15 f brass 20...140 IP67 25 200 50 II0366
f = flush / nf = non flush
Sensors with analogue output 4...20 mA for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8
M12 / L = 70 0.4...4 nf brass 15...30 IP67 – – 4 IF6030
Inductive sensors
43You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8
M18 / L = 60 0.8...8 nf brass 15...30 IP67 – – 51 IG6083
M30 / L = 70 1.0...15 nf brass 15...30 IP67 – – 52 II5913
f = flush / nf = non flush
Sensors with analogue output 0...10 V for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function 0...10 V analogue · 3-wire · DC analogue · Wiring diagram no. 6 · Connector groups 7, 8
M12 / L = 70 0.4...4 nf brass 15...30 IP67 – – 4 IF6031
M18 / L = 60 0.8...8 nf brass 15...30 IP67 – – 51 IG6084
M30 / L = 70 1.0...15 nf brass 15...30 IP67 – – 52 II5914
f = flush / nf = non flush
Sensors with smooth sleeve for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
Ø 4 / L = 30 0.8 f stainless steel 10...36 IP65 2000 100 53 IZ5026
Ø 4 / L = 27 1.5 nf stainless steel 10...30 IP67 1800 100 54 IZ5047
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
Ø 4 / L = 45 0.8 f stainless steel 10...36 IP65 2000 100 55 IZ5035
Inductive sensors
44Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
Ø 4 / L = 41 1.5 nf stainless steel 10...30 IP67 1800 100 56 IZ5046
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
Ø 6.5 / L = 49 1.5 f brass 10...36 IP65 2000 250 57 IT5034
Ø 6.5 / L = 30 2 f high-grade st. steel 10...30 IP67 1500 100 58 IT5040
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
Ø 20 / L = 77 10 nf PBT 10...36 IP67 300 250 59 IA5082
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 30
Ø 20 / L = 92 10 nf PBT 10...55 IP65 300 300 60 IA5122
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
Ø 34 / L = 82 20 nf PBT 10...36 IP67 60 250 61 IB5096
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 7
Ø 34 / L = 98 20 nf PBT 10...36 IP65 350 250 62 IB5063
f = flush / nf = non flush
Sensors for industrial applications, rectangular housings
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
25 x 5 x 5 0.8 f aluminium 10...30 IP65 1000 100 63 IL5022
40 x 8 x 8 2 f brass 10...36 IP65 2000 250 64 IL5002
Inductive sensors
45You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
40 x 8 x 8 2 f brass 10...36 IP65 2000 250 65 IL5004
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
28 x 10 x 16 2 f PBT 10...36 IP67 800 200 66 IS5001
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 28
28 x 10 x 16 2 f PBT 5...36 IP67 2000 200 66 IS5026
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
28 x 10 x 16 2 f PBT 10...36 IP67 800 200 67 IS5035
28 x 10 x 16 4 nf PBT 10...36 IP67 2000 250 67 IS5071
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
40 x 12 x 26 4 nf PBT 10...36 IP67 1300 250 68 IN5129
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
40 x 12 x 26 2 f PBT 10...36 IP67 1400 250 69 IN5230
40 x 12 x 26 4 nf PBT 10...36 IP65 1300 250 69 IN5212
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
60 x 36 x 10 5 f PBT 10...36 IP67 400 250 70 IW5051
60 x 36 x 10 8 nf PBT 10...36 IP67 300 250 71 IW5058
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
60 x 36 x 10 8 nf PBT 10...36 IP65 300 250 72 IW5064
Inductive sensors
46Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 73 IM5115
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 73 IM5128
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 74 IM5119
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 73 IM5116
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 73 IM5130
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 74 IM5120
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 60 200 73 IM5117
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 74 IM5129
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 73 IM5123
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 73 IM5132
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 74 IM5124
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 73 IM5134
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 73 IM5133
Inductive sensors
47You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 74 IM5125
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 60 200 73 IM5136
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 74 IM5126
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 7
40 x 40 x 120 15 f PPE 10...36 IP65 350 250 75 IM5020
Terminals · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 30
40 x 40 x 120 15 f PPE 10...55 IP65 > 350 400 75 IM5037
40 x 40 x 120 20 nf PPE 10...55 IP65 > 300 400 75 IM5038
Terminals · Output function · 4-wire · DC PNP · Wiring diagram no. 9
40 x 40 x 118 15 f PBT 10...60 IP67 150 200 76 IV5003
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 31
90 x 60 x 40 40 nf PPE 10...36 IP65 15 250 77 IC5005
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5055
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5058
Inductive sensors
48Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 31
105 x 80 x 40 60 nf PPE 10...36 IP65 100 250 79 ID5005
M12 connector · Output function normally open / closed programmable *) · 3-wire · DC PNP · Wiring diagram no. 1 · Connectorgroups 7, 8
105 x 80 x 40 60 nf PPE 10...36 IP67 100 250 80 ID5046
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
120 x 80 x 30 50 nf PPE 10...36 IP67 100 250 81 ID5026
f = flush / nf = non flush
Ring sensors for industrial applications
Type Insidediameter
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
10.1 static 1.5 35 10...150 0.5 / 10 82 I7R201
10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 82 I7R203
15.1 static 2 35 10...150 0.5 / 10 83 I7R205
15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 83 I7R207
20.1 static 2.5 35 10...150 0.5 / 10 84 I7R209
20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 84 I7R211
25.1 static 3.0 35 10...150 0.5 / 10 85 I7R213
25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 85 I7R215
Inductive sensors
49You can find wiring diagrams and scale drawings from page 73
Type Insidediameter
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 7, 8
10.1 static 1.5 35 10...150 0.5 / 10 82 I7R202
10.1 dynamic 0.6 35 0.1...150 0.2 / 0.2 82 I7R204
15.1 static 2 35 10...150 0.5 / 10 83 I7R206
15.1 dynamic 0.8 35 0.1...150 0.2 / 0.2 83 I7R208
20.1 static 2.5 35 10...150 0.5 / 10 84 I7R210
20.1 dynamic 1.0 35 0.1...150 0.2 / 0.2 84 I7R212
25.1 static 3.0 35 10...150 0.5 / 10 85 I7R214
25.1 dynamic 1.2 35 0.1...150 0.2 / 0.2 85 I7R216
Tube sensors for industrial applications
Type Sensingrange
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 1, 2, 3
≤ 14 static 3.0 35 100 0.5 / 100 86 I85000
M8 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 1, 3
≤ 14 static 3.0 35 100 0.5 / 100 86 I85001
Cable with connector 0.09 m · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
≤ 14 static 3.0 35 100 0.5 / 100 87 I85002
Inductive sensors
50Product selectors and further information can be found at: www.ifm.com
Type Sensingrange
[mm]
Operatingprinciple
Minimumdiameter ofthe steel ball
[Ø mm]
Part speedmax.
[m/s]
Pulsestretching
[ms]
Response time /break time
[ms]
Draw-ingno.
Orderno.
Cable with connector 0.09 m · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 7, 8
≤ 14 static 3.0 35 100 0.5 / 100 87 I85003
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 1, 2, 3
≤ 20 dynamic 1.0 35 100 0.2 / 100 86 I85004
M8 connector · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 1, 3
≤ 20 dynamic 1.0 35 100 0.2 / 100 86 I85005
Cable with connector 0.09 m · Output function · 3-wire · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
≤ 20 dynamic 1.0 35 100 0.2 / 100 87 I85006
Cable with connector 0.09 m · Output function · 3-wire · DC NPN · Wiring diagram no. 11 · Connector groups 7, 8
≤ 20 dynamic 1.0 35 100 0.2 / 100 87 I85007
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · AC · Wiring diagram no. 12
M12 / L = 71 2 f PBT 20...250 IP67 25 250 36 IF0001*
M12 / L = 71 4 nf PBT 20...250 IP67 25 250 36 IF0003*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
M18 / L = 80 5 f PBT 20...250 IP67 25 / 50 350 / 100 42 IG0005*
M18 / L = 80 5 f brass 20...250 IP67 25 / 50 350 / 100 42 IG0011*
M18 / L = 80 8 nf PBT 20...250 IP67 25 / 50 350 / 100 42 IG0006*
Inductive sensors
51You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
Ø 20 / L = 92 10 nf PBT 20...250 IP65 25 / 70 350 / 100 60 IA0032*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
M30 / L = 81 10 f PBT 20...250 IP67 25 / 50 350 / 100 47 II0005*
M30 / L = 81 10 f brass 20...250 IP67 25 / 50 350 / 100 47 II0011*
M30 / L = 81 15 nf PBT 20...250 IP67 25 / 50 350 / 100 47 II0006*
M30 / L = 81 15 nf brass 20...250 IP67 25 / 50 350 / 100 88 II0012*
Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0004*
Ø 34 / L = 82 30 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0026*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 15
Ø 34 / L = 82 20 nf PBT 20...250 IP67 25 / 50 350 / 100 61 IB0017*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
Ø 34 / L = 98 20 nf PBT 20...250 IP65 25 / 50 350 / 100 62 IB0016*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
40 x 12 x 26 2 f PBT 20...250 IP67 25 / 50 350 / 100 68 IN0073*
40 x 12 x 26 4 nf PBT 20...250 IP67 25 / 50 350 / 100 68 IN0081*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 14
40 x 40 x 120 15 f PPE 20...250 IP65 20 / 55 350 / 100 75 IM0011*
40 x 40 x 120 20 nf PPE 20...250 IP65 20 / 55 350 / 100 75 IM0010*
Inductive sensors
52Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
1/2“ connector · Output function · 2-wire · AC/DC · Wiring diagram no. 16 · Connector group 16
40 x 40 x 66 35 nf PPE 20...250 IP67 20 / 50 350 / 100 89 IM0049*
M12 connector · Output function · 2-wire · AC/DC · Wiring diagram no. 16 · Connector group —
40 x 40 x 66 20 f PPE 20...250 IP67 25 / 140 350 / 100 90 IM0054*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 32
90 x 60 x 40 40 nf PPE 20...250 IP65 10 350 / 100 77 IC0003*
Cable 2 m · Output function · 2-wire · AC/DC · Wiring diagram no. 13
120 x 80 x 30 50 nf modified PPE 20...250 IP65 25 / 35 350 / 100 81 ID0014*
Terminals · Output function · 2-wire · AC/DC · Wiring diagram no. 32
105 x 80 x 40 60 nf modified PPE 20...250 IP65 4 350 / 100 79 ID0013*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for hygienic and wet areas with increased sensing range
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M12 / L = 45 4 f high-grade st. steel 10...36 IP68 / IP69K 800 100 1 IFT203
M12 / L = 70 4 f high-grade st. steel 10...36 IP68 / IP69K 700 100 3 IFT216
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
M12 / L = 50 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 91 IFT201
Inductive sensors
53You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M18 / L = 46 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 7 IGT203
M18 / L = 51 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 92 IGT200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector group —
M18 / L = 51 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 92 IGT201
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector group —
M18 / L = 70 8 f high-grade st. steel 10...30 IP68 / IP69K 400 100 93 IGT205
M18 / L = 70 12 nf high-grade st. steel 10...30 IP68 / IP69K 300 100 94 IGT202
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M18 / L = 57 8 f high-grade st. steel 10...36 IP68 / IP69K 600 100 95 IGT206
Cable 6 m · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 29
Ø 18 / L = 81 12 nf high-grade st. steel 10...30 IP68 / IP69K 300 100 96 IGT212
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M30 / L = 50 14 f high-grade st. steel 10...36 IP68 / IP69K 50 100 15 IIT205
f = flush / nf = non flush
Inductive sensors
54Product selectors and further information can be found at: www.ifm.com
Full-metal sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M12 / L = 60 3 f high-grade st. steel 10...36 IP68 / IP69K 100 100 97 IFT240
M18 / L = 70 5 f high-grade st. steel 10...36 IP68 / IP69K 100 100 44 IGT247
M30 / L = 70 10 f high-grade st. steel 10...36 IP68 / IP69K 50 100 98 IIT228
f = flush / nf = non flush
Sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M12 / L = 44 2 f high-grade st. steel 10...36 IP67 1200 250 99 IF5815
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector group —
M18 / L = 45 10 nf high-grade st. steel 10...36 IP67 300 250 100 IG5846
f = flush / nf = non flush
Sensors for oils and coolants with increased sensing range
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M8 / L = 50 2 f high-grade st. steel 10...36 IP67 1000 200 101 IE5381
M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC204
M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC206
Inductive sensors
55You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC207
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19
M12 / L = 45 4 f brass 10...30 IP68 700 100 1 IFC200
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M12 / L = 60 4 f brass 10...36 IP68 700 100 102 IF5934
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210
M12 connector · Output function · 2-wire · DC · Wiring diagram no. 27 · Connector groups 7, 8, 19
M12 / L = 60 4 f brass 10...36 IP68 700 100 97 IFC234
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M12 / L = 50 7 nf brass 10...36 IP68 700 100 2 IFC205
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19
M12 / L = 50 7 nf brass 10...30 IP68 700 100 2 IFC201
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M12 / L = 60 7 nf brass 10...36 IP68 500 100 103 IFC235
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M12 / L = 60 7 nf brass 10...36 IP68 700 100 103 IF5935
M12 / L = 60 4 f brass 10...36 IP68 700 100 102 IF5934
M12 / L = 60 7 nf brass 10...36 IP68 700 100 103 IF5935
Inductive sensors
56Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC204
M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC206
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...36 IP68 400 100 7 IGC207
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 26 · Connector groups 7, 8, 19
M18 / L = 46 8 f brass 10...30 IP68 400 100 7 IGC200
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC222
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7, 8, 19
M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC210
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M18 / L = 70 8 f brass 10...36 IP68 400 100 11 IG5951
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 51 12 nf brass 10...36 IP68 300 100 8 IGC205
M18 / L = 60 12 nf brass 10...36 IP68 300 200 51 IGC220
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M18 / L = 70 12 nf brass 10...36 IP68 300 100 10 IGC223
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M18 / L = 70 12 nf brass 10...36 IP68 300 100 94 IG5952
Inductive sensors
57You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M30 / L = 50 15 f brass 10...36 IP68 100 100 15 IIC200
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector groups 7, 8, 19
M30 / L = 70 15 f brass 10...30 IP68 100 100 16 IIC208
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M30 / L = 72 15 f brass 10...36 IP68 100 100 104 II5858
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M30 / L = 50 22 nf brass 10...36 IP68 100 100 105 IIC201
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 27 · Connector group 37
M30 / L = 72 22 nf brass 10...36 IP68 100 100 106 II5859
f = flush / nf = non flush
Full-metal sensors for oils and coolants
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M8 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
M8 / L = 50 2 fstainless steel 316L /
1.440410...36 IP67 100 100 107 IEC201
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M8 / L = 60 2 f high-grade st. steel 10...36 IP67 / IP68 100 100 108 IEC200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M12 / L = 60 3 f high-grade st. steel 10...36 IP67 / IP68 100 100 97 IFC258
Inductive sensors
58Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 70 5 f high-grade st. steel 10...36 IP67 / IP68 100 100 44 IGC248
M30 / L = 70 10 f high-grade st. steel 10...36 IP67 / IP68 50 100 98 IIC224
f = flush / nf = non flush
Full metal sensors for oils and coolants with correction factor K = 0
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M12 / L = 70 3 f brass 10...30 IP68 25 200 3 IFC211
M12 / L = 60 2.5 f stainless steel 10...36 IP68 100 100 97 IFC263
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M12 / L = 60 2.5 f stainless steel 10...36 IP68 100 100 97 IFC264
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8, 19
M18 / L = 70 4.5 f stainless steel 10...36 IP68 100 100 93 IGC249
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8, 19
M18 / L = 70 4.5 f stainless steel 10...36 IP68 100 100 93 IGC250
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 70 5 f brass 10...30 IP68 25 200 9 IGC211
Inductive sensors
59You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 17 · Connector groups 7, 8
M18 / L = 70 5 f brass 10...30 IP68 25 200 9 IGC215
f = flush / nf = non flush
Sensors for oils and coolants with correction factor K = 1
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 65 5 f high-grade st. steel 10...30 IP68 > 2000 200 109 IGC232
M30 / L = 65 10 f high-grade st. steel 10...30 IP68 1000 200 110 IIC218
M30 / L = 65 22 nf high-grade st. steel 10...30 IP68 1000 200 111 IIC219
f = flush / nf = non flush
Sensors for oils and coolants with ceramic sensing face
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M12 / L = 45 4 f brass 10...36 IP68 700 100 1 IFC206
M12 connector · Output function · 3-wire · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 25 · Connector groups 7,8
M12 / L = 70 4 f brass 10...30 IP68 500 100 3 IFC210
M18 / L = 70 8 f brass 10...30 IP68 400 100 9 IGC210
f = flush / nf = non flush
Inductive sensors
60Product selectors and further information can be found at: www.ifm.com
Sensors for oils and coolants, threaded housings
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 33
M8 / L = 42 2 f brass 10...55 IP67 1000 100 112 IE9203
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M8 / L = 42 2 f brass 10...55 IP67 1000 100 113 IE9902
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M8 / L = 69 1 f brass 5...36 IP65 2000 200 34 IE9940
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 33
M12 / L = 54 2 f brass 10...55 IP67 800 100 114 IF9222
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M12 / L = 54 2 f brass 10...55 IP67 800 100 115 IF9920
Cable 2 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 18
M18 / L = 54 5 f brass 10...55 IP67 700 400 116 IG5682
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M12 / L = 60 2 f brass 10...55 IP67 800 100 117 IF9924
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M18 / L = 58 5 f brass 10...55 IP67 700 400 118 IG9984
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 46 5 f brass 10...36 IP68 400 200 7 IGC226
Inductive sensors
61You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
M18 / L = 65 5 f brass 10...55 IP67 700 400 119 IG9983
f = flush / nf = non flush
Sensors for oils and coolants, rectangular housings
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
26 x 26 x 26 10 f polyamide 10...36 IP67 250 100 120 IO5017
Cable with connector 0.15 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
26 x 26 x 26 10 f polyamide 10...36 IP67 250 100 120 IO5018
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector groups 7, 8
26 x 26 x 43 10 f polyamide 10...36 IP67 250 100 121 IO5016
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 34 · Connector group —
40 x 40 x 54 15 f PA (polyamide) 10...36 IP67 200 100 122 IM5137
Cable with connector 0.8 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 35 · Connector group —
40 x 40 x 54 15 f PA (polyamide) 10...36 IP67 200 100 122 IM5138
M12 connector · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 35 · Connector group —
40 x 40 x 54 15 f PA (polyamide) 10...36 IP67 200 100 123 IM5127
f = flush / nf = non flush
Inductive sensors
62Product selectors and further information can be found at: www.ifm.com
Full-metal sensors with non-stick coating against weld spatter
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 37, 38
M8 / L = 60 2 fstainless steel 316L /
1.440410...36 IP67 / IP68 100 100 108 IER200
M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 97 IFR200
M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 44 IGR200
M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 98 IIR200
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 19 · Connector group —
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 124 IER206
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 20 · Connector group —
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 125 IFR206
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 126 IGR206
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 127 IIR206
Cable with connector 0.3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 3 · Connector group —
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 124 IER203
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 125 IFR203
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 126 IGR203
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 127 IIR203
Inductive sensors
63You can find wiring diagrams and scale drawings from page 73
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 21
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 128 IER204
Cable 3 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 22
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 129 IFR204
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 130 IGR204
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 131 IIR204
Cable 5 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 21
M8 / L = 45 2 f high-grade st. steel 10...36 IP67 150 100 128 IER205
Cable 5 m · Output function · 2-wire · DC PNP/NPN · Wiring diagram no. 22
M12 / L = 40 4 f high-grade st. steel 10...36 IP67 75 100 129 IFR205
M18 / L = 40 6 f high-grade st. steel 10...36 IP67 50 100 130 IGR205
M30 / L = 40 12 f high-grade st. steel 10...36 IP67 25 100 131 IIR205
f = flush / nf = non flush
Electromagnetic field immune sensors with correction factor K = 1
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 36, 37
M12 / L = 65 3 f brass 10...30 IP67 4000 200 132 IFW200
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M12 / L = 65 8 nf brass 10...30 IP67 4000 200 133 IFW201
Inductive sensors
64Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 65 5 f brass 10...30 IP67 2000 200 109 IGW200
M18 / L = 65 12 nf brass 10...30 IP67 2000 200 134 IGW201
M30 / L = 65 10 f brass 10...30 IP67 1000 200 110 IIW200
M30 / L = 65 22 nf brass 10...30 IP67 1000 200 135 IIW201
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 74 IM5119
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 74 IM5120
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 74 IM5129
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 74 IM5124
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 74 IM5125
40 x 40 x 54 40 nf PA (polyamide) 10...36 IP67 200 200 74 IM5126
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 200 200 73 IM5132
40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 200 200 73 IM5133
f = flush / nf = non flush
Inductive sensors
65You can find wiring diagrams and scale drawings from page 73
Electromagnetic field immune sensors
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector groups 36, 37
M12 / L = 60 2 f brass 10...36 IP67 1000 250 102 IF5750
M12 / L = 60 4 nf brass 10...36 IP67 1000 250 136 IF5751
M18 / L = 60 5 f brass 10...36 IP67 700 250 137 IG5647
M18 / L = 60 5 f brass 10...36 IP67 700 250 137 IG5667
M30 / L = 60 10 f brass 10...36 IP67 250 250 138 II5503
M12 connector · Output function · 4-wire · DC PNP · Wiring diagram no. 8 · Connector groups 36, 37
92 x 80 x 40 50 f PPE 10...36 IP67 70 250 78 ID5059
f = flush / nf = non flush
Sensors for mobile applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 5
M12 / L = 79 4 f stainless steel 10...36 IP67 / IP69K 400 100 139 IFM207
M12 / L = 79 7 nf stainless steel 10...36 IP67 / IP69K 300 100 140 IFM208
f = flush / nf = non flush
Inductive sensors
66Product selectors and further information can be found at: www.ifm.com
Fail-safe inductive sensors for series connection to IEC 62061 SILcl 3 and ISO 13849-1 PL e
Type Length
[mm]
Enablezone[mm]
Housingmaterial
UbDC[V]
Protection Response timeon removal /
approach [ms]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 36 · Connector group —
91 3...6 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 141 GG505S
91 1...4 f MS / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 142 GG507S
80 6...12 nf V4A / PEEK 19.2...30 IP 68 / IP 69K < 20 / < 200 143 GI505S
80 6...12 V4A / PEEK 19.2...30 IP 69 K < 20 / < 200 143 GI506S
66 10...15 f PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 144 GM504S
66 10...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 144 GM505S
f = flush / nf = non flush
Inductive sensors for safety-related applications, 2 x OSSD, SIL 2, PL d
Type Length
[mm]
Enablezone[mm]
Housingmaterial
UbDC[V]
Protection Response timeon removal /
approach [ms]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 37 · Connector group —
70 0.5...4 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 145 GF711S
70 1...8 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 146 GG711S
70 1...5 f MS / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 147 GG712S
70 1...15 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 148 GI711S
Inductive sensors
67You can find wiring diagrams and scale drawings from page 73
Type Length
[mm]
Enablezone[mm]
Housingmaterial
UbDC[V]
Protection Response timeon removal /
approach [ms]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 37 · Connector group —
70 1...10 f MS / PBT 19.2...30 IP 65 / IP 67 < 1 / < 1 149 GI712S
f = flush / nf = non flush
Inductive sensors for safety-related applications, 2 x OSSD, SIL 3, PL e
Type Length
[mm]
Enablezone[mm]
Housingmaterial
UbDC[V]
Protection Response timeon removal /
approach [ms]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 37 · Connector group —
80 6...12 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 1 / < 1 143 GI701S
66 10...15 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 1 / < 1 144 GM701S
– 4...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 1 / < 1 144 GM705S
f = flush / nf = non flush
Safety relays with relay outputs for fail-safe sensors
Type Description Orderno.
Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · – · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Type IIIC (EN 574)
G1501S
Safety relay · Relay outputs · can be set with and without timer function · Housing for DIN rail mounting · For the connection ofelectronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: · PL e (EN ISO 13849-1) · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574)
G1502S
Safety relays with solid state outputs for fail-safe sensors
Type Description Orderno.
Safety relay · Semi-conductor outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safesensors/switches and for use as two-hand control · – · Complies with the requirements: · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) ·Type IIIC (EN 574) · PL e (EN ISO 13849-1)
G1503S
Inductive sensors
68Product selectors and further information can be found at: www.ifm.com
Sensors with ATEX approval 1D / 2G
Type Dimensions
[mm]
Sensingrange[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 23
M8 / L = 30 1 f brass 8.2 DC 7.5...30 80 70 2000 150 NE5001
M12 / L = 30 2 f brass 8.2 DC 7.5...30 140 340 1200 151 NF5002
M12 / L = 30 4 nf brass 8.2 DC 7.5...30 140 130 1500 152 NF5004
M18 / L = 33 5 f brass 8.2 DC 7.5...30 145 45 720 153 NG5002
M18 / L = 33 8 nf brass 8.2 DC 7.5...30 155 50 300 154 NG5004
M30 / L = 41 10 f brass 8.2 DC 7.5...30 145 140 450 155 NI5002
f = flush / nf = non flush
Sensors with ATEX approval 1D / 1G / 2G
Type Dimensions
[mm]
Sensingrange[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
M12 connector · Output function · 2-wire · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 24 · Connector group —
40 x 40 x 66 35 nf PPE 8.2 DC 7.5...30 220 710 100 90 NM501A
f = flush / nf = non flush
Inductive sensors
69You can find wiring diagrams and scale drawings from page 73
Sensors with ATEX approval 2D
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Terminals · Output function · 3-wire · DC PNP · Wiring diagram no. 38
105 x 80 x 40 60 nf PPE 10...36 IP65 4 40 156 ID501A
f = flush / nf = non flush
Sensors with ATEX approval 3D
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · 3-wire · DC PNP · Wiring diagram no. 1 · Connector group —
M18 / L = 46 8 f high-grade st. steel 10...36 IP67 500 100 7 IGT20A
f = flush / nf = non flush
Switching amplifiers with ATEX approval
Type Description Orderno.
Amplifier · NV1121/230VAC/RL/1D/1G · ATEX approval · Group II, category (1) G D · 1-channel · Relay output · Programmableoutput function · Short-circuit and wire monitoring
N0031A
Accessories for sensors with smooth sleeve
Type Description Orderno.
Mounting clip · Ø 18 mm · for smooth body switches - Ø 18 mm · Form V · Housing materials: V4A E11531
Mounting clamp · Ø 20 mm · Housing materials: Mounting clamp: PBT / socket screw: steel galvanised E10016
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Inductive sensors
70Product selectors and further information can be found at: www.ifm.com
Accessories for threaded M8 housings
Type Description Orderno.
Mounting clamp · Ø 8 mm · with end stop · for type M8 · Housing materials: PC E11521
Mounting sleeve · M12 x 1 - Ø 8 mm · 32 mm · with end stop · for type M8 · Housing materials: brass special coating E10848
Limit plungers · for types M8 x 1 · with Sn = 1 mm f, 2 mm f and 3 mm f · Housing materials: Limit plungers: free cutting steel /plunger: C45K hardened on front / nut: brass nickel-plated
E10154
Accessories for threaded M12 housings
Type Description Orderno.
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Mounting clip · Form O · for type M12 · Housing materials: stainless steel E11533
Mounting clamp · Ø 12 mm · Housing materials: PBT E10015
Mounting clamp · Ø 12 mm · with end stop · for type M12 · Housing materials: PC E11047
Mounting sleeve · M16 x 1 - Ø 12 mm · 45 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10741
Mounting sleeve · M16 x 1 - Ø 12 mm · 34 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E10806
Mounting sleeve · M16 x 1 - Ø 12 mm · with end stop · for type M12 · Housing materials: brass nickel-plated E11114
Inductive sensors
71You can find wiring diagrams and scale drawings from page 73
Accessories for threaded M18 housings
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Mounting clip · Form O · for type M18 · Housing materials: stainless steel E11534
Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076
Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048
Mounting sleeve · M24 x 1.5 - Ø 18 mm · 58 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10742
Mounting sleeve · M24 x 1.5 - Ø 18 mm · 36 mm · with end stop · for type M18 · Housing materials: brass nickel-plated E10807
Mounting sleeve · M22 x 1 - Ø 18 mm · with end stop · for type M18 · Housing materials: brass white bronze coated E11115
Accessories for threaded M30 housings
Type Description Orderno.
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
Mounting clamp · Ø 30 mm · with end stop · for type M30 · Housing materials: PC E11049
Mounting sleeve · M36 x 1.5 - Ø 30 mm · 58 mm · with end stop · for type M30 · Housing materials: brass nickel-plated E10743
Mounting sleeve · M36 x 1.5 - Ø 30 mm · 36 mm · with end stop · for type M30 · Housing materials: brass nickel-plated E10808
Inductive sensors
72Product selectors and further information can be found at: www.ifm.com
Accessories for rectangular housings
Type Description Orderno.
Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730
System components
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20719
Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20864
Mounting set · Ø 12.2 mm · Clamp mounting · aluminium profile · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20865
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20866
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20867
Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel
E20874
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
L+
L
1
4
3
2
L+
L
1
2
3
3
L+
L
1
4
4
3
4
L1
N
L+
L
Inductive sensors
73
Wiring diagrams
5
BN
BK
BU
L+
L
6
L+
L
1
3
2
7
/L+
L
13
/2 4
8
4
L
L+1
2
32:4:
9
L
L+
4
2
1
32:4:
10
L+
L
1
4
3
11
L+
L
1
4
3
12
BN
BU
L1
N
13
BN
BU
L+L1
LN
14
/1 3
/2 4
L1L+
LN
15
BN
BU
L+L1
LN
16
1
3
2
L1L+
LN
17
L+
L
1
4
3
18
BK
BK
L+
L
19
3
4 L
LL+
L+
20
L+
L
4
3
21
L
BN
BU
L+
22
BN
BU
L+
L
23
+BN
BU
24
L+
L2
1
1
52
1: connection to NAMUR-amplifier, 2: Potential equalisation plug housing
25
L+
L
1
4
L+
L
1
4
3
26
L+
L
1
4NPN
L+
L
1
4
3PNP
Inductive sensors
74Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
27
L+
L1
4L+
L
1
4
28
WH
BK
L+
L L
BK
WH
L+
29
L+
L
BN
BK
BU
L+
L
BN
BK
30
L+
L
/1 3
/2 4
L+
L/1 3
/2 4
31
2
4
3
1
5
L+
L
2
4
3
1
5
L+
L
32
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
DC PNP
L+
L
2
4
3
1
5
DC PNP
L+
L
33
BN
BU
L+
L
NPNBN
BU
L+
L
PNP
34
L+
L1
2L+
L
1
2
35
L+
L1
4L+
L
1
4
36
(BK)
3
1
4
2
L+
L
(BN)
A
TE
(BU)
(WH)+24 V
OUT
GND
IN
1
1: Safety-related logic unit
Inductive sensors
75
Wiring diagrams
37
(BK)
3
1
4
2
L+
L
(BN)
A2
A1
(BU)
(WH)+24 V
IN1
GND
IN2
1
1: Control monitor or PLC
38
5
4
3
2
1 L+
L
1
5
4
3
2
1 L+
L
1
1: fuse
Scale drawings / drawing no. – CAD download: www.ifm.com
1
453432
M12
x1
174
M12
x1
LED 4 x 90°
2
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
3
LED 4 x 90°
5970
50
M12
x1
174
M12
x1
4
45
M12
x1
174
5
M12
x1
5970
LED 4 x 90°
5
3530
M12
x1
174
46
LED 4 x 90°
38
M8
x1
6
M12
x1
11
10
4
17
2 LED 5 35
7
M18
x1
M12
x1
3033
4635
424LED 4 x 90°
8M
18x1
M12
x1
2538
5140
424
10
LED 4 x 90°
9
M18
x1
M12
x1
49
56,5
70
59
424LED 4 x 90°
10
M18
x1
M12
x1
40
58
70
LED 4 x 90°
60
10
4
24
Inductive sensors
76Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
11
M18
x1
M12
x1
4956
7059
424LED 4 x 90°
12
60
M18
x1
4
M12
x1
4253
72
8
61
LED 24LED 4 x 90°
13
M18
x1
LED
M12
x1
424
3653
14
M30
x1,5
44237
26
528 36
1: 2 LEDs
15
39
33
M30
x1,5
37
50
M12
x1
LED 4 x 90° 5 36
16
59
53
M30
x1,5
57
70
M12
x1
LED 4 x 90° 536
17
8LED
20
2530
M5
x0,
5
2,7
18
15,5
LED
2427
M5
x0,
5
7
2
19
LED 4 x 90° 8
22
45
M5
x0,
5
2,7
M8
x1
36
20
2735
M8
x1LED 4
13
21
3942
50
LED
M8
x1
413
22
20
LED
M8
x1
4
13
23
27
M8
x1
4LED
13
25
Inductive sensors
77
Scale drawings / drawing no. – CAD download: www.ifm.com
24
35
LED
M8
x1
413
2
25
27
LED
M8
x1
413
82
26
38,542,5
M8
x1
4
13
M8
x1
LED 4 x 90°
50
27
18,5
30
M8
x1
4
13
M8
x1
22,5
LED 4 x 90°
28
4
13
28,5
40
M8
x1
LED 4 x 90°
M8
x1
32,5
29
23
40
M8
x1
LED 4 x 90°
4
13
M8
x1
832,5
30
2734
M8
x1
LED 4
13
M12
x1
53
31
M8
x1
4
13
M12
x1
6250
40
LED 4 x 90°
32
M8
x1
4
13
M12
x1
624738 2
LED 4 x 90°
33
M8
x1
4
13
M12
x1
6247
40
LED 4 x 90°
34
3842
M8
x1
LED
4
13
69
M12
x1
35
3524
M12
x1
4LED
17
9
18
36
9
18 7160
50
M12
x1
LED 174
37
4
3524
M12
x1
4LED
17
9
18
Inductive sensors
78Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
389
18 716046
M12
x1
LED 174
4
39
M12
x1
7460
51
M12
x1
LED 174
83
40
83
6047
M12
x1
LED 174
4
M12
x1
74
41
3827
M18
x1
4LED 24
9
18
42
24LED
801869
58
M18
x1
4
9
43
24LED
80186950
M18
x1
4
9
8
44
5957
50
M18
x1
4
M12
x1
70
24LED 4 x 90°
45
24
675542
M18
x1
4LED
8
M12
x1
76
46
79
24
50
M18
x1
4
110
20
30
81LED
47
36
8167
59
5
M30
x1,5
9
18
LED
48
36
685350
5LED
M30
x1,5
M12
x1
78
49
15
36
6853
35
5LED
M30
x1,5
M12
x1
78
50
4058
M12
x1
M30
x1,5
LED 5
36
Inductive sensors
79
Scale drawings / drawing no. – CAD download: www.ifm.com
51
M18
x1
30 10
M12
x1
47
60
LED 4 x 90°
49
424
52
LED 4 x 90°
59
38
M30
x1,5
5
57
70
36
M12
x1
15
53
LED
3020 4
54
LED
2715,4 4
55
36
LED 4 x 90°
M8
x1
4
45
22
56
34
LED 4 x 90°
M8
x1
4
41
20
57
40
M8
x1
6,5
49
LED 4 x 90°
58
3022,5
LED 4 x 90°
M8
x1 6,5
59
9
18
20
7766
55
LED
60
62
9263
30
LED
20
61
9
18
LED
34
8272
60
62
9870LED
34
38
60
63
5
145,5
3,5M1,6
25
2,814
LED
1
1: sensing face
Inductive sensors
80Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
64
20 10
5
M3
8
LED
40
520
IL 5003
4
IL 50021
1: sensing face
65
LED20 10
5
M3
8
40
520
M8
x1
LED
52
IL 5005IL 50041
1: sensing face
66
10,2
27,8
LED
5,6
165,1
22,2
2,75
3,1
3,5
2,83,1
LED
10,4
67
10,2
27,8
LED
5,6
M8x1
36,8
16
22,2
2,75
3,1
3,5
2,83,1
10,4
M8x1
LED
68
40
6
12
LED
4
2613
32
3,2 4
5
LED
3,2
18
1610
1
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.
69
4
213
32
3,2 45
LED
3,2
18
M8x1
9406
12
LED
1610
1
1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2 Nm (screw fixing class 8.8) when brass insert in contact withcounterpart.
70
LED10
4
20
12
4
60
36
16
3,2 28
3,2159
24
4,2
71
104
20
60
36
16
3,2 28
3,2159
24
4,2
LED
13
4
72
4LED
10
20
12
4
60
36
163,2
28
3,2158
24
4,2
M8
x1
73
Inductive sensors
81
Scale drawings / drawing no. – CAD download: www.ifm.com
73
40
66
40
54
M12
x130
30 2
2
1
46
46
5,5
5,5
29,5
1: LED yellow, 2: LED green
74
40
66
40
54
M12
x130
30 2
5,5
5,5
1
2
46
46
29,5
1: LED yellow, 2: LED green
75
40
10,4
45,6
LED
32
5,3
30
61,5
77
5,1
121101
LED
27
76
40
13
7,35,3
46
30
60
LED58
5,3
40118
LED
77
90
30
45
7,545
9,35,5
60
16
LEDpot.
4012
8
16
78
92
8040
7,565
65
5,59,3
M12
x1
112
40
LED171
20
1: mounting on DIN rail
79
105
80
40
7,565
65
5,59,3 40
12
27
18
LED
pot.
16
Inductive sensors
82Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
80
105
80
40
7,565
65
5,59,3
M12
x1
123
4012
2718
LED
pot.
16
81
120
45
8060
10100
69,5
4021
3015
pot.
LED
82
11
1015
42,5
60
5
M12 x1
2635
4,5
10,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
83
11
1015
42,5
60
5
M12 x1
2635
4,5
15,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
84
11
1015
42,5
60
5
M12 x1
2635
4,5
20,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
85
11
1015
42,5
60
5
M12 x1
2635
4,5
25,1
4,5
4
1510
68
20
1: Sensitivity, 2: Output function, 3: Pulse stretching time
86
M8x1
1720
709
12
1345
3 5,5
1: sensing face, 2: LED operating status, 3: LED switching status
87
1720
70
M12
x1
12
1345
3 5,5
1: sensing face, 2: LED operating status
Inductive sensors
83
Scale drawings / drawing no. – CAD download: www.ifm.com
88
8167
5
1544
36
M30
x1,5
9
18
LED
89
40
LED
4661
30 20
5,4
105,
4 6
8,5
33
1/2"
20U
NF
2A
LS10
0
4066
17
34
90
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4 6
16
33
91
32
M12
x1
17
4
5
M12
x1
3950
LED 4 x 90°
92
M18
x1
M12
x1
2538
5140
424
10
LED 4 x 90°
93
M18
x1
M12
x1
5057
7059
424LED 4 x 90°
94
M18
x1
M12
x1
3956
70
LED 4 x 90°
59
10
424
95
57
39,5
29
33
LED4 x 90°
M18
x1
424
5
96
5
64
LED 4 x 90°
81
5750
10
18
37
1
1: locating groove
97
4940
M12
x1
174
M12
x1
LED 4 x 90°
60
98
58
50
M30
x1,5
5
57
70
36
M12
x1
LED 4 x 90°
Inductive sensors
84Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
99
4425
M12
x1
4
17
LED
100
M18
x1
M12
x1
3233
45
LED 4 x 90°
8
424
101
M12
x1
5039
25
LED 4 x 90° 13
4
M8
x1
102
4840
M12
x1
174
M12
x1
5160
LED 4 x 90°
103
4935
M12
x1
174
M12
x1
LED 4 x 90°
60
5
104
60
50
M30
x1,5
M12
x1
5
53
7261
LED 36LED 4 x 90°
105
39
19
M30
x1,5
37
50
M12
x1
LED 4 x 90° 5
15
36
106
35 1560
M30
x1,5
M12
x1
5
7261
36LED 4 x 90°
107
3042,5
M8
x1
4
13
M8
x1
LED 4 x 90°
50
108
M8
x1
4
13
M12
x1
6049
33
LED 4 x 90°
109
M18
x1
4LED 4 x 90° 24
M12
x1
5254
65
45
110
53
49
M30
x1,5
5
52
65
M12
x1
LED 4 x 90° 36
Inductive sensors
85
Scale drawings / drawing no. – CAD download: www.ifm.com
111
54
32
M30
x1,5
5
52
65M
12x1
15
36LED 4 x 90°
112
13
35
M8
x1
4
LED 42
113
42
M12
x1
13
35
M8
x1
4
LED 42
114
LED
40
M12
x1
417
54
115
42
M12
x1
LED
40
M12
x1
417
54
116
24
5452
M18
x1
4LED
117
6041
M12
x1
4
17
LED
118
42
M12
x1
5852
M18
x1
4
24
LED
119
55
M18
x1
4LED 24M
12x1
4044
65
120
343
254
6
26 26LED
121
343
25
4
6
26
M12
x1
42,5
26
LED
Inductive sensors
86Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
122
40 40
54
30
46
5,5
30
46
LED
5,5
M12
x1
29,5
123
40
66
40
54
M12
x130
30 2
46
46
5,5
5,5
LED
29,5
124
M12
x1
14
≤ 49,3
LED
M8
x1
4535
74
13
125
M12
x1
14
49
M12
x1
4
LED
11 17
4030
126
M12
x1
14
49
LED
17
M18
x1
4
24
4030
127
M12
x1
14
49
40
536
LED
M30
x1,5
30
28
128
LED
M8
x1
4535
74
13
129
M12
x1
4
LED
11 17
4030
130
LED
17
M18
x1
4
24
4030
131
40
536
LED
M30
x1,5
30
28
Inductive sensors
87
Scale drawings / drawing no. – CAD download: www.ifm.com
132
54
52
M12
x1
4
M12
x1
LED 4 x 90°
65
17
133
5442
M12
x1
M12
x1
LED 4 x 90°
65
10
17
4
134
10
M18
x1
4LED 4 x 90° 24
M12
x1
35
5465
52
135
53
34
M30
x1,5
5
52
65
M12
x1
LED 4 x 90°
15
36
136
36
M12
x1
174
4
M12
x1
4851
60
LED 4 x 90°
137
24
4947
40
M18
x1
4
M12
x1
60
LED 4 x 90°
138
48
40
M30
x1,5
5
46,5
60
M12
x1
36LED 4 x 90°
139
5,4
7962
53
M12
x1
LED 4 x 90° 17
4
140
5,4
796248
LED 4 x 90° 17
4
M12
x1
5
141
M18
x1
55 10
M12
x1
90,5
LED 8 x 45°
79
424
142
65
M12
x1
LED 8 x 45°
90,5
424
M18
x1
143
LED 4 x 90°
69
39
M30
x1,5
5
67
80
36
M12
x1
15
Inductive sensors
88Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
144
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4
6
8,5
33
145
45
M12
x1
174
5
M12
x1
5970
LED
146
35
M12
x1
LED 2 x 180°
70,5
M18
x1
57
424
10
147
45
M12
x1
LED 2 x 180°
70,5
424
M18
x1
57
148
LED 4 x 90°
M30
x1,5
5
45
70
36
M12
x1
15
57
149
LED
M30
x1,5
5
45
70
36
M12
x1
57
150
30
M8
x1
4
13
151
30
M12
x1
4
2
17
152
430
M12
x1
4
2
17
153
33
M18
x1
4
2
24
154
M18
x1
4
2 33
8
24
155
2 41
5
M30
x1,5
36
156
105
80
40
7,565
65
5,59,3
24
40
12
2718
LED
pot.
16
Inductive sensors
89
High operational reliability due to increased noise immunity.
Sensing range adjustable by means of a potentiometer or pushbutton.
Plastic or metal housing for different applications.
Variable: connector, connection cable or connection terminals.
Assortment of tank and sight glassmounting acccessories.
Capacitive sensors
Capacitive sensors are used for the non-contact detection of any objects. In contrastto inductive sensors, which only detect metallic objects, capacitive sensors can alsodetect non-metallic materials. Typical applications are in the wood, paper, glass,plastic, food and chemical industries. In a packaging system, capacitive sensorsmonitor that the contents of a cardboard box is complete, for example, or checkthe presence of non-metallic caps. Another application is to monitor the conveyingof sheets of glass on a roller conveyor.
Operating principle
The capacitance between the active electrode of the sensor and the electrical earthpotential is evaluated. An approaching object influences the electrical alternatingfield between these two “capacitor plates” and, consequently, the capacitance. Thisapplies to metallic and non-metallic objects. By means of the potentiometer or thepushbutton the user can set the sensitivity.
Increased noise immunity
When detecting objects, very small changes in capacitance must be evaluated andconverted into switching signals. This makes high requirements for the electronics.The sensors must be designed so that they are insensitive to fluctuations of theparasitic basic capacitances, as these can amount to a multiple of the change incapacitance to be measured. Moreover, the sensors must be insensitive to electro-magnetic interference which typically occurs in the application area.
ifm electronic has developed future-oriented solutions to meet the high sensorrequirements. A patented circuit concept efficiently prevents the mentionedproblems and ensures reliable functioning for all relevant noise parameters.
Not only metal: Capacitive sensorsdetect almost allmaterials, herefor example a login a saw mill.
Capacitive sensors
90
Selection chart Page
Sensors for industrial applications, DC 92 - 93
Sensors for industrial applications, AC and AC/DC 93 - 94
Sensors for the detection of conductive media through a wall 94
Sensors with ATEX approval 95
Switching amplifiers with ATEX approval 95
Accessories mounting adapters 95
Accessories mounting components 96
Accessories mounting sets 96 - 97
Wiring diagrams 97 - 98
Scale drawings / drawing no. – CAD download: www.ifm.com 98 - 100
Capacitive sensors
91
Sensors for industrial applications, DC
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M18 / L = 84 8 nf PBT 10...36 IP67 50 250 1 KG5043
Cable 2 m · Output function · DC PNP/NPN · Wiring diagram no. 14
M18 / L = 84 8 nf PBT 10...55 IP67 50 400 1 KG5047
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
M12 / L = 60 4 f high-grade st. steel 10...36 IP65 50 100 2 KF5001
M12 / L = 61 8 nf high-grade st. steel 10...36 IP65 50 100 3 KF5002
Terminals · Output function · DC PNP · Wiring diagram no. 3
M18 / L = 110 8 nf PBT 10...36 IP65 50 250 4 KG5041
M12 connector · Output function · DC PNP · Wiring diagram no. 4 · Connector groups 7, 8
M18 / L = 93.8 8 nf PBT 10...36 IP67 50 250 5 KG5057
Terminals · Output function · DC PNP/NPN · Wiring diagram no. 15
M18 / L = 110 8 nf PBT 10...55 IP65 50 400 4 KG5040
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
M30 / L = 81 15 nf PBT 10...36 IP65 40 250 6 KI5002
Cable 2 m · Output function · DC PNP · Wiring diagram no. 5
M30 / L = 81 15 nf PBT 10...36 IP65 40 250 6 KI5001
connector (DIN EN 175301-803) · Output function · DC PNP · Wiring diagram no. 6 · Connector group —
M30 / L = 92 15 nf PBT 10...36 IP65 40 250 7 KI5038
Capacitive sensors
92Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 8 KI5085
M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 9 KI5087
Terminals · Output function · DC PNP · Wiring diagram no. 7
M30 / L = 125 15 nf PBT 10...55 IP65 40 250 10 KI5023
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
Ø 34 / L = 81 20 nf PBT 10...36 IP65 40 250 11 KB5004
M12 connector · Output function · DC PNP · Wiring diagram no. 4 · Connector groups 7, 8
Ø 34 / L = 93 20 nf PBT 10...36 IP65 40 250 12 KB5062
Cable 2 m · Output function · DC PNP · Wiring diagram no. 1
120 x 80 x 30 60 nf modified PPO 10...36 IP65 10 250 13 KD5022
Terminals · Output function · DC PNP · Wiring diagram no. 16
105 x 80 x 40 60 nf modified PPO 10...36 IP65 10 250 14 KD5018
f = flush / nf = non flush
Sensors for industrial applications, AC and AC/DC
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
Cable 2 m · Output function · AC/DC · Wiring diagram no. 8
M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 6 KI0016*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 9
M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 6 KI0020*
Capacitive sensors
93You can find wiring diagrams and scale drawings from page 97
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
connector (DIN EN 175301-803) · Output function · AC/DC · Wiring diagram no. 10 · Connector group —
M30 / L = 92 15 nf PBT 20...250 IP65 25 / 40 250 7 KI0040*
Terminals · Output function · AC/DC · Wiring diagram no. 11
M30 / L = 125 15 nf PBT 20...250 IP65 25 / 40 250 10 KI0024*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 8
Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 11 KB0025*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 9
Ø 34 / L = 81 20 nf PBT 20...250 IP65 25 / 40 250 11 KB0029*
Cable 2 m · Output function · AC/DC · Wiring diagram no. 8
120 x 80 x 30 60 nf modified PPO 20...250 IP65 10 250 13 KD0012*
Terminals · Output function · AC/DC · Wiring diagram no. 17
105 x 80 x 40 60 nf modified PPO 20...250 IP65 10 250 14 KD0009*
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors for the detection of conductive media through a wall
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
Cable with connector 0.1 m · Output function · 1x open collector DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 15 KQ6005
f = flush / nf = non flush
Capacitive sensors
94Product selectors and further information can be found at: www.ifm.com
Sensors with ATEX approval
Type Dimensions
[mm]
Sensingrange[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 12
M30 / L = 81 15 nf PBT 8.2 DC 7.5...15 375 1 40 6 KI5030
Terminals · Output function · DC PNP · Wiring diagram no. 7
M30 / L = 151 15 nf PBT 10...30 DC – – – 10 16 KI5065
Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 13
M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375 1 40 17 KX5001
f = flush / nf = non flush
Switching amplifiers with ATEX approval
Type Ub
[V]
Power / currentconsumption
[VA] / [mA]
f
[Hz]
Ta
[°C]
Output Protection Draw-ingno.
Orderno.
230 1.0 / 10 -20...60 relay (1 changeover contact) IP20 18 N0031A
Accessories mounting adapters
Type Description Orderno.
Mounting adapter · M30 x 1.5 - G 1¼ · Housing materials: PVDF / EPDM E11036
Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: POM / EPDM E11033
Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: PVDF / EPDM E11034
Locknut · G 1¼ · for mounting adapter · Housing materials: PVDF E11030
Capacitive sensors
95You can find wiring diagrams and scale drawings from page 97
Accessories mounting components
Type Description Orderno.
Mounting clamp · Ø 12 mm · Housing materials: PBT E10015
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Mounting adapter for free-standing mounting · for type KQ5, KQ6 · Housing materials: adapter: PBT / inserts: brass / screw: steelgalvanised · Pack quantity: 1
E12153
Mounting adapter · Pipe and tube installation KQ5 / KQ6 with cable ties · Fixing of the types KQ5 and KQ6 to pipes and tubes ·Housing materials: Mounting adapter: PA 12 black
E12163
Accessories mounting sets
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20719
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20866
Capacitive sensors
96Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20867
Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel
E20874
Core colours
BN brown
BU blue
BK black
WH white
GN/YE green/yellow
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
L
L+
/2 4
1
3
4
L+
L
1
4
3
5
BN
BK
BU
L+
L
6
L+
L
1
3
2
7
/L+
L
13
/2 4
8
BN
BU
L+L1
LN
9
BN
BU
L+L1
LN
10
1
2
L1
N
L+
L
11
/1 3
/2 4
L1L+
LN
12
+BN
BU
13
BN
GN/YE
BU+
14
WH
BK
L+
L L
BK
WH
L+
15
L+
L
/1 3
/2 4
L+
L/1 3
/2 4
Capacitive sensors
97
Wiring diagrams
16
2
4
3
1
5
L+
L
2
4
3
1
5
L+
L
17
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
AC;DC NPN
L+N
LL1
2
4
3
1
5
DC PNP
L+
L
2
4
3
1
5
DC PNP
L+
L
Scale drawings / drawing no. – CAD download: www.ifm.com
1
24
58
4
84
M18
x1
pot.LED LEDpot.
2
40,2
38,2
M12
x1
M12
x1
59,8
1 2
1: LED 4 x 90°, 2: with pot.
3
34,6
M12
x1
5
M12
x1
41,661,2
1 2
1: LED 4 x 90°, 2: with pot.
4
80
24
67,250
M18
x1
4
110
20
30
81LED
17
1
1: with pot.
5
1
24
58
4
84
M18
x1
93,8
67,2
M12
x1
2
1: with pot., 2: LED
6
36
8159
5
M30
x1,5
9
18pot.LED
7
LED36
66
5
59
M30
x1,5
92
pot.
82
8
60
M30
x1,5
7790
LED (4 x 90°) 5
M12
x 1
361
1: Programming buttons
Capacitive sensors
98Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
9
60
M30
x1,5
7790
LED (4 x 90°) 5
M12
x 1
361
15
1: Programming buttons
10
36
6454
5
M30
x1,5
95125
37
25
88
LED pot.
11
9
18
34
8160 LED pot.
12
34
8160
M12
x1
93
LED pot.
13
120
45
8060
10100
69,5
4021
3015
pot.
LED
14
105
80
40
7,565
65
5,59,3 40
12
27
18
LED
pot.
16
15
3,2
48
3343,7
2
5,5 3
13,4
14
20
121
1: Programming buttons, 2: sensing face
16
36
6454
5
M30
x1,5
95125
37
88
LED POTI
26
151
63
24
17
822040
M34
x1,5
10
541
LEDpot.
Capacitive sensors
99
Scale drawings / drawing no. – CAD download: www.ifm.com
18
11235
,520
120
LED
1
1: Combicon plug with screw terminals (optional)
Capacitive sensors
100Product selectors and further information can be found at: www.ifm.com
Capacitive sensors
101
Detection also through non-magnetisable metals.
Small designs with very long sensing ranges up to 100 mm.
Cylinder and rectangular designs for demanding applications.
Wide temperature range for universal use.
Flush or non-flush installation innon-magnetisable metals.
Magnetic sensors
Magnetic sensors are used for the detection of positions without contact or wearand tear in control technology. They are used where inductive sensors reach theirlimits. The advantage: Compared to inductive sensors magnetic sensors have a considerably higher sensing range and smaller housings.
Since magnetic fields penetrate all non-magnetisable materials, the sensors candetect magnets through walls made of non-ferrous metal, stainless steel,aluminium, plastic or wood.
In gate systems, for example, the magnet sensor only detects the magnet which isto be detected. Any possible influences by aluminium in the environment do notimpact the sensor.
In the food industry the magnetic sensor is often used in connection with pigs (cleaning devices which pass through the inside of pipes). By means of magneticsensors their exact position can be detected from the outside through the wall ofthe stainless steel pipe.
Operating principle
Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant MagnetoResistive Effect) technology. The measuring cell consists of resistors with severalextremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventionalWheatstone bridge circuit two screened and two unscreened GMR resistors arecombined, a large signal proportional to the magnetic field is produced if a mag-netic field is present. As from a defined threshold value an output signal is switchedvia a comparator.
Installation
Magnetic sensors can be mounted flush with all materials (even metals) withoutreduction in the sensing range. Depending on the orientation of the magnetic fieldthe sensor can be damped from the front or from the side.
The sensor switchesas soon as themagnet has reachedthe switch-on point.The direction ofmovement of themagnet is notimportant.
Magnetic sensors
102
Selection chart Page
Sensors for industrial applications 104
Sensors for hygienic and wet areas 104
Accessories mounting components 105
Accessories mounting sets 105
Accessories damping magnets 105
Wiring diagrams 106
Scale drawings / drawing no. – CAD download: www.ifm.com 106
Magnetic sensors
103
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M8 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
M8 / L = 60 60 V4A (316S12) 10...30 IP67 5000 200 1 ME5010
Cable 2 m · Output function · DC NPN · Wiring diagram no. 2
M12 / L = 50 60 stainless steel 10...30 IP67 5000 200 2 MFS202
M12 connector · Output function · DC NPN · Wiring diagram no. 3 · Connector groups 7, 8
M12 / L = 60 60 stainless steel 10...30 IP67 5000 200 3 MFS203
M12 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M12 / L = 60 60 stainless steel 10...30 IP67 5000 200 3 MFS200
M18 / L = 60 70 stainless steel 10...30 IP67 5000 200 4 MGS200
M8 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 1, 2, 3
28 x 10 x 16 60 PBT 10...30 IP67 5000 200 5 MS5010
Sensors for hygienic and wet areas
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 60 70 V4A (316S12) 10...30 IP68 / IP69K 5000 200 4 MGT200
M18 / L = 60 100 V4A (316S12) 10...30 IP68 / IP69K – 200 4 MGT201
Magnetic sensors
104Product selectors and further information can be found at: www.ifm.com
Accessories mounting components
Type Description Orderno.
Angle bracket · for type M12 · Housing materials: stainless steel E10735
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Mounting clamp · Ø 12 mm · with end stop · for type M12 · Housing materials: PC E11047
Mounting clamp · Ø 18 mm · with end stop · for type M18 · Housing materials: PC E11048
Accessories mounting sets
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20718
Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel
E20719
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20866
Mounting set · Ø 18.5 mm · Clamp mounting · aluminium profile · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc / Cube: diecast zinc
E20867
Accessories damping magnets
Type Description Orderno.
Damping magnet · M 4.0 · Housing materials: Barium ferrite E10752
Damping magnet · M 5.0 · Housing materials: Barium ferrite E10753
Magnetic sensors
105You can find wiring diagrams and scale drawings from page 106
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
L+
L
1
4
3
2
L
BN
BK
BU
L+
3
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
4552
M8
x1
4
13
M8
x1
LED 4 x 90°
60
2
5029
M12
x1
4LED
17
3
4940
M12
x1
174
M12
x1
LED 4 x 90°
60
4
24
4947
40
M18
x1
4
M12
x1
60
LED 4 x 90°
5
10,2
27,8
LED
5,6
M8x1
36,8
16
22,2
2,75
3,1
3,5
2,83,1
10,4
M8x1
LED
Magnetic sensors
106Product selectors and further information can be found at: www.ifm.com
Magnetic sensors
107
Self-clamping fixture for easy adjustment and quick mounting.
Convenient: can be easily inserted into the slot from the top.
Suitable for almost all C and T slots.
Unit versions available with connection cable and M8 / M12 cable plug.
Wide selection of adapter accessories.
Cylinder sensors
Cylinder sensors are used for position detection of pistons in pneumatic cylinders.They are directly mounted onto the cylinder. The ring magnet attached to thepiston is sensed through the housing wall of non-magnetisable material(e.g. aluminium, brass or stainless steel). ifm electronic offers a standard solution fordifferent cylinder types and manufacturers.
Operating principle
ifm electronic‘s cylinder sensors use state-of-the-art GMR and AMR technology: AGMR element is made up of extremely thin magnetic layers, each separated by anonmagnetic layer. Without external field they align in an antiparallel manner whichresults in a defined electrical resistance. If these layers are exposed to a magneticfield, the magnetic layers align in a parallel manner. This results in a large change inresistance that is converted into a switching signal by the internal electronics.
An AMR element consists of thin ferromagnetic stripes. Electrical resistance ishighest without external magnetic fields. The effect of a magnetic field reducesresistance. This change is converted into a switching signal by the internalelectronics. Advantage: This method enables exact measurement of even very smallchanges of the magnetic field where space is extremely limited. This results in asmaller hysteresis and a short travel distance. So, the sensors can be used whereverexact positioning is required (e.g. short-stroke cylinder).
Response sensitivity
The response sensitivity applies equally to either magnetic polarity and withoutexternal field influence. The magnetic flux density in most pneumatic cylinders isbetween 5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set sothat they detect these magnetic fields safely.
Travel distance
The travel distance describes the section which is covered by the magnet in thesensing zone. It depends on the strength of the magnet. The short response timesof the sensors allow very high travel speeds.
Position sensing:Cylinder sensorsmonitor the positionof the piston in apneumatic cylinder.
Cylinder sensors
108
Selection chart Page
T-slot sensors for industrial applications 110
T-slot reed sensors for industrial applications, 2-wire 110 - 111
T-slot sensors for hygienic and wet ares 111
Non flush C-slot sensors for industrial applications 111
Flush C-slot sensors for industrial applications 112
Fixing straps for clean line cylinders 112
Adapters for tie rod and integrated profile 112 - 113
Adapters for trapezoidal slot cylinders 113
Various adapters and memorisation blocks 113
Wiring diagrams 113
Scale drawings / drawing no. – CAD download: www.ifm.com 114
Cylinder sensors
109
T-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5100
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 200 -25...85 1 MK5115
Cable 6 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 200 -25...85 1 MK5117
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 1, 2, 3
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 2 MK5101
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 3 MK5102
Cable with connector 0.3 m · Output function · 3-wire · DC NPN · Wiring diagram no. 3 · Connector groups 1, 3
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 2 MK5112
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 4 MK5107
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 200 -25...85 4 MK5108
T-slot reed sensors for industrial applications, 2-wire
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 4
30.5 x 5 x 6.5 PA (polyamide) 5...120 1000 IP67 100 -25...70 5 MR0100*
Cylinder sensors
110Product selectors and further information can be found at: www.ifm.com
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable with connector 0.3 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 5 · Connector groups 1, 3
30.5 x 5 x 6.5 PA (polyamide) 5...60 1000 IP67 100 -25...70 6 MR0101*
Cable with connector 0.3 m · Output function · 2-wire · AC/DC PNP/NPN · Wiring diagram no. 5 · Connector group -
30.5 x 5 x 6.5 PA (polyamide) 5...60 1000 IP67 100 -25...70 7 MR0107*
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 0,175 A (fast acting). Recommendation: check the unit for reliable function after ashort circuit.
T-slot sensors for hygienic and wet ares
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 / IP69K 100 -25...85 8 MK5111
Non flush C-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 1, 2, 3
17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 9 MK5301
17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 10 MK5302
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 11 MK5304
Cylinder sensors
111You can find wiring diagrams and scale drawings from page 113
Flush C-slot sensors for industrial applications
Type Dimensions
[mm]
Material Ub
[V]
f
[Hz]
Protection Iload
[mA]
Ta
[°C]
Draw-ingno.
Orderno.
Cable 2 m · Output function · 3-wire · DC PNP · Wiring diagram no. 1
25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 12 MK5312
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 1, 2, 3
25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 13 MK5310
25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 14 MK5311
Cable with connector 0.3 m · Output function · 3-wire · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
25.8 x 2.8 x 5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 15 MK5314
Fixing straps for clean line cylinders
Type Description Orderno.
Fixing strap for clean-line cylinders · Piston diameter · Ø 8...12 mm · Piston diameter 8...12 mm · for type MKT · Housing materials:adapter: PA / Fixing strap: stainless steel
E11816
Fixing strap for clean-line cylinders · Piston diameter · Ø 25...32 mm · Piston diameter 25...32 mm · for type MKT · Housingmaterials: adapter: PA / Fixing strap: stainless steel
E11818
Adapters for tie rod and integrated profile
Type Description Orderno.
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housingmaterials: aluminium / screw: stainless steel
E11797
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 9...15 mm · Housingmaterials: aluminium / screw: stainless steel
E11799
Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 14...20 mm · Housingmaterials: aluminium / screw: stainless steel
E11801
Cylinder sensors
112Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 3...5 mm · Housing materials: aluminium / screw: stainless steel
E11913
Adapter for tie rod cylinders (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · Clamping range 5...7 mm · Housing materials: aluminium / screw: stainless steel
E11912
Adapters for trapezoidal slot cylinders
Type Description Orderno.
Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw:stainless steel
E11796
Various adapters and memorisation blocks
Type Description Orderno.
Adapter for SMC cylinders ECDQ2 series (or cylinders of the same dimensions) · for types MKT (T-slot cylinder sensors) · T-slot rail,flat · Housing materials: aluminium / screw: stainless steel
E11890
Adapter for SMC cylinder CP95 · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11872
Core colours
BK black
BN brown
BU blue
Wiring diagrams
1
BN
BK
BU
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
4
N
L1BN
BU
L+
L
5
N
L11
4
L+
L
Cylinder sensors
113
Scale drawings / drawing no. – CAD download: www.ifm.com
1
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
2
L
M8
x1
37
5
2
6,2
5,7
25,3
5,1
6,5
LED
1: Fastening clamp, 2: sensing face
3
L
5
2
6,2
5,7
25,3
5,1
6,5
LED
M8
x1
41,5
1: Fastening clamp, 2: sensing face
4
L
5
2
6,2
5,7
25,3
5,1
6,5
LED
M12
x1
55
1: Fastening clamp, 2: sensing face
5
5
13
5,7
30,5
5,7
6,5
LED
2
1: Fastening clamp, 2: sensing face
6
5
13
5,7
30,5
5,7
6,5
LED
2L
M8
x1
37
1: Fastening clamp, 2: sensing face
7
5
13
5,7
30,5
5,7
6,5
LED
2L
M12
x1
55
1: Fastening clamp, 2: sensing face
8
L
5
2
6,2
5,7
25,3
5,1
6,5
LED
M12
x1
55
1: Fastening clamp, 2: sensing face
Cylinder sensors
114Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
9
M8
x1
L
37
17,5
7,7
LED
2,84,8
1 2
4,2
1: Fastening clamp, 2: sensing face
10
L
M8
x1
41,5
17,5
7,7
LED
2,84,8
1 2
4,2
1: Fastening clamp, 2: sensing face
11
L
M12
x1
55
17,5
7,7
LED
2,84,8
1 2
4,2
1: Fastening clamp, 2: sensing face
12
LED
2,84,8
1
25,8
5
6,5
2
1: Fastening clamp, 2: sensing face
13
M8
x1
L
37LED
2,84,8
1
25,8
5
6,5
2
1: Fastening clamp, 2: sensing face
14
LM
8x1
41,5LED
2,84,8
1
25,8
5
6,5
2
1: Fastening clamp, 2: sensing face
15
L
M12
x1
LED
2,84,8
1
25,8
5
6,5
2
40
1: Fastening clamp, 2: sensing face
Cylinder sensors
115
Dual inductive feedback sensors forvalves and actuators.
Straightforward fit to standard actuatorsbased on VDI / VDE 3845.
AS-i dual sensor for quick and safe installation due to “plug & play”.
Compact, weatherproof andlow maintenance.
Also available as complete set includingall the accessories for a valve.
Valve sensors
In industrial processes where liquids, air or gases are used valves are needed fordosing and control. There is a wide variety of valve types; butterfly or ball valvesbeing the most common quarter-turn types.
These valves are seldom operated manually. Pneumatic valve actuators are normallyused for mechanical positioning. The valve position must be monitored electronical-ly. On the one hand to provide a feedback to the controller when a certain position(e.g. “open” or “closed”) is reached. On the other hand it is necessary to monitorthe valves centrally.
Mechanical switches are still often used for position feedback on the actuator shaft.For other solutions several inductive sensors are used together with a switch targetfor position detection. Disadvantage: Mounting is mechanically complex. Wherethere are temperature fluctuations condensing humidity leads to corrosion and thusmalfunction.
Operating principle
An innovative design eliminates the disadvantages of these conventional solutions.In 1992 ifm electronic developed a standard which is now used by many leadingactuator manufacturers. A round switch target, known as a “puck”, with two metalscrews offset by 90° is mounted on the actuator shaft. The screws are located at adifferent height. A compact dual inductive sensor (type IND) with two integral sen-sors detects the upper or lower metal screw depending on the valve position andthus the two switch positions.
Advantages
Due to the simple construction the system operates safely with no wear at all. It isvirtually resistant to external influence and meets the protection rating IP 67. Undercertain conditions the unit can even be self-cleaning. Compared to conventionalsolutions the sensor weight is low. The sensors are also resistant to mechanicalstress such as vibration and shock.
Feedback: Monitoringof pneumatic and
manual valves mustbe possible.
Valve sensors
116
Selection chart Page
Sensors for industrial applications 118
Sensors with ATEX approval 1G/2G and 1D 118
Switching cams for sensors with quarter-turn actuators 118 - 119
Wiring diagrams 119
Scale drawings / drawing no. – CAD download: www.ifm.com 119
Valve sensors
117
Sensors for industrial applications
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection fAC / DC
[Hz]
IloadAC / DC
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 4 · Connector groups 7, 8
40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5224
M12 connector · Output function · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5225
M18 connector · Output function · AC/DC · Wiring diagram no. 2 · Connector group 13
40 x 26 x 40 4 nf PBT 20...250 IP67 25 / 50 350 / 100 2 IN0108*
Rd 24 x 1/8 connector 6 pins · Output function · DC PNP · Connector group 19
40 x 26 x 60 4 nf PBT 10...36 IP67 1300 250 3 IN5334
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Sensors with ATEX approval 1G/2G and 1D
Type Dimensions
[mm]
Sensingrange[mm]
Material Unom.at 1 KΩ
[V]
Ub
[V]
Internalcapacit.
[nF]
Internalinductance
[μH]
f
[Hz]
Draw-ingno.
Orderno.
M18 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 3 · Connector group 13
40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 4 NN5013
f = flush / nf = non flush
Switching cams for sensors with quarter-turn actuators
Type Description Orderno.
Target puck · Ø 53 mm · 3 possible switching flag positions · Housing materials: Target puck: PA 6 black / screws: V2A E17320
Valve sensors
118Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Target puck · Ø 65 mm · Housing materials: Target puck: PA 6 / screws: V2A E17327
Target puck · Ø 102 · Housing materials: Target puck: PA 6 / screws: V2A E17328
Core colours
BK black
BN brown
BU blue
WH white
Wiring diagrams
1
L
L+
3 BU
2 WH
4 BK
1 BN
2:4: A1
A2
2
L+L1
LNL+L1
LN
1
2
4
33:4: A1
A2
3
Out 2
4 BK
2 BU
3 WH
1 BNL+ 1
L+ 2
Out 1
1
1: connection to NAMUR-amplifier
4
L
L+
L+
L
2:1: A1
A2
2 WH
1 BN
4 BK
3 BUL
L+
L+
L
3:4: A1
A2
2 WH
1 BN
4 BK
3 BU
NPNPNP
Scale drawings / drawing no. – CAD download: www.ifm.com
1
40
2613
M12
x1
8,526
4,5
5,5
30
40
9
LED
A1
A2 6,5
LED
2
40
26
13
9
LED
A1
A2 6,5
LED
8,540
4,5
5,5
30M18
x1
67
3
M12
x1
4055
60
Rd24x1 8
78
30 2635
1
1: field connection
Valve sensors
119
Scale drawings / drawing no. – CAD download: www.ifm.com
440
2613
9
LED
A1
A2 6,5
LED
8,526
4,55,
5
30
49M
18x1
Valve sensors
120Product selectors and further information can be found at: www.ifm.com
Valve sensors
121
Photoelectric sensors
122
Photoelectric sensors
123
Infrared / red lightsensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
124 - 125126 - 138138 - 139139 - 143
Laser sensors
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
144 - 145146 - 151
151151 - 154
Distance detection
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
156 - 157158 - 159
159159
Fibre optics
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
160 - 161162 - 167167 - 168168 - 172
For specific systems
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
174 - 175176 - 179
179179 - 181
Safety light curtains / light grids
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
182 - 183184 - 185
185185
Visible red light for easy adjustment.
Versions for use in hygienic and wet areas.
LED display to check operation,switching status and function.
Quick set-up due to easy teaching.
Extensive range of system componentsfor easy and safe mounting.
Photoelectric sensors
Automation technology can no longer be imagined without photoelectric sensors as“artificial eyes”. They are used where safe and non-contact detection of the exactposition of objects is required. The material of the objects to be detected is of noimportance. Compared to inductive sensors photoelectric sensors have a muchhigher sensing zone.
Through-beam sensors
A through-beam sensor is distinguished by a long range. The system consists of twoseparate components: a transmitter and a receiver. The light only travels one way(from the transmitter to the receiver). Adverse effects in the applications, such asdust in the air, dirt on the lenses, steam or mist do not immediately interfere withthe system (high excess gain).
Retro-reflective sensors
For a retro-reflective sensor the transmitter and receiver are incorporated into onehousing. By means of a reflector the transmitted light is returned to the receiver.
Diffuse reflection sensors
A diffuse reflection sensor is used for the direct detection of objects. Transmitterand receiver are incorporated into one housing. The transmitter emits light whichis reflected by the object to be detected and seen by the receiver. This systemevaluates the reflected light of an object.
Therefore additional components (e.g. reflectors for retro-reflective sensors) are notnecessary to operate a diffuse reflection sensor.
Fixing options
ifm electronic offers a complete component system of easy-to-use mounting setsthat make installation easier for you. The solutions consist of a clamp which isfastened with only one screw, keeps the sensors safely in place and at the sametime guarantees free movement in all axes.
The reflector reflectsthe light beam: For aretro-reflective sensortransmitter and re-ceiver are integratedinto one housing.
Artificial eyes: Photo-electric sensors are
used to detect posi-tions in automation
technology.
Photoelectric sensors
124
Selection chart Page
Cylindrical OF housing (M12) BasicLine 126
Cylindrical housing OG (M18) BasicLine 126 - 127
Cylindrical housing OG (M18) PerformanceLine 127 - 128
Cylindrical housing OG (M18) BasicLine with lateral sensing face 128
Cylindrical housing OG (M18) WetLine for hygienic and wet areas 129
OG housing (M18), rectangular 129
Rectangular OH housing BasicLine 130
Rectangular housing O7 BasicLine 130 - 131
Rectangular housing OJ PerformanceLine, lateral sensing face 131 - 132
Rectangular housing OJ PerformanceLine, front sensing face 132 - 133
Rectangular housing O5 BasicLine 133
Rectangular housing O5 PerformanceLine 133 - 134
Rectangular housing O4 BasicLine 134
Prismatic reflectors, reflective tape and fixing components 134 - 135
Accessories OF housing 135
Accessories OG housing 135 - 136
Accessories OH housing 136
Accessories OJ housing 136
Accessories O5 housing 136 - 137
Accessories OL housing 137
Accessories O4 housing 137
Accessories for system components 137 - 138
Wiring diagrams 138 - 139
Scale drawings / drawing no. – CAD download: www.ifm.com 139 - 143
Infrared / red lightsensors
125
Cylindrical OF housing (M12) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8
Transmitter 4 m infrared 700 – 1 1 OF5021
Receiver 4 m infrared – H/D PNP 15 1 OF5022
Retro-reflective sensor · Cable 2 m · 10...36 DC · metal · IP67
Polarisation filter 0.2...0.8 m red 70 H/D PNP 16 2 OF5024
Retro-reflective sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8
Polarisation filter 0.2...0.8 m red 70 H/D PNP 15 1 OF5025
Diffuse reflection sensor · M12 connector · 10...36 DC · metal · IP65 · Connector groups 7, 8
Diffuse reflection sensor 1...200 mm infrared 92 H/D PNP 15 1 OF5012
Diffuse reflection sensor 1...400 mm infrared 185 H/D PNP 15 1 OF5027
Cylindrical housing OG (M18) BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Transmitter 20 m red 800 – 1 3 OGS200
Receiver 20 m red – D PNP 2 3 OGE200
Receiver 20 m red – H PNP 3 3 OGE201
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP200
Photoelectric sensors
126Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP201
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 · Connector groups 7, 8
Diffuse reflection sensor 2...600 mm red 50 H PNP 2 4 OGT200
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 · Connector groups 7, 8
Background suppression 15...250 mm red 15 H PNP 2 4 OGH200
Diffuse reflection sensor · Cable 2 m · 20...250 AC/DC (47...63 Hz AC) · plastics · IP67
Diffuse reflection sensor 1...600 mm infrared < 169 H AC/DC 4 5 OG0034
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Cylindrical housing OG (M18) PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Transmitter 25 m red 1000 – 1 6 OGS500
Receiver 25 m red – H/D PNP 2 7 OGE500
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Polarisation filter 0.03...5 m red 200 H/D PNP 2 7 OGP500
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Background suppression 15...300 mm red 25 H/D PNP 2 7 OGH500
Infrared / red lightsensors
127You can find wiring diagrams and scale drawings from page 138
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 · Connector groups 7, 8
Background suppression 15...300 mm red 25 H/D NPN 5 7 OGH504
Background suppression 15...300 mm red 25 H/D NPN 5 7 OGH502
Cylindrical housing OG (M18) BasicLine with lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP68 · Connector groups 7, 8
Transmitter 9 m red < 3000 – 1 8 OG5129
Receiver 9 m red – H PNP 6 8 OG5127
Receiver 9 m red – D PNP 7 8 OG5128
Retro-reflective sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP68 · Connector groups 7, 8
Polarisation filter 3 m red < 96 H PNP 6 8 OG5125
Polarisation filter 3 m red < 96 D PNP 7 8 OG5126
Diffuse reflection sensor · M12 connector · 10...30 DC · high-grade stainless steel · IP68 · Connector groups 7, 8
Background suppression 100 mm red < 16 H PNP 6 9 OG5123
Background suppression 200 mm red < 28 H PNP 6 9 OG5124
Photoelectric sensors
128Product selectors and further information can be found at: www.ifm.com
Cylindrical housing OG (M18) WetLine for hygienic and wet areas
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP67 / IP68 / IP69K · Connector group —
Polarisation filter 0.03...4 m red 160 D PNP 2 3 OGP300
Polarisation filter 0.03...4 m red 160 H PNP 3 3 OGP301
OG housing (M18), rectangular
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8
Polarisation filter 0.1...4 m red 160 D PNP 8 10 OGP280
Polarisation filter 0.1...4 m red 160 H PNP 3 10 OGP281
Polarisation filter 0.1...4 m red 160 D NPN 9 10 OGP282
Polarisation filter 0.1...4 m red 160 H NPN 10 10 OGP283
Diffuse reflection sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8
Background suppression 100 mm red 7 H PNP 3 10 OGH280
Background suppression 200 mm red 13 H PNP 3 10 OGH281
Background suppression 15...200 mm red 13 H/D PNP 2 11 OGH580
Background suppression 100 mm red 7 H NPN 10 10 OGH282
Background suppression 200 mm red 13 H NPN 10 10 OGH283
Background suppression 15...200 mm red 13 H/D NPN 5 11 OGH581
Infrared / red lightsensors
129You can find wiring diagrams and scale drawings from page 138
Rectangular OH housing BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 0.8 m red 10 D PNP 8 12 OH5011
Diffuse reflection sensor · Cable 2 m · 10...30 DC · plastics · IP67
Background suppression 1...15 mm red 2.5 H PNP 11 13 OH5008
Background suppression 1...30 mm red 4.5 H PNP 11 13 OH5006
Diffuse reflection sensor 2...50 mm red 3.5 H PNP 11 13 OH5004
Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Diffuse reflection sensor 2...50 mm red 3.5 H PNP 3 13 OH5005
Background suppression 1...30 mm red 4.5 H PNP 3 13 OH5007
Rectangular housing O7 BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector group -
Through-beam sensor 0...1.5 m red 90 – 1 14 O7S200
Through-beam sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3
Through-beam sensor 0...1.5 m red – D PNP 8 15 O7E200
Through-beam sensor 0...1.5 m red – H PNP 3 15 O7E201
Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3
Polarisation filter 0.03...1 m red 55 D PNP 8 16 O7P200
Photoelectric sensors
130Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3
Polarisation filter 0.03...1 m red 55 H PNP 3 16 O7P201
Diffuse reflection sensor · Cable with connector 0.2 m · 10...30 DC · plastics · IP65 · Connector groups 1, 2, 3
Background suppression 1...30 mm red 2.5 H PNP 3 17 O7H200
Background suppression 0...50 mm red 2.5 H PNP 3 17 O7H202
Background suppression 0...100 mm red 7 H PNP 3 17 O7H204
Rectangular housing OJ PerformanceLine, lateral sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 10 m red 1000 – 1 18 OJ5030
Receiver 10 m red – H/D PNP 12 18 OJ5031
Receiver 10 m red – H/D NPN 13 18 OJ5032
Transmitter 10 m red 1000 – 1 19 OJ5130
Receiver 10 m – – H/D PNP 12 19 OJ5131
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 0...2 m red 64 H/D PNP 12 18 OJ5026
Polarisation filter 0...2 m red 64 H/D NPN 13 18 OJ5027
Polarisation filter 0...2 m red 64 H/D PNP 12 19 OJ5126
Infrared / red lightsensors
131You can find wiring diagrams and scale drawings from page 138
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP67 · Connector groups 7, 8
Background suppression 15...400 mm red < 18 H/D PNP 12 20 OJ5078
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Diffuse reflection sensor 1...600 mm red 60 H/D PNP 12 21 OJ5022
Diffuse reflection sensor 1...600 mm red 60 H/D NPN 13 21 OJ5023
Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 12 21 OJ5071
Background suppression 15...400 mm red < 18 H/D PNP 12 22 OJ5048
Background suppression 15...400 mm red < 18 H/D PNP 12 23 OJ5148
Rectangular housing OJ PerformanceLine, front sensing face
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 10 m red 1000 – 1 24 OJ5108
Receiver 10 m red – H/D PNP 12 24 OJ5109
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 0...2 m red 64 H/D PNP 12 25 OJ5004
Polarisation filter 0...2 m red 64 H/D PNP 12 24 OJ5104
Diffuse reflection sensor · Cable with connector 0.15 m · 10...30 DC · plastics · IP67 · Connector groups 7, 8
Diffuse reflection sensor 1...600 mm red 60 H/D PNP 12 26 OJ5061
Photoelectric sensors
132Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Diffuse reflection sensor 1...1000 mm infrared 150 H/D PNP 12 27 OJ5070
Background suppression 15...400 mm red < 18 H/D PNP 12 28 OJ5044
Background suppression 15...400 mm red < 18 H/D PNP 12 29 OJ5144
Rectangular housing O5 BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Transmitter 20 m red 500 – 1 30 O5S200
Receiver 20 m red – D PNP 8 30 O5E200
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Polarisation filter 0.1...7 m red 175 D PNP 8 31 O5P200
Polarisation filter 0.1...7 m red 175 H PNP 14 31 O5P201
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP65 · Connector groups 7, 8
Background suppression 50...1400 mm red 50 H PNP 3 32 O5H200
Rectangular housing O5 PerformanceLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Transmitter 25 m red 625 – 1 30 O5S500
Infrared / red lightsensors
133You can find wiring diagrams and scale drawings from page 138
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Receiver 25 m red – H/D PNP 2 33 O5E500
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Polarisation filter 0.075...10 m red 250 H/D PNP 2 34 O5P500
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Background suppression 50...1800 mm red 50 H/D PNP 2 34 O5H500
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Background suppression 60...700 mm red 35 H/D PNP 2 34 O5H501
Rectangular housing O4 BasicLine
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Polarisation filter 0.3...18 m red 500 D PNP 8 35 O4P200
Polarisation filter 0.3...18 m red 500 H PNP 3 35 O4P201
Prismatic reflectors, reflective tape and fixing components
Type Description Orderno.
Prismatic reflector · Ø 20 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20003
Prismatic reflector · Ø 42 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20004
Prismatic reflector · Ø 50 mm · round · fixing by screw · for red light and infrared light retro-reflective sensors · Housing materials:plastics
E20956
Photoelectric sensors
134Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Prismatic reflector · Ø 80 mm · round · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20005
Prismatic reflector · 45 x 28 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20452
Prismatic reflector · 50 x 50 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20744
Prismatic reflector · 93 x 45 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20453
Mounting set · for reflector · Clamp mounting · rod mounting Ø 30 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: aluminium transparent anodised
E21007
Mounting set · for reflector · Ø 35 mm · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: stainless steel
E20907
Mounting set · for reflector · Ø 80 mm · Clamp mounting · free-standing M12 · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp: diecast zinc
E20914
Angle bracket · for reflector · 50 x 50 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 E20724
Reflective tape · TS-02 · 50 x 1000 mm · for red light and infrared light retro-reflective sensors · Housing materials: plastics E21015
Accessories OF housing
Type Description Orderno.
angle support · 90° · for type OF · Housing materials: housing: ABS / lens: PC E20590
Accessories OG housing
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Infrared / red lightsensors
135You can find wiring diagrams and scale drawings from page 138
Type Description Orderno.
Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecastzinc / fixture: steel
E20720
angle support · 90° · for OG5xxx sensors · for type OG · Housing materials: housing: ABS / lens: PC E20723
angle support · 90° · for OG5xxx sensors · for type OGP · Housing materials: housing: ABS / lens: glass E20740
Accessories OH housing
Type Description Orderno.
Mounting set · for type OH · Housing materials: ABS E21056
Accessories OJ housing
Type Description Orderno.
Basic clip · OJ · Housing materials: diecast zinc E20964
Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974
Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 /clamp: diecast zinc
E20968
Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 /clamp: stainless steel
E20969
Mounting set · OJ · for front lens · Clamp mounting · free-standing M8 · Housing materials: clamp: diecast zinc / fixture: stainlesssteel 316Ti / 1.4571
E20966
Accessories O5 housing
Type Description Orderno.
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087
Photoelectric sensors
136Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085
Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp:AlMgSi0.5 / fixture: AlMg3
E21122
Mounting set · Clamp mounting · with protective cover · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc
E21084
Mounting set · Clamp mounting · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 / clamp: diecast zinc
E21083
Accessories OL housing
Type Description Orderno.
Angle bracket · with protective cover · for type OL · Housing materials: stainless steel E20789
Mounting set · OL · Clamp mounting · rod mounting Ø 40 mm · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:aluminium transparent anodised
E21012
Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: fixture: stainless steel / clamp: diecast zinc
E20793
Mounting set · Clamp mounting · with protective cover · free-standing M12 · for type OL · Housing materials: clamp: stainless steel / fixture: stainless steel 316Ti / 1.4571
E20877
Accessories O4 housing
Type Description Orderno.
Angle bracket · O5, O4 · for mounting O5, O4 sensors instead of OL sensors · Dovetail clamp · Housing materials: Dovetail clamp:AlMgSi0.5 / fixture: AlMg3
E21122
Accessories for system components
Type Description Orderno.
clamp · Ø 12 mm; M10 · free-standing M10 · Housing materials: clamp: diecast zinc E20716
Infrared / red lightsensors
137You can find wiring diagrams and scale drawings from page 138
Type Description Orderno.
clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: diecast zinc E20796
mounting rod · Ø 10 / M8 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21081
mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938
mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940
Cube · M8 · aluminium profile · Housing materials: diecast zinc E20950
Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951
Core colours
BN brown
BU blue
BK black
Wiring diagrams
1
1
3
L+
L
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L1L+
LN
BN
BU
5
L+
L
1
4
3
6
L
L+
4
2 n.c.
1
3
7
L+
4
2 n.c.
1
3L
8
L+
L
1
4
3
9
L+
L
1
4
3
10
L+
L
1
4
3
11
L
BN
BK
BU
L+
12
L+
2
4
1
3 L2: Teach
13
L+
2
4
1
3 L2: Teach
14
L+
L
1
2
3
Photoelectric sensors
138Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
15
L
L+
3
2
4
1
L
L+
1
2
4
3
2: function check
16
L
BN
BK
BU
L+
L
BU
BK
BN
L+
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M12
x1
745554
M12
x1
3 LED 17
4
85
pot.
17
2
5540
M12
x1
17
4
52 LED
3
M18
x1
M12
x1
4047
6049
LED 4 x 90°
4
24
4
M18
x1
M12
x1
44
59
7261
LED 4 x 90°
50
1
4
24
1: with pot.
5
766453
M18
x1
4
5,2
78,5
24
LED
1
1: pushbutton
6
M18
x1
M12
x1
3459
7261
LED 4 x 90°
4
24
7
M18
x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
8
14,5
24
M18 x1
M12 x1
70,159
,334
416
LED 4 x 90°
8,2
9
LED 4 x 90°
13,6
75
M18 x1
M12 x1
646229
419
9,7
27
24
Infrared / red lightsensors
139
Scale drawings / drawing no. – CAD download: www.ifm.com
10
18
LEDs
38
M18
x1
M12 x1
11,5
35,415,9
24,1
52
243,3
11
3,3
M18
x1
M12 x1
11,5
35,415,9
24,1
52
24
LEDs
1
18
38
1: setting pushbuttons
12
3,9 9,6
12,5
3,2 15
2,9
7,6
6,4
20,6
25,15,
7
LED
13
3,9 9,6
12,5
3,2 15
2,9
7,6
7,2
20,6
25,15
LED
14
9
15
14,1
LED9
26
20,3
2,7
M3
15
9
15
26
20,3
14,1
2,7
M3
LED9
16
9
15
7,6
6,5
LED9
26
20,3
2,7
M3
17
9
15
6,5
7,8
LED9
26
20,3
2,7
M3
1845
11
LED
8,2
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
Photoelectric sensors
140Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
19
1
9
LED
4
11,6
M8x1
1
36,5
11
LED
8,2
43,5
1
24LED
35
8,5
1,8 5,
3 19
3,5
5
1: pushbutton
20
24
3,2
3,1
35
8,83,1
9
LED
4
1
1
48
M12
x1
11
LED
45
9,5
19,5
2
3
1: pushbutton, 2: Receiver, 3: Transmitter
21
11
LED
7,6
16,6
45
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
22
11
LED
45
9,5
19,5
1
9
LED
4
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
1: pushbutton
23
24LED
35
8,5
1,8 5,
3 193,5
5
1
9
LED
4
11,6
1
19,5
M8x1
36,5
11
LED
43,5
1
9,5
1: pushbutton
24
1LED
44
11,6
1
36,5
11
LED
43,5
M8x1
19
12412
LED
8,2
35
3,58,5
5
1,85,
3
1: pushbutton
Infrared / red lightsensors
141
Scale drawings / drawing no. – CAD download: www.ifm.com
25
45
11
LED
1
4
LED
4
1
24
8,2
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
1: pushbutton
26
45
11
LED
1
24
7,6
16,6
12
35
8,8
3,2
3,1
3,1
LED 1
4
LED
4
1
1: pushbutton
27
45
11
LED
1
3,1
24
7,6
16,6
12
35
8,8
3,2
3,1
LED
M8x1
1
4
LED
4
1
1: pushbutton
28
45
11
LED
1
24
9,5
19,5
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
LED
44
1
1: pushbutton
29
M8x1
1
36,5
11
LED
43,5
1LED
44
11,6
19124
12
LED
3,58,5
5
1,85,
3
9,5
35
19,5
1: pushbutton
30
LED
15,4
18,2
M12 x1
17
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
Photoelectric sensors
142Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
31
18,2
M12 x1
1736
,5
LED
15,4
5x9
625 1
56
6,446,8
25
70,3
5
LED6
1
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
32
1
38
10
1
LED
24,3
15,4
18,2
M12 x1
19,5
37
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
1: with pot., 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.
33
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
18,2
M12 x1
17
1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.
34
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
62
1: Programming buttons, 2: When a M5 mounting screw is used, the max. tightening torque is 2 Nm.
35
7,963,8
LED
40
5
8,5
74,4
86,2
1
8,5
40
5x10
1
M12 x1
27
21,1
50,9
LED
29,5
1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.
Infrared / red lightsensors
143
Detection of minute objects.
Clearly visible red light for easy settingto the object.
Automatic switch point setting bypressing a pushbutton.
Application sensors available for specialapplication areas.
System components available forfine adjustment.
Laser sensors
Laser sensors are used where detection of small objects or precise positioning isrequired. They are available as through-beam sensors, retro-reflective sensors ordiffuse reflection sensors.
Laser light consists of light waves of identical length which have a defined phaserelation (coherence). This results in an important feature of laser systems, that is thealmost parallel light beam. Result: Due to the small angle of divergence long rangesof up to 60 metres can be achieved. The laser spot which is also clearly visible atdaylight simplifies the alignment of the system. Apart from the advantages somepoints have to be taken into account for the selection of the suitable optical system:Compared to standard sensors the laser sensors have a reduced temperature range(-10...60 °C). Life is limited to approx. 50,000 hours. Basically laser systems aremore expensive than normal red light sensors. In view of the small light spot andthe often high ranges the system is more sensitive to vibrations than standardsensors.
Coherent: Lasersensors emit light ofa defined wave lengthand the same phaseposition.
Photoelectric sensors
144
Selection chart Page
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1 146
Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1 146 - 147
Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1 147 - 148
Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2 148
Rectangular housing O5 Laser class 1 148 - 149
Prismatic reflector 149
Accessories OG housing 149 - 150
Accessories OJ housing 150
Accessories O1 housing 150
Accessories O5 housing 150
Accessories for system components 151
Wiring diagrams 151
Scale drawings / drawing no. – CAD download: www.ifm.com 151
Laser sensors
145
Cylindrical OG housing (M18) Laser PerformanceLine, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8
Transmitter 2 m red 5 – 1 1 OGS701
Transmitter 60 m red 150 – 1 1 OGS700
Receiver 2 m red – H/D PNP 2 2 OGE701
Receiver 60 m red – H/D PNP 2 2 OGE700
Retro-reflective sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8
Polarisation filter 0.2...2 m red 5 H/D PNP 2 2 OGP701
Polarisation filter 0.2...15 m red 40 H/D PNP 2 2 OGP700
Diffuse reflection sensor · M12 connector · 10...36 DC · high-grade stainless steel · IP65 / IP67 · Connector groups 7, 8
Background suppression 20...200 mm red 1.2 H/D PNP 2 2 OGH700
Rectangular OJ housing Laser PerformanceLine, lateral sensing face, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 1 m red < 4 – 1 3 OJ5041
Receiver 1 m red – H/D PNP 3 3 OJ5042
Transmitter 15 m red < 24 – 1 3 OJ5038
Receiver 15 m red – H/D PNP 3 3 OJ5039
Photoelectric sensors
146Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 1 m red < 4 – 1 4 OJ5141
Receiver 1 m red – H/D PNP 3 4 OJ5142
Transmitter 15 m red < 24 – 1 4 OJ5138
Receiver 15 m red – H/D PNP 3 4 OJ5139
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 8 m red < 12 H/D PNP 3 3 OJ5036
Polarisation filter 8 m red < 12 H/D PNP 3 4 OJ5136
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Background suppression 7...150 mm red 0.8 H/D PNP 3 5 OJ5058
Background suppression 15...200 mm red 2x1 H/D PNP 3 6 OJ5054
Background suppression 7...150 mm red 0.8 H/D PNP 3 7 OJ5158
Background suppression 15...200 mm red 2x1 H/D PNP 3 8 OJ5154
Rectangular OJ housing Laser PerformanceLine, front sensing face, laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 1 m red < 4 – 1 9 OJ5019
Receiver 1 m red – H/D PNP 3 9 OJ5020
Laser sensors
147You can find wiring diagrams and scale drawings from page 151
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Transmitter 15 m red < 24 – 1 9 OJ5016
Receiver 15 m red – H/D PNP 3 9 OJ5017
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 8 m red < 12 H/D PNP 3 9 OJ5014
Diffuse reflection sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Background suppression 7...150 mm red 0.8 H/D PNP 3 10 OJ5056
Background suppression 15...200 mm red 2x1 H/D PNP 3 11 OJ5052
Rectangular O1 housing Laser PerformanceLine with background suppression, laser class 2
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Optical distance sensor · M12 connector · 10...30 DC · metal · IP67 · Connector groups 7, 8
Background suppression 0.2...10 m 5 6normally open /
closed programmablePNP
2 12 O1D101
Background suppression 0.2...10 m 5 6normally open /
closed programmableNPN
4 12 O1D104
Rectangular housing O5 Laser class 1
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Through-beam sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Transmitter 60 m red 150 – 1 13 O5S700
Receiver 60 m red – H/D PNP 2 14 O5E700
Photoelectric sensors
148Product selectors and further information can be found at: www.ifm.com
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Polarisation filter 15 m red 40 H/D PNP 2 15 O5P700
Diffuse reflection sensor · M12 connector · 10...36 DC · plastics · IP67 · Connector groups 7, 8
Background suppression 20...200 mm red 1.2 H/D PNP 2 16 O5H700
Prismatic reflector
Type Description Orderno.
Prismatic reflector · Ø 10 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainlesssteel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS
E20990
Prismatic reflector · Ø 15 mm · round · fixing by screw · M3 · for retro-reflective laser sensors · Housing materials: screw: stainlesssteel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA / base: ABS
E20992
Prismatic reflector · 14 x 23 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20989
Prismatic reflector · 50 x 10 mm · rectangular · for retro-reflective laser sensors · Housing materials: front plate: PMMA / base: ABS E20988
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Accessories OG housing
Type Description Orderno.
Fixture for mounting and fine adjustment of laser units · Ø 18.5 mm · Clamp mounting · rod or free-standing depending on theclamp · for type OG · Housing materials: stainless steel 316Ti / 1.4571
E20737
Mounting set · Ø 18.5 mm · Clamp mounting · rod mounting Ø 12 mm · for type OG, IG, KG · Housing materials: clamp: diecastzinc / fixture: steel
E20720
angle support · 90° · for OG5xxx sensors · for type OG · Housing materials: housing: ABS / lens: PC E20723
Laser sensors
149You can find wiring diagrams and scale drawings from page 151
Type Description Orderno.
angle support · 90° · for OG5xxx sensors · for type OGP · Housing materials: housing: ABS / lens: glass E20740
Accessories OJ housing
Type Description Orderno.
Fixture for mounting and fine adjustment of laser units · for front lens · for type OJ · Housing materials: diecast zinc E20975
Fixture for mounting and fine adjustment of laser units · for side lens · for type OJ · Housing materials: diecast zinc E20976
Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974
Accessories O1 housing
Type Description Orderno.
Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp ·Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel
E1D100
Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O1D · Housing materials: fixture: stainless steel / clamp: stainlesssteel / screws: stainless steel / Nut: high-grade stainless steel
E2D101
Mounting set · O1D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D111
Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM75+/-5 Shore A black / screws: stainless steel
E21133
Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM75+/-5 Shore A black / screws: stainless steel
E21171
Accessories O5 housing
Type Description Orderno.
Fixture for mounting and fine adjustment of laser units · Clamp mounting · rod or free-standing depending on the clamp · for typeO5 · Housing materials: stainless steel 316Ti / 1.4571
E20794
Photoelectric sensors
150Product selectors and further information can be found at: www.ifm.com
Accessories for system components
Type Description Orderno.
mounting rod · Ø 10 / M8 · Length: 150 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E21081
mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938
mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940
Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951
Wiring diagrams
1
1
3
L+
L
2
L+
L
1
4
3
3
L+
2
4
1
3 L2: Teach
4
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M18
x1
M12
x1
3459
7261
LED 4 x 90°
4
24
2
M18
x1
M12
x1
3459
7261
LED 4 x 90°
1
4
24
1: Programming buttons
3
45
11
LED
8,2
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
Laser sensors
151
Scale drawings / drawing no. – CAD download: www.ifm.com
4
1
9
LED
4
11,6
M8x1
1
36,5
11
LED
8,2
43,5
1
24LED
35
8,5
1,8 5,
3 19
3,5
5
1: pushbutton
5
11
LED
45
9,5
15,5
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
6
11
LED
45
9,5
19,5
1
9
LED
4
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
1: pushbutton
7
24LED
35
8,5
1,8 5,
3 19
3,5
5
1
9
LED
4
11,6
1
M8x1
36,5
11
LED
43,5
1
9,5
15,5
1: pushbutton
8
24LED
35
8,5
1,8 5,
3 19
3,5
5
1
9
LED
4
11,6
119
,5
M8x1
36,5
11
LED
43,5
1
9,5
1: pushbutton
9
45
11
LED
1
4
LED
4
1
24
8,2
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
1: pushbutton
Photoelectric sensors
152Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
10
45
11
LED
1
LED
44
1
24
9,5
15,5
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
1: pushbutton
11
45
11
LED
1
24
9,5
19,5
12
35
8,8
3,2
3,1
3,1
LED
M8x1
1
LED
44
1
1: pushbutton
12
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
1: 4-digit alphanumeric display, 2: Programming buttons
13
LED
15,4
18,2
M12 x1
26
5x9
625 1
56
6,446,8
25
70,3
5
LED
6
1
14
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
18,2
M12 x1
26
15
18,2
M12 x1
26
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED
6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
Laser sensors
153
Scale drawings / drawing no. – CAD download: www.ifm.com
16
18,2
M12 x1
19,5
37
1
LED
30,5
24,3
15,4
5x9
625 2
56
6,446,8
25
70,3
5
1
LED6
2
1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.
Photoelectric sensors
154Product selectors and further information can be found at: www.ifm.com
Laser sensors
155
Non-contact distance detection at a high range.
Analogue and switching outputs.
Small light spot and exact background suppression.
Compact and robust metal housing.
Unbeatable price / performance ratio.
Optical distance detection using PMD technology
For collision avoidance, completeness check, level monitoring or as diffuse reflectionsensor with an extraordinary range: The efector pmd distance sensors can be usedin a wide range of applications. Depending on the type, the laser sensors preciselydetermine distances up to 10 m or up to 75 m when a reflector is used. The robustmetal housing ensures operational reliability even under rough operatingconditions.
Operating principle
The efector pmd laser sensors operate to the time-of-flight principle.
The pmd sensor’s receiver element is a „System-on-Chip“ design. Both sensorelement and electronics for signal evaluation are integrated on a single silicon chipcalled a Photonic Mixer Device (PMD). Advantage: This innovative ifm design offershigh performance in a compact, industrially compatible housing – at a fraction ofthe price of conventional systems.
The determined distance is indicated on the 4-digit display and provided via thescalable analogue output (4…20 mA). The user can program two switching outputswhich switch when a certain distance is reached. Up to 50 measurements persecond are possible (adjustable). The light spot diameter is 6 mm at a 10 m dis-tance. This makes the sensor suitable for applications requiring exact backgroundsuppression. An outstanding feature of efector pmd is the extremely compact sizeof only 42 x 45 x 52 mm.
The efector pmdprovides an analoguesignal that is propor-tional to the object-to-sensor distance.
Collision avoidanceon an overhead con-
veyor: efector pmdmonitors distancesbetween products.
Photoelectric sensors
156
Selection chart Page
Rectangular O1 housing for optical distance measurement, laser class 1 158
Rectangular O1 housing for optical distance measurement, laser class 2 158
Rectangular O1 housing for optical level measurement, laser class 2 158
Accessories 158 - 159
Wiring diagrams 159
Scale drawings / drawing no. – CAD download: www.ifm.com 159
Distance detection
157
Rectangular O1 housing for optical distance measurement, laser class 1
Type Operating principle Range
[mm]
Samplingrate
[Hz]
Spot Ø atmax.range[mm]
Ub
[V]
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 7, 8
Optical distance sensor 0.3...6 m 1...33 6 18...30 1 1 O1D155
Rectangular O1 housing for optical distance measurement, laser class 2
Type Operating principle Range
[mm]
Samplingrate
[Hz]
Spot Ø atmax.range[mm]
Ub
[V]
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 7, 8
Optical distance sensor 1...75 m 1...33 150 18...30 1 1 O1D106
Optical distance sensor 0.2...10 m 1...33 6 18...30 1 1 O1D105
Optical distance sensor 0.2...10 m 1...50 6 18...30 1 1 O1D100
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 2 · Connector groups 7, 8
Optical distance sensor 0.2...10 m 1...50 6 18...30 2 1 O1D103
Rectangular O1 housing for optical level measurement, laser class 2
Type Operating principle Range
[mm]
Samplingrate
[Hz]
Spot Ø atmax.range[mm]
Ub
[V]
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scalable) · Wiring diagram no. 1 · Connector groups 7, 8
Optical level sensor 0.2...10 m 1...33 6 18...30 1 1 O1D300
Accessories
Type Description Orderno.
Fixture for mounting and fine adjustment of laser units · O1D · Clamp mounting · rod or free-standing depending on the clamp ·Housing materials: fixture: aluminium transparent anodised / plastics: POM / screws: stainless steel
E1D100
Photoelectric sensors
158Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O1D · Housing materials: fixture: stainless steel / clamp: stainlesssteel / screws: stainless steel / Nut: high-grade stainless steel
E2D101
Mounting set · O1D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E2D111
Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: PMMA transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel
E21133
Protective cover · O1D · Housing materials: bezel: ZnAl4Cu1 finish black / window: glass transparent and colourless / sealing: FPM 75+/-5 Shore A black / screws: stainless steel
E21171
Wiring diagrams
1
L+
L3
4
2
1
Out 1Out 2
4:2:
4
L
L+1
2
3Out 1Out 2
4:2:
2
L
L+
Out 2Out 1
2:4: 3
4
2
1L+
LOut 2Out 1
2:4: 3
2
4
1
Scale drawings / drawing no. – CAD download: www.ifm.com
1
52
1 2
30
45
2520
4,5
6
4559
42
M12x1
30
1: 4-digit alphanumeric display, 2: Programming buttons
Distance detection
159
Easy connection of different fibre optics.
Manual or automatic setting by meansof „teach in“.
LED display to check operation,switching status and function.
Various fibre materials for differentapplications.
Easy mounting, also on DIN rail possible.
Fibre optics systems
If there is only little mounting space for standard photoelectric sensors, fibre opticscan be used. They are connected via fibre optic amplifiers which contain the controlmonitor and photoelectric components. There are two operating principles:
Through-beam principle
Transmitting and receiving fibre optics are laid separately. The two ends (fibre opticheads) are mounted opposite each other. The light beam interruption is evaluatedaccording to the through-beam principle.
Diffuse reflection principle
Transmitting and receiving fibre optics are in one sheath and one sensing head.Evaluation is based on the diffuse reflection principle.
Classification of the fibre optics
Glass fibre optics
Fibre optics made of silicate glass are more resistant to heat, ageing and chemicalsthan acrylic fibre optics. They do not change their optical response when they arebent. Glass fibre optics cannot be cut to length by the user.
Acrylic fibre optics
Acrylic fibre optics are suited for standard applications if no particular demandssuch as heat or chemical resistance are made. They can be cut to length and are lessexpensive than glass fibre optics.
High-flex fibre optics
If the minimum bending radius is not adhered to, the fibre is damaged. High-flexfibre optics allow extremely small bending radii.
Three versions of fibre optic amplifiers are available
Some versions of the OOF and OBF housings feature special functions: the functioncheck output indicates a problem of the unit before it fails (short circuit on the out-put, internal fault, low excess gain). The pulse stretching function (delay time)allows the user to set a minimum pulse duration on the switching output.
Minute objects up to0.5 mm are detectedsafely.
Fibre optic systemscan also be mounted
in places where accessis difficult.
Photoelectric sensors
160
Selection chart Page
OOF amplifiers for acrylic fibre optics 162
OBF amplifiers for acrylic fibre optics 162
Acrylic fibre optics for OBF / OOF housings, through-beam system 162 - 163
Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible 163
Acrylic fibre optics for OBF / OOF housings, diffuse reflection system 163 - 164
OOF amplifiers for glass fibre optics 164
OKF amplifiers for glass fibre optics 164
OUF amplifiers for glass fibre optics 164 - 165
Glass fibre optics for OOF / OKF and OUF housings, through-beam system 165
Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system 166
Accessories 166 - 167
Wiring diagrams 167 - 168
Scale drawings / drawing no. – CAD download: www.ifm.com 168 - 172
Fibre optics
161
OOF amplifiers for acrylic fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OOF · M12 connector · plastics · DC · Wiring diagram no. 1 · Connector group 12
2 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 1 OO5000
Type OOF · M12 connector · plastics · DC · Wiring diagram no. 5 · Connector group 12
4 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 2 OO5001
Type OOF · M16 connector · plastics · DC · Wiring diagram no. 6 · Connector group —
6 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 3 OO5002
Type OOF · M16 connector · plastics · DC · Wiring diagram no. 7 · Connector group —
8 FE/FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 4 OO5003
OBF amplifiers for acrylic fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OBF · M12 connector · plastics · DC · Wiring diagram no. 8 · Connector groups 7, 8
1 FE/FT-11 red 0...2 m 0...100 mm H/D PNP/NPN 10...30 5 OBF500
Acrylic fibre optics for OBF / OOF housings, through-beam system
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FE-11 PMMA 60 / 130 / 160 aluminium -40...70 PE (polyethylene) 6 E20612
FE-11 PMMA 200 / 350 / 800 aluminium -40...70 PE (polyethylene) 7 E20603
FE-11 PMMA 200 / 450 / 800 aluminium -40...70 PE (polyethylene) 6 E20606
Photoelectric sensors
162Product selectors and further information can be found at: www.ifm.com
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FE-11 PMMA 400 / 900 / 1600 aluminium -40...70 PE (polyethylene) 8 E20753
FE-11 PMMA 1200 / 2000 / 3800 aluminium -40...70 PE (polyethylene) 9 E20752
FE-11 PMMA 140 / 230 / 400 stainless steel -40...70 PE (polyethylene) 10 E20714
FE-11 PMMA 200 / 450 / 800 stainless steel -40...70 PE (polyethylene) 11 E20750
Acrylic fibre optics for OBF / OOF housings, through-beam system, highly flexible
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FE-11 PMMA 250 / 350 / 750 aluminium -40...60 PE (polyethylene) 12 E21101
FE-11 PMMA 250 / 350 / 750 aluminium -40...60 PE (polyethylene) 6 E21102
Acrylic fibre optics for OBF / OOF housings, diffuse reflection system
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FT-11 PMMA 20 / 25 / 60 aluminium -40...70 PE (polyethylene) 13 E20639
FT-11 PMMA 60 / 70 / 300 aluminium -40...70 PE (polyethylene) 14 E20645
FT-11 PMMA 60 / 75 / 200 aluminium -40...70 PE (polyethylene) 15 E20758
FT-11 PMMA 70 / 100 / 300 aluminium -40...70 PE (polyethylene) 16 E20633
FT-11 PMMA 15 / 25 / 60 stainless steel -40...70 PE (polyethylene) 17 E20748
Fibre optics
163You can find wiring diagrams and scale drawings from page 167
Type System Fibre opticmaterial
RangeOB50.. / OBF5.. / OO50..
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FT-11 PMMA 20 / 25 / 60 stainless steel -40...70 PE (polyethylene) 18 E20711
FT-11 PMMA 40 / 60 / 150 stainless steel -40...70 PE (polyethylene) 19 E20715
OOF amplifiers for glass fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OOF · M12 connector · plastics · DC · Wiring diagram no. 5 · Connector group 12
4 FE/FT-00 red 0.4 m 0...200 mm H/D PNP 12...36 20 OO5005
OKF amplifiers for glass fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OKF · Cable 2 m · plastics · DC · Wiring diagram no. 9
1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 21 OK5001
Type OKF · M12 connector · plastics · DC · Wiring diagram no. 10 · Connector groups 7, 8
1 FE/FT-00 red 0...0.12 m 0...40 mm H/D PNP 10...50 22 OK5008
OUF amplifiers for glass fibre optics
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OUF · Cable 2 m · plastics · DC · Wiring diagram no. 2
1 FE/FT-00 infrared 0.12 m 40 mm H PNP 10...55 23 OU5001
1 FE/FT-00 infrared 0.12 m 40 mm D PNP 10...55 23 OU5002
Photoelectric sensors
164Product selectors and further information can be found at: www.ifm.com
Type Numberof inputchannels
Forfibreoptics
Typeof light
Sensingrange
through beam
Sensingrangediffuse
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Type OUF · M12 connector · plastics · DC · Wiring diagram no. 3 · Connector groups 7, 8
1 FE/FT-00 infrared 0...0.12 m 0...40 mm H PNP 10...50 24 OU5043
Type OUF · M12 connector · plastics · DC · Wiring diagram no. 4 · Connector groups 7, 8
1 FE/FT-00 infrared 0...0.12 m 0...40 mm D PNP 10...50 24 OU5044
Glass fibre optics for OOF / OKF and OUF housings, through-beam system
Type System Fibre opticmaterial
RangeOOF / OKF / OUF
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 25 E20059
FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 26 E20060
FE-00 glass 400 / 120 / 120 aluminium -20...80 PVC 27 E20062
FE-00 glass 160 / 50 / 50 stainless steel -20...80 PVC 28 E20061
FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 29 E20128
FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 30 E20130
FE-00 glass 400 / 120 / 120 aluminium -40...290 aluminium 31 E20129
FE-00 glass 400 / 120 / 120 stainless steel -20...150 metal silicone 32 E20493
Fibre optics
165You can find wiring diagrams and scale drawings from page 167
Glass fibre optics for OOF / OKF and OUF housings, diffuse reflection system
Type System Fibre opticmaterial
RangeOOF / OKF / OUF
[mm]
Sensinghead
material
Ambienttemperature
[°C]
Sheathingmaterial
Draw-ingno.
Orderno.
FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 33 E20051
FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 34 E20052
FT-00 glass 200 / 40 / 40 aluminium -20...80 PVC 35 E20054
FT-00 glass 24 / 6 / 6 stainless steel -20...80 PVC 36 E20230
FT-00 glass 24 / 8 / 8 stainless steel -20...80 PVC 28 E20053
FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 37 E20055
FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 38 E20056
FT-00 glass 200 / 40 / 40 aluminium -40...290 aluminium 39 E20058
FT-00 glass 24 / 8 / 8 stainless steel -40...290 aluminium 40 E20057
FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 41 E20489
FT-00 glass 200 / 40 / 40 stainless steel -20...150 metal silicone 42 E20494
Accessories
Type Description Orderno.
Lens attachment · Ø 5 mm / M3 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Packquantity: 1
E20679
Lens attachment · Ø 6 mm / M4 · for through-beam fibre optics · Housing materials: aluminium black anodised / glass · Packquantity: 1
E20680
Photoelectric sensors
166Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Lens attachment · D5x10-M4-ALU · for through-beam fibre optics · M4 · Housing materials: aluminium black anodised · Packquantity: 2
E20755
Angle bracket · OU · with mounting material · Housing materials: galvanised steel E20211
Mounting clamp · Ø 3 mm · for fibre optics · Housing materials: aluminium black anodised E20107
Mounting clamp · Ø 5 mm · for fibre optics · Housing materials: aluminium black anodised E20104
Core colours
BN brown
BU blue
BK black
WH white
Wiring diagrams
1
L+
L
1
4
2
7
3Out 2Out 1
2:4:
7: function check
2
BN
BK
BU
L+
L
3
L+
L
1
4
3
4
L+
L
1
2
3
5
4:2:5:
Out 1Out 2Out 3
6: Out 4
L+
L
1
4
6
7
3
7: function check
6
L+
L
A
E
T
O
L
E:P:S:
Out 1Out 2Out 3
G: Out 4C:T:
Out 5Out 6
O: function check
7
E:P:S:
Out 1Out 2Out 3
G: Out 4C:T:
Out 5Out 6
N:J:
Out 7Out 8
L+
L
A
E
J
O
L
O: function check
8
2
L
L+
4
1
3
4
L
L+
2
1
3
Fibre optics
167
Wiring diagrams
9
L
L+
BU
BK
BN
WH
L
L+
WH
BU
BK
BN
10
L+
2
4
1
3 LL
L+
4
2
1
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
1: mounting on DIN rail
2
1: mounting on DIN rail
3
1: mounting on DIN rail
4
1: mounting on DIN rail
Photoelectric sensors
168Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
5
15
36
LED
2
M12
x1
1
74
6044
3,2
1: mounting on DIN rail, 2: setting pushbuttons
6
15
M4
7
1811
M3
8
20
M4
1
1: glass lens
9
M6
30
1
1: glass lens
10
3530 2,
9
3
1 3
11
~110
1520
M4 2,
92
1
1: bendable
12
2012
M3
13
23
M4
16
14
26
M4
161
6
15
5
1
4,3
2012,3
3,4 6
1: Sensing surface
Fibre optics
169
Scale drawings / drawing no. – CAD download: www.ifm.com
16
35
M6
26
17
1520
M4
~110
2,9
1,6
1
1: bendable
18
20 3
19
3530
6
3
1
20
1: mounting on DIN rail
21
305
109
19LED
pot.
12,525
4,3
4,1
506M11x1
22
305
109
19LED
pot.
12,525
4,3
4,1
50M11x1
M12
x1
72
23
16
2849
pot.LED
740
4,3
3,5
51
21
6
43pot.LED
5
M11
x1
24
16
2849
pot.LED
740
51
2143
pot.LED
M12
x1
73
4,3
3,5
5
M11
x1
25
15
M4
26
2510 2,
53,
5
Photoelectric sensors
170Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
27
14
15
5
3
2,5
28
205 31
29
2515
M4
6
30
2510
3
6
31
14
166
3
3
32
14
16
6
3
3
33
25
M6
34
2510
3 4,5
35
14
16
6
4
3
36
15
3
1
6
37
3525
M6
38
25
10
3
7
Fibre optics
171
Scale drawings / drawing no. – CAD download: www.ifm.com
39
14
18
8
4
3
40
205
6
1
41
4525
M6 7
42
2510
3
7
Photoelectric sensors
172Product selectors and further information can be found at: www.ifm.com
Fibre optics
173
High-quality photoelectric sensors fordifferent applications.
Excellent price / performance ratio.
Easy adjustment via teach buttons or potentiometer.
Wide range of system components for easy and safe mounting.
Detection of transparent objects
Counting bottles and glasses or the reliable monitoring of film for tear can beperformed without problem using specially designed retro-reflective sensors.ifm electronic offers a retro-reflective sensor with a small switching hysteresis, inparticular for the detection of transparent objects. Due to the operating principle,retro-reflective sensors have the advantage that the light beam must pass the objectto be detected twice, weakening the light sufficiently to detect a transparent objectreliably. Precise adjustment is made by means of the teach buttons.
Contrast sensor
The O5 contrast sensor is specially suitable for detecting print marks and particularlyflat objects.
With its RGB transmitter LED the sensor detects even very small differences incontrast. During set-up it automatically selects the optimum transmitter colour fromthe colours red green blue (RGB) to ensure maximum energy difference of thereflected light. In addition, the teach method saves time and money. Pressing theteach buttons twice is enough for the sensor to be ready for operation.
High-resolution colour sensor
The new electronic colour sensor from ifm electronic detects the colour, packaging,label or imprint of objects at a high resolution. With the five selectable tolerancesteps, the colour sensor perfectly differentiates even the finest shades of colourfrom the background or other objects. The unit is set to the colour to be detectedby one push of the button. This saves time and money.
Optical fork and angle sensors
The optical fork and angle sensors are made from distortion-resistant diecast zincand feature a high switching frequency. Applications are in particular part monitor-ing in feeding technology and handling systems. Further application examples arebelt edge and double feed monitoring.
Sensitivity setting using the potentiometer and setting of light-on / dark-on modeusing the rotary switch are simple and time-saving. No complex adjustment isrequired because transmitter and receiver are already aligned towards each other.Due to the fine and precise red light beam which is constant across the entire forkwidth, out-of-balance monitoring of shafts can also be carried out.
Typical application forcontrast sensors:Counting of glassbottles.
The optical fork andangle sensors are
especially used forpart monitoring in
feeding technologyand handling systems.
Photoelectric sensors
174
Selection chart Page
Sensors for the detection of transparent objects 176
Sensors for colour detection 176
Photoelectric sensors 176
Optical fork sensors 176 - 177
Optical angle sensors 177 - 178
Prismatic reflector 178
Accessories O5 housing 178
Accessories for system components 178
Wiring diagrams 179
Scale drawings / drawing no. – CAD download: www.ifm.com 179
For specific systems
175
Sensors for the detection of transparent objects
Type Operating principle Range
[mm]
Typeof light
Spot Ø atmax.range[mm]
OutputH = light-onD = dark-on
Wiringdiagr.
no.
Draw-ingno.
Orderno.
Retro-reflective sensor · M8 connector · 10...30 DC · plastics · IP67 · Connector groups 4, 5, 6
Polarisation filter 0.2...1.5 m red 64 H/D PNP 1 1 OJ5086
Sensors for colour detection
Type Operating principle Measuringrange
Light spotdiameter
[mm]
Ub
[V]
Currentconsumption
[mA]
Sampling rate /switching frequency
[Hz]
Draw-ingno.
Orderno.
Colour sensor · M12 connector · 12...30 DC · metal · IP67 · Connector group 10
Colour sensor 12.5 mm 2 x 4 12...30 80 1000 2 OD5005
Colour sensor 60 mm 13 12...30 80 1000 2 OD5007
Colour sensor · M12 connector · 12...30 DC · metal · IP67 · Connector group —
Colour sensor 60 mm 13 12...30 80 300 2 OD5011
Photoelectric sensors
Type Dimensions
[mm]
Sensingrange[mm]
Material Ub
[V]
Protection f
[Hz]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector group —
M12 / L = 63 50 f high-grade st. steel 10...30 IP68 1600 100 3 JAC201
f = flush / nf = non flush
Optical fork sensors
Type Fork width(w)
[mm]
Fork depth(d)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 5 · Connector groups 1, 2, 3
10 17 0.3 10000 H/D PNP/NPN 10...35 4 OPU200
Photoelectric sensors
176Product selectors and further information can be found at: www.ifm.com
Type Fork width(w)
[mm]
Fork depth(d)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 3 · Connector groups 1, 2, 3
20 25 0.4 4000 H/D PNP 10...35 5 OPU201
50 55 0.5 4000 H/D PNP 10...35 6 OPU203
80 55 0.5 4000 H/D PNP 10...35 7 OPU204
120 60 0.8 2000 H/D PNP 10...35 8 OPU205
Optical fork sensor · Type OPU · M8 connector · metal · DC · Wiring diagram no. 4 · Connector groups 1, 3
20 25 0.4 4000 H/D NPN 10...35 5 OPU207
30 35 0.5 4000 H/D NPN 10...35 9 OPU208
50 55 0.5 4000 H/D NPN 10...35 6 OPU209
80 55 0.5 4000 H/D NPN 10...35 7 OPU210
120 60 0.8 2000 H/D NPN 10...35 8 OPU211
Optical angle sensors
Type Side length(x, y)
[mm]
Sensor width(z)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 3 · Connector groups 1, 2, 3
50 60 0.5 4000 H/D PNP 10...35 10 OPL200
80 100 0.7 4000 H/D PNP 10...35 11 OPL201
For specific systems
177You can find wiring diagrams and scale drawings from page 179
Type Side length(x, y)
[mm]
Sensor width(z)
[mm]
Smallestdetectableobject Ø
[mm]
Switchingfrequency
[Hz]
OutputH = light-onD = dark-on
Ub
[V]
Draw-ingno.
Orderno.
Optical angle sensor · Type OPL · M8 connector · metal · DC · Wiring diagram no. 4 · Connector groups 1, 3
50 60 0.5 4000 H/D NPN 10...35 10 OPL202
80 100 0.7 4000 H/D NPN 10...35 11 OPL203
Prismatic reflector
Type Description Orderno.
Prismatic reflector · 50 x 50 mm · rectangular · for red light and infrared light retro-reflective sensors · Housing materials: plastics E20744
Prismatic reflector · 50 x 50 mm · rectangular · for retro-reflective laser sensors and glass and film detection · Housing materials:plastics
E20722
Accessories O5 housing
Type Description Orderno.
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21085
Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087
Accessories for system components
Type Description Orderno.
mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938
mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940
Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951
Photoelectric sensors
178Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
1
L+
2
4
1
3 L2: Teach
2
L+
L
1
4
3
3
L+
L
1
4
3
4
L+
L
1
4
3
5
L+
L
1
4
3
L+
L
1
4
3
Scale drawings / drawing no. – CAD download: www.ifm.com
1
45
11
LED
8,2
1
24
3,2
3,1
LED
35
M8x1
8,83,1
1
9
LED
4
1
1: pushbutton
2
43
80
M12
x1
96
28
21 30
M5
M12
x1
3928
4053
69
M5
15
1
LED
LED
2
3
4
1: lens, 2: selection switch color tolerance, 3: programming selectorswitch, 4: teach button
3
M12
x1
174
M12
x1
5263
LED 4 x 90°
43
For specific systems
179
Scale drawings / drawing no. – CAD download: www.ifm.com
4
6M8x
1
10
4,34,5
4,5
12,5
10
W=
10
4
D = 17
4525
LED
12
22
10
1: output function switch , 2: potentiometer sensitivity
5
W=
20
4,34,5
4,5
D=25
5
50
M8x
1
10
LED
12,5 10
10
4,5
12 20,5
10
1: potentiometer sensitivity, 2: output function switch
6
12
2030
10
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
1010
W=
50
5
D = 55
80
1: potentiometer sensitivity, 2: output function switch
7
12
2030
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
10
1010
W=
80
5
D = 55
80
1: potentiometer sensitivity, 2: output function switch
8
37
5262
12
M8x
1
10
LED
4,3 5 20
2222
1212
W=
120
10
D = 60
90
1: potentiometer sensitivity, 2: output function switch
9
12
2030
M8x
1
10
LED
4,34,5
4,5
4,5
12,5
10
1010
W=
30
5
D = 35
60
1: potentiometer sensitivity, 2: output function switch
10
7510
Z60
Y=
5075
22,5
4,3
4,5
4,5
4250
X=50
M8x
1
42
50
10,5LED
17,5 25
,5 35,5
10
1: potentiometer sensitivity, 2: output function switch
Photoelectric sensors
180Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
11
10510
Z
100
Y=
8010
522
,5
4,3
4,5
4,5
7280
X=80
M8x
1
72
80
10,5LED
7280
4,3
6,7
17,5 25
,5 35,5
10
1: potentiometer sensitivity, 2: output function switch
For specific systems
181
Slim design with ranges up to 20 m for all protected areas.
Type 2 and type 4 safety light curtains to IEC 61496.
With SIL 2 & 3 to IEC 61508 and PL d & e to ISO 13849.
Can be installed in L shape without dead band.
Easy connection via the tried and tested M12 connector.
Safety light curtains and light grids
Safety light curtains and safety light grids are used where movements of machineparts represent a risk for people or goods.
The difference of the systems is the different resolution of the beams.
Depending on the risk, the protective function is classified into finger, hand or bodyprotection as well as primary guarding. When the light beam is interrupted, theprotective equipment ensures deactivation of the outputs. The machine is broughtinto the state defined as safe.
Tested safety
The safety light curtains and light grids from ifm electronic have been developedaccording to the current standards EN 61496, ISO 13849-1 and IEC 62061 andcertified by TÜV. They meet the requirements of type 2 with SILcl 2 and PL d as wellas type 4 with SILcl 3 and PL e.
Slim design or long range
The safety light curtains and safety light grids from ifm electronic are distinguishedby the very slim design (28 x 30 mm) and long ranges up to 20 m. Finger, hand andbody protection reliably ensure primary guarding or access prevention. ifm offersnew safety light grids for applications with especially long ranges. The new housingof our OY9 is slightly bigger and offers a range up to 60 m.
These light curtains are designed for protected area heights of 160 mm to 1510mm in intervals of 150 mm. A resolution (detection capacity) of 14, 20, 30, 40, 50or 90 mm can be selected. Light grids are offered with 2, 3 or 4 beams.
Safety light grids are also available as active / passive system.
Safety light curtainscan be used for fingeror hand protection.
Safe protection ofbodies on a robot cell.
Photoelectric sensors
182
Selection chart Page
Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m 184
Safety relays for safety light curtains 184
Wiring diagrams 185
Scale drawings / drawing no. – CAD download: www.ifm.com 185
Safety light curtains / light grids
183
Safety light curtains type 4, SIL 3, PL e, resolution 14 mm, protected area width up to 6 m
Type Sensorlength
[mm]
Resolution /detection capacity
[mm]
Protected areaheight
[mm]
Protected areawidth
[m]
Responsetime
[ms]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 1 · Connector group 12
213 14 160 0...3 / 1...6 4 24 1 OY001S
363 14 310 0...3 / 1...6 5.5 24 1 OY002S
513 14 460 0...3 / 1...6 7.5 24 1 OY003S
663 14 610 0...3 / 1...6 9 24 1 OY004S
813 14 760 0...3 / 1...6 11 24 1 OY005S
963 14 910 0...3 / 1...6 13 24 1 OY006S
1113 14 1060 0...3 / 1...6 14.5 24 1 OY007S
1263 14 1210 0...3 / 1...6 16.5 24 1 OY008S
1413 14 1360 0...3 / 1...6 18 24 1 OY009S
Safety relays for safety light curtains
Type Description Draw-ingno.
Orderno.
Safety relay · Muting relay · Housing for DIN rail mounting · For the connection of safety light curtains / safety light grids with OSSD · Safety category type 4 to IEC 61496 · for industrial applications
2 G2001S
Safety relay · Relay outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: · ISO 13849-1:2008
category 4 PL e · SIL 3 (IEC 61508) · Type IIIC (EN 574)3 G1501S
Safety relay · Relay outputs · can be set with and without timer function · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – ·
Complies with the requirements: · PL e (EN ISO 13849-1) · SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574)4 G1502S
Safety relay · Semi-conductor outputs · Housing for DIN rail mounting · For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control · – · Complies with the requirements: ·
SIL 3 (IEC 61508) · SILcl 3 (IEC 62061) · Type IIIC (EN 574) · PL e (EN ISO 13849-1)5 G1503S
Photoelectric sensors
184Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
1
5
4
3
2
6
7
1OSSD1
OSSD2
K1/K2/Restart
SEL_A
SEL_B
8
L+
L
Scale drawings / drawing no. – CAD download: www.ifm.com
1
40 2010
3
1010,528
28
5,5
40
10
2010
1,5
M5
14,5
30
28
T
M12x1
1129
,561
,5
L
R
T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2: LED 2 colours (yellow/blue), 3: LED 2 colours (red/green)
2
114,5
99
35
3
25
100
LED
35,5
105
1: Combicon connector with screw terminals, 2: mounting on DIN rail
4
114
LED
50 105
35,5
1: Rotary switch for switch-off delay, 2: Combicon connector withscrew terminals, 3: mounting on DIN rail
5
25
100
LED
105
35,5
1: Combicon connector with screw terminals, 2: mounting on DIN rail
Safety light curtains / light grids
185
2D vision sensor for object recognition.
3D sensor for assessment of distance, level or volume.
3D camera for spatial detection of scenes and objects.
Illumination units with high luminous power.
Tough, industrial housings.
2D vision sensor for object recognition
In automation technology visions sensors are an integral part of assembly andmanufacturing tasks as well as quality control and thus increase efficiency. They arecameras with application-specific evaluation, i.e. reliable electronic eyes at a lowcost and a high degree of integration. In a robust, industrially compatible housingthey combine lighting, lens, camera chip, evaluation and process connections forthe integration in the higher-level controller.
The application possibilities of efector dualis range from presence, position andorientation monitoring, via sorting and counting tasks to quality control.
3D sensor for assessment of distance, level or volume
efector pmd 3d is the first industrial 3D sensor that can assess objects in threedimensions at a glance.
Special feature: The time-of-flight measurement and evaluation are integrated onone chip. Each pixel of this chip matrix evaluates its distance to the object. Theimage of the object on the chip matrix and the respective distance valuescorrespond to a 3D image.
This technology enables the detailed assessment of the object’s or scene’s condi-tions by means of volume, distance or level detection in three dimensions. Typicalapplications are completeness checks and level monitoring in the food industry aswell as presence and dimension monitoring in conveying.
3D camera for detection in three dimensions of scenes and objects
The pmd 3d camera detects scenes and objects in their spatial dimensions at aglance. In contrast to laser scanners it does not require moving components and isthus robust and wear-free. The operating principle is the same as for the 3D sensor.
Besides the 3D distance image the camera provides a grey image of the scene. Thecombination of these images offers integrators the possibility to freely programapplication-specific tasks by means of a software development kit. This results inlow-cost application solutions in the areas of packaging, storage and materialshandling, airport logistics, collision avoidance, robotics, monitoring of space andpersons.
Set-up in just a fewsteps: The profes-sional and easy menuguidance allowsconfiguration of theefector dualis to yourapplication in just sixoperating steps.
Object recognition
186
Selection chart Page
Sensors for object recognition with PNP output function 188
Sensors for object recognition with NPN output function 188
Illumination units, spotlight 188
Illumination units, backlight 189
Software for 2D sensors 190
Fixing components for 2D sensors 190 - 191
Reflective tapes, diffusers and protective panes for 2D sensors 191
Sensors for 3D object recognition 191
Software for 3D sensors 191
Fixing components for 3D sensors 191 - 192
Connection cables for 2D and 3D sensors 192
Wiring diagrams 192 - 193
Scale drawings / drawing no. – CAD download: www.ifm.com 193 - 194
Object recognition
187
Sensors for object recognition with PNP output function
Type Operatingprinciple
Max.field of view size
[mm]
Resolution Detectionrate
[Hz]
Typeof light
Ambienttemperature
[°C]
Draw-ingno.
Orderno.
Type O2D2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 11, 12
CMOS image sensor B/W,VGA resolution 640 x 480
400 x 300 0.08 10 infrared -10...60 1 O2D224
CMOS image sensor B/W,VGA resolution 640 x 480
640 x 480 0.1 10 infrared -10...60 2 O2D220
CMOS image sensor B/W,VGA resolution 640 x 480
1280 x 960 0.3 10 infrared -10...60 2 O2D222
Sensors for object recognition with NPN output function
Type Operatingprinciple
Max.field of view size
[mm]
Resolution Detectionrate
[Hz]
Typeof light
Ambienttemperature
[°C]
Draw-ingno.
Orderno.
Type O2D2 · M12 plug, 8 poles M12 socket, 4 poles · metal · DC · Connector groups 11, 12
CMOS image sensor B/W,VGA resolution 640 x 480
400 x 300 0.08 10 infrared -10...60 1 O2D225
CMOS image sensor B/W,VGA resolution 640 x 480
640 x 480 0.1 10 infrared -10...60 2 O2D227
CMOS image sensor B/W,VGA resolution 640 x 480
1280 x 960 0.3 10 infrared -10...60 2 O2D229
Illumination units, spotlight
Type Dimensions
[mm]
Typeof light
Activeilluminated
area[mm]
I0normal light
intensity[mA]
I0high lightintensity
[mA]
Trigger Draw-ingno.
Orderno.
M12 connector · metal · DC · Wiring diagram no. 2 · Connector groups 7, 8
42 x 42 x 31 red – 180 90External; 24 V PNP to
IEC61131-13 O2D909
Object recognition
188Product selectors and further information can be found at: www.ifm.com
Illumination units, backlight
Type Dimensions
[mm]
Typeof light
Activeilluminated
area[mm]
I0normal light
intensity[mA]
I0high lightintensity
[mA]
Trigger Draw-ingno.
Orderno.
PUR cable 2 m · metal · DC · Wiring diagram no. 1
66.5 x 33.4 x 9.2 red 25 x 25 50 25External; 24 V PNP to
IEC61131-14 O2D900
66.5 x 33.4 x 9.2 infrared 25 x 25 50 25External; 24 V PNP to
IEC61131-14 O2D901
103 x 81 x 9.2 red 50 x 50 200 100External; 24 V PNP to
IEC61131-15 O2D902
103 x 81 x 9.2 infrared 50 x 50 200 100External; 24 V PNP to
IEC61131-15 O2D903
156 x 133 x 9.2 red 100 x 100 450 250External; 24 V PNP to
IEC61131-16 O2D904
156 x 133 x 9.2 infrared 100 x 100 450 250External; 24 V PNP to
IEC61131-16 O2D905
PUR cable 0.15 m · metal · DC · Wiring diagram no. 2 · Connector groups 7, 8
66.5 x 33.4 x 9.2 red 25 x 25 50 25External; 24 V PNP to
IEC61131-14 O2D910
66.5 x 33.4 x 9.2 infrared 25 x 25 50 25External; 24 V PNP to
IEC61131-14 O2D906
103 x 81 x 9.2 red 50 x 50 200 100External; 24 V PNP to
IEC61131-15 O2D911
103 x 81 x 9.2 infrared 50 x 50 200 100External; 24 V PNP to
IEC61131-15 O2D907
156 x 133 x 9.2 red 100 x 100 450 250External; 24 V PNP to
IEC61131-16 O2D912
156 x 133 x 9.2 infrared 100 x 100 450 250External; 24 V PNP to
IEC61131-16 O2D908
Object recognition
189You can find wiring diagrams and scale drawings from page 192
Software for 2D sensors
Type Description Orderno.
Operating software · O2D E2D200
Fixing components for 2D sensors
Type Description Orderno.
Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp:stainless steel
E2D110
Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp:stainless steel
E2D112
Mounting set · Backlight 25 x 25 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-gradestainless steel
E2D107
Mounting set · Backlight 50 x 50 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-gradestainless steel
E2D108
Mounting set · Backlight 100 x 100 mm · Clamp mounting · Housing materials: Mounting plate: stainless steel / clamp: high-gradestainless steel
E2D109
clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948
mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938
mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940
mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939
mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941
Cube · M10 · aluminium profile · Housing materials: diecast zinc E20951
Object recognition
190Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Cube · M12 · aluminium profile · Housing materials: diecast zinc E20952
Reflective tapes, diffusers and protective panes for 2D sensors
Type Description Orderno.
Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165
Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168
Sensors for 3D object recognition
Type Operatingprinciple
Resolution
[pixels]
Angle of aperture(horizontal x vertical)
[°]
Lighting Max.sampling
rate[Hz]
Ambienttemperature
[°C]
Draw-ingno.
Orderno.
PMD 3D sensor · Type O3D · M12 connector · metal · DC · Connector groups 11, 12
PMD 3D sensor 64 x 48 30° x 40° Infrared LED 20 -10...50 7 O3D200
PMD 3D camera · Type O3D · M12 connector · metal · DC · Connector groups 11, 12
PMD 3D camera 64 x 48 30° x 40° Infrared LED 20 -10...50 7 O3D201
Software for 3D sensors
Type Description Orderno.
Operating software for PMD 3D camera · O3D E3D201
Fixing components for 3D sensors
Type Description Orderno.
Mounting set · O3D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E3D103
Object recognition
191You can find wiring diagrams and scale drawings from page 192
Type Description Orderno.
mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939
Connection cables for 2D and 3D sensors
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898
Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housingmaterials: PUR
E11231
Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housingmaterials: PUR
E11232
Socket · ifm electronic · straight · Free from halogen · M12 connector · 5 m · Housing materials: PUR E11807
Socket · ifm electronic · straight · Free from halogen · M12 connector · 10 m · Housing materials: PUR E11311
Socket · ifm electronic · straight · Free from halogen · M12 connector · 2 m · Housing materials: PUR E11950
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112
Core colours
BK black
BN brown
BU blue
WH white
Wiring diagrams
1
L+
L
BN
BK
WH
BU
black: Trigger, white: Operating mode “high lightintensity”
Object recognition
192Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
2
L+
L
1
4
2
3
1: Trigger, 2: Operatingmode “high light intensity”
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M12x1
2
19
M12x1
42
57
8060
21
9,57
3 59
4,3
20,5
49,5
25,238,5
1
45
24,5
1: display, 2: Focus setting, 3: Centre of the lens axes
2
M12x1
2
19
M12x1
53,5
4,3
20,5
44
19,7
33
1
45
24,5
42
57
8060
21
9,57
3
1: display, 2: Focus setting, 3: Centre of the lens axes
3
31
4,3
14
30
LED
24M12 x1
54
LED
42
4
9,233,425
25
21,9
66,5
1934
3 LED
12,6
5
8150
50
103
90
68
3,3
4,3
3 LED
24,6
9,8
6
9,8133100
100 15
614
1
119
7,3
3 LED
3,3
6
631
Object recognition
193
Scale drawings / drawing no. – CAD download: www.ifm.com
7
95
60,540
4563
,8
16
75
137
120
123,
5
18
M12x1
M12x1
94
21,5
1: lens, 2: Illumination unit, 3: Display / buttons / LEDs, 4: Focus setting
Object recognition
194Product selectors and further information can be found at: www.ifm.com
Object recognition
195
Robust designs.
Industrial standard housings.
Cable entry for axial and radial use.
Designs with integrated bus interface.
Hollow shaft encoder for direct mounting on actuators.
Encoders
In many manufacturing and production processes encoders are indispensable asreliable transducers to ensure precise positioning. They convert rotary movementinto digital signals. Encoders use the wear-free photoelectric detection. A pulse discfirmly attached to the shaft ensures this detection.
Incremental encoders
Incremental encoders generate a precisely defined number of pulses per revolution.They are a measure of the angular or linear distance moved.
The coded disc is divided into separate segments which are alternately transparentor opaque. An LED emits a parallel-orientated light beam which illuminates all seg-ments of the coded disc. Photo elements receive the modulated light and convert itinto two sinusoidal signals. Digitalisation electronics amplify the signals and shapethem into square-wave pulse trains which are generated via the line driver in theoutput. The phase difference between signals A and B, which are phase-shifted by90 degrees, allows evaluation of the direction of rotation.
Absolute encoders
Absolute encoders provide an absolute numerical value for each angular position.This code value is available immediately after power is applied. This “absolute”value makes a reference procedure like the one required for the incrementalencoder unnecessary. Absolute encoders are used wherever angular positions haveto be allocated to a certain value and where the detection of the present position isabsolutely necessary in the case of a power failure.
Singleturn and multiturn
Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certainnumber of measuring steps. The measuring values are repeated after one revolu-tion. The maximum resolution is 8192. Multiturn encoders, however, do not onlydetect angular positions but also distinguish between multiple revolutions.
Linear measurementby means of a count-er: Rotary movementis converted intodigital signals.
Hollow shaft encoderfor direct mounting
on the axis.
Encoders
196
Selection chart Page
Incremental encoders with solid shaft 198
Connectors for encoders 198
Couplings for encoders 198
Fixing accessories for encoders 199
Scale drawings / drawing no. – CAD download: www.ifm.com 199
Encoders
197
Incremental encoders with solid shaft
Type Resolution Ub
[V]
f
[kHz]
Iload
[mA]
Shaft
[mm]
Ambienttemperature
[°C]
Cableentry
Draw-ingno.
Orderno.
Cable 2 m · Output function TTL output 20 mA
1000 5 300 20 6 -40...100 radial / axially 1 RU1024
2000 5 300 20 10 -40...100 radial / axially 2 RV1033
Cable 2 m · Output function HTL-output 50 mA, short-circuit protected < 1 min
500 10...30 300 50 10 -40...100 radial / axially 2 RV6016
Connectors for encoders
Type Description Orderno.
Socket · ifm electronic ifm 1001.2 · straight · wirable · M23 connector · Housing materials: brass plastic coated / PA 6.6 black E60124
Couplings for encoders
Type Description Orderno.
Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60065
Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 8 mm · Housing materials: aluminium E60120
Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 10 mm · Housing materials: aluminium E60066
Flexible coupling with clamp connection [KV] · Ø 10 mm / Ø 10 mm · Housing materials: aluminium E60067
Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60063
Encoders
198Product selectors and further information can be found at: www.ifm.com
Fixing accessories for encoders
Type Description Orderno.
Angle bracket · for encoders · for type RM, RMU, RN, RU · Housing materials: aluminium black anodised E60034
Angle bracket · for encoders · for type RMV, RV · Housing materials: aluminium black anodised E60035
Scale drawings / drawing no. – CAD download: www.ifm.com
1
4
3
650 58
3
10
h7
46,7±0,5
6
120°
421 2
1: reference mark, 2: M4 5 mm deep
2
10
36 58
f8
1
1,52046,7±0,5
106
48
120°
1 2
1: reference mark, 2: M3 5 mm deep
Encoders
199
Easy adjustment and parameter setting.
Primary voltage 24V dc or110 / 230V ac, wide-range input.
Programmable switching characteristics.
Standstill, overspeed, direction, slip andfrequency conversion, counter.
Switching relays and transistor outputs,scalable analogue output.
Evaluation systems
Although PLC applications in industrial automation are becoming more and moreversatile there are still numerous processes in practice which require decentralisedmonitoring.
For this ifm electronic offers a number of pulse evaluation systems in the productgroup “ecomat 200”. The application area ranges from simple standstill monitoringor blockage protection of a conveyor belt, maximum speed monitoring in windpower stations, slip monitoring of couplings through to direction monitoring, e.g.twin pumps with non-return valves.
Different units for rail mounting and compact designs in M18 and M30 metalhousings are available. They include microprocessor-controlled units for panemounting to display analogue signals, RPM, speeds, processing times, quantitiesand electronic preset counters for the detection of quantities or linearmeasurement.
All units are distinguished by a high reliability and easy handling. Independent ofthe PLC they indicate operating states or signal faults. This helps to reduce down-times and production loss.
ifm electronic offers the following evaluation systems:
– Speed monitors
– Standstill monitors
– Slip / synchronisation monitors
– Direction monitors
– Frequency-to-current converters
– Threshold relays
– Displays with frequency and analogue input
– Counters
– Switching amplifiers
Pulse evaluationsystems are used fordecentralised moni-toring of drives.
Machine cycles mustalso be monitored in
conveying.
Evaluation systems
200
Selection chart Page
Universal speed monitors 202
Universal speed monitors with sensor wire monitoring 202
Dual speed monitors 202
Slip monitors 202 - 203
Slip / synchronous monitors 203
Frequency-to-current converters 203
Standard speed monitors 203 - 204
Standstill monitors 204
Speed monitor with integrated sensor 204
Multifunctional displays for digital signals / frequency input 205
2-channel threshold relay for analogue standard signals 205
Multifunctional displays for analogue standard signals 205
Accessories 205 - 206
Wiring diagrams 206
Scale drawings / drawing no. – CAD download: www.ifm.com 206
Evaluation systems
201
Universal speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-1 · 2 switch points for monitoring overspeed/underspeed and acceptable range
230 AC (50...60 Hz) / 24 DC
1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2001
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003
Universal speed monitors with sensor wire monitoring
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-1N · 2 switch points for monitoring overspeed/underspeed and acceptable range
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 Namur 8.2 V 1...60000 0.1...1000 1 2 4 1 DD2103
Dual speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FR-2 · 1 switch point each for monitoring overspeed/underspeed and acceptable range
230 AC (50...60 Hz) / 24DC
2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2002
23...60 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)2 PNP / NPN / Namur 1...60000 0.1...1000 – 2 2 1 DD2006
Slip monitors
Type Ub
[V]
In-puts
Inputfunction
Setting range Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FS-1 · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range
230 AC (50...60 Hz) / 24 DC
1 PNP / NPN / Namurslip: 0.1...99.9 % rotational speed(frequency): 1...60000 pulses/min
(0.1...1000 Hz)2 2 1 DS2001
Evaluation systems
202Product selectors and further information can be found at: www.ifm.com
Type Ub
[V]
In-puts
Inputfunction
Setting range Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FS-1 · 1 switching output for slip monitoring; 1 switching output for overspeed/underspeed and acceptable range
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP / NPN / Namur
slip: 0.1...99.9 % rotational speed(frequency): 1...60000 pulses/min
(0.1...1000 Hz)2 2 1 DS2003
Slip / synchronous monitors
Type Ub
[V]
In-puts
Inputfunction
Setting range Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FS-2 · 2 switch points for slip/synchronous monitoring
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP / NPN / Namur
pulse differences: 1...999 reset time: 0.0...1000.0 s
2 2 1 DS2005
Frequency-to-current converters
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FA-1 · Conversion of pulse sequences into analogue standard signals
27 DC (typ. 24 DC) 1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2004
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP / NPN / Namur 0...600000 0...10000 2 1 1 1 DW2003
Standard speed monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring
230 AC (50...60 Hz) / 24 DC
1 PNP 5...5000 – – 1 – 2 DD0001
12 / 24 DC 1 PNP 5...5000 – – 1 – 2 DD0008
230 AC (50...60 Hz) / 24 DC
1 PNP 10...10000 – – 1 – 2 DD0022
Evaluation systems
203You can find wiring diagrams and scale drawings from page 206
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
D100 · evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP 5...5000 – – 1 1 2 DD0116
27...60 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP 5...5000 – – 1 1 2 DD0122
Standstill monitors
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
A300 · Evaluation of pulse sequences with regard to underspeed or missing pulse
230 AC (50...60 Hz) / 24 DC
1 PNP5...25 /
20...100– – 1 – 3 DA0001
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)1 PNP
5...25 /20...100
– – 1 1 3 DA0116
Speed monitor with integrated sensor
Type Dimensions
[mm]
Sensingrange
[mm]
Electricaldesign
Ub
[V]
Settingrange
[puls. / min.]
Start-updelay
[s]
Draw-ingno.
Orderno.
Output · Wiring diagram no. 1 · Connector groups 7, 8
M18 / L = 68 12 nf DC PNP 10...36 DC 3...6000 0...15 4 DI6001
Output · Wiring diagram no. 2
M30 / L = 81 10 f AC/DC 20...250 AC/DC 5...300 12 5 DI0001*
Output · Wiring diagram no. 3
M30 / L = 81 10 f DC PNP 10...36 DC 30...3000 15 5 DI5003
f = flush / nf = non flush
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.
Evaluation systems
204Product selectors and further information can be found at: www.ifm.com
Multifunctional displays for digital signals / frequency input
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
FX 360 · universal evaluation and display for all physical units which can be derived from pulse sequences
115/230 2 PNP / NPN – – 2 – – 6 DX2002
2-channel threshold relay for analogue standard signals
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
AL-3 · 2-channel analogue threshold relay for analogue standard signals
110...240 AC/DC (50...60 Hz) / 27 DC
(typ. 24 DC)2 2 x 0 / 4...20 mA – – 1 1 1 7 DL2003
Multifunctional displays for analogue standard signals
Type Ub
[V]
In-puts
Inputfunction
Settingrange
[puls. / min.]
Settingrange
[Hz]
Out-puts
analog
Out-puts
relays
Out-puts
transist.
Draw-ingno.
Orderno.
AX 360 · universal unit for the display of analogue standard signals (e.g. of pressure, temperature,or flow sensors)
115/230 20/4...20 mA /
0...10 V– – – – 2 6 DX2012
Accessories
Type Description Orderno.
Angle bracket · for type M18 · Housing materials: stainless steel E10736
Angle bracket · for type M30 · Housing materials: stainless steel E10737
Mounting clamp · Ø 20 mm - Ø 18 mm · with reducing bush · for type M18 · Housing materials: PBT E10076
Mounting clamp · Ø 34 mm - Ø 30 mm · with reducing bush · for type M30 · Housing materials: PBT E10077
Evaluation systems
205You can find wiring diagrams and scale drawings from page 206
Type Description Orderno.
Target wheel · Plastic disk with 8 screws as „target„ · Centered drill holes E89010
Core colours
BN brown
BU blue
BK black
Wiring diagrams
1
4
L
L+1
2
3
2: pulse output (the pulsesequence corresponds to the damping frequency), 4: switching output (adjustable)
2
BN
BU
L+L1
LN
3
BN
BK
BU
L+
L
Scale drawings / drawing no. – CAD download: www.ifm.com
1
45
78
1 4 652
19 20 21 22 23 24
13 14 15 16 17 18
3
97A1 8A2 10 11 12
120
35,5
1
1: mounting on DIN rail
2
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
3
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
4
M12
x1
77
5640
M18
x1
68
10
4
2421
1: 3 LED, 2: setting pushbutton
5
36
8167
58
5
M30
x1,5
9
18
2 LED
pot. 61
Evaluation systems
206Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
6
96
48
129 9
7
45
78
1 4 652
19 20 21 22 23 24
13 14 15 16 17 18
3
97 8 10 11 12
120
35,5
1
1: mounting on DIN rail
Evaluation systems
207
Evaluation systemsfor safety and EX
208
Evaluation systemsfor safety and EX
209
Safety
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
210 - 211212
212 - 213
EX
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
214 - 215216216
Multifunctional with relay outputs or semiconductor outputs.
Connection of electro-sensitive protective equipment.
e-stop and possibility to connect mechanical safety relays.
Two-hand control to EN 574 up to type IIIC, mechanical or electronic.
Certified to IEC 61508, ISO 13849-1, EN 574.
Safety relays for protection of operators and machinery
The EC machinery directive stipulates machinery should not present a risk (EN1050and EN ISO 14121-1). Since there is no zero risk, the aim is to achieve an acceptableresidual risk. If safety is dependent on control systems, these must be designed soas to minimise malfunction.
For this, ifm offers multifunctional safety relays. A major advantage of these units istheir flexibility. They perform monitoring tasks in safety applications in conjunctionwith different electro-sensitive protective equipment (ESPE).
On the safe side.
The relays are certified according to IEC 61508 SIL3, ISO 13849-1 PL e and EN 574up to type IIIC.
They have several multifunctional self-detecting and self-monitoring inputs as wellas short-circuit proof outputs. Concerning the type of output the user can selectbetween relay outputs and semiconductor outputs. Moreover, outputs with switch-off delay are available for specific applications.
It is possible to connect OSSD sensors, mechanical switches (e-stop) or implementtwo-hand applications with electronic or mechanical switches. When used as two-hand control devices, the requirements of type IIIB to EN574 can be met.
The units have a simultaneity monitoring of inputs. The offer the functions“automatic start” or “monitored start” and also allow monitoring of external relaycontacts.
Mechanical as well aselectronic safety sen-sors can be connectedto the safety relays.
Safety relays monitorcomplete series of
safety sensors.
Evaluation systemsfor safety and EX
210
Selection chart Page
Safety relays with relay outputs for fail-safe sensors 212
Safety relays with solid state outputs for fail-safe sensors 212
Safety relays for safety light curtains 212
Accessories 212
Scale drawings / drawing no. – CAD download: www.ifm.com 212 - 213
Safety
211
Safety relays with relay outputs for fail-safe sensors
Type Ub
[V]
Sensorinput /output
Safety-relatedoutput
Signalcontacts
(NC)
Feedbackcontacts
Responsetime[ms]
Offdelay[ms]
Draw-ingno.
Orderno.
24 DC (19.2...30 DC)
1/2 2 1 1...n < 180 – 1 G1501S
24 DC (19.2...30 DC)
1/2 5 3 1...n < 100 – 2 G1502S
Safety relays with solid state outputs for fail-safe sensors
Type Ub
[V]
Sensorinput /output
Safety-relatedoutput
Signalcontacts
(NC)
Feedbackcontacts
Responsetime[ms]
Offdelay[ms]
Draw-ingno.
Orderno.
24 DC (19.2...30 DC)
1/2 2 1 1...n < 100 – 3 G1503S
Safety relays for safety light curtains
Type Ub
[V]
Sensorinput /output
Safety-relatedoutput
Signalcontacts
(NC)
Feedbackcontacts
Responsetime[ms]
Offdelay[ms]
Draw-ingno.
Orderno.
24 DC (19.2...28.8 DC)
2/2 2 1 – < 20 – 4 G2001S
Accessories
Type Description Orderno.
Safety T-splitter · ifm electronic · T-piece for the pseudo-serial connection of fail-safe sensors · Housing materials: PUR E11569
Scale drawings / drawing no. – CAD download: www.ifm.com
1
25
100
LED
35,5
105
1: Combicon connector with screw terminals, 2: mounting on DIN rail
Evaluation systemsfor safety and EX
212Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
2
114
LED
50 105
35,5
1: Rotary switch for switch-off delay, 2: Combicon connector withscrew terminals, 3: mounting on DIN rail
3
25
100
LED
105
35,5
1: Combicon connector with screw terminals, 2: mounting on DIN rail
4
114,5
99
35
Safety
213
One or two-channel NAMUR switching amplifiers to IEC 60947-5-6.
Short-circuit and wire-break monitoring.
Programmable output function.
Relay or transistor outputs.
Easy mounting on DIN rail.
Hazardous gas and dust areas
ATEX stands for “atmosphère explosible“. The 94/9/EC and 1992/92/EC directivesare also commonly called “ATEX directives”.
You can find hazardous areas in many different industries. Examples are the foodand feedstuffs industry, woodworking, disposal and recycling operations and thetypical industries of chemistry, for example gas and oil-processing plants.
It is basically distinguished between “G” (gas, i.e. fog, steams) and “D” (dust).There are three unit categories each for gas and dust (1 - 3) that are analogous tothe gas zones 0 / 1 / 2 or dust zones 20 / 21 / 22. Example: Electrical apparatus ofthe 1G category may be operated in zone 0.
NAMUR switching amplifiers for hazardous areas
The one or two-channel NAMUR switching amplifiers evaluate the sensor signal andcontrol the output. They meet all requirements of the ATEX directives. Switchingamplifiers with relay and transistor output are available. The switching amplifiers aredesigned for the connection of NAMUR sensors to IEC 60947-5-6 and mechanicalswitches. They provide the voltage supply via an electrical separation for theintrinsically safe circuit.
Further features of the switching amplifiers are:
– Programmable effective direction of the output.
– Relay output designed as changeover contact.
– Short-circuit proof transistor outputs.
– The sensor cables are monitored for wire break and short circuit. In case of a�fault, the output is blocked or the relay is de-energised.
Typical hazardous gasareas are found in thechemical industry, forexample in gas andpetroleum processing.
Examples for thehazardous dust areas
are the food andfeedstuffs industries,but also disposal andrecycling operations.
Evaluation systemsfor safety and EX
214
Selection chart Page
Switching amplifiers with ATEX approval 216
Scale drawings / drawing no. – CAD download: www.ifm.com 216
EX
215
Switching amplifiers with ATEX approval
Type Ub
[V]
Power / currentconsumption
[VA] / [mA]
f
[Hz]
Ta
[°C]
Output Protection Draw-ingno.
Orderno.
230 1.0 / 10 -20...60 relay (1 changeover contact) IP20 1 N0031A
Scale drawings / drawing no. – CAD download: www.ifm.com
1
112
35,5
20
120
LED
1
1: Combicon plug with screw terminals (optional)
Evaluation systemsfor safety and EX
216Product selectors and further information can be found at: www.ifm.com
EX
217
No movings parts means highreliability and long life.
Guided wave radar, capacitive andhydrostatic level sensors.
Outputs for continuous or point levelmeasurement.
Integrated LED display for localindication of the current level.
Suitable for common industrial andprocess fluids.
Level sensors
In industrial applications where fluids or bulk material are used, storage tanks orsilos are used for processing or storing of media. Sensors are used to detect thelevels. Even critical process conditions such as emptying a hydraulic tank or theunintentional overspill of a tank are monitored by level sensors.
Advantages of electronic sensors
Deposits and wear and tear often lead to failures in particular if mechanicalswitches are in contact with the medium. The electronic ifm sensors however cando without any mechanical components. This makes the sensors especially robustand reliable.
Another advantage of electronic sensors is the local indication of the level or theeasy setting of the switching threshold simply by pressing a button.
Measurement technique
For continuous level measurement the level is detected continuously, convertedinto an electrical signal and indicated. Depending on the type the units have freelyprogrammable switching outputs or an analogue output for further processing.
Continuous level sensors from ifm electronic use three different physical measuringprinciples:
For capacitive measurement the probe and the tank form an electrical capacitor.The capacity changes with the level and is converted into a level measurement by amicroprocessor.
For hydrostatic level measurement a measuring cell detects the hydrostatic pressureof the material. Here the pressure change is a measure for the level.
The efector gwr level sensor operates on the principle of guided wave radar.Electromagnetic pulses are transmitted by the sensor head and guided along theprobe. If the microwave pulse hits the medium to be detected, it is reflected andthe time of flight is evaluated by the sensor.
Measurement inthe medium:Probe sensors will bedirectly immersed inthe medium to bemonitored.
For special applica-tions: Capacitiveprobe sensor for
monitoring oils andcoolants.
Level sensors
218
Selection chart Page
Electronic level sensors for oils and coolants, approval to the German Federal Water Act (WHG), section 19 220
Electronic level sensors for oils and coolants 220 - 221
Variable level sensors, guided wave radar 221
Compact sensors for level and temperature monitoring 221 - 222
Compact sensors for level and leakage monitoring 222
Sensors for hydrostatic level monitoring 222
Point level sensors for oils and lubricants 222 - 223
Accessories for level sensors LK, LT, LL, LI 223 - 224
Accessories for level sensors LR 224 - 225
Accessories for level sensors PA, PG, PI, PN, PS, PY 225 - 226
Wiring diagrams 226
Scale drawings / drawing no. – CAD download: www.ifm.com 227
Level sensors
219
Electronic level sensors for oils and coolants, approval to the German Federal Water Act(WHG), section 19
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable (OUT1) 1 x normally closed (OUT-OP, overflow output) · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
264 195 53 / 15 12...30 0...35 0...65 200 1 LK1222
472 390 53 / 30 12...30 0...35 0...65 200 1 LK1223
728 585 102 / 40 12...30 0...35 0...65 200 1 LK1224
Electronic level sensors for oils and coolants
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 1 x analogue 4...20 mA / 0...10 V (OUT2); 1 x normally open / closed programmable (OUT-OP) · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
264 195 53 / 15 18...300...35 (LK3122 +E43100: 0...65)
0...70 200 2 LK3122
472 390 53 / 30 18...300...35 (LK3123 +E43101: 0...60)
0...70 200 2 LK3123
728 585 102 / 40 18...300...35 (LK3124 +E43102: 0...55)
0...70 200 2 LK3124
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8
264 195 53 / 15 18...300...35 (LK1022 +E43100: 0...65)
0...70 200 2 LK1022
472 390 53 / 30 18...300...35 (LK1023 +E43101: 0...60)
0...70 200 2 LK1023
728 585 102 / 40 18...300...35 (LK1024 +E43102: 0...55)
0...70 200 2 LK1024
M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector group —
264 195 53 / 15 18...300...35 (LK8122 +E43100: 0...65)
0...70 200 2 LK8122
472 390 53 / 30 18...300...35 (LK8123 +E43101: 0...60)
0...70 200 2 LK8123
Level sensors
220Product selectors and further information can be found at: www.ifm.com
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP · Wiring diagram no. 4 · Connector group —
728 585 102 / 40 18...300...35 (LK8124 +E43102: 0...55)
0...70 200 2 LK8124
Variable level sensors, guided wave radar
Type Processconnection
Probe length
[mm]
Activezone
[mm]
Inactive zone
[mm]
Ub
[V]
Mediumtemperature
[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DCPNP · Wiring diagram no. 5 · Connector groups 7, 8
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 3 LR3000
¾„NPT 150...1600 L - 50 40/10 18...30 0...80 200 4 LR3300
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 3 LR7000
¾"NPT 150...1600 L - 50 40/10 18...30 0...80 200 4 LR7300
M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector group —
G¾ A 100...1600HIGH: L - 40;LOW: L - 60
HIGH: 30 / 10;LOW: 30 / 30
18...30 0...80 *** 200 5 LR8000
¾"NPT 150...1600 L - 50 – 18...30 0...80 200 6 LR8300
Compact sensors for level and temperature monitoring
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normallyopen / closed programmable (temperature) · DC PNP · Wiring diagram no. 7 · Connector group —
264 195 53 / 15 18...30 – 0...70 200 7 LT8022
472 390 53 / 30 18...30 – 0...70 200 7 LT8023
Level sensors
221You can find wiring diagrams and scale drawings from page 226
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normallyopen / closed programmable (temperature) · DC PNP · Wiring diagram no. 7 · Connector group —
728 585 102 / 40 18...30 – 0...70 200 7 LT8024
Compact sensors for level and leakage monitoring
Type Probe length
[mm]
Activezone
[mm]
Inactivezone
[mm]
Ub
[V]
Mediumtemperature
water[°C]
Mediumtemperature
oil[°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector (according to EN 61076-2-101) · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 8 · Connector group —
264 195 53 / 15 18...300...35 (LL8022 +E43100: 0...65)
0...70 200 7 LL8022
472 390 53 / 30 18...300...35 (LL8023 +E43101: 0...60)
0...70 200 7 LL8023
728 585 102 / 40 18...300...35 (LL8024 +E43102: 0...55)
0...70 200 7 LL8024
Sensors for hydrostatic level monitoring
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
Output 4...20 mA analogue · Wiring diagram no. 9
– – 0...0.25 2 2.4 10...30 8 PS3208
– – 0...0.6 4 4.8 10...30 8 PS3407
Point level sensors for oils and lubricants
Type Probe length
[mm]
Output Ub
[V]
Mediumtemperature
water [°C]
Mediumtemperature
oil [°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
132 normally closed 10...36 0...35 0...65 200 9 LI2141
273 normally closed 10...36 0...35 0...65 200 9 LI2142
Level sensors
222Product selectors and further information can be found at: www.ifm.com
Type Probe length
[mm]
Output Ub
[V]
Mediumtemperature
water [°C]
Mediumtemperature
oil [°C]
Iload
[mA]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
481 normally closed 10...36 0...35 0...65 200 9 LI2143
M12 connector · Output function · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
132normally open / closed
programmable10...36
0...35 (LI5141 +E43103: 0...65)
0...65 200 9 LI5141
273normally open / closed
programmable10...36
0...35 (LI5142 +E43100: 0...65)
0...65 200 9 LI5142
481normally open / closed
programmable10...36
0...35 (LI5143 +E43101: 0...60)
0...65 200 9 LI5143
737normally open / closed
programmable10...36
0...35 (LI5144 +E43102: 0...55)
0...65 200 9 LI5144
Accessories for level sensors LK, LT, LL, LI
Type Description Orderno.
Flange plate · 54-52X52 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut:stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit
E43007
Flange plate · 65-80 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainlesssteel / Spacer: brass / rubber ring: FPM
E43006
Flange plate · 73-90 D16 · for capacitive level sensors LK, LI, LT, LL · according to DIN 24557 · Housing materials: aluminiumanodised / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: NBR
E43001
Mounting adapter · G ¾ D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit
E43003
Mounting adapter · G ¾ D16 · for capacitive level sensors LI · Housing materials: brass nickel-plated / TPE / sealing: Viton E43019
Mounting adapter · G ¾ D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43008
Mounting adapter · ¾" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM
E43012
Level sensors
223You can find wiring diagrams and scale drawings from page 226
Type Description Orderno.
Mounting adapter · G 1 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: Tesnit
E43004
Mounting adapter · G 1 D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43009
Mounting adapter · 1" NPT D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel / Spacer: brass / rubber ring: FPM
E43013
Climatic tube · Length: 264 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43100
Climatic tube · Length: 472 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43101
Climatic tube · Length: 728 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43102
Mounting clamp · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP E43000
Mounting set · Ø 16 mm · for capacitive level sensors LK, LI, LT, LL · Housing materials: PP / Metal parts: steel galvanised E43016
Protective cover · for LK / LL / LR / LT sensors · Housing materials: PP E43910
Accessories for level sensors LR
Type Description Orderno.
Flange plate · 65-80 / G ¾ · for level sensors LR · Housing materials: flange: stainless steel E43202
Flange plate · 73-90 / G ¾ · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing: NBR E43201
Flange plate · 73-90 / ¾" NPT · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing:NBR
E43206
Probe · Probe length: 240 mm · for level sensors LR · Housing materials: stainless steel E43203
Level sensors
224Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Probe · Probe length: 450 mm · for level sensors LR · Housing materials: stainless steel E43204
Probe · Probe length: 700 mm · for level sensors LR · Housing materials: stainless steel E43205
Probe · Probe length: 1000 mm · for level sensors LR · Housing materials: stainless steel E43207
Probe · Probe length: 1200 mm · for level sensors LR · Housing materials: stainless steel E43208
Probe · Probe length: 1400 mm · for level sensors LR · Housing materials: stainless steel E43209
Probe · Probe length: 1600 mm · for level sensors LR · Housing materials: stainless steel E43210
Accessories for level sensors PA, PG, PI, PN, PS, PY
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / Viton / ventilation strip: Teflon film 0.32 mm / O-ring: Viton
E30101
Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM
E30104
Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399
Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400
Level sensors
225You can find wiring diagrams and scale drawings from page 226
Type Description Orderno.
Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401
Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402
Core colours
BN brown
GY grey
WH white
Wiring diagrams
1
L
L+
3 BU
4 BK
2 WH
1 BN
Out-OPOut 1
2:4:
2
L+
L3 BU
4 BK
2 WH
1 BN
Out-OPOut 2
4:2:
3
2
L
L+
4
1
3Out 1Out 2
4:2:
4
Out-OP / Out 4
3
4
2
5
6
Out 1
Out 3
L+1
n.c.7
Out 2
L
5
L+
LOUT1OUT2
4:2:
4
2
1
3
6
L+
L
n.c.
Out 4
Out 1
Out 2
1
2
4
6
7
3
Out 35
7
Out 4
3
4
2
5
6
Out 1
Out 3
L+1
n.c.7
Out 2
L
8
Out-OP
3
4
2
5
6
Out 1
Out 3
L+1
n.c.7
Out 2
L
9
BN
GY
WH
L+
L
10
L+
L
1
4
3
Level sensors
226Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
I1L
16
50
518
AI2
1 2
3
30,5
64
M12
x1
1: 7-segment LED display, 2: Programming buttons, 3: Housing connection with cable lug for cable 1.5 - 2.5 mm²
2
30,5
64
M12
x1
4 3I1L
16
50
57A
I2
32
1
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4:Housing connection (flat-pin connector 6.3 mm following DIN 46244)
3
30
63
M12
x1
G 43
8 6
32
I1
L
50
57A
I2
32
1
7887
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing
4
I1
L
50
57A
I2
32
1
6787
30
63
M12
x1
"NPT8
43
6
32
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons
5
30
63
M12
x1
G 43
8 6
32
I1
L
50
57A
I2
32
1
7887
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming buttons, 4: sealing
6
30
63
M12
x1
"NPT8
43
6
32
I1
L
50
57A
I2
32
1
6787
1: 4-digit alphanumeric display, 2: LEDs (display unit / switchingstatus), 3: Programming buttons
Level sensors
227
Scale drawings / drawing no. – CAD download: www.ifm.com
7
30,5
64
M12
x1
5
4 3I1L
16
50
57A
I2
32
1
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4: Housing connection (flat-pin connector 6.3 mm following DIN46244), 5: Position of the temperature measuring element
8
100
27
9
L
16
53
M12
x1
LED
21,3
1
16,6
A
1: Programming buttons
Level sensors
228Product selectors and further information can be found at: www.ifm.com
Level sensors
229
For liquids and gases.
Special versions for food applications and hazardous areas.
Optional fittings for variable process connection.
Flow monitoring also for aggressive media.
Flow sensors
In almost all fields of process and plant engineering liquids or gases are used forcoolant and lubricant supply of machines and units, ventilation of installations andbuildings and the processing of products. In case of no flow of these mediaconsiderable damage and downtime may result. Thus it is very important to monitorthese media. In modern installations electronic flow monitors are used for thispurpose. They work without wear and tear and without mechanical components.This guarantees reliable monitoring even in case of difficult media over a longperiod.
Operating principle
Electronic flow sensors from ifm electronic operate with different measurementtechniques. They meet all requirements from a simple monitoring function to theexact detection of flow quantities.
Harmonised operating menus ensure that operators who use different flow sensorscan quickly and precisely carry out settings on the sensors. Some flow sensorsfeature an integrated temperature monitor which makes an additional measuringpoint unnecessary. This enables to control processes in the optimum operatingstatus especially with regard to energy savings.
Analogue, binary and pulse outputs offer various possibilities to process themeasured data. Due to the flexible programming by means of pushbuttons theflow sensors can be adapted to different conditions. The sensors are mounted viaadapters.
Monitoring very smallflow rates: Flow moni-tor with flow adapter.
Optimisedconsumption ofcompressed air.
Flow sensors
230
Selection chart Page
Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM) 232
Magnetic-inductive flow sensors (sealing material FKM) 232
Compact housings for adapters for flow monitoring 233
Compact housings for adapters for flow monitoring, titanium sensor tip 233
Compact designs for adapter with flow and temperature monitoring 234
Compact housings for adapters with ATEX approval group II, category 3D / 3G 234
Mechatronic flow sensors for liquids 234
Flow sensors for connection to control monitors, industrial applications 235
Flow sensors for connection to control monitors, industrial applications, titanium housing 235
Control monitors for industrial applications 235 - 236
Flow sensors for connection to control monitors with ATEX approval 236
Control monitors with ATEX approval 237
Air flow monitors 237
Compressed air meters 237
Compressed air meter for special gases 238
Inline sensor for small dosing quantities of water and aqueous solutions 238
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 238 - 239
Accessories for flow sensors and control monitors 239 - 240
Accessories for volumetric flow sensors 240 - 241
Grounding clamps for magnetic-inductive volumetric flow sensors 241
Wiring diagrams 241 - 242
Scale drawings / drawing no. – CAD download: www.ifm.com 243 - 246
Flow sensors
231
Magnetic-inductive flow sensors with integrated temperature measurement (sealing materialFKM)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue(4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8
G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 SM6000
Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 7, 8
G½ 0.1...25.00 -10...70 16 < 0.150 20...30 1 SM6004
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8
G¾ 0.5...50.0 -10...70 16 < 0.150 19...30 2 SM7000
Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 7, 8
G¾ 0.2...50.0 -10...70 16 < 0.150 20...30 2 SM7004
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8
G1 0.7...100.0 -10...70 16 < 0.150 19...30 3 SM8000
Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 7, 8
G1 0.2...100.0 -10...70 16 < 0.150 20...30 3 SM8004
Magnetic-inductive flow sensors (sealing material FKM)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 3 · Connector groups 7, 8
G½ 0...25 -10...70 16 < 0.150 19...30 4 SM6050
G¾ 0...50 -10...70 16 < 0.150 19...30 5 SM7050
G1 0...100 -10...70 16 < 0.150 19...30 6 SM8050
Flow sensors
232Product selectors and further information can be found at: www.ifm.com
Compact housings for adapters for flow monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 4 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI5000
M12 connector · Output function · DC NPN · Wiring diagram no. 5 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI5001
M12 connector · Output function 2 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5002
M12 connector · Output function 2 x normally open / closed programmable · DC NPN · Wiring diagram no. 7 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5003
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 3 · Connector groups 7, 8
3...300 / - 3...100 -25...80 / - 300 1...10 19...36 8 SI5004
M12 connector · Output function · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5010
M12 connector · Output function · DC NPN · Wiring diagram no. 9 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5011
Compact housings for adapters for flow monitoring, titanium sensor tip
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 8 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 8 SI5100
Flow sensors
233You can find wiring diagrams and scale drawings from page 241
Compact designs for adapter with flow and temperature monitoring
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 6 · Connector groups 7, 8
3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 8 SI5007
Compact housings for adapters with ATEX approval group II, category 3D / 3G
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 4 · Connector group —
3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 7 SI500A
Mechatronic flow sensors for liquids
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 10 · Connector groups 7, 8
Rp ¾ 1...15 0...85 25 < 0.01 24 9 SBY332
Rp ½ 2...20 0...85 25 < 0.01 24 10 SBY323
Rp ¾ 1...25 0...85 25 < 0.01 24 9 SBY333
Rp ¾ 2...50 0...85 25 < 0.01 24 9 SBY334
Rp 1 5...100 0...85 25 < 0.01 24 11 SBY346
Rp 1½ 20...200 0...85 25 < 0.01 24 12 SBY357
Flow sensors
234Product selectors and further information can be found at: www.ifm.com
Flow sensors for connection to control monitors, industrial applications
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime[s]
Max. T0gradient[K/min]
Pressurerating[bar]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 11 · Connector group 10
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 30 30 13 SF6200
M12 connector · Wiring diagram no. 11 · Connector group —
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 14 SF5200
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 30 15 SF5201
Cable 6 m · Wiring diagram no. 12
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 16 SF5350
3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 16 SF5300
Flow sensors for connection to control monitors, industrial applications, titanium housing
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime[s]
Max. T0gradient[K/min]
Pressurerating[bar]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 11 · Connector group —
3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 14 SF5700
Control monitors for industrial applications
Type Ub /Tolerance
[V] / [%]
Currentconsumpt.
[mA]
Powerconsumpt.
[VA]
Power-ondelaytime[s]
Outputwhen flow is
present
Outputwhen
temperature is exceeded
Outputin case of
wire break
Draw-ingno.
Orderno.
Combicon connector · Wiring diagram no. 17
90...240 AC/ -5 /+10
– 4 10...80 relay energised relay energised relay de-energised 17 SN0150*
Flow sensors
235You can find wiring diagrams and scale drawings from page 241
Type Ub /Tolerance
[V] / [%]
Currentconsumpt.
[mA]
Powerconsumpt.
[VA]
Power-ondelaytime[s]
Outputwhen flow is
present
Outputwhen
temperature is exceeded
Outputin case of
wire break
Draw-ingno.
Orderno.
Combicon connector · Wiring diagram no. 18
90...240 AC/ -5 /+10
– 4 10...80 relay energised – relay de-energised 17 SN0151*
Combicon connector · Wiring diagram no. 19
24 DC / +10/ -20
90 – 10...80 relay energised relay energised relay de-energised 17 SR0150*
M12 connector · Wiring diagram no. 4 · Connector groups 7, 8
19...36 DC 70 – 10no / nc
programmable– – 18 SR5900
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, 1 =, Flow monitoring, 2 =, Wire break monitoring, 3 =, Temperature monitoring, 4 =, Power-on delay time, 5 =, Selection liquid / gas, ≤ 5 A (fast acting). Recommendation: check the unit for reliable functionafter a short circuit.
Flow sensors for connection to control monitors with ATEX approval
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime[s]
Max. T0gradient[K/min]
Pressurerating[bar]
Draw-ingno.
Orderno.
Cable 6 m · Wiring diagram no. 13
3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 19 SF311A
3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 20 SF121A
M12 connector · Wiring diagram no. 14 · Connector group —
3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 21 SF320A
Flow sensors
236Product selectors and further information can be found at: www.ifm.com
Control monitors with ATEX approval
Type Ub /Tolerance
[V] / [%]
Currentconsumpt.
[mA]
Powerconsumpt.
[VA]
Power-ondelaytime[s]
Outputwhen flow is
present
Outputwhen
temperature is exceeded
Outputin case of
wire break
Draw-ingno.
Orderno.
15 terminals...2.5 mm²
230 AC / ± 10
– 5 30 relay energised – relay de-energised 22 SN2301*
24 DC / ± 10
125 – 30 relay energised – relay de-energised 22 SR2301*
* Note for AC and AC/DC units
Miniature fuse to IEC60127-2 sheet 1, 1, Flow monitoring, 2, Wire break monitoring, ≤ 5 A (fast acting), Place the fuse outsidethe hazardous area. . Recommendation: check the unit for reliable function after a short circuit.
Air flow monitors
Type Setting rangeliquids / gases
[cm/s]
Greatestsensitivity
[cm/s]
Mediumtemperature
[°C]
Responsetime[s]
Ub / tolerance
[V] / [%]
Draw-ingno.
Orderno.
Cable 2 m · Wiring diagram no. 15
100...1000 100...400 -10...50 3...60 24 DC ± 25 % 23 SL5101
Compressed air meters
Type Processconnection
Setting range
[Nm3/h]
Accuracy withinmeasuring range
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 20 · Connector groups 7, 8
G¼ (DN8) 0.14...15.00A): ± (3% MW + 0.3%MEW) / B): ± (6% MW
+ 0.6% MEW) *16 < 0.1 19...30 24 SD5000
R½ (DN15) 0.7...75.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW
+ 0.6% MEW) *16 < 0.1 19...30 25 SD6000
R1 (DN25) 2.0...225.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW
+ 0.6% MEW) *16 < 0.1 19...30 26 SD8000
R1½ (DN40) 3.5...410.0A): ± (3% MW + 0.3%MEW) / B): ± (6% MW
+ 0.6% MEW) *16 < 0.1 19...30 27 SD9000
R2 (DN50) 6...700A): ± (3% MW + 0.3%MEW) / B): ± (6% MW
+ 0.6% MEW) *16 < 0.1 19...30 28 SD2000
Flow sensors
237You can find wiring diagrams and scale drawings from page 241
Compressed air meter for special gases
Type Processconnection
Setting range
[Nm3/h]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · Wiring diagram no. 20 · Connector groups 7, 8
G¼ (DN8)Ar: 0.08...24.54 / CO2: 0.047
(0.04)...14.38 / N2: 0.05(0.06)...14.94
0...60 16 < 0.1 19...30 24 SD5100
R½ (DN15)Ar: 0.39 (0.4)...118.2 / CO2:0.24 (0.2)...71.7 / N2: 0.24
(0.2)...73.0 0...60 16 < 0.1 19...30 25 SD6100
Inline sensor for small dosing quantities of water and aqueous solutions
Type Processconnection
Measuring range
[ml/min]
Display range
[ml/min]
Pressurerating[bar]
Mediumtemp.[°C]
Draw-ingno.
Orderno.
M12 connector · Wiring diagram no. 20 · Connector groups 7, 8
G1/8 1...200 0...240 10 0...60 29 SQ0500
Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils)
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output 2 x normally open / closed programmable · Wiring diagram no. 16 · Connector groups 7, 8
G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 30 SU7200
G1 0.2...100.0 -10...80 16 < 0.250 19...30 31 SU8200
Output OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA/ 0...10 V, scaleable) · Wiring diagram no. 1 · Connector groups 7, 8
G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 30 SU7000
G1 0.2...100.0 -10...80 16 < 0.250 19...30 31 SU8000
G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 32 SU9000
Flow sensors
238Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Measuringrange
[l/min]
Mediumtemperature
[°C]
Pressurerating
[bar]
Responsetime
[s]
Ub
[V]
Draw-ingno.
Orderno.
Output 2 x analogue (4...20 mA scalable) · Wiring diagram no. 2 · Connector groups 7, 8
G1¼ 0.0...200.0 -10...80 16 < 0.250 19...30 32 SU9004
Accessories for flow sensors and control monitors
Type Description Orderno.
Progressive ring T-piece DIN 2353 · QL 18-18-18 · for sensors and adapters with process connection M26 x 1.5 · Recommendation:precision steel pipes 18 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571
E40078
Progressive ring T-piece DIN 2353 · QL 22-18-22 · for sensors and adapters with process connection M26 x 1.5 · Recommendation:precision steel pipes 22 x 1.5 to DIN 2391/ISO 3304 · Housing materials: stainless steel 316Ti / 1.4571
E40079
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128
Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A
E40104
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404
E40101
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404
E40099
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097
Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials:stainless steel 316L / 1.4404
E40129
Flow sensors
239You can find wiring diagrams and scale drawings from page 241
Type Description Orderno.
Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials:titanium
E40130
Protective cover · for flow sensors type SI5xxx, SI6xxx, SR59xx · Housing materials: PP uncoloured E40203
Accessories for volumetric flow sensors
Type Description Orderno.
Adapter · G ½ - R ½ · R ½ · for flow monitor type SM6 · flat seal · Housing materials: stainless steel 316Ti / 1.4571 · Pack quantity: 2 E40199
Adapter · G ½ - G ¾ · G ½ · for flow monitor type SM6 · flat seal · Housing materials: high-grade stainless steel E40189
Adapter · G ¾ - R ½ · for flow monitor type SM7 / SU7 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40178
Adapter · G 1 - R ½ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40179
Adapter · G 1 - R ¾ · for flow monitor type SM8 / SU8 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40180
Adapter · G ¾ I - R½ · for flow monitor type SM7 / SU7 · Housing materials: brass · Pack quantity: 2 E40151
Adapter · G 1 - R½ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40152
Adapter · G 1 - R¾ · for flow monitor type SM8 / SU8 · Housing materials: brass · Pack quantity: 2 E40153
Adapter · G 1¼ - R 1 · for flow monitor type SU9 · Housing materials: high-grade stainless steel · Pack quantity: 2 E40205
Adapter · G ½ - G ½ · for flow monitor type SM6 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40213
Adapter · G ¾ - G ½ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40214
Flow sensors
240Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Adapter · G 1 - G ¾ · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40215
Adapter · G ¾ - G ¾ · for flow monitor type SM7 / SU7 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40216
Adapter · G 1 - G 1 · for flow monitor type SM8 / SU8 · Housing materials: stainless steel 316L / 1.4404 · Pack quantity: 2 E40217
Grounding clamps for magnetic-inductive volumetric flow sensors
Type Description Orderno.
Grounding clamp G½ · for flow monitor type SM6 · Housing materials: stainless steel E40196
Grounding clamp G ¾ · for flow monitor type SM7 · Housing materials: stainless steel E40197
Grounding clamp G 1 · for flow monitor type SM8 · Housing materials: stainless steel E40198
Core colours
BN brown
BU blue
BK black
WH white
GY grey
Wiring diagrams
1
4
1
3
2 OUT2/InD
L+
L
BN
BU
OUT1
WH
BK
2
L+
LOUT1OUT2
4:2:
4
2
1
3
3
L+
L3
2
4
1
n.c.
n.c. = not connected
4
L+
L
1
4
3
5
L+
L
1
4
3
6
L
L+
3
2
4
1
S2 S1
7
L
L+
3
2
4
1
S1 S2
8
P
L+1
4
3
2
L
P = programming wire (forremote adjustment)
9
P
L+1
4
3
2
L
P = programming wire (forremote adjustment)
10
3
L+
L
1
4
11
2 WH
1 BN
4 BK
3 BU
5 GY
Flow sensors
241
Wiring diagrams
12
BU
BK
BN
WH
GY
13
BN
WH
BK
BU
1
2
3
7
8
9
GY
VS2000 Exi
14
1
2
3
7
8
9
VS2000 Exi
1 BN
2 WH
4 BK
3 BU
5 GY
15
BN
WH
BU
BKL+
L
16
2
L
L+
4
1
3Out 1Out 2
4:2:
17
ACL
N
12
11
10
9
8
7
6
5
4
2
1
19
18
17
5
4
1
3
2
GY
BK
BN
BU
WH
20
21
22
23
24
1
2
35
4
1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas
18
ACL
N
12
11
10
9
8
7
6
5
4
2
1
19
18
17
5
4
1
3
2
GY
BK
BN
BU
WH
20
21
22
23
24
1
2
35
4
1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas,Note: miniature fuse to IEC60127-2 sheet 1,, ≤ 5 A (fast acting)
19
12
11
10
9
8
7
6
5
4
2
1
19
18
17
5
4
1
3
2
GY
BK
BN
BU
WH
20
21
22
23
24
1
2
35
4
DCL+L
1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas
20
L+
LOut 2Out 1
2:4: 3
4
2
1
L
L+
Out 2Out 1
2:4: 3
4
2
1
Flow sensors
242Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
1
11073
M12 x1
16
G G2
1
21
M12 x1
54
2
G4
3
G4
3
11073
M12 x1
19
M12 x1
54
3
G1
G1
11073
M12 x1
19
M12 x1
54
4
11073
M12 x1
16
G G2
1
21
M12 x1
54
5
G4
3
G4
3
11073
M12 x1
19
M12 x1
54
6
G1
G1
11073
M12 x1
19
M12 x1
54
7
22
1 2
3
113
60 65
14
7,7
45
50
27
63
M12
x1
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
8
22
1 2
113
60 65
14
8,2
45
50
27
63
M12
x1
3
1: LED display, 2: setting pushbutton, 3: tightening torque 25 Nm
9
113...123,576,5
32
97...
105,
5
1313
Rp
43
Rp
43
Flow sensors
243
Scale drawings / drawing no. – CAD download: www.ifm.com
10
96...
103
66,513 13
113...123,5
27
Rp
21
Rp
21
11
17 17
42
120...12991,5
106.
..112
Rp
1
Rp
1
12
56
137...146,5121,5
121.
..127
,5
Rp
12
1
Rp
12
1
20 20
13
7,745
15
M12
x1
217
10
2025 146
14
M12
x1
8272
22
14
8,2
44
19 1
1: internal thread M18 x 1.5
15
M12
x1
9282
22
14
7,7
55
19 1
8,2 15
internal thread M18 x 1.5
16
8672
22
14
8,2
44
19 1
1: internal thread M18 x 1.5
17
103,5
35,5
2510
0
2
1
LEDs
LEDs
1 2 3 4
5 6 7 8
9 10 11 12
21 22 23 24
17 18 19 20
1: Potentiometer (switch point flow), 2: Potentiometer (switch pointtemperature)
18
27
64
M12
x1
4
1 2
835248
50
19,7
3
1: LED display, 2: setting pushbutton, 3: connection for voltage sup-ply and output signals, 4: connection for flow sensor
Flow sensors
244Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
19
G2
1
124515
80
8,2
27
20
17
57
122713
M12
x1
7,7
21
M12
x1
124515
75
7,7
27
G2
1
22
45
78
1 2
19 20 21
13 14 15 16 17 18
3
97 8
+
120
35,5
1
1: mounting on DIN rail
23
140133
113
32
23
2 LED
pot.2 LED
24
182,3
21,3
M12
x1
100111
74,5
G1
4 /
45
1 2
G1
4 /
60 20
31
3
1: 4-digit alphanumeric display, 2: Programming buttons, 3: hole forM5 fixing screw
25
R210
30016
,1
21,3
M12
x1
100111
76,8
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
26
475375
27,3
33,7
R 1
M12
x1
100111
88,5
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
27
39
R11
2
275475
42
100111
M12
x1
120
45
1 2
1: 4-digit alphanumeric display, 2: Programming buttons
Flow sensors
245
Scale drawings / drawing no. – CAD download: www.ifm.com
28
133
45
1 2
54
R2 51
100111
M12
x1
275475
1: 4-digit alphanumeric display, 2: Programming buttons
29
114
4,5
37
10M
12x1
100
125
111117
56
45
G8
1
48
65
1: 4-digit alphanumeric display, 2: Programming buttons, 3: flowconditioner
30
G4
3
G4
3
11096
100
80,5
M12
x1
installation length with pipe adapter E40151 / E40154: 185 mm
31
80,5
M12
x1
G1
13096
100
G1
installation length with pipe adapter E40152 / E40155: 205 mm,installation length with pipe adapter E40153 / E40156: 215 mm
32
80,5
M12
x1
26
48
13096
100
G1
41
G1
41
Flow sensors
246Product selectors and further information can be found at: www.ifm.com
Flow sensors
247
Transmitters or sensors with integrated control monitor.
Units with special design for hygienic applications.
Measuring principles with overload protection and a good long-term stability.
Measuring range from -1…600 bar.
Variable process connection and sealing technology via adapter.
Pressure sensors
ifm offers a wide range of electronic pressure and vacuum sensors to meet therequirements of various industrial applications. The ceramic-capacitive measuringcell, tried and tested a million times, is complemented by a stainless steel measuringcell with thick-film wire strain gauges (series PK, PV, PT) and a piezoresistivemeasuring technique (for pneumatic applications).
All units have robust housings and do not require moving parts such as pistons orsprings. The result: the sensors are extremely shock and vibration resistant andoperate without any wear or maintenance.
The tried and tested ceramic-capacitive measuring principle is corrosion-resistantand long-term stable. In the long run this guarantees continuous accuracy of themeasured values. The sensors are resistant to dynamic pressure peaks andguarantee high overload resistance even in the case of extreme pressure peaksthat occur for example with fast closing valves.
Units with wire strain gauge in thick-film technology on a stainless steel measuringcell are distinguished by their very compact and robust design. They can be usedin almost all industrial areas. The welded stainless steel measuring cell withoutany seals ensures a high degree of safety, in particular for applications with gaspressures of up to 400 bar as well as in air-conditioning and refrigerating technol-ogy where aggressive coolants (freons) are used.
Local display:the clearly readableLED display showsthe current systempressure.
Separate display /programming unit
PP2001.
Pressure sensors
248
Selection chart Page
Sensors with switching outputs and analogue outputs and display 250 - 251
Sensors with switching outputs and display 251 - 253
PY sensors with CETOP flange and display 253
PK sensors with mechanical setting and switching outputs 253 - 255
PT sensors for industrial applications with analogue outputs 255 - 256
PP sensors for mobile applications with switching outputs, IO-Link 256 - 257
PT sensors for mobile applications with analogue outputs 257
PA / PPA sensors for industrial applications with analogue outputs / AS-i 258 - 259
Part seat monitoring 259
Sensors for hydrostatic level monitoring 259
PNI sensors with analogue input 259 - 260
Sensors with ATEX approval 3D 260
Sensors for pneumatic applications 260
PI sensors for hygienic and wet areas with switching and analogue output 260
Electronic contact manometers for hygienic and wet areas with switching output and analogue output 261
PF sensors for hygienic and wet areas with switching and analogue output 261
PE sensors with display with 2 switching outputs or switching and analogue output 262
Fixing components for pressure sensors 262
Accessories and software 262 - 263
Adapters and accessories for adapters 263
Wiring diagrams 263 - 264
Scale drawings / drawing no. – CAD download: www.ifm.com 264 - 268
Pressure sensors
249
Sensors with switching outputs and analogue outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 11 · Connector groups 7, 8
G¼ I Display unit 0...400 600 1000 20...30 1 PN2020
G¼ I Display unit 0...250 400 850 20...30 2 PN2021
G¼ I Display unit 0...100 300 650 20...30 2 PN2022
G¼ I Display unit -1...25 100 350 20...30 2 PN2023
G¼ I Display unit -1...10 75 150 20...30 2 PN2024
G¼ I Display unit -0.125...2.5 20 50 20...30 2 PN2026
G¼ I Display unit -0.05...1 10 30 20...30 2 PN2027
G¼ I Display unit -1...1 20 50 20...30 2 PN2009
G¼ I Display unit -0.0125...0.25 10 30 20...30 2 PN2028
¼" NPT Display unit 0...400 600 1000 20...30 3 PN2220
¼" NPT Display unit 0...250 400 850 20...30 4 PN2221
¼" NPT Display unit 0...100 300 650 20...30 4 PN2222
¼" NPT Display unit -1...25 100 350 20...30 4 PN2223
¼" NPT Display unit -1...10 75 150 20...30 4 PN2224
¼" NPT Display unit -0.125...2.5 20 50 20...30 4 PN2226
Pressure sensors
250Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 11 · Connector groups 7, 8
¼" NPT Display unit -0.05...1 10 30 20...30 4 PN2227
¼" NPT Display unit -0.0125...0.25 10 30 20...30 4 PN2228
M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · Wiring diagram no. 1 · Connectorgroups 7, 8
G¼ I Display unit 0...600 800 1200 18...36 5 PN3060
G¼ I Display unit 0...400 600 1000 18...36 5 PN3000
G¼ I Display unit 0...250 400 850 18...36 6 PN3001
G¼ I Display unit 0...100 300 650 18...36 6 PN3002
G¼ I Display unit 0...25 150 350 18...36 6 PN3003
G¼ I Display unit -1...10 75 150 18...36 6 PN3004
G¼ I Display unit 0...2.5 20 50 18...36 6 PN3006
G¼ I Display unit 0...1 10 30 18...36 6 PN3007
G¼ I Display unit -1...0 10 30 18...36 6 PN3029
Sensors with switching outputs and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
G¼ I Display unit 0...400 600 1000 18...36 5 PN5000
G¼ I Display unit 0...250 400 850 18...36 6 PN5001
Pressure sensors
251You can find wiring diagrams and scale drawings from page 263
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
G¼ I Display unit 0...100 300 650 18...36 6 PN5002
G¼ I Display unit 0...25 150 350 18...36 6 PN5003
G¼ I Display unit -1...10 75 150 18...36 6 PN5004
G¼ I Display unit 0...2.5 20 50 18...36 6 PN5006
G¼ I Display unit 0...1 10 30 18...36 6 PN5007
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x nor-mally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8
G¼ I Display unit 0...600 800 1200 18...36 5 PN7060
G¼ I Display unit 0...400 600 1000 18...36 5 PN7000
G¼ I Display unit 0...250 400 850 18...36 6 PN7001
G¼ I Display unit 0...100 300 650 18...36 6 PN7002
G¼ I Display unit 0...25 150 350 18...36 6 PN7003
G¼ I Display unit -1...10 75 150 18...36 6 PN7004
G¼ I Display unit 0...2.5 20 50 18...36 6 PN7006
G¼ I Display unit 0...1 10 30 18...36 6 PN7007
G¼ I Display unit -1...1 20 50 18...36 6 PN7009
¼" NPT Display unit 0...400 600 1000 18...36 7 PN7200
¼" NPT Display unit 0...250 400 850 18...36 8 PN7201
Pressure sensors
252Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8
¼" NPT Display unit 0...100 300 650 18...36 8 PN7202
¼" NPT Display unit 0...25 150 350 18...36 8 PN7203
¼" NPT Display unit -1...10 75 150 18...36 8 PN7204
¼" NPT Display unit 0...2.5 20 50 18...36 8 PN7206
¼" NPT Display unit 0...1 10 30 18...36 8 PN7207
PY sensors with CETOP flange and display
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8
G¼ I / M6 Display unit 0...400 450 1000 18...36 9 PY7000
G¼ I / M6 Display unit 0...250 400 850 18...36 9 PY7001
G¼ I / M6 Display unit 0...100 300 650 18...36 9 PY7002
G¼ I / M6 Display unit 0...25 150 350 18...36 10 PY7003
PK sensors with mechanical setting and switching outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
G¼ A / M5 I Operation 0...400 600 1600 9.6...32 11 PK5520
G¼ A / M5 I Operation 0...250 400 1000 9.6...32 11 PK5521
Pressure sensors
253You can find wiring diagrams and scale drawings from page 263
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
G¼ A / M5 I Operation 0...100 200 1000 9.6...32 11 PK5522
G¼ A / M5 I Operation 0...25 60 500 9.6...32 11 PK5523
G¼ A / M5 I Operation 0...10 25 300 9.6...32 11 PK5524
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8
G¼ A / M5 I Operation 0...400 600 1600 9.6...32 11 PK6520
G¼ A / M5 I Operation 0...250 400 1000 9.6...32 11 PK6521
G¼ A / M5 I Operation 0...100 200 1000 9.6...32 11 PK6522
G¼ A / M5 I Operation 0...25 60 500 9.6...32 11 PK6523
G¼ A / M5 I Operation 0...10 25 300 9.6...32 11 PK6524
M12 connector · Output function · DC PNP · Wiring diagram no. 4 · Connector groups 7, 8
G¼ A / M5 I Switching status 0...400 600 1600 9.6...32 11 PK7520
G¼ A / M5 I Switching status 0...250 400 1000 9.6...32 11 PK7521
G¼ A / M5 I Switching status 0...100 200 1000 9.6...32 11 PK7522
G¼ A / M5 I Switching status 0...10 25 300 9.6...32 11 PK7524
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8
R¼ A / M5 I Operation 0...400 600 1600 9.6...32 12 PK6730
R¼ A / M5 I Operation 0...250 400 1000 9.6...32 12 PK6731
Pressure sensors
254Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 3 · Connector groups 7, 8
R¼ A / M5 I Operation 0...100 200 1000 9.6...32 12 PK6732
R¼ A / M5 I Operation 0...10 25 300 9.6...32 12 PK6734
M12 connector · Output function normally open / closed complementary · DC NPN · Wiring diagram no. 5 · Connector groups 7, 8
R¼ A / M5 I Operation 0...400 600 1600 9.6...32 12 PK8730
R¼ A / M5 I Operation 0...250 400 1000 9.6...32 12 PK8731
R¼ A / M5 I Operation 0...100 200 1000 9.6...32 12 PK8732
R¼ A / M5 I Operation 0...10 25 300 9.6...32 12 PK8734
PT sensors for industrial applications with analogue outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector groups 7, 8
G¼ A – 0...400 600 1600 8.5...36 13 PT3540
G¼ A – 0...250 400 1000 8.5...36 13 PT3541
G¼ A – 0...100 200 1000 8.5...36 13 PT3542
G¼ A – 0...25 60 600 8.5...36 13 PT3543
G¼ A – 0...10 25 300 8.5...36 13 PT3544
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 7, 8
G¼ A – 0...400 600 1600 16...36 13 PT9540
Pressure sensors
255You can find wiring diagrams and scale drawings from page 263
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 7, 8
G¼ A – 0...250 400 1000 16...36 13 PT9541
G¼ A – 0...100 200 1000 16...36 13 PT9542
G¼ A – 0...25 60 600 16...36 13 PT9543
G¼ A – 0...10 25 300 16...36 13 PT9544
PP sensors for mobile applications with switching outputs, IO-Link
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 8 · Connector groups 7, 8
G¼ A / M5 I Operation 0...400 600 1000 9.6...36 14 PP7550
G¼ A / M5 I Operation 0...250 400 850 9.6...36 14 PP7551
G¼ A / M5 I Operation 0...100 300 650 9.6...36 14 PP7552
G¼ A / M5 I Operation 0...25 150 350 9.6...36 14 PP7553
G¼ A / M5 I Operation -1...10 75 150 9.6...36 14 PP7554
G¼ A / M5 I Operation 0...2.5 20 50 9.6...36 14 PP7556
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 8 · Connector groups 7, 8
G¼ A / M5 I Operation 0...400 600 1000 9.6...36 14 PP0520
G¼ A / M5 I Operation 0...250 400 850 9.6...36 14 PP0521
G¼ A / M5 I Operation 0...100 300 650 9.6...36 14 PP0522
Pressure sensors
256Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC NPN · Wiring diagram no. 8 · Connector groups 7, 8
G¼ A / M5 I Operation 0...25 150 350 9.6...36 14 PP0523
G¼ A / M5 I Operation -1...10 75 150 9.6...36 14 PP0524
PT sensors for mobile applications with analogue outputs
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector group —
G¼ A – 0...400 600 1600 8.5...36 13 PT3550
G¼ A – 0...250 400 1000 8.5...36 13 PT3551
G¼ A – 0...100 200 1000 8.5...36 13 PT3552
G¼ A – 0...25 60 600 8.5...36 13 PT3553
G¼ A – 0...10 25 300 8.5...36 13 PT3554
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector group —
G¼ A – 0...400 600 1600 16...36 13 PT9550
G¼ A – 0...250 400 1000 16...36 13 PT9551
G¼ A – 0...100 200 1000 16...36 13 PT9552
G¼ A – 0...25 60 600 16...36 13 PT9553
G¼ A – 0...10 25 300 16...36 13 PT9554
Pressure sensors
257You can find wiring diagrams and scale drawings from page 263
PA / PPA sensors for industrial applications with analogue outputs / AS-i
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 6 · Connector groups 7, 8
G¼ I – 0...600 800 1200 9.6...32 15 PA3060
G¼ I – 0...400 600 1000 9.6...32 16 PA3020
G¼ I – 0...250 400 850 9.6...32 16 PA3021
G¼ I – 0...100 300 650 9.6...32 17 PA3022
G¼ I – 0...25 150 350 9.6...32 17 PA3023
G¼ I – 0...10 75 150 9.6...32 17 PA3024
G¼ I – 0...2.5 20 50 9.6...32 17 PA3026
G¼ I – 0...1 10 30 9.6...32 17 PA3027
G¼ I – -1...0 10 30 9.6...32 17 PA3029
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 7, 8
G¼ I – 0...600 800 1200 16...32 15 PA9060
G¼ I – 0...400 600 1000 16...32 15 PA9020
G¼ I – 0...250 400 850 16...32 17 PA9021
G¼ I – 0...100 300 650 16...32 17 PA9022
G¼ I – 0...25 150 350 16...32 17 PA9023
G¼ I – 0...10 75 150 16...32 17 PA9024
Pressure sensors
258Product selectors and further information can be found at: www.ifm.com
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 0...10 V analogue · DC · Wiring diagram no. 7 · Connector groups 7, 8
G¼ I – 0...2.5 20 50 16...32 17 PA9026
G¼ I – 0...1 10 30 16...32 17 PA9027
G¼ I – 0...0.25 10 30 16...32 17 PA9028
G¼ I – -1...0 10 30 16...32 17 PA9029
Part seat monitoring
Type Description Orderno.
Control unit for part seat monitoring · Setting by adjustment of the pneumatic bridge · Integrated pressure sensor with 2 switchingoutputs · and 4-digit alphanumerical display for trend display or display of current pressure · Cable
PS7570
Sensors for hydrostatic level monitoring
Type Measuringrange[bar]
Cable length /material
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
Output 4...20 mA analogue · Wiring diagram no. 9
0...0.253 m
PUR cable2 2.4 10...30 18 PS3208
0...0.610 m
PUR cable4 4.8 10...30 18 PS3407
PNI sensors with analogue input
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 10 · Connectorgroup —
G¼ I Display unit 0...250 400 850 18...30 6 PNI021
G¼ I Display unit 0...100 300 650 18...30 6 PNI022
Pressure sensors
259You can find wiring diagrams and scale drawings from page 263
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 10 · Connectorgroup —
G¼ I Display unit 0...25 100 350 18...30 6 PNI023
G¼ I Display unit 0...10 50 150 18...30 6 PNI024
Sensors with ATEX approval 3D
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DC PNP · Wiring diagram no. 1 ·Connector group —
G¼ I Display unit -1...0 10 30 18...36 19 PN009A
Sensors for pneumatic applications
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8
G 1/8 I Display unit -1...1 20 30 18...36 20 PN7809
G 1/8 I Display unit -1...10 20 30 18...36 20 PN7834
M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP · Wiring diagram no. 4 · Connector groups 4, 5, 6
G 1/8 I Display unit -1...1 20 30 18...32 21 PQ7809
G 1/8 I Display unit -1...10 20 30 18...32 21 PQ7834
PI sensors for hygienic and wet areas with switching and analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN ·Wiring diagram no. 13 · Connector groups 7, 8
G ¾ A Display unit -1...4 30 100 18...32 22 PI2995
Pressure sensors
260Product selectors and further information can be found at: www.ifm.com
Electronic contact manometers for hygienic and wet areas with switching output andanalogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DCPNP/NPN · Wiring diagram no. 13 · Connector groups 7, 8
Aseptoflex Vario Display unit -1...25 100 350 18...32 23 PG2793
Aseptoflex Vario Display unit -1...10 50 150 18...32 23 PG2794
Aseptoflex Vario Display unit -1...4 30 100 18...32 23 PG2795
PF sensors for hygienic and wet areas with switching and analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · Wiring diagram no. 11 · Connector groups 7, 8
G1 A Switching status -1...100 200 650 20...30 24 PF2652
G1 A Switching status -1...25 100 350 20...30 25 PF2653
G1 A Switching status -0.5...10 50 150 20...30 25 PF2654
G1 A Switching status -0.13...2.5 20 50 20...30 25 PF2656
G1 A Switching status -0.05...1 10 30 20...30 25 PF2657
G1 A Switching status -0.013...0.25 10 30 20...30 25 PF2658
G1 A Switching status -0.99...1 20 50 20...30 25 PF2609
Pressure sensors
261You can find wiring diagrams and scale drawings from page 263
PE sensors with display with 2 switching outputs or switching and analogue output
Type Processconnection
Display
LED
Measuringrange[bar]
Poverload
max. [bar]
Pbursting
min. [bar]
UbDC[V]
Draw-ingno.
Orderno.
M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN · Wiring diagram no. 12 · Connector groups 7, 8
G¼ I Display unit 0...10 75 150 18...36 6 PE7004
G¼ I Display unit 0...25 150 350 18...36 6 PE7003
Fixing components for pressure sensors
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Mounting device 2 way · for fluid sensors · Housing materials: POM E30078
Accessories and software
Type Description Orderno.
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / Viton / ventilation strip: Teflon film 0.32 mm / O-ring: Viton
E30101
Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571 / PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM
E30104
Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / EPDM/X / PC copolymer / PBT / FPM
PP2001
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)
E30396
Pressure sensors
262Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Cable clamp fastener · for submersible pressure transmitter PS3 · Housing materials: steel / plastics E30399
Filter element · for submersible pressure transmitter PS3 · for fixing on the capillary tube E30400
Splitter box · with ventilation and terminal block · for submersible pressure transmitter PS3 · Housing materials: plastics E30401
Additional weight · for submersible pressure transmitter PS3 · Housing materials: stainless steel 316Ti / 1.4571 E30402
DIN rail clip · Housing materials: stainless steel E37340
Adapters and accessories for adapters
Type Description Orderno.
Adapter · R1/8 - R1/8 · rotatable · Housing materials: brass nickel-plated E37350
T pipe mounting set · G1/2 · with reducer G1/2 - G1/8, adapter R1/8 - R1/8 rotatable, seal G1/2 · Housing materials: brass nickel-plated
E37360
Flange adapter · G ¼ · Hole spacing · 31.1 mm · Housing materials: sealing: NBR, acrylonitrile-butadiene-rubber / flange: aluminium / hollow screw: brass
E30003
Adapter · G ¼ - G ½ · Housing materials: stainless steel / FPM E30000
Adapter · G ¼ - G ¼ · Housing materials: stainless steel / FPM E30007
Core colours
BN brown
GY grey
WH white
Wiring diagrams
1
L+
L3 BU
4 BK
2 WH
1 BN
2
L+
L
1
4
3
3
4
L
L+1
2
32:4:
Pressure sensors
263
Wiring diagrams
4
2
L
L+
4
1
3Out 1Out 2
4:2:
5
L
L+
4:32:
4
2
1
6
L+
L
1
2
7
L+
L
1
3
2
8
4
1
3
2OUT2
L+
L
OUT1/Teach/Data
9
BN
GY
WH
L+
L
10
L+
L
Uref
Out 1
Out 2
In
In+
1
2
3
5
6
7
4
OU2
OU1
+InP2
10 V
11
4
L
L+
2
1
3Out 1Out 2
4:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
4
1
3
2L+
LOut 1Out 2
4:2:
2
1
3
4L+
LOut 1Out 2
4:2:
12
Out 1Out 2
4
L
L+
2
1
34:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
13
4
1
3
2L+
L
2
1
3
4L+
L
Scale drawings / drawing no. – CAD download: www.ifm.com
1
30
47,8
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
2
91,5
34
27
1,3
21,5
2 3
1
30
47
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
Pressure sensors
264Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
3
94,1
34
27
2 3
1
30
47,8
59,8
"NPT
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
4
91,5
34
27
2 3
1
30
47
57,3
M12
x1
12
"NPT1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
5
30
48
59,6
G
M12
x1
16,5
1 4/
94,1
34
27
1,3
21,5
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
6
91,5
34
27
1,3
21,5
2 3
1
30
48
57,3
G
M12
x1
14
1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
7
30
48
59,8
M12
x1
12
''NPT1 4/
94
34
27
2 3
1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
8
91,5
34
27
2 3
1
30
48
57,3
M12
x1
12
''NPT1 4/
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
Pressure sensors
265
Scale drawings / drawing no. – CAD download: www.ifm.com
9
24,3
94
34
32
1
4030
17,5
12
5,5
4031,1
5,5
29
6,6
4031,1
2948
59,6
M12
x1
G 41
21,5
40
10,5
M6
M6
1,3
1,3 1,3
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
10
4031,1
5,5
29
6,6
4031,1
29
22,1
94
34
32
1
4030
15,3
12
5,5
G 41
21,5
40
10,5
M6
M6
1,3
1,3 1,3
10,5
48
59,6
M12
x1
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
11
61,6
12
M12 x127
27
71,6
G1 4/
M5
7,5
2
1
1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14
12
60,6
13
R 41
M12 x127
27
70,6
M5
7,5
1
1: tightening torque 25 Nm
13
22
1
51,2
12
G1 4/
65,1
M12 x122
1: sealing FPM / DIN 3869-14, tightening torque 25 Nm
14
79,5
M12 x130
30
12
G14/
M5
1
LED
65,5
1: sealing FPM / DIN 3869-14
15
77,5
M12 x130
30
27
1,3
21,5
16,5
G 41
Pressure sensors
266Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
16
75
M12 x130
30
27
1,3
21,5
14
G 41
1: Pressure relief mechanism, No mechanical force must be exertedon the pressure relief mechanism.
17
75
M12 x130
30
27
1,3
21,5
14
G 41
18
100
27
19
94
36
27
21,5
2 3
1
30
49
57,3
G
M12
x1
14
1 4/
1,3
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button
20
1
2
10
178
20
34
34
35,620
15
4,5
5
6 86,6
52,3
M12
x1
3548,4
7 M4
28,5
28,5
1: ventilation connection M5; max. tightening torque 2.5 Nm, 2: main pressure connection G 1/8; tightening torque max. 8 Nm, 3: Programming button, 4: LEDs (display unit / switching status), 5: 4-digit alphanumeric display, 6: for mounting screw M4; max.tightening torque 2.5 Nm, 7: for mounting screw M4; max. tightening torque 2.5 Nm
21
4,2
354,75
3220
4232
30
20,7
11,3
1: main pressure connection G 1/8; tightening torque max. 8 Nm,thread length max: 7.5 mm, 2: for mounting screw M4; max. tightening torque 2.5 Nm, 3: LEDs (display unit / switching status), 4: 4-digit alphanumeric display, 5: Programming button
Pressure sensors
267
Scale drawings / drawing no. – CAD download: www.ifm.com
22
47
85M
12x1
36
119
34
2 348
20,6
1
G 43
1: 4-digit alphanumeric display, 2: LEDs (display unit / switching status), 3: Programming button
23
24
3
153
16,8
100
2
1
57
60,5
M12
x1
G1
1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton
24
46,5
58M
12x1
41 20°
92
34
M12 x1
27,5
G125,4
1 2
1: 7-segment LED display, 2: Programming button
25
97,4
34
27,5
G125,4
48,5
1 2
46,5
63,1
M12
x1
41 20°
1: 7-segment LED display, 2: Programming button
Pressure sensors
268Product selectors and further information can be found at: www.ifm.com
Pressure sensors
269
Increased process safety due to self-monitoring.
Integrated or separate control monitors selectable.
Modular concept –tailor-made for every application.
Optional fittings for variable connection.
Robust construction for high resistanceto shock and vibration.
Temperature sensors
The temperature sensors of ifm electronic are based on a PT100 or PT1000 resistor.The measured temperature value corresponds to a change in resistance and is con-verted into an electrical analogue signal. A microprocessor controls the evaluationof the electrical signal. The current system temperature is indicated by LEDs directlyon the control monitor.
The microprocessor and the display make process adjustment much easier. The usercan set the values for the switch points, hysteresis and measuring range by meansof programming buttons even without the system temperature being applied. Thisenables installation and setup of the system within a few minutes. The values aresafely stored in an EEPROM independent of the supply voltage.
Film technology is used for the electronic circuitry. A flexible, temperature-resistantand extremely resistant polyimide film is used as carrier of the SMD components.Together with a special potting method an extreme shock and vibration resistance isachieved.
From sensor to system
A complete temperature measurement system usually consists of severalcomponents. The temperature in a medium is detected by a sensor and is convertedinto an electrical measured signal. The mechanical design and the dimensions ofthe sensors must vary to enable use for different media and measuring points.Depending on the application ifm electronic offers a selection of robust probe sen-sors or types with connection cables. To indicate and process the measured valuethe sensor is connected to a separate control monitor. It indicates the measuredvalue on its integrated display. To complete the modular systems ifm electronicoffers compact temperature sensors with integrated control monitors. If a local tem-perature display is not required, temperature transmitters are frequently used.ifm electronic provides units with excellent response time (TA series) that eitherhave standard output signals or an integrated AS-i interface. In hygienic applicationsthe self-monitoring, calibration-free temperature transmitter TAD is an excellentchoice.
Local display of thecurrent temperature.
Imperative: tempera-ture monitoring in air
conditioning.
Temperature sensors
270
Selection chart Page
Compact temperature sensors 272
Compact temperature sensors with display, IO-Link 272
Control monitors for temperature sensors 272
Control monitors for temperature sensors, IO-Link 273
Modular temperature transmitters 273
Pt1000 probe sensors for standard applications 273 - 274
Pt100 probe sensors for standard applications 274
Cable sensors for standard applications 275
Cable sensors with bolt-on sensor for standard applications 276
Temperature transmitters for standard applications 276
Cable sensors for hygienic and wet areas 276
Temperature transmitters for hygienic and wet areas 277
Accessories for temperature sensors TN / TR 277
Accessories and software 277
Thermowells for temperature sensors 277 - 278
Adapters 278 - 279
Wiring diagrams 279 - 280
Scale drawings / drawing no. – CAD download: www.ifm.com 280 - 282
Temperature sensors
271
Compact temperature sensors
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · Output function normally open / closed complementary · DC PNP · Wiring diagram no. 1 · Connector groups 7, 8
-25...140 G¼ A 39 9.6...32 1 / 3 1 TK6130
-25...140 ¼„ NPT 39 9.6...32 1 / 3 2 TK6330
M12 connector · Output function · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
-25...140 G¼ A 39 9.6...32 1 / 3 1 TK7130
-25...140 ¼„ NPT 39 9.6...32 1 / 3 2 TK7330
M12 connector · Output function 1 x normally open / 1 x normally closed · DC PNP · Wiring diagram no. 2 · Connector groups 7, 8
-25...140 G½ A 267 9.6...32 1 / 3 3 TK7480
Compact temperature sensors with display, IO-Link
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 4 · Connector groups 7, 8
-40...150 M18 x 1.5 45 18...32 1 / 3 4 TN2531
M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 5 · Connectorgroups 7, 8
-40...150 M18 x 1.5 45 18...32 1 / 3 4 TN7531
Control monitors for temperature sensors
Type Measuringrange[°C]
Processconnection
Display
LED
Ub
[V]
Currentconsump.
[mA]
Iload
[mA]
Drawingno.
Orderno.
M12 connector · Output function 4 x normally open / closed programmable · DC PNP · Wiring diagram no. 6 · Connector group —
-40...150 G½ A Display unit 18...28 90 < 500 5 TR8430
Temperature sensors
272Product selectors and further information can be found at: www.ifm.com
Control monitors for temperature sensors, IO-Link
Type Measuringrange[°C]
Processconnection
Display
LED
Ub
[V]
Currentconsump.
[mA]
Iload
[mA]
Drawingno.
Orderno.
M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DCPNP/NPN · Wiring diagram no. 7 · Connector groups 7, 8
-40...300 G½ A Display unit 18...32 50 250 6 TR2432
M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN · Wiring diagram no. 8 · Connectorgroup —
-40...300 G½ A Display unit 18...32 50 250 6 TR7432
Modular temperature transmitters
Type Measuringrange
[°C]
Processconnection
Ub
[V]
Ambienttemperature
[°C]
Measuring element Drawingno.
Orderno.
M12 connector · Output function 4...20 mA analogue · DC · Wiring diagram no. 9 · Connector groups 7, 8
-50...300 M12 20...32 -25...70for Pt100 and Pt1000 measuring
elements7 TP3232
0...100 M12 20...32 -25...70for Pt100 and Pt1000 measuring
elements7 TP3237
-50...150 M12 20...32 -25...70for Pt100 and Pt1000 measuring
elements7 TP3231
-18...148.9 M12 20...32 -25...70for Pt100 and Pt1000 measuring
elements7 TP3233
Pt1000 probe sensors for standard applications
Type Measuringrange[°C]
Diameter
[mm]
Probe length
[mm]
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · Wiring diagram no. 3
-40...150 6 160 1 x Pt 1000 1 / 3 8 TT1250
-40...150 8 160 1 x Pt 1000 1 / 3 9 TT1150
-40...150 8 360 1 x Pt 1000 1 / 3 9 TT3150
Temperature sensors
273You can find wiring diagrams and scale drawings from page 279
Type Measuringrange[°C]
Diameter
[mm]
Probe length
[mm]
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · Wiring diagram no. 3
-40...150 10 160 1 x Pt 1000 1 / 3 10 TT1050
-40...150 10 260 1 x Pt 1000 1 / 3 10 TT2050
-40...150 10 360 1 x Pt 1000 1 / 3 10 TT3050
-40...150 10 560 1 x Pt 1000 1 / 3 10 TT5050
Pt100 probe sensors for standard applications
Type Measuringrange[°C]
Diameter
[mm]
Probe length
[mm]
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · Connector groups 7, 8
-40...150 8 160 1 x Pt 100 1 / 3 9 TT1181
-40...150 8 260 1 x Pt 100 1 / 3 9 TT2181
-40...150 8 360 1 x Pt 100 1 / 3 9 TT3181
-40...150 10 160 1 x Pt 100 1 / 3 10 TT1081
-40...150 10 260 1 x Pt 100 1 / 3 10 TT2081
-40...150 10 360 1 x Pt 100 1 / 3 10 TT3081
-40...150 10 560 1 x Pt 100 1 / 3 10 TT5081
Temperature sensors
274Product selectors and further information can be found at: www.ifm.com
Cable sensors for standard applications
Type Measuringrange[°C]
Diameter
[mm]
Cablematerial
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
Cable 4 m · high-grade stainless steel
-30...180 M5 / L = 25.7 silicone cable 1 x Pt 100 3 / 8 11 TS4759
Cable with connector 2 m · high-grade stainless steel · Connector groups 7, 8
-40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 1000 3 / 10 12 TS2251
-40...150 Ø 8 / L = 50 FPM (Viton) cable 1 x Pt 1000 7 / 18 13 TS2151
-40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 6 / 25 14 TS2051
-50...250 Ø 6 / L = 50 PTFE cable 1 x Pt 100 11 / 37 15 TS2256
-50...250 Ø 10 / L = 50 PTFE cable 1 x Pt 100 12 / 39 16 TS2056
-30...180 – silicone cable 1 x Pt 100 3 / 8 17 TS2759
-30...180 M6 / L = 25.7 silicone cable 1 x Pt 100 3 / 8 18 TS2659
Cable with connector 2.5 m · high-grade stainless steel · Connector groups 7, 8
-40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 100 3 / 10 19 TS9281
Cable with connector 5 m · high-grade stainless steel · Connector groups 7, 8
-40...150 Ø 8 / L = 50 FPM (Viton) cable 1 x Pt 1000 7 / 18 13 TS5151
-40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 6 / 25 14 TS5051
Cable with connector 10 m · high-grade stainless steel · Connector groups 7, 8
-30...180 – silicone cable 1 x Pt 100 3 / 8 17 TS0759
Temperature sensors
275You can find wiring diagrams and scale drawings from page 279
Cable sensors with bolt-on sensor for standard applications
Type Measuringrange[°C]
Diameter
[mm]
Cablematerial
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
Cable with connector 2 m · stainless steel · Connector groups 7, 8
-25...90 M6 / 12 x 51 PUR cable 1 x Pt 100 9 / 15 20 TS2229
Temperature transmitters for standard applications
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 7, 8
-50...150 G¼ A 60 10...30 1 / 3 21 TA3131
0...140 G¼ A 60 10...30 1 / 3 21 TA3130
-50...150 G¼ A 200 10...30 1 / 3 22 TA3171
-17.8...148.9 ¼„ NPT 47 10...30 1 / 3 23 TA3333
0...100 ¼„ NPT 47 10...30 1 / 3 23 TA3337
Cable sensors for hygienic and wet areas
Type Measuringrange[°C]
Diameter
[mm]
Cablematerial
Sensorelement
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
Cable with connector 2 m · high-grade stainless steel · Connector groups 7, 8
-40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 6 / 25 14 TS2051
Cable with connector 5 m · high-grade stainless steel · Connector groups 7, 8
-40...150 Ø 10 / L = 45 FPM (Viton) cable 1 x Pt 1000 6 / 25 14 TS5051
Cable with connector 2 m · high-grade stainless steel · Connector groups 7, 8
-50...250 Ø 10 / L = 50 PTFE cable 1 x Pt 100 12 / 39 16 TS2056
Temperature sensors
276Product selectors and further information can be found at: www.ifm.com
Temperature transmitters for hygienic and wet areas
Type Measuringrange[°C]
Processconnection
Probe length
[mm]
Ub
[V]
Dynamic responseT05 / T09
[s]
Drawingno.
Orderno.
M12 connector · high-grade stainless steel · DC · Connector groups 7, 8
0...140 G½ A 87.5 10...30 1 / 3 24 TA3430
0...100 Ø 6 mm 123 10...30 1 / 3 25 TA3237
-10...150 Ø 6 mm 123 10...30 1.2 / 3.5 25 TA3231
Accessories for temperature sensors TN / TR
Type Description Orderno.
Mounting clamp · Ø 34 mm · Housing materials: PBT E10017
Mounting device 2 way · for fluid sensors · Housing materials: POM E30078
Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006
Accessories and software
Type Description Orderno.
IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)
E30396
Thermowells for temperature sensors
Type Description Orderno.
Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316L / 1.4404 E35010
Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 182 mm · Housing materials: stainless steel 316L / 1.4404 E35020
Temperature sensors
277You can find wiring diagrams and scale drawings from page 279
Type Description Orderno.
Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 282 mm · Housing materials: stainless steel 316L / 1.4404 E35030
Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 482 mm · Housing materials: stainless steel 316L / 1.4404 E35050
Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316Ti / 1.4571 E37010
Adapters
Type Description Orderno.
Mounting set · for direct connection of temperature sensors TT to control monitors TR · Housing materials: stainless steel E30017
Clamp fitting · Ø 6/8/10 mm - G ½ · for temperature sensors TS / TT · Housing materials: stainless steel / FPM E30018
Progressive ring fitting for temperature sensors · Ø 10 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30016
Progressive ring fitting for temperature sensors · Ø 10 mm - ½„ NPT · Housing materials: stainless steel 316Ti / 1.4571 E30024
Progressive ring fitting for temperature sensors · Ø 8 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30046
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128
Adapter · M18 x 1.5 - L18 · for mounting in T-pieces · Insertion depth of the probe of SID, SFD, TN: · 28.5 mm · Housing materials:nut: stainless steel 316Ti / 1.4571 / adapter: stainless steel 316L / 1.4404 / O-ring: FPM 16 x 1.5 gr 70° Shore A
E40104
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404
E40101
Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40100
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L / 1.4404
E40099
Temperature sensors
278Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: brass E40098
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096
Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: brass E40097
Adapter · M18 x 1.5 - ½„ NPT · Insertion depth of the probe of SID, SFD, TN: · 23 mm · Housing materials: stainless steel 316L /1.4404
E40107
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
Wiring diagrams
1
4
L
L+1
2
32:4:
2
2
L
L+
4
1
3Out 1Out 2
4:2:
3
1
2
3
4
4
4
1
3
2L+
L
2
1
3
4L+
L
5
Out 1Out 2
4
L
L+
2
1
34:2:
4
L
L+
2
1
3Out 1Out 2
4:2:
6
TR 8430
L+
L
n.c.
Out 4
Out 1
Out 2
1
2
4
6
7
3
Out 35
3 (n.c.)
1 (n.c.)
4
2
7
L+
L
1 BN
2 WH
4 BK
3 BUTR 2432
1
2
3
4
2
B
1
2
3
4
3
1
1
2
3
4
B
B
1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor, B: link
Temperature sensors
279
Wiring diagrams
8
L+
L
1 BN
2 WH
4 BK
3 BU
1
2
3
4
2
B
1
2
3
4
3
1
1
2
3
4
B
B
TR
1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor,B: link
9
4
1
3
2
L+
L
L
IO-Link1
2
3
4
1
2
3
4
1
2
3
4
B
B
TP
1: Two-wire sensor, 2: Four-wire sensor, 3: Operation as 2-wiretemperature transmitter, 4: Operation as 3-wire unit, IO-Linkcommunication possible, B: link
Scale drawings / drawing no. – CAD download: www.ifm.com
1
39
M12 x127
27
96,5
25
8,2
G 41
87
2
48
M12 x127
27
105,
5
35
8,2
-18 NPT41
96
3
267
M12 x127
2732
7
G 21
8
255
4
4514
128
34
8,2
2 3
1
48
94,5
M12
x1
22 4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: internal thread M18 x 1.5
Temperature sensors
280Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
5
93
3416
,5
G 21
2 3
1
30
48
60M
12x1
4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor
6
93
34
16,5
G 21
2 3
1
30
48
60M
12x1
4
1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4: connection for temperature sensor
7
18M12x1
M12x1
25
LED
22 52
2
1: connection for voltage supply and output signals, 2: connectionfor temperature sensor
8
18,5
L
5,95
M12
x1
21,5
40
1
6,2 13,8
6
1: plug area
9
18,5
L
7,95
M12
x1
21,5
40
1
6,2 26
8
1: plug area
10
8
L
10
M12
x1
21,5
18,5
40
1
1: plug area
11
80 ± 525,7
5,4
M54
8
8
12
M12
x1
64572
48
13
M12
x1
8
507248 8
14
M12
x1
7248
50
12
107
42
15
M12
x1
42,5 50 6
Temperature sensors
281
Scale drawings / drawing no. – CAD download: www.ifm.com
16
50
12
107
42
M12
x1
42,5
17
M12
x1
5825,7
5,4
M54
8
8
1: tightening torque 1.5 Nm
18
M12
x1
5825,7
2,5
M65
8
13 6,5
19
M12
x1
7248
45 6
20
M12
x1
49,5
14 35
6,5
51
12
17
8,7
1,8
21
4460
8,2
M12x130
27
13,7
117,
7
13,5
G 41
22
4420
0
8
M12x130
27
13,7
257,
7
13,5
G 41
23
4460
8,2
M12x130
27
13,7
117,
7
13,5
-18 NPT41
24
G 21
43,8 123
8,2
10
M12
x130
27
18,3
13,7
47,5
180,5
LED
87,5
25
34 123
6
M12
x130
14171
Temperature sensors
282Product selectors and further information can be found at: www.ifm.com
Temperature sensors
283
Online vibration diagnosis – optimumprice / performance ratio.
Decentralised monitoring of plant and equipment integrated into the machine.
Compact field units and modular control cabinet units.
Digital and analogue alarm outputs.
Standard data interface (OPC).
Diagnostic systems
efector octavis is a vibration monitor which not only detects vibration data, but alsocarries out signal analysis and machine diagnosis directly on the machine. Themachine condition is determined and is forwarded to the PLC or to SCADAsoftware. It fulfils the main requirements for modern machine monitoring: compati-bility, modularity and transferable configuration.
Compatible and modular
The compatibility with data structures such as the OPC interface makes it possibleto integrate condition data into a higher-level system. With the requirement formodularity the user can define the extent of condition monitoring to be implemen-ted – this means the complete range of diagnosis is possible right from the “firstunit”. Transferable configuration is attained with application-related parameter sets.A wizard function in the software guides the user through creating, managing andarchiving the monitoring parameters.
Trend memory
All units of the octavis family type VE / VSE feature an internal trend memory whichensures detailed analysis and optimisation of the application even without externaldata recording. The storage intervals are freely selectable. This means that thestorage length of the non volatile ring buffer is adjusted to the requirements.
The suitable system for your application:
– Standard vibration characteristic values / permanent machine protection: VSE, VE, VK, VT
– Internal trend memory / root cause analysis: VSE, VE
– Online diagnosis / early damage detection: VSE (VE partly)
– Network capability of the system: VSE (VE partly*)
– Load meter: VSE
*Profibus DP gateway
Internal trend memory(type VE / VSE) of allmonitored diagnosisfactors can be evalu-ated via PC software.
Easy vibrationmonitoring: Type VK
provides a com-bination of switching
output and trans-mitter function in
conjunction with thetried and tested
easy-turn concept.
Diagnostic systems
284
Selection chart Page
Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE 286
Software VB / VE 286
Accessories VB / VE 286
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 287
Accessories VK 287
Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE 287
Accessories VSE 287
Connection cables VSE 287
Vibration sensors for connection to external diagnostic electronics VSE - type VSA 288
Scale drawings / drawing no. – CAD download: www.ifm.com 288 - 289
Diagnostic systems
285
Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE
Type Description Draw-ingno.
Orderno.
Rolling element bearing monitor · Spectral analysis · Envelope-curve FFT · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated / keypad: polyester
1 VB1001
Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated / keypad: polyester
1 VE1001
Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated
2 VE1101
Vibration diagnostic unit · Spectral analysis · Trend analysis · Connection via M12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated
3 VE1103
Software VB / VE
Type Description Draw-ingno.
Orderno.
Expert software for efector octavis · Types VB and VE – VES001
Accessories VB / VE
Type Description Orderno.
Parameter setting cable for efector octavis · ifm electronic · straight / straight · 3 m · Housing materials: PUR E11572
USB/RS485 adapter cable · ifm electronic · straight / straight E30098
Power supply · 2 m · Housing materials: PPE E30080
Y connection cable · ifm electronic · 2 way · Free from halogen · 0.25 m · Housing materials: TPU E11664
Diagnostic systems
286Product selectors and further information can be found at: www.ifm.com
Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK
Type Description Draw-ingno.
Orderno.
Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...25 mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404
4 VKV021
Accessories VK
Type Description Orderno.
Protective cover · with lead seal option · for pressure sensors type PK · for temperature sensors type TK · for vibration monitor VK ·Housing materials: PP transparent
E30094
Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE
Type Description Draw-ingno.
Orderno.
Diagnostic electronics for vibration sensors · Ethernet interface · Switching output, Analogue output · Combicon connection · PA
5 VSE002
Diagnostic electronics for vibration sensors · 4 sensor inputs 0...10 mA · Ethernet interface · Switching output, Analogue output · Combicon connection · PA
6 VSE100
Accessories VSE
Type Description Number ofconnections
Orderno.
Parameter setting software for VSExxx – VES003
Connection cables VSE
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 5 m · Housing materials: PUR E30112
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR EC2080
Diagnostic systems
287
Vibration sensors for connection to external diagnostic electronics VSE - type VSA
Type Description Draw-ingno.
Orderno.
Vibration sensor · for connection to external diagnostic electronics · Connector · housing: stainless steel 316L / 1.4404 7 VSA001
Vibration sensor · for connection to external diagnostic electronics · Cable with connector · housing: stainless steel 316L / 1.4404
8 VSA002
Vibration sensor · for connection to external diagnostic electronics type VSExxx · Cable · housing: stainless steel 316L / 1.4404
9 VSA003
Scale drawings / drawing no. – CAD download: www.ifm.com
1
20M5
M12
x1
46,458,2
14
65,3
36
37,6
5,35
10
4
M8
x1
LED
1
1: Programming buttons
2
M12
x1
46,458,2
14
65,3
36
20M5
37,6
5
10
4
5,3
M8x
1
3
M12
x1
46,458,2
14
65,3
36
20M5
37,6
5
10
4
5,3
M8
x1
4
63,7
11
M12 x127
27
73,1
M81
1: tightening torque 15 Nm
Diagnostic systems
288Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
5
103,4
35,5
25,4
100
1
LEDs
1: Ethernet interface
6
50
114
LEDs
2
1
105
35,5
1: Ethernet interface, 2: Combicon plug with screw terminals (optio-nal)
7
18,5
M8
x1,2
5
M12
x117
5324
178
1
1: conical angle = 90°
8
13
M16
x1,5
14
2218
5
9
18
11,5
12
1500
5,5
Diagnostic systems
289
Manufacturer-independent standard.
Worldwide acceptance as a wiring system.
Communication from the sensor to the controller.
“Safety at Work” for safety-related applications.
Intelligent system solutions for special tasks.
Bus system AS-interface
AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent stan-dard for the connection of actuators and sensors of the first field level. It is the onlywiring system accepted worldwide. With 15 million slaves installed AS-i has beentried and tested as a low-cost feeder for all common fieldbuses for many years.
The product range includes AS-i components for different areas from packagingand conveying via silo applications, machine tools, robotics and automation to thefood industry and mobile vehicles.
Safe
The sophisticated AS-i technology and the extended diagnostic possibilities providehigh reliability and machine uptime.
“Safety at Work” is the extension of the AS-interface by safety-related components.Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.
Easy
Due to the standardised system, the low wiring complexity and the quick connec-tion technology, AS-i enables simple “Plug & Play”. The reduction of terminals leadsto reduced documentation.
Data and energy are jointly transmitted via a two-wire cable. The reverse polarityprotected insulation displacement technology helps avoid errors. The modularityand the tree structure smoothly fit to the way the plant is put together.
Cost-optimised
It’s the end result that matters: Wiring complexity, documentation and set-up timesare significantly reduced. The decentralisation of the AS-i participants leads tosmaller and less expensive control cabinets. Simple diagnosis and a clear systemdesign result in high machine uptime and avoid downtimes.
With “Safety atWork” AS-i alsosolves safety-related tasks.
Reduced cost:reduced wiring com-
plexity for fasterinstallation and fewer
error sources.
Bus system AS-interface
290
Selection chart Page
Controllers, gateways and software 292
AS-i power supplies 293
Insulation monitors 293
I/O modules for control cabinets 293
Field modules IP67 294
Field modules IP69K and accessories 294
Module lower parts 294 - 295
Pneumatic and actuator solutions 295
Safety at Work 295 - 296
AS-i sensors 296
Combicon connectors 296
Flat cable splitters and accessories 296
Accessories Safety at Work 297
Accessories lower parts and addressing units 297
Accessories RFID 298
Scale drawings / drawing no. – CAD download: www.ifm.com 298 - 302
Bus system AS-interface
291
Controllers, gateways and software
Type Numberof
AS-i masters
Description Draw-ingno.
Orderno.
1 SmartLink DP · AS-i gateway / Profibus DP · Full master functions · AS-i version 2.1 and 3.0 1 AC1375
1 SmartLink DP · AS-i gateway / Profibus DP · Full master functions · AS-i version 2.1 1 AC1335
2 AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · AS-i version 2.1 2 AC1326
2AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · AS-i version 2.1
and 3.0 2 AC1376
1 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions 2 AC1365
2 AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions 2 AC1366
1AS-i controller E · AS-i controller freely programmable · Profibus DP interface ·
Ethernet programming interface · Full master functions2 AC1355
2AS-i controller E · AS-i controller freely programmable · Profibus DP interface ·
Ethernet programming interface · Full master functions2 AC1356
1 AS-i Ethernet / IP Controller E · Full master functions 3 AC1327
2 AS-i Ethernet / IP Controller E · Full master functions 3 AC1337
1 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions – AC1331
2 AS-i CANopen Controller E · AS-i controller with CANopen interface · Full master functions – AC1332
1AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B ·
LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1)4 AC1401
2AS-i Profinet gateway · AS-i master · Ethernet configuration interface · Profinet RT device class B ·
LCD colour display · Device supply either via 24 V or AS-i (AS-i bus 1)4 AC1402
Bus system AS-interface
292Product selectors and further information can be found at: www.ifm.com
AS-i power supplies
Type OutputcurrentAS-i [A]
Description Draw-ingno.
Orderno.
2.8Power supply · DC convertor 24 V DC for AS-i system voltage · Integrated data decoupling ·
aluminium5 AC1207
2 x 4Power supply · AS-i dual power supply 115/230 V AC 2 x AS-i · Integrated data decoupling ·
aluminium6 AC1212
8Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate
the AS-i communication · 240 watts · aluminium / steel sheet galvanised7 AC1218
8Power supply · Three-phase AS-i power supply 400...500 V AC · Integrated data decoupling · Jumper
to deactivate the AS-i communication · 240 watts · aluminium / steel sheet galvanised8 AC1223
Insulation monitors
Type Description Draw-ingno.
Orderno.
AS-i insulation monitor · Detection of asymmetric insulation faults · Screw terminal 9 AC2211
AS-i insulation monitor · Detection of symmetric and asymmetric insulation faults · Screw terminal 9 AC2212
I/O modules for control cabinets
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 with
extended addressing mode · Digital inputs · Combicon connection · PA10 AC2250
4 inputsActive AS-i module · String mounting possible · Addressing socket · Input supply from external PELV voltage source · Version 2.1 with extended addressing mode ·
Digital inputs · Combicon connection · PA10 AC2254
4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 ·
Digital outputs · Combicon connection · PA10 AC2252
4 inputs / 3 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 withextended addressing mode · Digital inputs and outputs · Combicon connection · PA
10 AC2264
4 inputs / 4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 ·
Digital inputs and outputs · Combicon connection · PA10 AC2251
4 inputs / 4 outputs;bidirectional
Active AS-i module · String mounting possible · Addressing socket · External sensor supply PELV · Version 2.1 · Digital inputs and outputs · Combicon connection · PA
10 AC2257
Bus system AS-interface
293
Field modules IP67
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputsActive ClassicLine module · Version 2.11 and 3.0 with extended addressing mode ·Addressing socket · Three orientations of the flat cable are possible · Digital inputs ·
Sockets M12 x 1 · PA11 AC5215
4 outputsActive ClassicLine module · Addressing socket · Three orientations of the flat
cable are possible · Digital outputs · Sockets M12 x 1 · PA11 AC5208
4 inputs / 3 outputs;bidirectional
Active ClassicLine module · Addressing socket · Three orientations of the flat cable are possible · Version 2.11 and 3.0 with extended addressing mode · Digital
inputs and outputs · Sockets M12 x 1 · PA12 AC5204
2 pushbuttons / 2 LED displaysActive module upper parts AS-i illuminated pushbutton module · Power supply via AS-i
cable · Colour inserts changeable · PBT13 AC2086
4 inputsActive CompactLine module · IR addressing possible · Digital inputs ·
Sockets M12 x 1 · PA14 AC2410
4 inputsActive CompactLine module · IR addressing possible · Digital inputs ·
Sockets M12 x 1 · PA14 AC2457
4 inputs / 4 outputs;bidirectional
Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA
15 AC2412
4 inputs / 4 outputs;bidirectional
Active CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets M12 x 1 · PA
15 AC2459
Field modules IP69K and accessories
Type Inputs /outputs
Description Draw-ingno.
Orderno.
AS-i / 24 VFC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket ·
Metal parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM– E70354
Module lower parts
Type Inputs /outputs
Description Draw-ingno.
Orderno.
FC coupling moduleModule lower part flat cable · AS-i interface to module upper part ·
Quick mounting technology for AS-i flat cable · PBT16 AC5000
FC-E coupling module withexternal power supply
FC-E coupling module · AS-i interface to module upper part · Quick mounting technology for AS-i flat cable · PBT
16 AC5003
FC coupling moduleModule lower part flat cable · with addressing plug · AS-i interface to module
upper part · Quick mounting technology for AS-i flat cable · PBT17 AC5010
Bus system AS-interface
294Product selectors and further information can be found at: www.ifm.com
Type Inputs /outputs
Description Draw-ingno.
Orderno.
FC-E coupling module withexternal power supply
FC-E coupling module · with addressing plug · AS-i interface to module upper part · Quickmounting technology for AS-i flat cable · PBT
17 AC5011
Pneumatic and actuator solutions
Type Inputs /outputs
Description Draw-ingno.
Orderno.
4 inputs / 2 outputs; AirBoxsupply via AS-i
AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended
addressing mode · Addressing socket · PA / POM18 AC5228
4 inputs / 1 output ; AirBoxsupply via AS-i
AS-i AirBox · 5/2-way slide valve free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended
addressing mode · Addressing socket · PA / POM19 AC5246
4 inputs / 2 outputs; AirBoxsupply via AS-i
AS-i AirBox · 5/2-way bistable slide valve free from overlapping · Three orientations of theflat cable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended
addressing mode · Addressing socket · PA / POM18 AC5251
4 inputs / 2 outputs; AirBoxsupply via AS-i
AS-i AirBox · 5/3-way slide valve free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended
addressing mode · Addressing socket · PA / POM18 AC5270
Safety at Work
Type Description Draw-ingno.
Orderno.
AS-i safety monitor · Extended functionality · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal
20 AC003S
AS-i safety monitor · Extended functionality · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal
20 AC004S
AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and
setup by configuration software ASIMON V3.0 · Screw terminal · polyamide black21 AC031S
AS-i safety monitor · Extended functionality and integrated safe slave for triggering a safe AS-i output · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO 13849 - 1 PL e · Configuration and
setup by configuration software ASIMON V3.0 · Screw terminal21 AC032S
Illuminated E-STOP with integrated AS-i connection · Connector M12 x 1 · AS-i interface via AS-i flat cable IP 67 · fool-proof E-STOP to EN ISO 13850 / EN 418 · Pull to reset
22 AC010S
Fail-safe inductive sensor · GIMC-4030-US · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PPE / diecast zinc
23 GM504S
Fail-safe inductive sensor · GIMC-4035-US · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PPE / diecast zinc
23 GM505S
Fail-safe inductive sensor · GIGA-4015-US · M18 x 1 · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · cover: PBT / housing: high-grade stainless steel
24 GG505S
Bus system AS-interface
295
Type Description Draw-ingno.
Orderno.
Fail-safe inductive sensor · GIIA-4030-US · M30 x 1.5 · Complies with the requirements: · ISO 13849-1:2008 category 4 PL e · SIL 3 (IEC 61508) · Connector · PEEK / high-grade stainless steel
25 GI505S
AS-i sensors
Type Description Draw-ingno.
Orderno.
Read/write head · DTSLF AARWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · PA 26 DTA100
Read head · DTSLF AAROASUS01 · with integrated AS-i slave profile 7.3 · M12 connector · PA 26 DTA101
Combicon connectors
Type Description Orderno.
Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity: 6
E70230
Flat cable splitters and accessories
Type Description Orderno.
PAAS M12 · AS-i and external voltage via M12 socket · Sockets M12 x 1 · Housing materials: PA 6.6 / socket housing: stainless steel316L / 1.4404 / screws: stainless steel 316L / 1.4404 / O-Ring : Viton
E70188
FC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket · Housing materials: Metal parts: stainless steel 316L/ 1.4404 / Blanks: FPM / O-ring: EPDM
E70354
FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA 6-GF-FR / brass nickel-plated AC5005
FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA E70096
T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10802
T splitter · 2 way · Free from halogen · Free from silicone · gold-plated contacts · Housing materials: PUR E10803
Bus system AS-interface
296Product selectors and further information can be found at: www.ifm.com
Accessories Safety at Work
Type Description Orderno.
AS-i Safety at Work · ASIMON programming software · Version 3.0 · Configuration, set-up and diagnostics of the AS-i safetymonitor
E7040S
Connection cable PC / AS-i safety monitor · Parameter setting cable PC / AS-i safety monitor · Western connector RJ 45 8 poles / D-Sub socket 9 poles · 2.5 m
E7001S
EMERGENCY STOP label IP66 4 languages D,GB,F,I · EMERGENCY STOP label 4 languages for a safe illuminated EMERGENCY STOP button with integrated AS-i interface AC010S · 50 x 50 mm
E7003S
Accessories lower parts and addressing units
Type Description Orderno.
AS-i addressing unit · AS-i version 3.0 with extended addressing mode AC1154
Addressing cable · for AS-i slaves · 1.6 m E70213
Addressing cable · for the addressing of active AS-i compact modules E70423
Use of the lower part as branching box · Housing materials: plastics AC3000
AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules
AC4000
AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules
AC4002
Cable clip for fixing the AS-i flat cable · Housing materials: PA 6.6 · Pack quantity: 100 E70067
Bus system AS-interface
297
Accessories RFID
Type Description Orderno.
ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302
Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730
Scale drawings / drawing no. – CAD download: www.ifm.com
1
85
124
138
LED
62
4
6857
2
4
10797
86
124
131
LED
62
LED
3
4
10797
86
124
131
LED
62
LED
4
106,293
135,
512
8,2
Bus system AS-interface
298Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
513
4
50 112,5118,5
6
113118,5
134
120
7
4
10796
91
124
131
Jumper
LED
8
4
122111
129
124
131
LED
Jumper
9
74
22,5
78
110
35,5
10
105
35,5
25
114
LEDs
1
1: Addressing socket
11
Bus system AS-interface
299
Scale drawings / drawing no. – CAD download: www.ifm.com
12
13
4530
80
14
1 2
43
23274,
710
711
8,2
54,
5
28,539
7,5
60
M12x1
15
2327
1 2
4
6
8
3
5
7
4,7
107
152
28,539
7,5
60
54,
5
M12x1
16
80
206
35
66
31
9,65,3
457 7
77
17
80
206
35
66
31
9,65,3
45
7 7
77
1
1: Addressing socket
Bus system AS-interface
300Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
18
2
4
0
1
0
1
91
108
85
1 50
40
19
1 50
40
2
4
0
1
91
108
85
20
120
35,5
45
104
LED
21
45
105,
9
120
35,5
102
82,6
91,2
22
58,5
66,5
UU
UU
93,5
5610
5
M12
x1
72
80
23
40
M12
x1
4066
17
34
LED
4661
30 20
5,4
105,
4
6
8,5
33
24
M18
x1
55 10
M12
x1
90,5
LED 8 x 45°
79
424
Bus system AS-interface
301
Scale drawings / drawing no. – CAD download: www.ifm.com
25
LED 4 x 90°
69
39
M30
x1,5
5
67
80
36
M12
x1
15
26
5
2
41
4,517
56
17
4,25,5
M12 x1
24
5570
LED
2
1
53,5
1: integrated antenna , 2: tag positioning mark (middle of the antenna)
Bus system AS-interface
302Product selectors and further information can be found at: www.ifm.com
Bus system AS-interface
303
Identification systems
304
Identification systems
305
Multicode reading systems
System description / System overviewProduct selection chartWiring diagramsScale drawings / drawing no. – CAD download: www.ifm.com
306 - 307308 - 309
309310
RF-identification systems
System description / System overviewProduct selection chartScale drawings / drawing no. – CAD download: www.ifm.com
312 - 313314315
Orientation-independent identification of 1D and 2D codes.
Very small housing for flexible use.
Simple, menu-guided parameter setting.
Integrated lighting.
High reading reliability even with soiled / damaged codes.
Multicode reader
The ECC200 Data Matrix code is becoming more and more popular throughoutindustry alongside familiar barcodes. In this code lots of information can be storedin a very small space and read using the compact multicode reader. The industriallycompatible mounting and wiring technology as well as the standardised processinterfaces RS-232, Ethernet TCP/IP and EtherNet/IP enable easy and quick integra-tion into the industrial control technology. Applications can be found in manydifferent industrial areas: from the product tracking and production control to pro-duct identification.
Orientation-independent reading
Independent of the orientation and the number of codes, the high-performancealgorithms automatically decode 1D or 2D codes. The optimisation parameters ofthe codes and functions of the multicode reader undergo continuous developmentand are made available as upgrades.
Code comparison in the sensor
Complex application programming is no longer necessary due to adjustable,selective code identification and comparison in the sensor. This allows a definednumber of characters within a code to be checked and signalled via the switchingoutput if they match.
Reliable identification of 1D and 2D codes
In addition to the automatic exposure setting, manual adjustment is also possible.So optimum results are achieved even with highly reflective metal surfaces. Forevaluation of the code quality parameter, ISO / IEC 15415 or 16022 can be used.
The Data Matrix code
The Data Matrix code is a two-dimensional code containing much more informationwith the same structure size than codes such as bar codes or stacked codes. Severalthousand characters can be stored in one code.
An important feature of the Data Matrix code is the high reading reliability. If thecode is soiled or damaged, the intelligent system can completely recompose theinformation from different segments again. The Data Matrix code can be structureddifferently and is variable in shape and size. The size can cover 1 x 1 mm to100 x 100 mm.
Lose no time: Themulticode reader canbe configured in afew minutes and isthen ready for use.Only five guided stepsare necessary for themulticode reader tobe ready for opera-tion. Whether printed
on paper, graved bylaser or dot-peened
on metal: Reliabledetection of the code,
independent of thesensor orientation.
Identification systems
306
Selection chart Page
Multicode reader 308
Illumination units 308
Software 308
Fixing components 308 - 309
Protective panes and diffusers 309
Connection technology 309
Wiring diagrams 309
Scale drawings / drawing no. – CAD download: www.ifm.com 310
Multicode reading systems
307
Multicode reader
Type Dimensions
[mm]
Max.field of
view size[mm]
Typeof light
LED
Motion speedint. / ext. lighting
[m/s]
Processinterface
Draw-ingno.
Orderno.
M12 plug, 8 poles M12 socket, 4 poles · Connector groups 11, 12
60 x 42 x 53.5 68 x 50 red light 3 / 5Ethernet TCP/IP,
EtherNet/IP, RS-2321 O2I100
60 x 42 x 53.5 140 x 100 red light 3 / 5Ethernet TCP/IP,
EtherNet/IP, RS-2321 O2I102
60 x 42 x 59 400 x 300 red light 3 / 5Ethernet TCP/IP,
EtherNet/IP, RS-2322 O2I104
Illumination units
Type Dimensions
[mm]
Typeof light
Activeilluminated
area[mm]
I0normal light
intensity[mA]
I0high lightintensity
[mA]
Trigger Draw-ingno.
Orderno.
M12 connector · metal · DC · Wiring diagram no. 1 · Connector groups 7, 8
42 x 42 x 31 red – 180 90External; 24 V PNP to
IEC61131-13 O2D909
Software
Type Description Number ofconnections
Orderno.
Operating software · O2I · for multicode reader · Create and manage application-specific configurationsMonitor mode for set-up and service Service reports for statistical evaluations
– E2I200
Fixing components
Type Description Orderno.
Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp:stainless steel
E2D110
Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp:stainless steel
E2D112
clamp · Ø 14 mm; M12 · free-standing M12 · Housing materials: clamp: stainless steel E20948
Identification systems
308Product selectors and further information can be found at: www.ifm.com
Type Description Orderno.
mounting rod · Ø 12 / M10 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20938
mounting rod · Ø 12 / M10 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20940
mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939
mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941
Protective panes and diffusers
Type Description Orderno.
Plastic diffuser · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21165
Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168
Connection technology
Type Description Orderno.
Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898
Wiring diagrams
1
L+
L
1
4
2
3
1: Trigger, 2: Operatingmode “high light intensity”
Multicode reading systems
309
Scale drawings / drawing no. – CAD download: www.ifm.com
1
M12x1
2
19
M12x1
53,54,
3
20,5
44
19,7
33
145
24,5
42
57
8060
21
9,57
3
1: display, 2: Focus setting, 3: Centre of the lens axes
2
M12x1
2
19
M12x1
42
57
8060
21
9,57
3 59
4,3
20,5
49,5
25,238,5
1
45
24,5
1: display, 2: Focus setting, 3: Centre of the lens axes
3
31
4,3
14
30
LED
24M12 x1
54
LED
42
Identification systems
310Product selectors and further information can be found at: www.ifm.com
Multicode reading systems
311
Industrially compatible RFID solutions in 125 kHz.
Connection via AS-Interface (125 kHz).
All components integrated into industrially compatible housings.
High reading reliability even under difficult operating conditions.
Easy to mount and set up.
RF-identification systems
The constant increase of the degree of automation in modern production plants isincreasingly supported by identification systems. Their tasks include, for example,the control or release of production steps or the assignment of information abouteach product in logistics. RFID systems are an alternative for applications where anoptical identification, for example, cannot be used because of the operatingconditions.
Operating principle
The RFID system generates an electromagnetic field for reading and writing data.The electromagnetic field emitted by the antenna induces voltage in the passiveID tag. The activated ID tag (transponder) transmits the code to the fieldbus inter-face via the evaluation electronics.
125 kHz system with AS-Interface
ifm electronic supplies the first RFID system for AS-Interface (AS-i) worldwide. Itallows reading and writing of code carriers (ID tags), benefiting from the advan-tages of AS-i.
For reading, the system uses the AS-i analogue protocol 7.4 for data transfer.Special software modules are not required. Up to 31 read/write heads can be con-nected to one AS-i master. Antenna, electronics and AS-i interface are integrated ina compact housing. Voltage is supplied via AS-i. No additional operating voltagerequired.
The typical ranges of the 125 kHz system are some centimetres.
The ID tag providesflexibility for differenttypes of installation.
The ID tag is mountedto tanks or workpiece
carriers – in the tagfixture or alternatively
by direct mountingusing an M5 grub
screw.
Identification systems
312
Selection chart Page
RFID systems 314
ID tags 314
Fixing components 314
Scale drawings / drawing no. – CAD download: www.ifm.com 315
RF-identification systems
313
RFID systems
Type Dimensions
[mm]
Travel speedread / write
[m/s]
Processinterface
Draw-ingno.
Orderno.
M12 connector · Connector groups 7, 8
55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) write: only static AS-i 1 DTA100
55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) AS-i 1 DTA101
ID tags
Type Description Orderno.
ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302
Fixing components
Type Description Orderno.
Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:diecast zinc / Cube: diecast zinc
E20901
Mounting bracket · with integrated snap-on rail · for type IDC · Housing materials: stainless steel E10730
Mounting set · Clamp mounting · aluminium profile · for type OC · Housing materials: fixture: stainless steel 316Ti / 1.4571 / clamp:diecast zinc / Cube: diecast zinc
E20901
Identification systems
314Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
15
2
41
4,517
56
17
4,25,5
M12 x1
24
5570
LED
2
1
53,5
1: integrated antenna , 2: tag positioning mark (middle of the antenna)
RF-identification systems
315
International approval package andwide-range input for worldwide use.
Partly adjustable output voltage.
Power reserves to cover temporary overload or supply failure.
Output short-circuit, overload, andno-load protected.
State signalled via DC-ok output.
Power supplies
Transformer power supplies provide a low voltage, normally 24 V DC. A transformeraccording to DIN 0551 ensures a safe electrical separation from mains voltage andlow voltage. The output voltage can be regulated (± 5 %) or smoothed by means ofcapacitors. The different designs and output powers allow adaptation to diverseoperating conditions.
Switched-mode power supplies
Primary switched-mode power supplies are a compact and economical solution tosupply sensors and actuators. As opposed to conventional transformer powersupplies with regulated output voltage primary switched-mode power supplies needno heavy transformers so that there are fewer iron and copper losses. They aretherefore distinguished by a very high degree of efficiency of up to 92 %. Due tothe operating principle by means of high frequency transformers switched-modepower supplies are much smaller and lighter than transformer power supplies withidentical power. Nevertheless they guarantee an electrical separation. Furthermore,they offer a wide input voltage range as standard, e.g. 340 to 576 V AC. Thismakes them fit for worldwide use.
ifm switched-mode power supplies have a regulated output voltage of typ. 24 V DCwith a tolerance of ± 2 %. Apart from few exceptions the output voltage can be setbetween 24 V and 28 V to compensate for example for a voltage drop on longcables. Between no load and full load they ensure a stable supply voltage and thusoperational reliability in case of supply voltage fluctuations.
Power reserves
Mains fluctuations up to ± 15 % and mains interference are compensated for. Evenmains voltage dips of a few milliseconds are compensated for, the output voltage iscompletely maintained. An active inrushcurrent limitation reduces the inrush current via a fixed resistor which is bridgedafter start up.
The outputs are protected against short circuits and overload.
Suitable for theapplication: ifmprovides powersupplies in differentpower classes.
Power supplies
316
Selection chart Page
Power supplies / switching amplifiers with one output 318
Power supplies / switching amplifiers with 2 inputs and 2 outputs 318
Standard switched-mode power supplies, three phases 318
AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metal housing 318 - 319
AS-i switched-mode power supplies, single phase, SilverLine 319
AS-i dual switched-mode power supplies, single phase, SilverLine 319
AS-i switched-mode power supplies, three phases, SilverLine 319
Scale drawings / drawing no. – CAD download: www.ifm.com 319 - 321
Power supplies
317
Power supplies / switching amplifiers with one output
Type Current
[mA]
Output voltage
[V]
Nominal voltage
[V]
Output Draw-ingno.
Orderno.
max. 100 24 DC; ±5% 230 AC (47...63 Hz) relay (1 changeover contact) 1 DN0001
max. 100 24 DC; ±5% 110 AC (47...63 Hz) relay (1 changeover contact) 1 DN0012
Power supplies / switching amplifiers with 2 inputs and 2 outputs
Type Current
[mA]
Output voltage
[V]
Nominal voltage
[V]
Output Draw-ingno.
Orderno.
max. 300 24 V DC; ± 3 % 110...240 AC / -15 / +102 relays (1 changeover contact
per channel)2 DN0200
Standard switched-mode power supplies, three phases
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
5 24...28 DC (±2%) 3 x 400...500 AC > 16 89 3 DN2032
10 24...28 DC (±2%) 3 x 400...500 AC > 24 90 4 DN2033
20 24...28 DC (±2%)3 x 400...500 AC;
±15%> 11 92 5 DN2134
40 24...28 DC (±2%) 3 x 400...500 AC > 15 92.5 6 DN2035
30 24...28 DC (±2%) 3 x 400...500 AC > 10 93 7 DN2036
AS-i switched-mode power supplies, single phase, new ClassicLine design in a robust metalhousing
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
2.8 29.5...31.6 DC 100...240 AC 330 (230 V AC) 88 8 AC1236
Power supplies
318Product selectors and further information can be found at: www.ifm.com
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
4 29.5...31.6 DC 100...240 AC 195 (230 V AC / 24 V DC) 88 8 AC1244
AS-i switched-mode power supplies, single phase, SilverLine
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
2.8 29.5...31.6 DC 24 DC > 10 87 9 AC1207
8 29.5...31.6 DC 115 / 230 AC > 10 92 10 AC1218
AS-i dual switched-mode power supplies, single phase, SilverLine
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
2 x 4 2 x 29.5...31.6 DC 115 / 230 AC > 10 87 11 AC1212
AS-i switched-mode power supplies, three phases, SilverLine
Type Current
[A]
Output voltage
[V]
Nominal voltage
[V]
Mainsbuffering time
[ms]
Efficiencytyp.
[%]
Draw-ingno.
Orderno.
8 29.5...31.6 DC 3 x 400...500 AC 22 (400V) 91.5 12 AC1223
Scale drawings / drawing no. – CAD download: www.ifm.com
1
55
75
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
110
35,5
1
1: mounting on DIN rail
2
22,5
78
L+ L– I1
L N I2
12 14 11
2221 24
35,5
120
1
1: mounting on DIN rail
Power supplies
319
Scale drawings / drawing no. – CAD download: www.ifm.com
3
124
73
LED
131
4 122
103
4
4
121110
90
124
131
3
2
1
6
5
4
1: LED red, 2: reset push button, 3: jumper “overload performance”,4: jumper “single / parallel operation”, 5: with pot., 6: LED green
5
4 127
108
124
150
131
157
LED
6
89
4
107
124
275
131
282
LED
7
89
4
107
124
240
131
LED
247
Power supplies
320Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
8
136144
136
50
129
LED
9
134
50 112,5118,5
10
4
10796
91
124
131
Jumper
LED
11
113118,5
134
120
12
4
122111
129
124
131
LED
Jumper
Power supplies
321
Complete product range: sockets, plugs, jumper cables, splitter boxes.
Various cable materials for different applications.
High-quality materials for maximum reliability.
“ecolink” series with innovative quality features.
Integrated LEDs for easy diagnosis.
Connection technology
With a wide variety of different sensor designs ifm electronic offers a wide range ofhigh quality connectors. The choice of types covers common M8, M12, M18 typesthrough to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer addi-tional quality features.
ecolink - a new dimension in connection technology
Due to the special installation of a mechanical end stop the O-ring is alwayscorrectly compressed and so permanently maintains its sealing function. The con-nector remains securely positioned on the unit even in case of extreme vibrationand impacts. Novel design and a transparent black housing ensure that even inbright lighting conditions the LEDs are more clearly visible than with the cleartransparent versions.
For industrial applications:
High-quality materials suited to the requirements in industrial environments. Largelyresistant to oils, greases and coolants.
For hygienic and wet areas:
PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts arethe optimum choice for long life.
For hazardous areas
Connection technology for ATEX categories 2D, 3D and 3G. With the EC typeexamination certificate for components from DEKRA EXAM the connection tech-nology meets the strictest requirements.
For welding applications
Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated couplingnuts prevent weld spatter sticking. The cables are also suited for drag chains andtorsional movements.
For sensors in robust applications:
The saw tooth contoured vibration protection secures against strong shocks andvibrations. The high protection rating, wide temperature range and high-qualityhousing materials (high-grade stainless steel, TPU) ensure permanent safe con-nection in harsh environments.
Black, transparenthousing for optimumLED visibility.
Maximum operationalreliability due to the
new vibration protec-tion with end stop.
Connection technology
322
Selection chart Page
M8 sockets for industrial applications 324
M12 sockets for industrial applications 325 - 326
M18 sockets for industrial applications 326
M23 sockets for industrial applications 326 - 327
1/2" sockets for industrial applications 327
M8 cable plugs for industrial applications 327
M12 cable plugs for industrial applications 327 - 328
M8 - M8 jumpers for industrial applications 328
M8 socket - M12 plug jumpers for industrial applications 328 - 329
M12 - M12 jumpers for industrial applications 329
Valve - plug jumpers for industrial applications 330
Splitter boxes for industrial applications 330 - 331
Connectors weld slag resistant 331 - 332
Connectors for robust applications 332
Wiring diagrams 333 - 335
Scale drawings / drawing no. – CAD download: www.ifm.com 335 - 339
Connection technology
323
M8 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 1 · Socket M8, 3-pole, 3-wire · Wiring diagram no. 1
5 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 1 EVC142
10 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 1 EVC143
Group 2 · Socket M8, 3-pole, 3-wire, LED, PNP · Wiring diagram no. 2
2 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /yellow
2 EVC147
10 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /yellow
2 EVC149
Group 3 · Socket M8, 3-pole · Wiring diagram no. 3
wirable –PA /brass
60 AC75 DC
-25...90 IP68 – – E11552
Group 4 · Socket M8, 4-pole, 4-wire · Wiring diagram no. 4
2 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 3 EVC150
5 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 3 EVC151
Group 5 · Socket M8, 4-pole, 3-wire · Wiring diagram no. 4
5 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 4 EVC154
Group 6 · Socket M8, 4-pole · Wiring diagram no. 5
wirable –PA /brass
60 AC75 DC
-25...90 IP68 – – E11553
Connection technology
324Product selectors and further information can be found at: www.ifm.com
M12 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 7 · Socket M12, 4-pole · Wiring diagram no. 5
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 5 E11509
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 6 E11508
Group 8 · Socket M12, 5/4-pole, 4-wire · Wiring diagram no. 4
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 7 EVC004
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 7 EVC005
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC001
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC002
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 8 EVC003
Group 9 · Socket M12, 5/4-pole, 4-wire, LED, PNP · Wiring diagram no. 6
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow9 EVC007
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow9 EVC008
10 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow9 EVC009
Group 10 · Socket M12, 5-pole · Wiring diagram no. 7
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
125 AC/DC -25...85 IP68 – 10 E11511
Connection technology
325You can find wiring diagrams and scale drawings from page 333
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 11 · socket M12, 8-pole, 7-wire + screen · Wiring diagram no. 8
2 m blackPUR cable 7 x 0.25 mm2 + screen
TPU /diecast zinc
60 AC/DC -25...85 IP67 – 11 E20738
Group 12 · socket M12, 8-pole, 8-wire, for temperature sensors TR 8... · Wiring diagram no. 9
2 m blackPUR cable 8 x 0.25 mm2, Ø 6.2 mm
PUR /brass
30 AC36 DC
-25...80 IP68 – 12 E11231
5 m blackPUR cable 8 x 0.25 mm2, Ø 6.2 mm
PUR /brass
30 AC36 DC
-25...80 IP68 – 12 E11232
2 m blackPUR cable 8 x 0.25 mm2, Ø 6.2 mm
PUR /brass
30 AC36 DC
-25...80 IP68 – 13 E11950
5 m blackPUR cable 8 x 0.25 mm2, Ø 6.2 mm
PUR /brass
30 AC36 DC
-25...80 IP68 – 13 E11807
10 m blackPUR cable 8 x 0.25 mm2, Ø 6.2 mm
PUR /brass
30 AC36 DC
-25...80 IP68 – 13 E11311
M18 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 13 · Socket M18, 4-pole · Wiring diagram no. 5
wirable ...0.75 mm2 (Ø 6...8 mm) PA20...250AC/DC
-40...85 IP65 – 14 E10013
wirable ...0.75 mm2 (Ø 6...8 mm)PA /
ULTRAMID20...250AC/DC
-40...85 IP65 – 15 E10137
M23 sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 14 · Socket M23, 12-pole · Wiring diagram no. 10
15 m blackPUR cable
8 x 0.5 mm2 + 3 x1.0 mm2, Ø 9.3 mm
PUR /brass
250 AC/DC -25...80 IP67 – 16 E11741
Connection technology
326Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 15 · Socket M23, 19-pole · Wiring diagram no. 23
5 m blackPUR cable
16 x 0.5 mm2 + 3 x1.0 mm2, Ø 11.6 mm
PUR /brass
160 AC/DC -25...80 IP67 – 17 E11742
1/2" sockets for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 16 · socket 1/2“, 2-pole + PE, 3-wire · Wiring diagram no. 11
2 m yellowPVC cable
3 x AWG22, Ø 5.2 mmTPU /brass
250 AC300 DC
-25...90 IP67 – 18 E10190
5 m yellowPVC cable 3 x 0.34 mm2, Ø 5.2 mm
TPU /brass
250 AC300 DC
-25...90 IP67 – 18 E10200
M8 cable plugs for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 17 · Plug M8, 3-pole · Wiring diagram no. 12
wirable –PA /brass
60 AC75 DC
-25...90 IP68 – – E11550
M12 cable plugs for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 18 · Plug M12, 4-pole · Wiring diagram no. 13
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
250 AC/DC -25...85 IP68 – 19 E11504
Group 19 · Socket M12, 4-pole · Wiring diagram no. 5
wirable ...0.75 mm2 (Ø 6...8 mm)PBT (Pocan) /stainless steel316L / 1.4404
125 AC150 DC
-40...85 IP68 – 20 E11252
Connection technology
327You can find wiring diagrams and scale drawings from page 333
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 20 · Plug M12, 5-pole · Wiring diagram no. 14
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
125 AC/DC -25...85 IP68 – 21 E11507
wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass
125 AC/DC -25...85 IP68 – 22 E11506
M8 - M8 jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 21 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 4-wire · Wiring diagram no. 15
1 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 23 EVC302
Group 22 · Jumper , plug: M8, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 15
2 m blackPUR cable 4 x 0.25 mm2, Ø 3.7 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 24 EVC313
M8 socket - M12 plug jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 23 · Jumper , plug: M12, 3-pole, socket: M8, 3-pole, 3-wire · Wiring diagram no. 16
0.3 m blackPUR cable 3 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 25 EVC215
Group 24 · Jumper , plug: M12, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 15
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 26 EVC238
0.3 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 27 EVC240
0.6 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 27 EVC241
Connection technology
328Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 24 · Jumper , plug: M12, 4-pole, socket: M8, 4-pole, 3-wire · Wiring diagram no. 15
1 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 27 EVC242
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
50 AC60 DC
-25...90IP67 / IP68 /
IP69K– 27 EVC243
M12 - M12 jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 25 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire · Wiring diagram no. 15
0.6 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 28 EVC016
1 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 29 EVC012
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 29 EVC013
Group 26 · Jumper , plug: M12, 4-pole, socket: M12, 5-pole, 4-wire, LED · Wiring diagram no. 17
0.3 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow30 EVC020
0.6 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow30 EVC021
1 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow30 EVC022
2 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow30 EVC023
5 m blackPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow30 EVC024
Group 27 · Jumper , plug: M12, 5-pole, socket: M12, 5-pole, 5-wire · Wiring diagram no. 18
5 m blackPUR cable 5 x 0.34 mm2, Ø 4.9 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 31 EVC059
Connection technology
329You can find wiring diagrams and scale drawings from page 333
Valve - plug jumpers for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 28 · Jumper , plug: M12, 3-pole, valve plug: Housing A, 4-pole, 3-wire, LED · Wiring diagram no. 19
0.3 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm
PUR /brass
24 AC/DC -25...80 IP67 yellow 32 E11416
0.6 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm
PUR /brass
24 AC/DC -25...80 IP67 yellow 32 E11417
1 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm
PUR /brass
24 AC/DC -25...80 IP67 yellow 32 E11418
2 m blackPUR cable 3 x 0.5 mm2, Ø 5 mm
PUR /brass
24 AC/DC -25...80 IP67 yellow 32 E11419
Splitter boxes for industrial applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 29 · splitter box M8, 4-pole · Wiring diagram no. 24
10 m blackPUR cable
16 x 0.34 mm2 + 2 x0.75 mm2, Ø 9.1 mm
PBT-GF 20 10...30 DC -25...90 IP68green /
16 x yellow33 E11218
Group 30 · M12 splitter box for 1 signal · Wiring diagram no. 20
5 m blackPUR cable 4 x 0.25 mm2, Ø 5 mm
TPU /brass
10...55 DC -25...80 IP67 – 34 E10437
Group 31 · M12 splitter box for 1 signal · Wiring diagram no. 25
10 m blackPUR cable
4 x 0.34 mm2 + 3 x 1 mm2,Ø 7.5 mm
PA 10...30 DC -25...80 IP67green /
4 x yellow35 EBC027
Group 32 · M12 splitter box for 1 signal · Wiring diagram no. 26
5 m blackPUR cable
6 x 0.34 mm2 + 3 x 1 mm2,Ø 7.8 mm
PA 10...30 DC -25...80 IP67green /
6 x yellow36 EBC019
10 m blackPUR cable
6 x 0.34 mm2 + 3 x 1 mm2,Ø 7.8 mm
PA 10...30 DC -25...80 IP67green /
6 x yellow36 EBC031
Connection technology
330Product selectors and further information can be found at: www.ifm.com
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 33 · M12 splitter box for 1 signal · Wiring diagram no. 27
10 m blackPUR cable
8 x 0.34 mm2 + 3 x0.75 mm2, Ø 8.2 mm
PA 10...30 DC -25...80 IP67green /
8 x yellow37 EBC035
Group 34 · M12 splitter box for 1 signal · Wiring diagram no. 28
10 m blackPUR cable
16 x 0.34 mm2 + 3 x0.75 mm2, Ø 9.7 mm
PA60 AC75 DC
-25...80 IP67 – 38 EBC034
Group 35 · M12 splitter box for 2 signals · Wiring diagram no. 29
10 m blackPUR cable
16 x 0.34 mm2 + 3 x1.0 mm2, Ø 9.7 mm
PA 10...30 DC -25...80 IP67green /
16 x yellow39 EBC036
Group 36 · M12 splitter box for 2 signals · Wiring diagram no. 30
M23 connector – PA 10...30 DC -25...80 IP67green /
16 x yellow40 EBC012
Connectors weld slag resistant
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 37 · Socket M12, 4-pole, 4-wire · Wiring diagram no. 4
2 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 41 EVW004
5 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 41 EVW005
10 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 41 EVW006
2 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 42 EVW001
5 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 42 EVW002
10 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
250 AC300 DC
-25...90IP67 / IP68 /
IP69K– 42 EVW003
Connection technology
331You can find wiring diagrams and scale drawings from page 333
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 38 · Socket M12, 4-pole, 4-wire, LED, PNP · Wiring diagram no. 6
2 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow43 EVW007
5 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow43 EVW008
10 m greyPUR cable 4 x 0.34 mm2, Ø 4.9 mm
TPU /brass
10...36 DC -25...90IP67 / IP68 /
IP69Kgreen /
2 x yellow43 EVW009
Group 39 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 21
2 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 7 EVW013
5 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 7 EVW014
10 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 7 EVW015
Group 40 · Socket M12, 5-pole, 5-wire · Wiring diagram no. 21
2 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 8 EVW010
5 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 8 EVW011
10 m greyPUR cable 5 x 0.34 mm2, Ø 5.1 mm
TPU /brass
30 AC36 DC
-25...90IP67 / IP68 /
IP69K– 8 EVW012
Connectors for robust applications
Type Cable Wirespecification
Materialhousing/
nut
U
[V]
Ta
[°C]
Pro-tection
LEDs Draw-ingno.
Orderno.
Group 41 · Jumper M12, 5-pole, 5-wire · Wiring diagram no. 22
1 m blackPUR cable
2 x 0.25 mm2 + 3 x0.34 mm2, Ø 6.8 mm
TPU /brass
30 AC36 DC
-40...90 IP67 / IP69K – 44 E11592
10 m blackPUR cable
2 x 0.25 mm2 + 3 x0.34 mm2, Ø 6.8 mm
TPU /brass
30 AC36 DC
-40...90 IP67 / IP69K – 44 E11595
Connection technology
332Product selectors and further information can be found at: www.ifm.com
Core colours
BK black
BN brown
BU blue
WH white
GN green
GY grey
PK pink
YE yellow
screen screen
OG orange
VT lilac
RD red
RD/BK red/black
RD/WH red/white
GN/YE green/yellow
Wiring diagrams
1
1
3
BN
BU
4 BK
2
1
3
L+
4
L
YE GN
BN
BU
BK out
3
1
3
4
4
1
2
3
4
BN
WH
BU
BK
5
1
2
3
4
6
out
out
L+
L
1
3
4
YE GN
BN
BU
BK
2 WH
YE
7
1
2
3
4
5
8
4
5
6
7
8
2
3
1
YE
GY
PK
BU
screen
BN
GN
WH
9
4
5
6
7
8
2
3
1
BK
GY
PK
VT
OG
WH
BU
BN
10
4
5
6
7
8
2
3
1
GY
GY/PK
RD/BU
WH/GN
BN/GN
GN
YE
WH
9
10
11
12
BU
BN
YE/GN
11
1
2
3
GN
RD/BK
RD/WH
12
1
3
4
13
1
2
3
4
14
1
2
3
4
5
15
1
2
3
1
2
3
4 4
16
1
3
4
1
3
4
17
out
out
L+
L
1
3
4
GN YE
2
1
3
4
2
YE
18
1
2
3
4
1
2
3
4
5 5
19
1
2
YE4
3
5
20
BN
BU
BK
WH
1 (1...2)
3 (1...2)
4 (1)
4 (2)
21
1
2
3
4
5
BN
WH
BU
BK
GY
22
1
2
3
4
1screen
2
3
4
5 5
RD
BK
WH
BU
Connection technology
333
Wiring diagrams
23
4
5
6
7
8
2
3
1
RD/BU
GN
BU
GY/PK
WH/GN
RD
GY
VT
9
10
11
12
WH/YE
WH/GY
BK
GN/YE
13
14
15
YE/BN
BN/GN
WH
16
17
18
19
YE
PK
GY/BN
BN
24
BN
WH
GN
GY/PK
1 (1...8)
4 (1)
2 (1)
4 (2)
2 (2)
YE
GN
RD/BU
4 (3)
2 (3)
YE
WH/GN
4 (4)
2 (4)
GY
BN/GN
+
-BU 3 (1...8)
4 (5)
2 (5)
PK
WH/YE
4 (6)
2 (6)
RD
YE/BN
4 (7)
2 (7)
BK
WH/GY
4 (8)
2 (8)
VT
GY/BN
25
1
GN
2
1 (1...4)
3 (1...4)
4 (1)
4 (2)
4 (3)
4 (4)
YE
3
4
+
-
-
10
9
11
5 (1...4)12
26
BN
WH
GN/YE
GN
GN
1 (1...6)
5 (1...6)
4 (1)
4 (2)
4 (3)
4 (4)
YE
YE
GY
4 (5)
4 (6)
PK
RD
+
-BU 3 (1...6)
27
WH
GN
GN
1 (1...8)
3 (1...8)
4 (1)
4 (2)
4 (3)
4 (4)
YE
YE
GY
+
- BU
BN
4 (5)
4 (6)
PK
RD
4 (7)
4 (8)
BK
VT
5 (1...8)GN/YE
28
GY/PK
RD/BU
WH/GN
BN/GN
WH
BU
GN/YE
BN
2 (1)
2 (2)
2 (3)
2 (4)
4 (1)
3 (1...8)
5 (1...8)
1 (1...8)
WH/YE
YE/BN
2 (5)
2 (6)
WH/GY
GY/BN
2 (7)
2 (8)
GN
YE
GY
PK
RD
4 (2)
4 (3)
4 (4)
4 (5)
4 (6)
BK
VT
4 (7)
4 (8)
Connection technology
334Product selectors and further information can be found at: www.ifm.com
Wiring diagrams
29
GN
1 (1...8)
5 (1...8)
4 (1)
2 (1)
4 (2)
2 (2)
YE
4 (3)
2 (3)
4 (4)
2 (4)
+
-3 (1...8)
4 (5)
2 (5)
4 (6)
2 (6)
4 (7)
2 (7)
4 (8)
2 (8)
PK
WH/YE
RD
YE/BN
BK
WH/GY
VT
GY/BN
BN
WH
GN/YE
GY/PK
GN
RD/BU
YE
WH/GN
GY
BN/GN
BU
30
19
15
12
GN
7
1 (1...8)
5 (1...8)
4 (1)
2 (1)
4 (2)
2 (2)
YE
5
4
4 (3)
2 (3)
16
8
4 (4)
2 (4)
3
14
+
-6 3 (1...8)
4 (5)
2 (5)
17
9
4 (6)
2 (6)
2
13
4 (7)
2 (7)
11
10
4 (8)
2 (8)
1
18
Scale drawings / drawing no. – CAD download: www.ifm.com
1
9
10 31
M8x1 1
4
3
2
9
10 19
M8x1 25,5
LED1
4
3
3
9
10 31
M8x1
4
3
2
1
4
9
10 19
M8x1 25,5
4
3
2
1
5
35
18
20
M12 x1
30
3
1 2
4
6
18
M12 x1
46
3
1 2
4
Connection technology
335
Scale drawings / drawing no. – CAD download: www.ifm.com
7
15,5
M12x1 36,5
26,5
14 3
1 2
4
5
8
15,5
M12x1 45
14
3
1 2
4
5
9
15,5
M12x1 36,5
26,5
143 LED 3
1 2
4
5
10
20
M12 x1
46
3
1 2
4
5
11
13Ø14,5
43,9M12x1
4
1 2
65
378
12
15
38
M12 x1
28
10,5
4
1 2
65
378
13
15
M12 x1
43
4
1 2
65
378
14
25
M18 x1
36
21
43
21
3
1 4
2
15
25
M18 x1
56
3
1 4
2
16
51
70
26
M 23 x1
9 81127
6511
1023
4
17
26
M 23 x1
851
234
56 7
89
101112
13
14
15
16
17
1819
18
27
10,5
15
39
G 21
3
1
2
Connection technology
336Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
19
5220
M12 x1
43
2 1
20
19
M12 x1
31
39
18
3
1 2
4
21
42
18
15
20
M12 x1
31
4
2 1
3
5
22
5220
M12 x14
2 1
3
5
23
M8x1
9M8x1
1010
10
25,536 L
9
19
2
1
4
34
3
2
1
24
9M8x1 9M8x1 9 M8x1
1010 10
3136 L
2
1
4
34
3
2
1
25
L
9
49,5
14
M12
x1
M8x1
10
31
4
1
3 1
4
3
26
M8x110
25,5L
9
19
49,5
14
M12
x1
43
2 1 4
3
2
1
27
L
9
49,5
14
M12
x1
M8x1
10
31
43
2 1 4
3
2
1
28
49,5
14
L
15,5
M12x1
M12x1
26,5
14
36,5
15,5
43
2 1
3
1 2
4
5
29
49,5
14
15,5
M12x1
45
14
L
15,5
M12x1
43
2 1
3
1 2
4
5
30
49,5
14
L
15,5
M12x1
M12x1
26,5
14
36,5
15,5
LED
43
2 1
3
1 2
4
5
Connection technology
337
Scale drawings / drawing no. – CAD download: www.ifm.com
31
49,5
14
15,5
M12x1
45
14
L
15,5
M12x1
4
2 1
3
5
3
1 2
4
5
32
L 17,5 29,5
29,5
M12
x1
47
LED
M 3
28,5
435 2 1
33
145 12
9
4,5
4,5
8,51821
11,5
M8x1
LED
129
4,5
26
4
3
2
1
34
10,423,5
17
53
6,5
1630
,542
3
1 2
4
35
1 2
43
PWR
18224,
773
118,
234
55
4,5
28,539
7,5
60
M12x1
3
1 2
4
5
36
1 2
4
6
3
5
PWR
18224,
773
125
34
55
4,5
28,539
7,5
60
M12x1
3
1 2
4
5
37
1 2
4
6
8
3
5
7
PWR
18224,
773
152
34
55
4,5
28,539
7,5
60
M12x1 3
1 2
4
5
Connection technology
338Product selectors and further information can be found at: www.ifm.com
Scale drawings / drawing no. – CAD download: www.ifm.com
38
1 2
4
6
8
3
5
7
18224,
773
152
34
55
4,5
28,539
7,5
60
M12x1 3
1 2
4
5
39
1 2
4
6
8
3
5
7
PWRB
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
18224,
773
152
34
55
4,5
28,539
7,5
60
M12x1 3
1 2
4
5
40
1 2
4
6
8
3
5
7
PWRB
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
1833
4,7
7315
234
55
4,528,5
397,5
60
M23 x 1
M12x1
123
4567
8
910
11 12
13
14
15
16
17
1819
3
1 2
4
5
41
15,5
M12x1 36,5
26,5
14 3
1 2
4
42
15,5
M12x1 45
14
3
1 2
4
43
15,5
M12x1 36,5
26,5
143 LED 3
1 2
4
44
43
M12
x1
47 L
M12
x1
4
2 1
3
5
3
1 2
4
5
Connection technology
339
ifm – worldwideaddresses
340
Argentinaifm electronic s.r.l.Manuela Sáenz 3235º piso, oficina 3C1107BPA – Puerto MaderoBuenos Aires, ArgentinaTel. (011) 5353-3436Fax (011) 5353-3436Interior 0810-345-3436info.ar@ifm.comwww.ifm.com/ar
Australiaifm efector pty ltd.P.O. Box 4084Suite 3, 745 Springvale RoadMulgrave VIC 3170Tel. 1300 365 088Fax 1300 365 070sales.au@ifm.comwww.ifmefector.com.au
Austriaifm electronic gmbhWienerbergstraße 41Gebäude E1120 ViennaTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 10info.at@ifm.comwww.ifm.com/at
BangladeshSensotec AutomationRed Crescent Chamber87, Motijheel CommercialAreaDhaka 1000BangladeshTel. +880 171 546 890sensotec@agni.com
BelarusDEPOSIT INVESTJoint-Stock CompanyBlock 2, 27 Zheleznodorovhnaya street220089 MinskRepublic of BelarusTel. +375-17-270 75 06Fax +375-17-270 75 07george_ozerov@infonet.by
Belgium andLuxembourgifm electronic n.v./s.a.Zuiderlaan 911731 ZellikTel. +32 2 481 0220Fax +32 2 463 1795info.be@ifm.comwww.ifm.com/be
BoliviaBAVARIA S.R.L.Álvaro Baptista VargasZona Morocollo, Urb. Santos PariamoC. Mario Diaz de medina (26-A), Nr. 32La Paz - BoliviaTel.: 00-591-2-277 13 78Mobile: 00-591-720-47 442alvarobaptista@bavaria.bowww.bavaria.bo
Brazilifm electronic Ltda.Rua Eleonora Cintra, 140Jardim Analia Franco03337-000 Sāo Paulo/SPTel. +55-11-2672-1730Fax +55-11-2673-3501info.br@ifm.comwww.ifm.com/br
Bulgariaifm electronic eoodul. Slatinska Nr. 92 A, ap. 2/31574 SOFIATel. +359 2 807 59 69Fax +359 2 807 59 60info.bg@ifm.com
Canadaifm efector Canada Inc. 700 Dorval Drive/CorporateCentreOakville; L6K3V3 OntarioTel. +1-800-441-8246 Fax +1-800-329-0436info@ifmefector.cawww.ifmefector.ca
ChileElectronica IndustrialSchädler y Cia. Ltda.Av. Antonio Varas 1871Providencia6641545 SantiagoTel. +56 / 2 / 274 74 30Fax +56 / 2 / 204 93 38info@schadler.comwww.schadler.com
Chinaifm electronic (Shanghai) Co., LtdBuilding 15, No 912Bi Bo Road, Pu Dong DistrictShanghai 201210, ChinaTel. +86-21-50278559 Fax +86-21-50278669Fax +86-21-50800213info.cn@ifm.com www.ifm.com/cnifm electronic (HK) LtdUnit 2106, 21/F, Tower 2, MetroplazaNo. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong.Tel. +852 3528-0462Fax +852 3697-0222info.hk@ifm.comwww.ifm.com/hkifm electronic (Taiwan) Limited2C, Bao-Cheng Enterprise Tower,No. 6 Mincyuan Second Road,Cianjhen District, Kaohsiung City,Postal Code 806, Taiwan, R.O.C.Tel. +886-7-335-7778Fax +886-7-335-6878info.tw@ifm.comwww.ifm.com/tw
ColumbiaSENSOMATIC Y CIA LTDA.CALLE 1 C 25a - 50BOGOTA D.C. COLOMBIATel. +57 313 430 2264Tel. +57 1 407 96 96info@sensomatic-ltda.comwww.sensomatic-ltda.com
Croatiaifm electronic gmbhWienerbergstr. 41Gebäude EA-1120 WienTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 10info.hr@ifm.comwww.ifm.com/hr
Czech Republicifm electronic spol.s.r.o.U Křížku 571252 43 PragueTel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 info.cz@ifm.comwww.ifm.com/cz
Denmarkifm electronic a/sRingager 4A, 1.sal tv.2605 BrøndbyTel. +45 70 20 11 08Fax +45 70 20 11 09info.dk@ifm.comwww.ifm.com/dk
Dominican RepublicWECH AUTOCONTROLES S. A.Ave. Romulo Betancourt 2158 Edificio WechUrb. RenacimientoSanto DomingoDominican RepublicTel.: + 1 809-531-0550Fax: + 1 809-531-9175wech@verizon.net.dowww.wechautocontroles.com.do
EcuadorINSELEC CIA. LTDA.Av. de los AruposE1-202 y Pan. Norte- Km 5 ½QuitoTel. +593 2 28074- 76 - 78Fax +593 2 2807475inselec@inselec.com.ecwww.inselec.com.ec
EgyptEgyptian Establishment forElectromechanical SuppliesMr. Ahmed Gouda27 Al-Salam StreetAl Arezona, Al Haram RoadGiza 12111, CairoTel. +20 / 2 / 586 49 49Fax +20 / 2 / 586 49 49Mobile +20 10 10 61 791ahmed_gouda97@yahoo.com
EstoniaPesmel Estonia LTDSegu 476505 SaueEstoniaTel.: +372 674 73 30 Fax: +372 674 73 31pesmel@pesmel.eewww.pesmel.ee
Finlandifm electronic oyVaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 info.fi@ifm.comwww.ifm.com/fi
Franceifm electronicSiège :Savoie Technolac BP22673374 Le Bourget du LacAgence commerciale :Immeuble Uranus1-3 rue Jean Richepin93192 NOISY LE GRANDCEDEXTél: 0820 22 30 01Fax: 0820 22 22 04info.fr@ifm.comwww.ifm.com/fr
Germanyifm electronic gmbhFriedrichstr. 145128 EssenTel. +49 201 24 22 0Fax +49 201 24 22 12 00info@ifm.comwww.ifm.com/de
Greeceifm electronic monoprosopi E.P.E.27, Andrea Papandreou Street15125 AmaroussiGreeceTel. +30 210 61 800 90Fax +30 210 61 994 00info.gr@ifm.comwww.ifm.com/gr
HondurasR y D INDUSTRIALBo. Paz Barahona11 Ave. 14 y 15 CalleS.O. #142San Pedro SulaTel. +504 5503703Fax +504 5501108ramonmorales@sulanet.net
Hungaryifm electronic kft.Szent Imre út 59. I.em.H-9028 GyőrTel. +36-96 / 518-397Fax +36-96 / 518-398info.hu@ifm.comwww.ifm.com/hu
Indiaifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 88info@ifm-electronic.inwww.ifm.com/in
IndonesiaPT Indoserako SejahteraJl. P. Jayakarta 121 No. 5910730 Jakarta PusatTel. +62 / 21 6 24 8923Fax +62 / 21 6 24 8922iso297@dnet.net.id
Irelandifm electronic (Ireland) Ltd.No. 7, The CourtyardKilcarbery Business ParkNew Nangor RoadClondalkinDublin 22Tel. +353 / 1 / 413 60 66Fax +353 / 1 / 457 38 28sales_ie@ifm.comwww.ifm.com/ie
IsraelAstragal Ltd.3, Hashikma Str.Azur 58001P.O. Box 99Azur 58190Tel. +972 / 3 / 5 59 16 60Fax +972 / 3 / 5 59 23 40astragal@astragal.co.ilwww.astragal.co.il
Italyifm electronicCentro Direzionale ColleoniPalazzo Andromeda 2Via Paracelo n° 1820041 Agrate Brianza (Milano)Tel. +39 / 039 68 99 982Fax +39 / 039 68 99 995info.it@ifm.comwww.ifm.com/it
Japanefector co. ltd.Chiba Higashi Techno Green Park2-9-20 OkayamadaiTogane-shi, Chiba 283-0826Tel. +81 / 475 50 3003Fax +81 / 475 50 3013ifm-j@efector.co.jpwww.ifm.com/jp
JordanAl Mashreqan Trading SuppliesP.O.Box.85105411185 SwaifiehAmman - Jordan.Tel. +962 6 581 8841Fax +962 6 581 8892info@mashreqan.com
ifm – worldwideaddresses
341
Koreaifm electronic Ltd.2F Hyundai Liberty House #201Hannam-Dong 258,Yongsan-Gu,Seoul, KoreaTel. +82 2-790-5610Fax +82 2-790-5613info.kr@ifm.comwww.ifm.com/kr
LatviaEC SystemsKatlakalna Str. 4A1073 RigaLatviaTel.: +371 724 1231Fax: +371 724 8478alnis@ecsystems.lvwww.ecsystems.lv
LebanonMiddle East DevelopmentCo. SAL (MEDEVCO)Medevco Building Jeita Main Road Jeita - Kesrouan LebanonMail address :P.O.Box 67 Jounieh LebanonTel. +961-9-233550 Fax +961-9-233554 info@medevco-lebanon.com
LithuaniaElinta UABTerminalo g. 3, Biruliškių k.,Karmėlavos sen.LT-54469 Kauno raj. (Kauno LEZ)LithuaniaTel.: +370 37 351 999Fax: +370 37 452 780sales@elinta.ltwww.elintosprekyba.lt
Malaysiaifm electronic Pte. LtdMalaysian Branch OfficeNo. 2-4-2, Fourth FloorTower 2 @ PFCC, Jalan Puteri 1/2,Bandar Puteri Puchong,47100 Puchong, Selangor.Tel. +60 / 3 / 8063 9522Fax +60 / 3 / 8063 9524sales_my@ifm.comifm electronicAsia Regional OfficeNo. 21, Jalan Kemunting,Taman Kebun The80250 Johor BahruJohor, West MalaysiaTel. +60 / 7 / 332 5022Fax +60 / 7 / 332 1577sales_my@ifm.com
Mexicoifm efector S. de R.L. de C.V.Anillo Periférico, 1816-1Col. Hacienda San JerónimoMonterrey, N.L.Mexico 64630Tel. +52-81-8040-3535Fax +52-81-8040-2343www.ifmefector.mx
Netherlandsifm electronic b.v.Deventerweg 1 E3843 GA HarderwijkTel. +31 / 341 438 438Fax +31 / 341 438 430info.nl@ifm.comwww.ifm.com/nl
New Zealandifm efector pty ltd.Unit B, 20 Cain RoadPenrose, AucklandTel. +64 / 95 79 69 91Fax +64 / 95 79 92 82sales.nz@ifm.comwww.ifm.com/nz
NigeriaAutomated Process Ltd3rd Floor, 32 Lagos AbeokutaExpresswayNear Cement Bus StopDopemu, AgegeLagos State, NigeriaTel. + 234 / 01 / 4729 967Fax + 234 /01 / 4925 865sales@automated-process.comwww.automated-process.com
NorwaySiv.Ing. J.F.Knudtzen ASBillingstadsletta 971396 BillingstadPostboks 1601378 NesbruTel. +47 / 66 98 33 50Fax +47 / 66 98 09 55firmapost@jfknudtzen.nowww.jfknudtzen.no
OmanTechnical Engineering Company LLC.P.O. Box 59 Madinat Al Sultan QaboosPostal Code 115 Sultanate of OmanTel. +968 24503593Fax +968 24503573tecoman@omantel.net.om
PakistanAB AutomationShop No.2. Rubab ChamberM.A. Jinnah RoadOff Sarai RoadKarachiTel. +92 / 21 / 2412 278Fax +92 / 21 / 2422 277abauto@cyber.net.pk
Perudekatec s.a.c.Los Calderos 188Urb. Vulcano, AteLima / PeruTel. +511 / 348 0293Tel. +511 / 348 0458Tel. +511 / 348 2269Fax +511 / 349 0110dkleffmann@dekatec.com.pewww.dekatec.com.pe
PhilippinesGram Industrial, Inc.Unit 402 & 410 CommonGoal TowerFinance cor., Industry St.,Madrigal Business Park AyalaAlabangMuntinlupa City 1770Telephone: 632-8502218/8508496Fax: 632-8077173 / 8503055efector@gram.com.ph
Polandifm electronic Sp.z o.o.ul. Kosciuszki 175PL 40-524 KatowiceTel. +48 / 32 / 60 87 454Fax +48 / 32 / 60 87 455info.pl@ifm.comwww.ifm.com/pl
Portugalifm electronic –Sucursal em PortugalAvenida da Republica 25034430-208 Vila Nova de GaiaTel. +351 / 22 / 37 17 108Fax +351 / 22 / 37 17 110info.pt@ifm.comwww.ifm.com/pt
Romaniaifm electronic s.r.l.Str. Cristian Nr. 5550073 SibiuTel.: 0040 269 224550Fax: 0040 269 224766info.ro@ifm.com
Russiaifm electronicIbragimova, 31, k.50office 607105318 MoscowTel.: +7 (495) 921-44-14Fax: +7 (495) 651-82-97info.ru@ifm.comwww.ifm.com/ru
Saudi ArabiaNoor Al-Shomoe for Electric & MaintenanceKing Khalid Street, Cross 5P.O. Box 2571Al-Khobar 31952Kingdom of Saudi ArabiaTel. +9 663 864 49 58Fax +9 663 894 63 41h.o.info@nooralshomoe.com
Singaporeifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 60sales_sg@ifm.comwww.ifm.com/sg
Slovakiaifm electronic spol. s.r.o.Rybnicna 40831 06 BratislavaTel. +421 / 2 / 44 87 23 29Fax +421 / 2 / 44 64 60 42info.sk@ifm.comwww.ifm.com/sk
South Africaifm electronic (pty) LtdShorrok HouseRoute 21 Corporate ParkNellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279Private bag X8Elardus Park0047Tel. +27 (0) 861 IFM RSA /436 772Fax +27(0)12 450 0322info.za@ifm.comwww.ifm.com/za
Spainifm electronic s.l.Edificio Prima Muntadas AParc Mas BlauC/Berguedà 108820 El Prat de LlobregatTel. +34 / 93 / 479 30 80Fax +34 / 93 / 479 30 86info.es@ifm.comwww.ifm.com/es
Swedenifm electronic abHallavägen 10 512 60 Överlida Office Gothenburg:Drakegatan 641250 GothenburgTel. +46 / 325 / 66 15 00 Tel. +46 / 325 / 66 15 50Fax +46 / 325 / 66 15 90info.se@ifm.comwww.ifm.com/se
Switzerlandifm electronic agAltgraben 274624 HärkingenTel. +41 / 62 / 388 80 30Fax +41 / 62 / 388 80 39info.ch@ifm.comwww.ifm.com/ch
SyriaI.E.C. Industrial Engineering CenterP.O. Box 15 Sehnaya, DamascusSyriaTel. + 963 11 532 13 19Fax. + 963 11 442 12 27info@iec-automation.com
ThailandSang Chai Meter Co., Ltd.694/16-19 Phaholyothin RoadSamsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051Fax +66 / 2 / 616 8050scmth@ksc.th.com
Turkeyifm electronic Elektrikli veElektronik Aletlerİth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbulTel. +90 / 212 / 210 5080Fax +90 / 212 / 221 7159info.tr@ifm.comwww.ifm.com/tr
Ukrainaifm electronicMariny Raskovoj 1102660 KievUkraineTel. +380 44 501 8543Fax +380 44 501 8543info.ua@ifm.comwww.ifm.com/ua
United Arab EmiratesNoor Al-Shomoe Electrical Equipments Est.P.O.Box. 64052Unit no. 36Reef Real EstateJebel Ali Industrial Area no. 3DubaiUnited Arab Emirates.Tel. +971 4 880 3838Fax +971 4 880 3883Mobile +971 505084834alshomoe@emirates.net.aewww.nooralshomoe.comUnited Arab Emirates –Abu DhabiAl Injazat Technical Trading ServicesP.O. Box 42895Abu DhabiUnited Arab EmiratesTel. +971 2 622 6030Fax +971 2 622 3050kamran@injazat.ae
United Kingdomifm electronic Ltd.efector HouseKingsway Business ParkOldfield RoadHamptonMiddlesex TW12 2HDTel. +44 / 20 / 8213 0000Fax +44 / 20 / 8213 0001enquiry_gb@ifm.comwww.ifm.com/uk
USAefector inc.805 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 2010info@ifmefector.comwww.ifmefector.com
VenezuelaPetrobornas, C.A.Calle Pricipal, Centro Comercial Astur, Nivel PB, Local 05, Sector Matanzas, UD-321,Puerto Ordaz - Estado BolivarVenezuela Tel. +58 286-994 3406Tel. +58 286-718 1123 Fax +58 286-994 3406Fax +58 286-994 4711info@petrobornas.netwww.petrobornas.net
VietnamThien Viet Electrical Serviceand Trading Co., Ltd.784 Dien Bien Phu Str.Ward 11, Dist. 10Ho-Chi-Minh-City, Viet NamTel. +84 / 8 / 830 9916 Fax +84 / 8 / 830 9915thivicoltd@hcm.vnn.vn
visit our website:
www.ifm.com
Position sensorsand object recognitionInductive sensorsCapacitive sensorsMagnetic sensors,cylinder sensorsSafety technologyValve sensorsPhotoelectric sensorsObject recognitionEncodersEvaluation systems,power suppliesConnection technology
Fluid sensorsand diagnostic systemsLevel sensorsFlow sensorsPressure sensorsTemperature sensorsDiagnostic systemsEvaluation systems,power suppliesConnection technology
Bus systemsBus system AS-InterfacePower suppliesConnection technology
Identification systemsMulticode reading systemsRF-identification systemsPower suppliesConnection technology
Control systemsControl systemsfor mobile vehiclesConnection technology
Overview ifm product range:
We reserve the right to make technical alterations without prior notice. · 01.2011