Post on 06-Feb-2018
2008 SAE Show Automotive Lighting Technology,
Human Factors in Driver Vision and Lighting, Integrated Active Safety
April 29, 2008
TABLE OF CO
NTENTS
2
© copyright drivingvisionnews.com | 2008 SAE Show
TABLE OF CONTENTS
EXECUTIVE SUMMARY .................................................................................................................................................. 4 About sessions ..................................................................................................................................... 4 About exhibitions ................................................................................................................................ 4
LIST OF THE MAIN LIGHTING PAPERS
DESIGN CLAIMS AND TECHNICAL SOLUTION STEPS GENERATING THE WORLD FIRST FULL LED HL 5 Michael Hamm, A.L. and Wofgang Huhn, Audi
LED HEADLAMP DEVELOPMENT FOR MASS PRODUCTION ............................................................................... 8 Tetsuaki Inaba, Koito and Shinya Watanabe, Toyota and Yuji Yamada, Toyota
REFLECTORS ONLY MODULES FOR AFS FUNCTIONS USING LEDS ................................................................ 10 Pierre Albou, Vanesa Sanchez, Valeo Lighting Systems
RESOLVING COLOR BREAKUP OF PROJECTIONTYPE LED HEADLAMP BY USING A HYBRID LENS ... 12 Norifumi Kanai, Nalux
PROGRESS ON MODULAR LED SOURCES FOR LED HEADLIGHTING ............................................................. 14 Josef Schug, Philips
PERFORMANCE PARAMETERS FOR MULTIFILAMENT HALOGEN LAMPS ................................................. 15 Thomas Tessnow, Osram Sylvania and Sascha Zelt, Osram
INFLUENCE OF ALUMINUM COATING THICKNESS ON AUTOMOTIVE LAMPS ........................................... 16 Adam Vincens and Fadi Elkhatib, N.A.L.
STYLING AND DESIGN – THE REAL DRIVING FORCES FOR LED TECHNOLOGY ......................................... 18 Detlev Decker, Hella
FLEXIBLE SUBSTRATE OLED TECHNOLOGY AND ITS FUTURE POTENTIAL FOR AUTOMOTIVE LIGHTING ........................................................................................................................................................................ 20 Bart Terburg, GE Lighting
LIGHT SIMULATIONS: CONTROLLING STRAYLIGHT IN THE HEADLAMP ................................................. 22 Burghard Von Blanckenhagen, A.L.
GLARE FREE HEADLAMP – FIRST APPROACH AND SYSTEM DEFINITION ................................................. 24 Rainer Neumann, Visteon
MARKETWEIGHTED TRENDS IN THE DESIGN ATTRIBUTES OF HEADLAMPS IN THE US .................... 26 Brandon Schoettle, Michael Sivak, Naoko Takennobu, UMTRI
3
© copyright drivingvisionnews.com | 2008 SAE Show
LIST OF THE MAIN DRIVER ASSISTANCE PAPERS
DEVELOPMENT OF LONGRANGE SENSING ULTRASONIC SENSOR FOR AUTOMOTIVE APPLICATION. ........................................................................................................................................................................................... 27 Takafumi Kamemura, Ideo Takagi, Chinmoy Pal, Nissan Akira Ohsumi, Kyoto Institute of Technology
OPTIMIZATION OF ALLAROUND VIEW IMAGE QUALITY AND CAMERA CALIBRATION METHOD .... 28 Satoshi Chinomi, Masayasu Suzuki, Teruhisa Takano, Nissan Motor
LONG RANGE RADAR SENSOR FOR HIGHVOLUME DRIVER ASSISTANCE SYSTEMS MARKET ............ 30 Dirk Freundt, Bernhard Lucas, Robert Bosch GmbH
A UNIFIED APPROACH TO FORWARD AND LANECHANGE COLLISION WARNING FOR DRIVER ASSISTANCE AND SITUATIONAL AWARENESS ................................................................................................... 31 Zvi Shiller, Ariel University Center Rajan Prasanna, Jeremy Salinger, G.M.
FORWARD SENSING SYSTEM FOR LKS+ACC ........................................................................................................ 32 Ho Gi Jung, Yun Hee Lee, Pal Joo Yoon, Mando corporation Jaihie Kim, Yonsei University
EMBEDDED PROCESSOR TOOL FOR DEVELOPMENT AND OPTIMIZATION OF DRIVER ASSISTANCE ALGORITHMS. ............................................................................................................................................................... 33 Zoran Nikolic, Brooke Williams, Texas Instruments
Executiv
e Summary
4
© copyright drivingvisionnews.com | 2008 SAE Show
EXECUTIVE SUMMARY
About sessions
Weak attendance compared to last years. A maximum of 120 people attended the sessions in 2008 compared with more than 200 people a few years ago. Attendance of car makers and suppliers, mainly from Europe, is decreasing year by year. Japan attendees now outnumber European representatives.
In Lighting, Sessions were focused to LED benefits, performances and Styling. No paper on Xenon or BiXenon systems. Very little information on AFS/bending light. The big 5 (A.L., Hella, Koito, Valeo and Visteon) presented only one lectures each
In Driving assistance, some appealing papers were presented, like the improvement of All‐around view image from Nissan and the trend to fusion LKS and ACC
About exhibitions
Very few lighting and driver assistance suppliers are present. Only 2 booths are involved in Lighting and 3 booths in Driver assistance.
Docter Optics presents their lens innovations
o Camera: Elimination of reflections and veiling glare which cause a loss of signal quality
o Projector: Free form lens used on Hella LED headlights for Cadillac.
LucidDrive presents its standalone Night Driving Simulation which uses latest modern graphics hardware technology.
Continental presents a radar‐based distance control system, a camera‐based driver assistance systems and a Lane keeping system based on its specific camera technology.
Aisin presents an intelligent Parking Assist System jointly developed with Toyota, a DRL control system and a Driver Monitor System which detects driver facial’s direction for enhanced safe driving.
Hitachi stresses recognition of driving environment with radar, Image‐processing camera and navigation systems.
Design Claims and technical Solution Step
s gene
ratin
g the World First Full LED
H‐L
5
© copyright drivingvisionnews.com | 2008 SAE Show
DESIGN CLAIMS AND TECHNICAL SOLUTION STEPS GENERATING THE WORLD FIRST FULL LED HL
Michael Hamm, AL and Wolfgang Huhn, Audi 2008010337
Headlamp of Audi R8
Optics
Low Beam: One upper part and one lower reflector with 2x4 LED for spread, one central projector with 3x4 LED for hot spot. Appearance with a high‐tech effect. Totality provides 900 Lm and a maximum of 55Lx, according supplier road map. Challenge: To combine many components and to adjust several cut‐offs.
HighBeam: 2 reflectors with 2x4 LED Challenge: Luminance of LED much lower than luminance of Xenon arc and alignment.
Dr Hamm, on the left, presents the main challenges of the Audi R8 LED H‐L.
Dr Huhn, on the right, emphasizes some points related to the challenges of DRL about safety and
consumption reduction.
Design Claims and technical Solution Step
s gene
ratin
g the World First Full LED
H‐L
6
© copyright drivingvisionnews.com | 2008 SAE Show
T.I.:8LED. Challenge: As with all LED devices, it is to adjust thermal management.
Assembling. Many components used and several cut‐offs to coordinate and adjust Challenge: Design and production process for a perfect alignment. Modular approach for each function in order to provide a better testing, release, assembly and service possibilities
Thermics
Fans to decrease hot areas, to improve condensation and to avoid high weight Challenge:Reliability
DRL
24 LED, 15Lm each. Audi concept improves safety without increasing consumption (14W vs 300W halogen) About the T.I. visibility when DRL on, Dr Huhn presented a possible shift DRL to position light. This prospect faces steep challenge in GRE regulatory committee, however.
Thick light guide: 3-d impression supported by reflection on bottom surface
Primary Optics: Efficient coupling and Lightcoupling „quasi parallel“ light
Challenge: It is the thick light guide, a 300mm long element in the headlamp that provides a 3‐dimensional appearance. The thick light guide technology allows an impression of a homogeneous luminance at far distance and an impression of more than 200 LED dots at close distance.
7
© copyright drivingvisionnews.com | 2008 SAE Show
Feedback from the Expert LED headlamp is considered the technology. Nevertheless, the presentation proves that if we want to have a breakthrough on the style like R8, the challenges of optics, electronics, thermics/condensation and assembling are not yet totally solved and we still need a few more years to have high volume cars with LED. The 2012 target date announced by Dr Huhn is a big challenge.
In the picture, Dr Huhn explains DRL Benefit and the possibility to shift DRL to position light when T.I. is on
LED
Headlam
p Develop
men
t for M
ass prod
uctio
n
8
© copyright drivingvisionnews.com | 2008 SAE Show
LED HEADLAMP DEVELOPMENT FOR MASS PRODUCTION
Tetsuaki Inaba, Koito and Shinya Watanabe, Toyota and Yuji Yamada, Toyota 2008010339
T. Inaba presents the technologies and the main challenges of the Toyota Lexus L600 LED headlamp. Only the Low beam uses LED sources and there are not specific DRL in the headlamp. Low Beam
Low beam is obtained with three projector modules at the top, one for hot spot, one medium width, one wide and one LED reflector at the bottom, for a very wide light, like fog light. Challenge: No big innovation in optics but difficult to align the 4 cut‐off.
Thermics
Fans are not used because reliability risks Challenge: To solve heat variation without fan, by using 2 heat sinks (one moving, one fix) and a heat pipe to move the heat from hot areas to cooler areas. The introduction of a heat pipe is described to gain 9° thermal decrease at 140°.
Assembling
The 3 projector modules and the reflector are adjusted with a difficult process on alignment of the multiple cut‐offs. Challenge: To define a design and a process to assure the alignment of 4 cut‐off.
LED
Headlam
p Develop
men
t for M
ass prod
uctio
n
9
© copyright drivingvisionnews.com | 2008 SAE Show
Feedback from the Expert Koito has done a very good and pragmatic job. The challenge was not as high as AL with Audi R8 because of no styling breakthrough and this is not a full AFS lamp, but Koito developed and produced the first LED low beam 2 years before competition. Koito solves the thermal issues with an innovative pipe, maybe a complex solution, and expects solving the alignment of the projector cut‐off. The performance of the product is not at the Xenon level but the challenge was more to start and to solve the LED issues more than to have better performances than Xenon.
Reflectors on
ly M
odules fo
r AFS Fun
ctions using
LED
s
10
© copyright drivingvisionnews.com | 2008 SAE Show
REFLECTORS ONLY MODULES FOR AFS FUNCTIONS USING LEDS
Pierre Albou, Vanesa Sanchez, Valeo Lighting Systems 2008010341
Vanesa Sanchez
Vanesa Sanchez presents the XLED concept and the main challenges.
The target of this concept is to obtain new styling appearance and to avoid moving parts
‐ Additional bending light, PBL concept
LED light sourceCollecting
reflector
Output mirror
Image folder mirror
Light source
Collecting reflector
Output mirror
Image folder mirror
H
α
H
α
Reflector Progressive Bending Light
Additional bending light, PLB concept Progressive Bending Light
One PBL module consists on a LED located at the focus point of the ellipsoidal reflector which collects the light to reflect to a parabolic reflector. 3 PBL modules are used to give a dynamic movement depending of the curve radius
Reflectors on
ly M
odules fo
r AFS Fun
ctions using
LED
s
11
© copyright drivingvisionnews.com | 2008 SAE Show
Motorway light
Protection plate
Output mirror
Output wavefront
Source wavefront
Light source
Output mirror
Actual LED
Shield
Folding mirror
Reflector Motorway
Motorway light
A reflector is used to give a very small vertical spread of the beam, less than 2° to complete the upper part of the cut‐off
Feedback from the Expert It is an appealing concept to avoid moving parts and to present an innovative appearance. This solution can be also used with LED Low beam and LED High Beam. The driver can see the benefit and the concept could be used with high beam glare free. The challenge of the aligning different modules is moderately difficult. This concept is a little more expensive but with the cost reduction of LED, it could be an interesting possibility.
Resolving
Color Breakup
of P
rojection‐type
LED
Headlam
p by
using
a Hybrid Lens
12
© copyright drivingvisionnews.com | 2008 SAE Show
RESOLVING COLOR BREAKUP OF PROJECTIONTYPE LED HEADLAMP BY USING A HYBRID LENS
Norifumi Kanai, Nalux 2008010342
Prototype demonstration
Norifumi Nakai presents a technology to solve chromatic aberration in projector modules.
This technology can be applied only on plastic lenses, not possible with Halogen or Xenon (heat) and can be applied on LED
The author explains why, chromatic aberration appears near the cut‐off and how we can measure and calculate this level of aberration or the degree of color breakup. In a second part the author presents a Hybrid Lens which has a diffractive optical element (DOE) on an optical surface of a conventional lens.
Norifumi Nakai
Resolving
Color Breakup
of P
rojection‐type
LED
Headlam
p by
using
a Hybrid Lens
13
© copyright drivingvisionnews.com | 2008 SAE Show
Some simple data explain the benefit of DOE: The difference of focal lengths between Red and Blue with a hybrid lens is only one tenth the difference with a conventional lens.. Because DOE decreases transmission efficiency, a partially Hybrid lens is designed with DOE only around the upper portion of the lens (height of DOE around R/2). The author announces a transmission comparable to that of the conventional lens.
Feedback of the Expert DOE is an interesting concept which dramatically reduces the chromatic aberrations. The proposal to use a part of the lens is also interesting because most of chromatic aberrations is coming from upper and lower part of the lens. This solution is much better than normally used which loose more than 10% of the flux Nevertheless, 2 points have to be confirmed:
Cost increase of the technology Exact lost of transmission and exact aberration benefit of a hybrid surface.
The projector module makers and the lens makers have to study and develop this concept
Progress on
Mod
ular LED
Sou
rces fo
r LED Headlighting
14
© copyright drivingvisionnews.com | 2008 SAE Show
PROGRESS ON MODULAR LED SOURCES FOR LED HEADLIGHTING
Josef Schug, Philip No paper
Josef Shug from Philips gives a general presentation of LED with some benefits and challenges. Styling. The prime driver for LED adoption is styling. The author presents the different possibilities of styling impossible to design with conventional point sources, halogen or Xenon. Thermics The author present a module designed in 4 parts,
LED with its support and the mechanical references Lens Support of the lens Radiator and the thermal challenges with interfaces, heat transport, Dissipation
Feedback from the Expert Nothing is new. The author wants to give some general directions of design to the customers. Nevertheless Josef presented an interesting LED projector module assembled with only 4 components.
Josef Shug
Perform
ance Param
eters for Multi‐Filamen
t Halogen
Lam
ps
15
© copyright drivingvisionnews.com | 2008 SAE Show
PERFORMANCE PARAMETERS FOR MULTIFILAMENT HALOGEN LAMPS
Thomas Tessnow, Osram Sylvania and Sascha Zelt, Osram 2008010487
Thomas Tessnow presents the bulb technologies able to produce low beam and AFS functions at a low cost.
The author explains how in a four pocket headlamp system, which uses H15 as the high beam and DRL function, the low beam could be paired with a bending beam and therefore offer an inexpensive solution for a halogen AFS system.
He explains how, by selecting a larger bulb diameter and an appropriate AFS filament power, the necessary luminance can be achieved without compromising the thermal limits of the bulb.
2 possibilities are presented, the second with the favor of Osram:
Two transversal additional filaments, one at the right of low beam filament, the second at the left. The left reflector and the right reflector would be the same.
One unique transversal additional filament. The left reflector would be designed to send light on the left and the right reflector to send light to the left
Feedback from the Expert It is a good idea to dramatically decrease the cost of AFS function avoiding additional reflector or moving parts, optimizing the halogen cycle.
Nevertheless, I can’t believe on good performances of AFS in comparison with current AFS light and I think this solution probably gives a degradation of low beam light.
Thomas Tessnow
Influ
ence of A
luminum
Coatin
g Thickness on
Autom
otive Lamps
16
© copyright drivingvisionnews.com | 2008 SAE Show
INFLUENCE OF ALUMINUM COATING THICKNESS ON AUTOMOTIVE LAMPS
Adam Vincens and Fadi Elkhatib, N.A.L. 2008010488
Adams Vincens presents a general study about the influence of Aluminum coating thickness on reflectivity and temperature of the surface. 1st data: Coating thickness vs Opening area/depth. There is a linear relationship. If area/depth reduced by 2, coating reduced by 2
2nd data: Reflectivity vs Al thickness. The reflectivity increases with Al thickness. The increase is rapid up to 500A, slower from 800A
3rd data: Temperature vs Al coating. For thickness less than 600A, temperature shows a linear relationship with Al coating thickness. Greater than 600A, the temperature did not continue to decrease significantly.
4th data: Electric resistance vs coating thickness. The electric resistance of the coating varies with the thickness of. A sharp decline is seen in the resistance below the reflectivity threshold of 600A
Conclusion:
A thickness of 600A is the best compromise with reflectivity, temperature and cost. The minimum ration area/depth to achieve 600A is 8 cm2/cm
Adams Vincens
Influ
ence of A
luminum
Coatin
g Thickness on
Autom
otive Lamps
17
© copyright drivingvisionnews.com | 2008 SAE Show
Feedback from the Expert Most of given information is known but the benefit of this conference is to present measured and calculated data about influence of the ratios Opening surface/depth, reflectivity/thickness temperature/thickness and resistance/thickness.
This data can provide a good tool for measurement and for specification on Al thickness and area/depth
Styling and Design – Th
e real Driving
forces fo
r LED Techn
ology
18
© copyright drivingvisionnews.com | 2008 SAE Show
STYLING AND DESIGN – THE REAL DRIVING FORCES FOR LED TECHNOLOGY
Detlef Decker, Hella 2008010490
Detlef Decker presents a general study on LED and explains how the wide range of variations in dimensioning can do a multitude of different styling possibilities to design engineers.
He presents the different styling possibilities:
Signature lighting from light guide technologies. Technical accentuation with different concepts. Homogeneous illuminated areas with the “Light curtain” concept in a car to be unveiled at Mondial Paris in October 2008.
The author also presents the variation of optical systems for LED applications:
Lens, Fresnel, Direct emission Reflector, Reflector and lens Light guide and light curtain
Detlef Decker
Styling and Design – Th
e real Driving
forces fo
r LED Techn
ology
19
© copyright drivingvisionnews.com | 2008 SAE Show
At the end of the paper, Detlef presents the Cadillac LED headlamp and the future stylistic and performances possibilities.
Feedback from the Expert It is an interesting but general technical/marketing presentation of the possibilities of LED on signal and on main headlamp functions.
Only one styling innovation presented: “Light curtain” which is a real styling breakthrough which could be used on rear and front lamp. This technology is going on the trend of car maker designers who search new optical system to enrich the headlamp.
Flexible Substrate OLED Techn
ology and its Future Po
tential for Autom
otive Lightin
g
20
© copyright drivingvisionnews.com | 2008 SAE Show
FLEXIBLE SUBSTRATE OLED TECHNOLOGY AND ITS FUTURE POTENTIAL FOR AUTOMOTIVE LIGHTING
Bart Terburg, GE Lighting
Bart Terburg presents an update position of OLED technology.
Bart Terburg
1
Inorganic LEDs Organic OLEDs
• High brightness point sources• Spot lighting applications:
- flashlights, - traffic lights, - DRL,- road Illumination devices
• Like filament light source
• Large area extended sources• Diffuse lighting applications:
- backlights, - signs, - general illumination- signal & marking?
• Like fluorescent light source
Key OLED Driver: Low Cost Potential
Solid State Lighting Technologies
Flexible Substrate OLED Techn
ology and its Future Po
tential for Autom
otive Lightin
g
21
© copyright drivingvisionnews.com | 2008 SAE Show
The main advantages of OLED technology in automotive lighting is the possibility to produce a large illuminated surface area (compare fluorescent light source) but at lower cost and with better styling features.
Last progress is decreased depth. Future possibility of “lighting wallpaper” and stable colour flexibility.
OLED can offer a large panel of styling appearance for interior and exterior lighting. In 2008, Bart announce an efficiency of 10lm/watt with a target of 100Lm/watt in 2011
Feedback from the Expert OLED technology has no application in illumination functions because the low brightness. But there is a great benefit potential for interior lighting and also for exterior lighting functions like position light/side marker, and also in the future for turn indicators and Stop lamps. Integrate signage in glass with CHMSL will be also possible.
Big improvement in life time span vs temperature opens the way to styling breakthrough in automotive lighting.
Light Sim
ulations: C
ontrolling Stray‐Light in the Headlam
p
22
© copyright drivingvisionnews.com | 2008 SAE Show
LIGHT SIMULATIONS: CONTROLLING STRAYLIGHT IN THE HEADLAMP
Burghard Von Blanckenhagen, A.L. 2008010667
Burghard Von Blanckenhagen presents a simulation of stray light (light which leaves the headlight in unwanted directions) in order to control during design phase the light above the cut‐off from 10° to 90°.
Burghard Von Blanckenhagen
Appearance if the strayed light as seen by an observer at h=15° and v=15°
Light Sim
ulations: C
ontrolling Stray‐Light in the Headlam
p
23
© copyright drivingvisionnews.com | 2008 SAE Show
The author explains the challenge to simulate stray light which exists in every headlamp.
3 stray light sources are considered:
1. Direct light from the filament.
2. Light after reflection on the 2 faces of the external lens and then bezel or other part.
3. Light after reflection to the bezel or to any part of the headlamp.
One important step for simulation is to characterize diffuse scattering surfaces with BRDF (Bidirectional Reflection Distribution Function) which depends on the incident direction of the light and on the scatter direction.
Feedback from the Expert Most headlamp makers have today a stray light simulation protocol based on a specular reflection.
The use of BRDF is not so easy but gives good results.
I am surprise by the so good accuracy of simulation and the mere 10% error announced.
Nevertheless, it is important for simulation to reproduce the main light spots. It is an excellent tool to convince the customer and its stylist and also to avoid some surprises when the first production samples arrive.
Schematic view of the critical light paths,which contribute to straylight
Backtracking of the critical rays
Glare Free Headlam
p – First A
pproach and System
Definition
24
© copyright drivingvisionnews.com | 2008 SAE Show
GLARE FREE HEADLAMP – FIRST APPROACH AND SYSTEM DEFINITION
Rainer Neumann, Visteon2008010668
Dr Neumann explains the great need of drivers to drive with high beam glare free. He reviews past efforts to reconcile glare control with high‐beam usage such as polarized light in 1960‐1970 timeframe when halogen arrived, then with UV light when HID arrived. He also explains why these failed because too much lost light.
3
LIN
CAN
ECU VisualizationCustomer PresentationData LoggingDebugging
USB/RS232CAN
System architectureSystem architecture
2008 – 01 - 0668
Dr Neumann
Glare Free Headlam
p – First A
pproach and System
Definition
25
© copyright drivingvisionnews.com | 2008 SAE Show
Now with the arrival of LED, it is a new interesting possibility with big chance to succeed because the technology is here with LED and with camera to detect the scenery in front of the vehicle. In a second part, Dr Neumann presents today’s situation with automatic low and high beam selection and the big benefit of this technology, permitting the driver to use high beam for longer time periods.
Then, in the main part of his presentation, the author presents the different possibilities to obtain a glare free light with a camera and the corresponding software. He presents the “Glare free Cut‐off”, higher than Low beam cut‐off and motorway cut‐off. The benefit is a much better illumination on the left and the right without providing glare.
Dr Neumann finishes his conference by considering some limits of the technology:
Cycles, Motorcycles, Pedestrians, cars with one failed light Weather conditions Regulations
Dr Neumann considers this technology not yet mature because these different limits. “We will not see it in less than 10 years’ time”.
Feedback from the Expert It is an interesting and practical conference from an expert which presents the endless research of lighting suppliers to decrease glare. One important interrogation is to know if the high beam free of glare will be obtained by special shapes of the cut‐off or by a dynamic “black hole” in the direction of other drivers.
With the arrival of LED, I am a little more optimistic and I consider we will see the first cars on the road with high beam free glare in less than 10 years.
Market‐Weighted Tren
ds in
the de
sign
Attribu
tes of Headlam
ps in
the US
26
© copyright drivingvisionnews.com | 2008 SAE Show
MARKETWEIGHTED TRENDS IN THE DESIGN ATTRIBUTES OF HEADLAMPS IN THE US
Brandon Schoettle, Michael Sivak, Naoko Takennobu, UMTRI 2008010670
Brandon Schoettle provides various statistics about the lighting technologies used in US from a new survey conducted in 2007 after 1997, 2000 and 2004 surveys.
Lightsources 9004 bulb not used anymore and 9006/9005 + H11/H13 represent more than 70% of the US light source market.
0ptics Clear lens almost represent the totality of the market (one third only 10 years ago) with 90% for reflectors and 10% for projectors.
Aiming Mechanical aiming which represented 75% of US market 10 years ago doesn’t exist anymore and VOL/VOR share the market VOR holding 73%.
Expert from feedback UMTRI have done a very good job to obtain a picture of lighting technologies used in US and we have to thank them and to help them in future such endeavours.
This picture confirms that after big differences on lighting technologies between Europe/Japan until 1990 (Aerodynamics headlamp with 9004 bulbs after Sealed Beam), US is gradually going in the same technologic directions as Europe, with clear lens, projector modules and same bulbs as well as comparable aiming techniques.
The US regulations are still an obstacle for identical technology but the US technologies are growing closer to Europe/Japan technologies.
We can regret we have not such organization in Europe to manage statistics like UMTRI.
Develop
men
t of Lon
g‐Ra
nge Sensing Ultrason
ic Sen
sor for Autom
otive App
lication.
27
© copyright drivingvisionnews.com | 2008 SAE Show
DEVELOPMENT OF LONGRANGE SENSING ULTRASONIC SENSOR FOR AUTOMOTIVE APPLICATION.
Takafumi Kamemura, Ideo Takagi, Chinmoy Pal, Nissan Akira Ohsumi, Kyoto Institute of Technology 2008010910
Short‐range sensors like cameras and radars have become essential components of safety systems and user‐friendly convenience systems, such as pre‐cash safety or parking assist systems.
However, they are generally too expensive to implement on lower‐end vehicles at the opposite of lower cost sonar.
The paper presents an effective method of improving the maximum detection range of ultrasonic sensors.
To improve the maximum detection range, the method of improving hardware was rejected because difficult automotive specifications and the method using signal processing was chosen. Usually, an automatic gain control circuit is employed to amplify the received signal from a long distance, but in this case disturbances are also amplified. Consequently, some effective signal processing procedure is needed to accomplish detection of the reflection signal masked by the noise.
The application of a pseudo‐Wigner distribution and a maximum likelihood estimation method make it possible. As a result, this approach can extend the maximum detection range obtained with conventional ultrasonic by 2.5 times.
To successfully implement in automotive applications, we have to test whether this method is applicable in real‐world situations involving various noisy reflected waves and relatively high‐speed moving targets in real time.
Optim
ization of All‐arou
nd View Im
age Quality and Ca
mera Calibratio
n metho
d
28
© copyright drivingvisionnews.com | 2008 SAE Show
OPTIMIZATION OF ALLAROUND VIEW IMAGE QUALITY AND CAMERA CALIBRATION METHOD
Satoshi Chinomi, Masayasu Suzuki, Teruhisa Takano, Nissan Motor 2008010665
Satoshi Chinomi, from Nissan describes the methods adopted to improve the image quality of the all‐around view system. An all‐around view system means the view from a virtual camera located 5 meters above the car.
The “virtual view” is obtained from 4 cameras located at the front, at the rear, at the right side and at the left side of the car.
C am era
Virtual C am era
C am eraC am era
Virtual C am era
Satoshi Chinomi
Virtual Camera (1) Virtual Camera (2)
Optim
ization of All‐arou
nd View Im
age Quality and Ca
mera Calibratio
n metho
d
29
© copyright drivingvisionnews.com | 2008 SAE Show
The author explains how Nissan improved the main two issues:
Partial decline in allaround view image quality It was shown that optimization of the camera parameters improved the quality of the overhead view with respect to reducing partial digital zooming.
Camera calibration
It was shown that a two‐dimensional calibration technique is capable of calibrating overhead views.
The technique uses pixel shifting in the horizontal and vertical directions of a camera image and rotation of the image to approximate and correct the physical, three‐dimensional angle error of a camera.
Feedback from the Expert The All‐around View Image debuted end 2007 on the Elgrand in Japan and on the 2008 Infiniti EX35 in US. The resulting view aids in parking and low‐speed maneuvers by reducing blind spots.
The driver assistance breakthrough technology is still under improvement.
Some interesting improvements are presented including the possibility for retailers to calibrate the 4 cameras.
The virtual view is a very interesting concept which could replace the other views and which will be used by young people.
Camera calibration
Lon
g Ra
nge Ra
dar Sensor fo
r High‐Vo
lume Driver Assistance System
s market
30
© copyright drivingvisionnews.com | 2008 SAE Show
LONG RANGE RADAR SENSOR FOR HIGHVOLUME DRIVER ASSISTANCE SYSTEMS MARKET
Dirk Freundt, Bernhard Lucas, Robert Bosch GmbH 2008010921
This paper covers the technical development of a long range radar sensor that can address the requirements for high performance systems as well as requirements for cost‐efficient sensor component.
This long range radar is characterized by 3 properties:
Cost efficiency The cost efficiency encourage the application even in the lower class car degment
Performance The sensor allows the integration into advanced safety relevant systems
Reliability Standardized manufacturing processes guarantee a robust and reliable sensor
The innovations are presented by the author as major breakthrough for the market penetration of radar based driver assistance systems.
A Unifie
d App
roach to Forward and lane
‐Change Co
llision
Warning
for Driver Assistance and
Situational A
waren
ess
31
© copyright drivingvisionnews.com | 2008 SAE Show
A UNIFIED APPROACH TO FORWARD AND LANECHANGE COLLISION WARNING FOR DRIVER ASSISTANCE AND SITUATIONAL AWARENESS
Zvi Shiller, Ariel University Center Rajan Prasanna, Jeremy Salinger, G.M. 2008‐01‐0204
The authors first present a velocity‐obstacle based unified warning algorithm that can handle a number of crash types that are the result of misjudgment of distance and speed or driver inattention.
These crashes account for about one third of all police reported crashes in US. This is a significant number of crashes that can be reduced by collision warning systems that account for the distance and speed of the neighboring vehicles.
The authors present their development on a unified approach to collision warning due to in‐lane and neighboring traffic. This approach is based on the concept of velocity obstacles and is designed to alert the driver of a potential front collision and against attempting a dangerous lane change maneuver.
The velocity obstacle takes into in account the vehicle shape, velocity and path curvature. A recent extension of the velocity obstacle accounts also for general host trajectories. Potential collisions are detected when the velocity vector of the host vehicle penetrates the velocity obstacle of a neighboring vehicle.
Forward Sensing System
for LKS+ACC
32
© copyright drivingvisionnews.com | 2008 SAE Show
FORWARD SENSING SYSTEM FOR LKS+ACC
Ho Gi Jung, Yun Hee Lee, Pal Joo Yoon, Mando corporation Jaihie Kim, Yonsei University 2008010250
The paper presents the advantages of a safety system integrating Lane Keeping System, LKS, and Adaptive Cruise Control, ACC.
In the beginning, the 2 systems have been developed as two separate systems. However, as the adoption rate of ACC is rising and various marketable embedded vision systems are emerging, the LKS + ACC system integrating two functions attracts more interest.
The author proposes a method utilizing the range data from ACC for the sake of lane detection. In the aspect of lane keeping control, if ACC is not operating, it is hard to predict time to cross. Contrarily, if ACC controls vehicle speed, LKS can easily design and follow driving trajectory.
In conclusion, this paper shows that a range sensor can enhance detection performance and simplify lane detection algorithm.
Embe
dded
Processor Too
l for Develop
men
t and
Optim
ization of Driver Assistance Algorith
ms.
33
© copyright drivingvisionnews.com | 2008 SAE Show
EMBEDDED PROCESSOR TOOL FOR DEVELOPMENT AND OPTIMIZATION OF DRIVER ASSISTANCE ALGORITHMS.
Zoran Nikolic, Brooke Williams, Texas Instruments 2008011250
The paper presents a digital signal processor that allows for the development and optimization using of algorithms the target embedded processor earlier in the design process.
The author describes the challenges during the algorithm development flow that hinder the realization of ADAS:
Different environments, CAN bus data, LIN bus data, data from imaging sensors and bus data.
Different hardware Large amount of recorded data Multiple data collection systems Data transfer between vehicle and the lab.
To address these challenges, an Automotive Vision Development Platform, AVDP, is used to decrease time to market by bridging the gaps during field and lab testing and by bringing research and product teams closer.
The AVDP is designed for ADAS applications and is intended to reduce time to market. It is addressing software and hardware challenges in the development process. It can be used to recreate in the lab situations observed during field test.