Post on 02-Jun-2018
8/10/2019 2 Access Covers and Gratings
1/32
49www.burdens.co.uk
SECTION 2
Access Covers &Gully GratingsIncluding Highway Maintenance Products
Product Specication
Including BS EN124 Page 50
Access Covers Page 53
Gully Grates Page 64
Kerb Drainage Page 72
Surface Boxes Page 76 Highway Maintenance
Products Page 80
8/10/2019 2 Access Covers and Gratings
2/32
50 www.burdens.co.uk
Access covers and gully grates installed in the UK should meet therequirements of the European standard BS EN124. This applies to
all situations, road and off-road and all materials. Products designed
to BS EN124 are grouped and classified depending on their place
of installation.
It is the responsibility of the engineer to ensure that the correct product
is specified,
The appropriate class of manhole top or gully top to be used dependsupon the place of installation. The selection of the appropriate class is
the responsibility of the designer. Where there is any doubt the strongerclass should be selected.Clause 5 BS EN124
BS EN124 Specication
PAM is the recognised leading brand
of municipal castings in the UK, uniquely
positioned to provide access and drainagesolutions to the highway, telecommunication,
utility, commercial and industrial markets. The
PAM range is available through Burdens.
Product Specication
8/10/2019 2 Access Covers and Gratings
3/32
51www.burdens.co.uk
Today, more than ever before, quality is of paramount importance in
the construction of the road network, not just to manufacturers but
to suppliers, installers and road users alike. With ever increasing trafficvolumes, the strain placed on roads and upon the access covers and gully
grates within those roads, is at the highest levels ever.
In this climate, specifiers have become increasingly conscious of their
obligation to ensure road user safety by demanding products which are
manufactured and tested to the highest standards. This re-assurance
is afforded by specifying high quality, third party accredited products.Customers can be sure that products bearing the BSI Kitemark have
been independently certified as complying with BS EN124.
The Kitemark is recognised around the world as proof
that a product has been made, tested and fully complies
with the technical requirements of the Standard.
Saint-Gobain PAM UK manufactures its highway
products in accordance with the following three
Kitemark licences:
BS EN124: 1994,
BS 5834: Part 2 : 1983 and
BS 5834: Part 3 : 1985.
Saint-Gobain PAM UK manufacture a wide range of access covers and
gully grates each designed for a specific application. When selecting
a product it is important that the specification of each product is
considered in addition to the guidance contained within BS EN124 in
order to best meet the requirements of the application.
In many cases a number of products will be classified to the same
BS EN124 reference and group but may have specific and different
recommended usages.
Factors such as volume, speed and type of traffic plus any special
conditions such as narrow lanes, roundabouts, traffic lights, traffic
calming and bus routes need to be considered for road applications.
In off-road situations consideration should be given to the likelihood of
vehicle loading for parking or to gain emergency access, frequency of any
trafficking and the type of vehicles likely to traffic the product.
Guidance is given throughout this guide on the recommended applications
for each product.
BS EN124 Specication cont.
8/10/2019 2 Access Covers and Gratings
4/32
52 www.burdens.co.uk
LTS (Load Transfer System)
The LTS feature was designed specifically to reduce the strain the
casting creates in specific areas of the bedding material.
Large Corner Webs
The range has been optimised so that there is an
increased area where the load is concentrated
giving a reduction of measurable strain between
30% to 50% in the bedding.
Bonding Ribs
Rib design significantly improves bonding to the
bedding material creating a greater resistance to
lateral shift. This helps to avoid early separation and
cracking of the bedding material, which can cause
premature failure.
Rib Positioning
Positioning of the ribs plays a critical role in
reducing the risk of cracking the bedding material.
The position opposite the cover seating areas
reduces the risk of frame deflection and insures that
impact to the surrounding materials is limited.
Flange Stiffness
The thickness of the flange at the corners prevents
bending caused by dynamic loading. Prevention
of bending in this area reduces disturbance of the
bedding material.
8/10/2019 2 Access Covers and Gratings
5/32
53www.burdens.co.uk
Access Covers
8/10/2019 2 Access Covers and Gratings
6/32
54 www.burdens.co.uk
The Opt-Emax Range
Catalogue
Ref
185719 D400 600 x 450 800 x 650 100 22* 83
172472 D400 600 x 600 800 x 800 100 26* 95
CD0P67MK D400 675 x 675 875 x 875 100 40* 118
185735 D400 900 x 600 1100 x 800 100 40* 128
186789 D400 1060 x 700 1210 x 850 100 51* 170
185744 D400 1220 x 685 1380 x 885 100 38* 217
205457 D400 1200 x 750 1350 x 945 100 39* 217
CDOP19GK D400 1500 x 750 1660 x 940 100 43* 243
186795 D400 1800 x 750 1955 x 940 100 39* 317
211029 D400 600 x 600 800 x 800 150 26* 106
211563 D400 675 x 675 875 x 875 150 40* 143
211032 D400 900 x 600 1100 x 800 150 40* 142
211562 D400 1220 x 685 1380 x 885 150 38 254
*Heaviest hinged cover in unit.
Class Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Depth
(mm)
Total
mass
(kg)
Cover
mass
(kg)
The Opt-Emax range of covers and frames has been specifically developedto offer operatives a quicker, easier and safer access to underground services.The Opt-Emax hinged covers offer many benefits over traditional lift-out
covers, and long term performance thanks to the LTS features.
At a glance Easy access and installation Health and Safety: highest standards of safety
and performance, the covers block at 90. Maximum durability in arduous conditions.
Anti-theft/anti-vandal design with optionallocking kits.
Easy and safe cover handling.Its unique Tilt and Pushdesign disengages the 90 blocking and allows aprecise and easy closing of the covers.
Tilt Push
Turnbuckle retro-t locking kits with hex head bolts and turnbuckle retro-tlocking kits with SCS head bolts are available for this range. Please contactyour local branch for further details.
Also available as
version
8/10/2019 2 Access Covers and Gratings
7/32
55www.burdens.co.uk
The Inter-Ax Range
Product features
Developed following a research programme atNottingham University, the Inter-Ax range of traditional liftcovers has been developed with the research conclusionsin mind and incorporates the new LTS feature.
The Inter-Ax range has been specically engineeredto cope with all the varying trafc loadingsencountered on todays busy highways.
The D400 products are marked with one of the following trafc intensitymarkers to simplify specification and selection of the most appropriatecasting:
H for High traffic intensity locations
Nfor Normal traffic intensity locations
L for Low trafc intensity locations
All the Inter-Ax range has been developed for use with
Saint-Gobain PAM UKs LTS Polyester Resin Bedding Mortar(SAP: 190277 & 190556).
Inter-Ax also features a bre-optic point of drilling hole inthe cover, avoiding the underside cover webs to provideaccess into the sewer for bre-optic cameras.
Inter-Ax D400 - H
Recommended for use in trunk roads whereexceptional levels of fast-moving continuous heavytrafc are present and for the installation of seal plates.
Catalogue
Ref
185928 D400 H 600x600 800x800 150 57000 55 104
185935* D400 H 600x600 800x800 150 57000 54 103
185937 D400 H 675x675 875x875 150 63000 82 148
*Ventilated cover
Screw down lockable covers also available. Please contact your local branch for further information
Class Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Corner
area(mm
2)
Cover
mass(kg)
Total
mass(kg)
INTENSITY
HINTENSITY
NINTENSITY
L
INTENSITY
H
FEATURE
CLASS
D400
INTENSITY
GROUP
4
KITEMARK
Also available as
version
8/10/2019 2 Access Covers and Gratings
8/32
56 www.burdens.co.uk
Inter-Ax2 D400 - N
USE: City roads carrying heavy trafc
Catalogue
Ref
185892 D400 N 600x600 800x800 100 43* 74
211603 D400 N 675x675 875x875 100 59* 92
185904 D400N 600x600 800x800 150 43* 83
211604 D400N 675x675 875x875 150 59* 102
*Cover mass per pair
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Cover
mass
(kg)
Total
mass
(kg)
BS EN124
Class
Inter-Ax D400 - N
USE: City roads carrying heavy trafc
Catalogue
Ref
CDIA45MF D400 N 450x450 600x600 100 32 52
185775 D400 N 600x450 800x650 100 42 70
185796* D400 N 600x600 800x800 100 49 81
185799 D400 N 600dia 800x800 100 50 86
185806* D400 N 600dia 800x800 100 49 85
185821* D400 N 675x675 850x830 100 69 106
185847 D400 N 750x750 1005x1005 100 48 151
185854* D400 N 750x750 1005x1005 100 48 150
185810* D400 N 600x600 820x770 150 49 92
185834* D400 N 675x675 880x830 150 70 123
*Ventilated covers Cover mass per pair
Optional: Locking, safety grids and seal plates available for some sizes. For further information
please contact your local branch.
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Cover
mass
(kg)
Total
mass
(kg)
BS EN124
Class
INTENSITY
N
FEATURE
CLASS
D400
APPLICATION
GROUP
4
KITEMARK
INTENSITY
N
FEATURE
CLASS
D400
APPLICATION
GROUP
4
KITEMARK
8/10/2019 2 Access Covers and Gratings
9/32
57www.burdens.co.uk
ULT-Emax D400
USE: Specially designed for inspection: allowsone-man operations from above ground.
Achieving cost efciency
Ult-Emax allows quick, safe and easy inspections, asonly one cover needs to be opened
Reducing injuriesIndependent covers opened individually by one manin ergonomic conditions.Safer and easier operations, with reduced risk ofinjury.
Catalogue
Ref
205763 D400 600 x 600 800 x 800 100 84
211605 D400 675 x 675 880 x 830 100 97
205765 D400 600 x 600 800 x 800 150 94
211606 D400 675 x 675 880 x 830 150 107
Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Depth
(mm)
Total
mass
(kg)
Class
FEATURE CLASS
D400
APPLICATION
GROUP
4FEATURE
KITEMARK
Silent Knight D400
USE: Recommended for use incity roads carrying heavy
trafc.
CLASS
D400GROUP
4
KITEMARK
APPLICATION
Catalogue
Ref
186072 D400 1210x685 1385x850 100 207
186079 D400 1825x685 1985x850 100 306
186074 D400 1210x685 1385x850 150 241
186082 D400 1825x685 1985x850 150 354
All the above units have open keyways. Closed keyways also available. Seal plate capable
products available on request.
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
Class
Also available as
version
8/10/2019 2 Access Covers and Gratings
10/32
58 www.burdens.co.uk
GripTop range
A complete new range of D400 access coverswith a specific anti-skid surface made of aggregateand bonding agents, designed to make dangerzones saferfor everyone.
GripTop is a proven cover surface treatment developed from years of researchand 3 years on-site testing and is designed to provide durable performancewhere the road configuration and traffic conditions require long-lasting grip foradded safety.
Fully compliant with HA104/09 skid resistance requirements for potentially highrisks sites. A full copy of the HA104/09 advice note can be downloaded from:www.standardsforhighways.co.uk/dmrb/vol4/section2/ha10409.pdf
Saint-Gobain PAM UK has developed GripTop as a new version of the PAMranges: Inter-Ax2, Ult-Emax and Opt-Emaxto provide extra safety when itmatters most.
Catalogue
Ref
212925 GripTop Opt-Emax D400 600x600 100 98
212927 GripTop Opt-Emax D400 900x600 100 139
212928 GripTop Opt-Emax D400 1220x685 100 221
212933 GripTop Ult-Emax D400 600x600 100 82
212934 GripTop Ult-Emax D400 675x675 100 101
212937 GripTop Inter-Ax D400 600x600 100 76
212938 GripTop Inter-Ax D400 675x675 100 94
All the above products also available with 150mm deep frame.
Class Clear
Opening
(mm)
Depth
(mm)
Description
Winner of International
Safety Awards 2009
8/10/2019 2 Access Covers and Gratings
11/32
59www.burdens.co.uk
Pamrex
Designed to withstand the rigours of modern trafc conditions,Pamrex is capable of withstanding loads in excess of the EN 124 D400requirement.
This is achieved in silence thanks to its unique elastomer gasket. Morerecent enhancements included improved ergonomic and securityfeatures.
Inltration
To dramatically reduce the amount of surface water entering thesewer system, engineers at Saint-Gobain Pipelines have developed aninnovative plug for the hinge housing.
The dual wiper plug reduces the amount of water entering thenetwork while at the same time enabling debris to be easily removed
from the hinge housing and an additional ring completes the no-ingressperformance.
Safety
Protecting eld personnel from the risk of injury and the below-groundnetworks from catastrophic failure are two of the primary concerns facingtodays engineers and municipal administrators.
Hinge incorporates a 90 blocking feature to prevent accidentalclosure.
Self-centering design of the gasket eliminates the need to guide thecover into position when closing
Lifting loops in the frame assists safe ofoading and installation withappropriate and safe equipment
The cover is designed to open and release the pressure if the sewerbecomes surcharged (provided that no additional lock has been fittedand that the frame has been securely anchored to the top of thechamber)
The cover opens to 130 to allow uninterrupted access. It can also becompletely removed if deemed necessary.
Design
Improved ergonomics
Hinges reduce the physical effort by 50%
Hinges allow the operator to move in a straight line thereby avoidingdamaging spinal rotation
Lifting points in the cover are designed for use with standard tools(pickaxe/hook/bar).
8/10/2019 2 Access Covers and Gratings
12/32
60 www.burdens.co.uk
Pamrex D400
Catalogue
Ref
CDPA60MFX26 D400 600 dia 840x840 100 55 97
CDPA70MFX26 D400 700 dia 940x940 100 71 118
CDPA80KFX26 D400 800 dia 1000x1000 125 73 131
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
Cover
mass
(kg)
BS EN124
Class
FEATURE CLASS
D400
APPLICATION
GROUP
4FEATURE
KITEMARK
Stability and durability
Gasket rings absorb damaging traffic shock and help to prevent thebreakdown of frame bedding materials. Therefore structural failure thatcan lead to more serious problems like frame instability is significantlyreduced. Scientic analysis has clearly shown that new gaskets absorb 64%
of the shock and even after many years of service continue to absorb over50% of the shock
Gasket rings ensure cover stability regardless of traffic conditions.
8/10/2019 2 Access Covers and Gratings
13/32
61www.burdens.co.uk
Silent Knight E600
USE: For use in trunk roadscarrying fast moving trafc and
industrial areas subjectto exceptionally heavy
trafc. e.g. dualcarriageways, docksand container areas.
CLASS
E600
APPLICATION
GROUP
5
KITEMARK
Catalogue
Ref
OPEN KEYWAYS
186103 E600 1210x685 1375x850 150 260
186108 E600 1825x685 1985x850 150 383
CLOSED KEYWAYS
186114 E600 1210x685 1375x850 150 267
186122 E600 1825x685 1985x850 150 384
MSG safety grid units also available.
Clear opening
AxB
(mm)
Over Base
CxD
(mm)
Depth
(mm)
Total
mass
(kg)
Class
Briton E600
USE: For use in trunk roadscarrying fast moving trafc and
industrial areas subject
to exceptionally heavytrafc. e.g. dualcarriageways, docksand containerareas.
CLASS
E600
APPLICATION
GROUP
5
KITEMARK
Catalogue
Ref
OPEN KEYWAYS
185941 E600 610x610 815x815 150 80* 130
CLOSED KEYWAYS
185948 E600 610x610 815x815 150 79* 130
* Cover mass per pairUse loop handled lifting keys
Clear opening
(mm)
Over Base
(mm)
Cover
mass
(kg)
Total
mass
(kg)
Class Depth
(mm)
8/10/2019 2 Access Covers and Gratings
14/32
62 www.burdens.co.uk
Ductile Light Duty
USE: Recommendedfor use where vehiculartrafcking is not expectedand where a single ordouble seal is required.
Catalogue
Ref
Single Seal
186870 B125 600x450 711x560 41 26 40
186874 B125 600x600 771x771 44 34 53
Double Seal
186884 B125 600x450 776x625 41 30 53
186889 B125 600x600 776x776 44 49 79
Please Note:Screw down lockable covers also available - please ask for further information
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Cover
mass
(kg)
CLASS
B125GROUP
2
KITEMARK
APPLICATION
Valiant C250 - 40T
Medium duty cover and frame in ductile iron.
Catalogue
Ref
CCVA76HK C250-40T 600x450 760x610 100 56 89
CCVA77HK C250-40T 600x600 760x760 100 69 106
186025 C250-40T 750x600 910x760 100 81 123
172789 C250-40T 900x600 1060x760 100 96 142
Tested to D400 loading
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass(kg)
BS EN124
Class
Valiant B125Medium duty cover and frame in ductile iron.Slide out design
CLASS
C250GROUP
3
KITEMARK
APPLICATION
CLASS
B125GROUP
2
KITEMARK
APPLICATION
Cover
mass(kg)
FEATURE
Catalogue
Ref
185949 B125 600x450 750x605 75 33 53
185958 B125 600x450 750x605 75 33 53
185959 B125 600x600 750x750 75 41 63
185963 B125 600x600 750x750 75 41 63
185964 B125 900x600 1070x770 75 59 89
185966 B125 900x600 1070x770 75 59 89Ventilated. Use loop handled lifting keys. Locking options also available
Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Depth
E
(mm)
Total
mass
(kg)
BS EN124
Class
Cover
mass
(kg)
8/10/2019 2 Access Covers and Gratings
15/32
63www.burdens.co.uk
Rapide Slide Out
USE: Recommended for use in pavements andpedestrian areas.
Catalogue
Ref
186464 B125 380x230 480x330 40 9 14
186466 B125 550x325 650x425 40 17 25
186535 B125 450x450 550x550 40 16 24
CBRA75GK B125 600x450 700x550 40 22 31
CBRA70CK B125 600x600 700x700 40 29 39
186551 B125 750x600 850x700 40 37 49
CBRA17GK B125 900x600 1000x700 50 27 69
CBRA18GK B125 1000x675 l100x775 50 32 80 186557 B125 1310x610 1410x710 50 36 90
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Cover
mass
(kg)
CLASS
B125GROUP
2
KITEMARK
APPLICATION
FEATURE
BriPave DI
USE: Recommended for use in domestic applicationse.g. driveways, patioareas and featuring
recessed cover for inll.
Catalogue
Ref
CBHY56QK B125 450 x 450 558 x 558 100 25 47
CBHY71QK B125 600 x 600 711 x 711 100 37 65
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Cover
mass
(kg)
CLASS
B125
GROUP
2KITEMARK
APPLICATION
Ductile Light Duty Recessed
USE: Recommendedfor use in domestic
applications, e.g.driveways, patio areasand featuring recessedcover for inll.
Catalogue
Ref
Double Seal
186894 B125 600x450 775x625 72 39 65
186899 B125 600x600 775x775 72 52 82
PLEASE NOTE:Screw down lockable covers are also available - please ask for further information.
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Cover
mass
(kg)
CLASS
B125GROUP
2
KITEMARK
APPLICATION
8/10/2019 2 Access Covers and Gratings
16/32
64 www.burdens.co.uk
Gully Grates
8/10/2019 2 Access Covers and Gratings
17/32
65www.burdens.co.uk
Aqua-Max Range
Easier, safer, more secure and highly efcient
Saint-Gobain PAM UK have always been at the forefront of product design anddevelopment, constantly pushing boundaries and with the new Aqua-Max grating,this theme continues.
Increased security
The Aqua-Max has an automatic passive spring locking system that secures thegrating firmly in place once it has been closed. This spring lock is standard on allAqua-Max products and is integrated into the grating itself.
A locking arm engages with a lug on the inside of the frame to preventunauthorised or accidental opening. A prising bar is required to lever the gratingopen at which point the locking arm elastically deects past the frame lug, allowingthe grating to be hinged open.
Increased safety
Saint-Gobain PAM UKs engineers have developed the markets rst truly captivehinged grating. Designers have generated a product that does not employ separatehinge pins.
The Aqua-Max grating is tted into the frame during manufacture and held securelyin place by a welded rear frame panel. This ensures that once assembled the gratingand frame cannot be separated even under the most arduous conditions.
Improved efciency
Aqua-Max has been designed with water absorption at the forefront of the engineersmind. The most efficient part of a grating is the area in immediate proximity to thekerb, where the vast majority of surface water is located during rainfall.
Designers have ensured that the Aqua-Max has a signicant water clearing areaadjacent to the kerb ensuring it is the most effective grating in its class.
Improved durability/lifespan Load Transfer System
In recognition of the importance of whole life costs in todays nancially prudent
environment, the Aqua-Max range has been exactingly designed with durability inmind. The frame incorporates the benets of the Load Transfer System (LTS) aswith the popular Opt-Emax and Inter-Ax ranges. In addition wedge seatings reduceand restrict grate movement which would otherwise lead to wear and ultimatelyto failure.
8/10/2019 2 Access Covers and Gratings
18/32
66 www.burdens.co.uk
Torrent D400
USE: Recommended for use in areas where high water absorption anddrainage is required. Designed for city roads carrying continuous heavytrafc.
Catalogue
Ref
185981 D400 1210 x 685 1385 x 850 100 4500 70* 203
185982 D400 1825 x 685 1985 x 850 100 6750 70* 300
* Grating mass per pair
Class Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Waterway
area
(cm2)
Total
mass
(kg)
Grating
mass
CLASS
D400
APPLICATION GROUP
4
KITEMARK
Catalogue
Ref
205864 D400 450 x 450 660 x 550 100 1240 R 47
205865 D400 450 x 450 660 x 550 150 1240 R 52
Kerb opening
Turnbuckle Retro-Fit locking kits with hex head bolts and Turnbuckle Retro-Fit locking kits
with SCS head bolts are available for this range. Please contact your local branch for further
details.
Class Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Depth
E
(mm)
Waterway
area
(cm2)
Total
mass
(kg)
HA102
ref
FEATURE CLASS
D400
APPLICATION GROUP
4
FEATURE
KITEMARK
Improved opening ergonomics
Compared to traditional lift-out gratings, the hinged Aqua-Max design gives quickand easy access for drain rodding and cleaning, with minimum required effort.
Aqua-Max D400
USE: Recommended for use in city roads carrying continuous heavytrafc where drainage efciency is essential - with the addition of acaptive hinge for ease of maintenance.
8/10/2019 2 Access Covers and Gratings
19/32
67www.burdens.co.uk
Watershed range
Manufactured from ductile iron, Watershed has been developed to meet therigours of todays traffic loadings, combining the benefits of both double triangularand hinged grates in one unit.
Thanks to its wedge seating, Watershed provides non-rock performance and thecaptive hinge and prising slot allow fast and easy access for maintenance.
The Watershed wedge seating operates in two directions and has seats to ensurethe security and location of the grate within the frame.
Large wedge seatings
Give Watershed enhanced stability and long-termperformance in the most arduous traffic conditions
Single-piece unit
Hinged for easy access
Captive hinge
For easy access with added security
Prising Slot
For easy opening
Large water area
Watershed has a largewater area to help clearsurface water quicklyfrom roads
Wedge Seat
Principle
Watershed D400
USE: Recommended foruse in city roads carryingcontinuous trafc,with the addition ofcaptive hinge for ease ofmaintenance.
Catalogue
Ref
187136* D400 370 x 430 575 x 630 100 980 48
EDWS43EK** D400 370 x 430 525 x 590 100 980 41
187139 D400 370 x 430 575 x 525 100 1020 41
187134 D400 370 x 430 575 x 525 100 1020 41
*Wide ange, kerb opening **Kerb opening Left hand opening Right hand opening
Depth
E
(mm)
Clear
Opening
AxB (mm)
Total
mass
(kg)
BS EN 124
Class
Waterway
Area
(cm2)
Over Base
CxD
(mm)
CLASS
D400GROUP
4
KITEMARK
APPLICATION
HA102 Ref. = R
8/10/2019 2 Access Covers and Gratings
20/32
68 www.burdens.co.uk
Waterway 2000 - D400
Large waterway areaprovides efcientwater removal in areassubject to highwater run-off e.g.,catchpits, motorwayverges, betweenverges andvalleys etc.
Waterway 2400 - D400
Very largewaterway area.Ideal for areaswhere high
levels of waterabsorption arerequired.
Catalogue
Ref
Catalogue
Ref
185976 D400 600x600 800x800 2000 100 57 89
185978* D400 600x600 720x800 2000 100 57 86
185980 D400 600x600 820x770 2000 150 57 99
*Three flange frame Grating mass per pair
211234 D400 880x415 1036x525 2400 100 82
Clear opening
A x B
(mm)
Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Over Base
C x D
(mm)
Depth
E
(mm)
Depth
(mm)
Total
mass
(kg)
Total
mass
(kg)
BS EN124
Class
BS EN124
Class
Grating
mass
(kg)
Waterway
area
(cm2)
Waterway
area
(cm2)
CLASS
D400
CLASS
D400
GROUP
4
GROUP
4
KITEMARK
KITEMARK
APPLICATION
APPLICATION
FEATURE
FEATURE
Waterway 1200 - D400
USE: In the city and trunkroads carrying continuousheavy trafc and inareas prone to excessivetrafc clipping (e.g. kerbs
roundabouts, etc.)
Catalogue
Ref
185972 D400 435x435 587x525 100 1200 43
Clear opening
A x B
(mm)
Over Base
C x D
(mm)
Depth
E
(mm)
Total
mass
(kg)
BS EN124
Class
Waterway
Area
(cm2)
CLASS
D400GROUP
4
KITEMARK
APPLICATION
FEATURE
8/10/2019 2 Access Covers and Gratings
21/32
69www.burdens.co.uk
Ax-S D400
USE: For city roads where ahinged and lockable grating isrequired.
Catalogue
Ref
EDAX60DKX12 D400 600Dia. 850x850 100 1190 32 58
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Grating
mass
(kg)
Waterway
area
(cm2)
Victoria D400
USE: Heavy and medium duty applications.
Catalogue
Ref
EDVA45EK D400 400x445 550x535 100 980 44
EDVA44EK* D400 400x445 550x535 100 910 41
*Mesh type grating (pedestrian).
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Waterway
area
(cm2)
CLASS
D400GROUP
4
KITEMARK
APPLICATION
FEATURE
CLASS
D400GROUP
4
KITEMARK
APPLICATION
Rexus D400
USE: Recommended for use in city roads carrying continuous heavytrafc where efcient water removal is required with the addition of acaptive hinge for ease of maintenance.
Catalogue
Ref
211607* D400 600 x 600 800 x 714 100 1870 Q 85
211608** D400 600 x 600 800 x 714 100 1870 Q 85
211145 D400 600 x 600 800 x 800 100 1870 Q 88
*Three anges, right hand opening **Three anges, left hand opening Four anges, kerb opening
Class Clear opening
A x B(mm)
Over Base
C x D(mm)
Depth
E(mm)
Waterway
area(cm2)
Total
mass(kg)
HA102
ref
FEATURE CLASS
D400
APPLICATION GROUP
4
FEATURE
KITEMARK
8/10/2019 2 Access Covers and Gratings
22/32
70 www.burdens.co.uk
Waterow - C250
USE: City and estateroads where regular
access for cleaning is
required.
Catalogue
Ref
187127 186863 C250 325x312 475x400 75 787 22
187130 186864 C250 325x437 475x524 75 933 29
187132 186865 C250 400x432 550x530 75 1128 33
Left hand opening (all range)
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Code
with spring
clip locking
Waterway
area
(cm2)
CLASS
C250GROUP
3
KITEMARK
APPLICATION
Watershed C250
USE: Recommended foruse in local access roadscarrying continuous trafc,where hinged access isrequired.
Catalogue
Ref
187140 C250 380x400 525x490 75 940 28
Kerb opening
Depth
(mm)
Clear
Opening
AxB (mm)
Total
mass
(kg)
BS EN 124
Class
Waterway
Area
(cm2)
Cover Base
(mm)
CLASS
C250GROUP
3
KITEMARK
APPLICATION
Aquafall - D400
USE: Heavy and mediumduty applications.
Catalogue
Ref
EDAF33EK D400 360x310 510x410 100 765 29
EDAF44EK D400 440x430 550x520 100 1223 38
EDAF53EK D400 500x350 645x440 100 1080 46
Left hand opening (all range)
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Waterway
area
(cm2)
CLASS
D400GROUP
4
KITEMARK
APPLICATION
8/10/2019 2 Access Covers and Gratings
23/32
71www.burdens.co.uk
Pedestrian - C250
USE: Pedestrianisedareas with optimum carefor public safety (e.g.pedestrians, disabled,children, cyclists).
Catalogue
Ref
187126 186862 C250 325x312 475x400 75 655 22
187161 186854 C250 430x370 525x525 100 830 37
Left hand opening (all range)
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Waterway
area
(cm2)
Code
with spring
clip locking
CLASS
C250GROUP
3
KITEMARK
APPLICATION
Watergate - C250
USE: City roads where
regular access for clean-
ing is required and a
100mm deep frame isrequired.
Catalogue
Ref
187158 186852 C250 370x305 525x400 100 735 29
187160 186853 C250 370x430 525x525 100 1085 37
187162 186855 C250 510x360 664x454 100 1184 41
Left hand opening (above codes). Right hand opening available on request.
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Code
with spring
clip locking
Waterway
area
(cm2)
CLASS
C250GROUP
3
KITEMARK
APPLICATION
CatalogueRef
176019 B125 220x220 300x300 60 300 9
186039 B125 300x300 375x375 60 575 13
Clear opening
(mm)
Over Base
(mm)
Depth
(mm)
Totalmass
(kg)
BS EN124Class
Waterwayarea
(cm2)
GROUP
2
KITEMARK
APPLICATION
Aquao - B125
USE: Concave grating for use in pedestrian areas. CLASS
B125
8/10/2019 2 Access Covers and Gratings
24/32
72 www.burdens.co.uk
Kerb Drainage
8/10/2019 2 Access Covers and Gratings
25/32
73www.burdens.co.uk
Aquakerb - D400
Catalogue
Ref
186040 D400 Half Batter 555x400 150 - 475 45
186042 D400 45 Splay 555 x 400 150 - 425 44
186041 - subframe to suit 186040 and 186042
187120 - road retaining bar
Kerb
prole
Over base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Depth with
sub frame
E2 (mm)
Water
way
(cm2)
CLASS
D400GROUP
4
APPLICATION
KITEMARK
USE: Kerb drain-
age unit for use in
pavement kerbs
adjacent to high-
ways. Units locked
as standard.
Waterfall
USE: Kerb drainage
unit for use in pave-
ment kerbs adja-
cent to highways.
Catalogue
Ref
187067 C250 400x250 550x360 190 YES NO 43
187068* Heavy Duty 532x405 562x465 205 EXTRA YES 63
187066* Heavy Duty 532x405 562x465 205 EXTRA NO 63
*Not kitemarked
Clear opening
(mm)
Over base
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Road
retaining
bar
Debris
grid
(cm2)
CLASS
C250GROUP
3
APPLICATION
KITEMARK
Watergate Kerb
USE: When used with Watergate gratings, gives
a traditional combination of road grating and
kerb drainage unit.
USE: Kerb hood which, used with Watergate
gratings, givesa traditional combination of road
grating and kerb drainage unit.in pavement
Catalogue
Ref
187070 C250 340x122 540x190 245 12.5 25
187071 C250 340x122 540x190 245 45 20
Clear opening
(mm)
Base size
(mm)
Depth
(mm)
Total
mass
(kg)
BS EN124
Class
Batter
CLASS
C250GROUP
3
APPLICATION
KITEMARK
8/10/2019 2 Access Covers and Gratings
26/32
74 www.burdens.co.uk
The Selecta kerb gully drainage unit in ductile iron with opening top andgrating for optimum access, is the professionals solution to the problem ofdraining rainwater.
Available in two sizes and two proles: Selecta Maxi and Selecta 500,Selecta units have been designed to ensure drainage performance whilstmaximising safety.
Screening of debris
A raised bar limits access to the sewer system for larger debris and some
objects carried by run-off water.
Anti-Obstruction
The surfaces of the bars are equipped with facets that are oriented to preventleaves or litter from blocking the drain.
Drainage
In the lower section of the gutter, the barsare arranged longitudinally in order tomaximise water drainage.
Operation
Full opening with two aps providesa wide unobstructed clear opening area tothe sewer system, well suited to the insertion of
cleaning or inspection equipment.
Opening
Both Selecta Maxi and 500 feature vandal resistant ductile iron spring barsto prevent unauthorised entry.
Grating and covers can be opened separately or together using a crow bar or
pick axe to obtain full access.
Closing
Applying a little pressure to the top of the cover or grating will ensurethat the spring bar activates and again provides an effective barrier againstunauthorised access.
Safety for Cyclists and Pedestrians
On the carriageway, the bars are perpendicular to the direction of the trafcin order to ensure safety for cyclists.
On the pavement side, the elimination of clearance on the hinge system andof any roughness on the surface of the cover ensures safety for pedestrians.
Selecta range
Selecta Maxi
Urban T profile
8/10/2019 2 Access Covers and Gratings
27/32
75www.burdens.co.uk
Catalogue
Ref
ECSE61TF C250 570x610 205 90 37 56.5
Half batter rural profile (45) also available. For further information please contact your local
branch.
Over frame
(mm)
Frame
depth
(mm)
Grate
depth
(mm)
Total
mass
(kg)
BS EN124
Class
Kerb
prole
CLASS
C250GROUP
3
APPLICATION
MARK
Selecta 500 Urban Prole T
USE: Kerb drain-
age unit for use
in pavement
kerbs adjacent tohighways in urban
applications..
Selecta Maxi Urban Prole T
USE: Kerb drain-
age unit for use in
pavement kerbs
adjacent to high-
ways in urban
applications where
height adjustmentis desired.
Catalogue
Ref
ECSE75UFX11 C250 750x640 175-225 90 37 94.0
Half batter rural profile (45) also available. For further information please contact your local
branch.
Over frame
(mm)
Frame
depth
(mm)
Grate
depth
(mm)
Total
mass
(kg)
BS EN124
Class
Kerb
prole
CLASS
C250GROUP
3
APPLICATION
MARK
8/10/2019 2 Access Covers and Gratings
28/32
76 www.burdens.co.uk
Surface Boxes
8/10/2019 2 Access Covers and Gratings
29/32
77www.burdens.co.uk
Warrior Surface Box
The Warrior surface box has been specically designed to offer fast and easyaccess to emergency and below-ground services. Manufactured from ductileiron and incorporating the large wedge seating principle, the Warrior surfacebox offers long term stability and performance.
Conformity
The Warrior surface box fully meets the requirements of BS 5834 Part 3,1985 and the performance requirements of BS 750 1984. Certied with theBSI Kitemark for quality.
Large wedge seatingsOffer non-rock performance and greater stability under heavy traffic loading.The Warrior wedge seating operates in two directions and has seals to ensurethe security and location of the cover within the frame.
Wedge Seat Principle
Prising Slots
Located at both front and rear of unit for easy opening and fast access toservices.
Badging
SV and FH standard badges are available. Contact us for other individualbadge requirements.
Security
Safety chains can be fitted for added security.
Positive Register
A register is designed into thewedge seat for positive locating
each time the cover is closed.Unique single-piece
Non-rock, heavy duty design.
Bonding ribs
To increase the adhesionbetween casting
and bedding mortar.High-performancepolyester resin mortaris recommended forinstallation of this unit.
8/10/2019 2 Access Covers and Gratings
30/32
78 www.burdens.co.uk
Warrior
USE: Recommended for use as
a heavy duty, fast access surface
box for use in city trunk roads
carrying heavy trafc.
Catalogue
Ref
FSWA15CK 186963 A 150x150 225x225 100 8.5
186986 186987 A 150x150 260x245 225 14 186972 186973 A 225x225 325x325 100 14
186980 186981 A 300x300 400x400 100 20
FSWA32EK 168303 A 380x230 505x355 125 26
FSWA32EKX19* - A 380x230 505x355 125 26
* No Keyways. Badge FH as standard. Available with yellow coating
Use T-handled lifting key on all units except FSWA32EKX19 where a prising bar is required.
BS 5834
grade
Clear opening
(mm)
Over
base
Total
mass
(kg)
Code with
security
chain
Depth
(mm)
Warrior - Wide Flange
USE: Recommended for use as
a heavy duty, fast access surface
box for use in city trunk roads
carrying heavy trafc. With
wider ange to prevent lateral
movements.
Catalogue
Ref
186935 186936 A 380x230 535x385 125 27
BS 5834
grade
Code with
security
chain
Clear opening
(mm)
Over
base
Total
mass
(kg)
Depth
(mm)
Double Triangular
USE: Recommended for use
in areas subject to heavy
loading but not subject to
fast moving through trafc.
Catalogue
Ref
168306 186921 A 430x280 550x400 100 38
Use loop handled lifting keys
BS 5834
grade
Clear opening
(mm)
Over
base
Total
mass
(kg)
Secured by
2 chains
Depth
(mm)
KITEMARK
GRADE
A
APPLICATION
FEATURE
KITEMARK
GRADE
A
APPLICATION
KITEMARK
GRADE
A
APPLICATION
FEATURE
8/10/2019 2 Access Covers and Gratings
31/32
79www.burdens.co.uk
Hinged Pavement Surface Box
USE: Recommended for
use in pavements and other
pedestrian areas where
hinged access is required.
Catalogue
Ref
187022 MEDIUM DUTY 135x125 215 Dia. 75 - 4.2
187032 MEDIUM DUTY 180 Dia 275x275 60 - 7.6
187029* MEDIUM DUTY 180 Dia. 240x240 110 202 8.5
*Spigot base
BS 5834
grade
Clear opening
AxB
(mm)
Over base
CxD
(mm)
Total
mass
(kg)
Depth
E
(mm)
Spigot
I/D
F
GRADE
MEDIUM
DUTY
APPLICATION
The standard badges for manhole and access covers are FW (FoulWater) or SW (Surface Water). For details of standard badging forsurface boxes, see tables below.
Badging
Special Badging of castings to individual customer requirements is alsoavailable, dependent on specific order quantities and suitability of par-
ticular designs. Please contact us.
8/10/2019 2 Access Covers and Gratings
32/32
SHIMPAC
Planks & Collars
Designed for carriageway and footpath ironwork support.
SHIMPAC Planks & Collars are the best alternative to cut bricks andtiles when re-bedding manhole/gully frames and covers. Made fromcompressed cement and wood fibre, they are non-combustible and
will not rot, making them ideal for permanent shuttering. They arequick and easy to install using traditional, fast setting, polyester basedand epoxy based mortars.
Stays level
High compressive strength Compatible with all mortars Simple and quick to install Spreads trafc loading Absorbs shock - no weak spots 3 standard thicknesses:
12mm, 24mm and 40mm Minimises trafc disruption
Highway Maintenance Products
Size12mm 24mm 40mmmm
610 x 100 4 4 4
610 x 150 4 4 4
675 x 100 4 4 4
675 x 150 4 4 4
690 x 100 4 4 4
740 x 150 4 4 4 810 x 100 4 4 4
875 x 100 4 4 4
915 x 150 4 4 4
975 x 150 4 4 4
1000 x 100 4 4 4
1050 x 150 4 4 4
Planks
Size125 Aperture 150 Aperture
mm
250 x 200 x 12 4 -
250 x 200 x 24 4 -
250 x 250 x 12 - 4
300 x 300 x 12 - 4
Collars
HAUC approved cold lay macadam for permanent reinstatements toclass 3 and 4 carriageways.
Description Size
Ultracrete M60 Cementitious Manhole Leveller 25kg
Manhole Leveller
Description Size
Instant Road Repair
Iron Interaction Bedding Mortar
LTS Polyester Resin Bedding Mortar Size
Bedding Mortar 25kg