SCALE 1:10
50
CARRIAGEWAY
SEALED WITH HOT BITUMEN PAINT
EXISTING CARRIAGEWAY NEW CARRIAGEWAY
50
PROJECT:
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10. WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
Mr and Mrs De Jager
PROJECT:
AND SOAKAWAYS ARE CHOSEN IN ACCORDANCE WITH DETAIL EF
2.00m
3.40m
2.95m
3.60m
3.15m
4.35m
3.35m
1.75m
2.50m
2m
2.45m
2.95m
2.80m
LEGEND
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10. WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
Mr and Mrs De Jager
PROJECT:
Scale 1:50
Scale 1:50
i=0.03m/m`
L=1.95m
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
DRAWING TITLE:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-12
AutoCAD SHX Text
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
DRAWING TITLE:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-13
AutoCAD SHX Text
Scale 1:50
Scale 1:50
AXONOMETRIC VIEW
Scale 1:50
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
AXONOMETRIC VIEW
DRAWING TITLE:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-14
AutoCAD SHX Text
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
Scale 1:25
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10. WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
Mr and Mrs De Jager
PROJECT:
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10. WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
Mr and Mrs De Jager
PROJECT:
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10. WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
Mr and Mrs De Jager
PROJECT:
175 VC
110 UPVC
Q=0.79/s
V=0.82m/s
h/d=16
110 UPVC
Q=2.79l/s
V=1.14m/s
h/d=30
Q=0.79l/s
Q=2.00l/s
Q=0.79l/s
Q=0.79l/s
Q=2.00l/s
Q=2.00l/s
110 UPVC
Q=3.58l/s
V=1.21m/s
h/d=36
110 UPVC
Q=5.58l/s
V=1.38m/s
h/d=44
110 UPVC
Q=6.37l/s
V=1.43m/s
h/d=47
110 UPVC
Q=8.37l/s
V=1.53m/s
h/d=56
Q=7.22l/s
175 VC
Q=2.11l/s
Q=1.01l/s
Q=1.01l/s
175 VC
Q=0.79l/s
Q=2.00l/s
Q=6.24l/s
110 UPVC
Q=9.03l/s
V=1.56m/s
h/d=59
110 UPVC
Q=0.79/s
V=0.82m/s
h/d=16
110 UPVC
Q=2.79l/s
V=1.14m/s
h/d=30
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-27
AutoCAD SHX Text
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
AND DETAILS FOR CONSTRUCTION.
SITE BEFORE COMMENCING WORK
TO THE ATTENTION OF THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING
REGULATIONS, BRITISH STANDARDS & CODES OF
PRACTICE AND NHBC STANDARDS
WITH ALL RELEVANT DESIGNER, ENGINEER OR
SPECIALIST DRAWINGS AND SPECIFICATIONS
OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN
STRICT COMPLIANCE WITH THE RELEVANT
MANUFACTURER'S RECOMMENDATIONS
NECESSARY TEMPORARY SUPPORT TO THE BUILDING
AND ANY ADJACENT STRUCTURES.
STRUCTURAL NATURE. A SET OF THESE CALCULATIONS
SHOULD BE SUBMITTED TO AN APPROVED INSPECTOR
OR LOCAL AUTHORITY BUILDING CONTROL FOR
APPROVAL UNDER THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION
IS MADE FOR FULL PLANS BUILDING REGULATION
APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS
THESE BACK TO US FOR CONSIDERATION. THERE IS A
RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS
IMPORTANT TO SEEK APPROVAL PRIOR TO COMMENCING
ANY WORK.
STRUCTURE. WE HAVE NOT CONSIDERED THE
STRUCTURAL ADEQUACY OF OTHER PARTS OF THE
BUILDING EXCEPT THOSE DIRECTLY AFFECTED BY THE
PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN
PROJECT:
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
DRAWING TITLE:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-31
AutoCAD SHX Text
OVER 100mm TIMBER, FROZEN MATERIAL
1 2 5
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
DRAWING TITLE:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-32
AutoCAD SHX Text
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-33
AutoCAD SHX Text
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
SELECTED FILL OR GRANULAR FILL
FREE FROM STONES LARGER THAN 40mm
SELECTED FILL FREE FROM STONES
LARGER THAN 40mm, LUMPS OF CLAY
OVER 100mm TIMBER, FROZEN MATERIAL
AND VEGTABLE MATTER
IMPERIUM ENGINEERING NOTES
1. THE CONTRACTORS SHALL MAKE HIS OWN MEASURED SURVEY OF THE SITE TO
DETERMINE PRECISE LENGTHS AND DETAILS FOR CONSTRUCTION.
2. THE CONTRACTOR MUST CHECK ALL DIMENSIONS ON SITE BEFORE
COMMENCING WORK
3. ANY DISCREPANCIES MUST BE IMMEDIATELY BROUGHT TO THE ATTENTION OF
THE DESIGNER
4. ALL WORK MUST CONFORM TO CURRENT BUILDING REGULATIONS, BRITISH
STANDARDS & CODES OF PRACTICE AND NHBC STANDARDS
5. THESE DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ALL RELEVANT
DESIGNER, ENGINEER OR SPECIALIST DRAWINGS AND SPECIFICATIONS
6. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS STATED OTHERWISE
7. ALL MATERIALS ARE TO BE USED AND INSTALLED IN STRICT COMPLIANCE WITH
THE RELEVANT MANUFACTURER'S RECOMMENDATIONS
PROJECT:
8. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY
TEMPORARY SUPPORT TO THE BUILDING AND ANY ADJACENT STRUCTURES.
9. BUILDING REGULATIONS APPLY TO ALL WORKS OF A STRUCTURAL NATURE. A
SET OF THESE CALCULATIONS SHOULD BE SUBMITTED TO AN APPROVED
INSPECTOR OR LOCAL AUTHORITY BUILDING CONTROL FOR APPROVAL UNDER
THE BUILDING REGULATIONS.
10.WE WOULD RECOMMEND THAT AN EARLY APPLICATION IS MADE FOR FULL PLANS
BUILDING REGULATION APPROVAL. SHOULD BUILDING CONTROL MAKE ANY
COMMENTS ON THE STRUCTURAL DESIGN PLEASE PASS THESE BACK TO US FOR
CONSIDERATION. THERE IS A RISK THAT THEY MAY RAISE QUERIES WHICH WILL
REQUIRE AN AMENDMENT TO OUR DESIGN SO IT IS IMPORTANT TO SEEK
APPROVAL PRIOR TO COMMENCING ANY WORK.
11.THESE DRAWINGS RELATE ONLY TO THE PROPOSED WORKS AND THEIR EFFECT
ON THE BUILDING STRUCTURE. WE HAVE NOT CONSIDERED THE STRUCTURAL
ADEQUACY OF OTHER PARTS OF THE BUILDING EXCEPT THOSE DIRECTLY
AFFECTED BY THE PROPOSED WORKS OR OTHER AREAS WHERE THE
CALCULATIONS SPECIFICALLY IDENTIFY DESIGN CHECKS.
AutoCAD SHX Text
Dwg No. 2066-02-34
AutoCAD SHX Text