Post on 15-Jan-2016
10. Organohalides
2
Why this Chapter?
Reactions involving organohalides are less frequently encountered than other organic compounds, but reactions such as nucleophilic substitutions/eliminations that they undergo will be encountered
Alkyl halide chemistry is model for mechanistically similar but more complex
3
What Is an Alkyl Halide
An organic compound containing at least one carbon-halogen bond (C-X) X (F, Cl, Br, I) replaces H
Can contain many C-X bonds Properties and some uses
Fire-resistant solvents Refrigerants Pharmaceuticals and precursors
4
10.1 Naming Alkyl Halides
Find longest chain, name it as parent chain (Contains double or triple bond if present) Number from end nearest any substituent (alkyl or
halogen)
Number all halogens and list different in alphabetical order.
5
6
Naming if Two Halides or Alkyl Are Equally Distant from Ends of Chain
Begin at the end nearer the substituent whose name comes first in the alphabet
Common Names
Treat halogen as parent with alkyl side group
7
Learning Check:
Give names for the following:
8
Solution:
Give names for the following:
9
Iodobutane(butyl iodide) 1-chloro-3-methylbutane
(isopentyl chloride)1,5-dibromo-2,2-dimethylpentane
1,3-dichloro-3-methylbutane
1-chloro-3-ethyl-4-iodopentane
2-bromo-5-chlorohexane
10
10.2 Structure of Alkyl Halides C-X bond is longer as you go down periodic table C-X bond is weaker as you go down periodic table C-X bond is polarized with slight positive on
carbon and slight negative on halogen
11
10.3 Preparing Alkyl Halides from Alkenes: Alkyl halide from addition of HCl, HBr, HI to alkenes
to give Markovnikov product (see Alkenes chapter)
Alkyl dihalide from anti addition of bromine or chlorine
12
10.3 Preparing Alkyl Halides from Alkanes: Radical Halogenation Alkane + Cl2 or Br2, heat or light replaces C-H with C-
X but gives mixtures Hard to control Via free radical mechanism
It is usually not a good idea to plan a synthesis that uses this method
13
Radical Halogenation of Alkanes
If there is more than one type of hydrogen in an alkane, reactions favor replacing the hydrogen at the most highly substituted carbons (not absolute)
9 1o H’s1 3o H
So would expect 10:90 ratio if # of H’s was sole factor
14
Relative Reactivity: Chlorination Based on quantitative analysis of reaction products,
relative reactivity is estimated Order parallels stability of radicals
15
Relative Reactivity: Chlorination
1 3o H9 1o H’s
So would expect 10:90 ratio if # of H’s was sole factor
1 3o H 1 x 5 = 59 1o H’s 9 x 1 = 9
So would predict 5:9 ratio
Or 5/14 : 9/14 = 35.7: 64.3
Learning Check:
Predict ratio of mono-chlorinated butanes
16
Solution:
Predict ratio of mono-chlorinated butanes
17
6 1o H’s4 2o H’s
So would expect 60:40 ratio if # of H’s was sole factor
6 1o H’s 6 x 1 = 64 2o H’s 4 x 3.5 = 14
So would predict 6:14 ratio
Or 6/20 : 14/20 = 30: 70
Learning Check:
18
How many constitutional isomers will form in the radical mono-chlorination of 2,3-dimethylpentane?
1. 3
2. 4
3. 5
4. 6
5. 7
1. 3
2. 4
3. 5
4. 6
5. 7
Solution:
19
How many constitutional isomers will form in the radical mono-chlorination of 2,3-dimethylpentane?
Learning Check:
20
The selectivity of chlorine radical is 1.0 : 3.5 : 5.0 for 1°, 2° and 3° hydrogens, respectively. If only monochlorides were to form in the radical chlorination of 1,3-dimethylcyclobutane, what is the expected yield of the tertiary chloride?
1. 1/6
2. 1/5
3. 1/4
4. 1/3
5. 1/2
Solution:
21
The selectivity of chlorine radical is 1.0 : 3.5 : 5.0 for 1°, 2° and 3° hydrogens, respectively. If only monochlorides were to form in the radical chlorination of 1,3-dimethylcyclobutane, what is the expected yield of the tertiary chloride?
1. 1/6
2. 1/5
3. 1/4
4. 1/3
5. 1/2
22
Reaction distinction is more selective with bromine than chlorine
Relative Reactivity: BrominationBromination
23
Relative Reactivity: BrominationBromination
Formation of C radical more costly with Br. So Br more picky thus more selective.
Learning Check:
24
Which of these radicals is expected to be the least selective?
1. HO•
2. F•
3. Cl•
4. Br•
5. I•
Solution:
25
Which of these radicals is expected to be the least selective?
1. HO•
2. F•
3. Cl•
4. Br•
5. I•
Allylic position more reactive
26
10.4,5 Preparing Alkyl Halides from Alkenes: Allylic Bromination
Allylic radical stabilized by resonance
27
Allylic Stabilization Allyl radical is delocalized More stable than typical alkyl radical by 40 kJ/mol (9 kcal/mol) Allylic radical is more stable than tertiary alkyl radical
28
Allylic Bromination: NBS
N-bromosuccinimide (NBS) selectively brominates allylic positions
Requires light Requires light for activation A source of dilute bromine atoms
29
Allylic Bromination: NBS
Product mix favors more substituted C=C and less hindered Br
30
Allylic Bromination: NBS
Examples:
31
NBS
CH3
Br
CH3
Br
CH3
Br
CH2 Br
CH2Br
32
Use of Allylic Bromination
Allylic bromination with NBS creates an allylic bromide
Reaction of an allylic bromide with base produces a conjugated diene, useful in synthesis of complex molecules
Learning Check: Predict the products of allylic bromination w/ NBS
33
NBS
NBS
Solution: Predict the products of allylic bromination w/ NBS
34
NBS
NBS
CH3Br
CH3
Br
+
CH3 C
CH3
CH CH CH2 CH3
Br
CH3 C
CH3
CH CH CH2 CH3
Br
CH3 C
CH3
CH CH CH CH3
H Br
CH3 C
CH3
CH CH CH CH3
H Br
35
10.6 Preparing Alkyl Halides from Alcohols Reaction of tertiary C-OH with HX is fast and
effective Add HCl or HBr gas into ether solution of tertiary alcohol
Primary and secondary alcohols react very slowly and often rearrange, so alternative methods are used
Example:
36
Alkyl Halides from Alcohols
37
Alternative methods for slow primary and secondary alcohols to avoid rearrangements.
Learning Check:
Prepare the following from alcohols
38
Solution:
Prepare the following from alcohols
39
HClHCl
PBr3 PBr3
CH3 C
CH3
CH3
OH CH3 CH CH2 CH CH3
OH CH3
CH2 CH2 CH2 CH CH3
CH3
CH2
OH
CH2 CH CH2 C CH3CH3
CH3
CH3
OH
40
10.7 Reactions of Alkyl Halides: Grignard Reagents Reaction of RX with Mg in ether or THF Product is RMgX – an organometallic compound (alkyl-metal
bond) R is alkyl 1°, 2°, 3°, aryl, alkenyl X = Cl, Br, I
Grignard Reagents Forms a basic/nucleophilic Carbon
41
Example:
42
10.8 Organometallic Coupling Reactions Alkyllithium (RLi) forms from RBr and Li metal
RLi reacts with copper iodide to give lithium dialkylcopper (Gilman reagents)
Lithium dialkylcopper reagents react with alkyl halides to give alkanes
Examples:
43
44
Utility of Organometallic Coupling in Synthesis Coupling of two organometallic molecules produces larger molecules
of defined structure Aryl and vinyl organometallics also effective Coupling of lithium dialkylcopper molecules proceeds through
trialkylcopper intermediate
Palladium-catalyzed Tributyltin chloride Works well with aryl or vinyl halides
45
46
10.9 Oxidation and Reduction in Organic Chemistry
In organic chemistry, we say that oxidation occurs when a carbon or hydrogen that is connected to a carbon atom in a structure is replaced by oxygen, nitrogen, or halogen
Oxidation is a reaction that results in loss of electron density at carbon (as more electronegative atoms replace hydrogen or carbon)
Oxidation: break C-H (or C-C) and form C-O, C-N, C-X
Oxidation = LEO Gaining an Oxygen Or Losing a Hydrogen
47
Reduction Reactions
Organic reduction is the opposite of oxidation Results in gain of electron density at carbon (replacement of
electronegative atoms by hydrogen or carbon)
Reduction: form C-H (or C-C) and break C-O, C-N, C-X
Reduction = GER Losing an Oxygen Or Gaining a Hydrogen
48
Oxidation Levels
Functional groups are associated with specific levels
CH4
-4 -3 0-2 +2 +4
Examples:
49
Examples:
50
Learning Check:
51
Which of these is not a redox reaction?
1. x
2. x
3. x
4. x
5. x
HCl Cl
Br2 Br
Br
H2
Pd
NBS
H2O/DMSO
OH
Br
HO1. OsO4
2. NaHSO3/H2O
OH
Solution:
52
Which of these is not a redox reaction?
1. x
2. x
3. x
4. x
5. x
HCl Cl
Br2 Br
Br
H2
Pd
NBS
H2O/DMSO
OH
Br
HO1. OsO4
2. NaHSO3/H2O
OH
Biological Halides
53
Learning Check:
54
Radical chlorination of (2R)-fluorobutane yields 2-chloro-3-fluorobutane as one of the products. Which is the best prediction for the stereochemistry of this product?
1. two enantiomers in equal amounts
2. two diastereomers in different amounts
3. two diastereomers in equal amounts
4. four stereoisomers, in different amount each
5. four stereoisomers, with enantiomeric pairs in equal amounts, but diastereomeric pairs in non-equal amounts
1. two enantiomers in equal amounts
2. two diastereomers in different amounts
3. two diastereomers in equal amounts
4. four stereoisomers, in different amount each
5. four stereoisomers, with enantiomeric pairs in equal amounts, but diastereomeric pairs in non-equal amounts
Solution:
55
Radical chlorination of (2R)-fluorobutane yields 2-chloro-3-fluorobutane as one of the products. Which is the best prediction for the stereochemistry of this product?
Learning Check:
56
Which mechanistic step determines the regiochemistry of the radical-chain chlorination of 2-methylpropane?
1. protonation step
2. hydrogen abstraction step
3. chlorine abstraction step
4. chloride addition step
5. initiation step
Solution:
57
Which mechanistic step determines the regiochemistry of the radical-chain chlorination of 2-methylpropane?
1. protonation step
2. hydrogen abstraction step
3. chlorine abstraction step
4. chloride addition step
5. initiation step
1. The electronegativity of halogens in alkyl halides is nearly constant.
2. The inductive effects are counterbalanced by hyperconjugation.
3. The electronegativity effects are counterbalanced by bond strengths.
4. Lone-electron pairs are more delocalized on smaller halogens.
5. The charge-separation and bond-lengths trends have opposite effects.
Learning Check:
58
Dipole moments of CH3–X are 1.85, 1.87, 1.81, and 1.62 D for F, Cl, Br, and I, respectively. What is the best explanation of the small differences in dipole moments?
1. The electronegativity of halogens in alkyl halides is nearly constant.
2. The inductive effects are counterbalanced by hyperconjugation.
3. The electronegativity effects are counterbalanced by bond strengths.
4. Lone-electron pairs are more delocalized on smaller halogens.
5. The charge-separation and bond-lengths trends have opposite effects.
Solution:
59
Dipole moments of CH3–X are 1.85, 1.87, 1.81, and 1.62 D for F, Cl, Br, and I, respectively. What is the best explanation of the small differences in dipole moments?
Learning Check:
60
Which of the following is not the product of the radical chain-reaction of 2-pentene with NBS?
1. 2. 3. 4.
Solution:
61
Which of the following is not a product of the radical chain-reaction of 2-pentene with NBS?
1. 2. 3. 4.
Learning Check:
62
What is the best reagent to carry out the following transformation?
Br
1. PBr3
2. HBr
3. NBS/hv/CCl44. Br2/hv
5. NBS/H2O/DMSO
Solution:
63
What is the best reagent to carry out the following transformation?
Br
1. PBr3
2. HBr
3. NBS/hv/CCl44. Br2/hv
5. NBS/H2O/DMSO
Learning Check:
64
What is the best reagent to carry out the following transformation?
OH Br
1. PBr3
2. HBr/ether
3. NBS/hv/CCl44. Br2/hv
5. NBS/H2O/DMSO
Solution:
65
What is the best reagent to carry out the following transformation?
OH Br
1. PBr3
2. HBr/ether
3. NBS/hv/CCl44. Br2/hv
5. NBS/H2O/DMSO
Learning Check:
66
Which sequence of reagents is best to accomplish the following transformation?
1. KOH followed by BD3/THF
2. KOH followed by NaBH4
3. Mg/ether followed by D2O
4. Li/pentane followed by D2/CuI
5. NaNH2 followed by D2/Pd
Br D
Solution:
67
Which sequence of reagents is best to accomplish the following transformation?
1. KOH followed by BD3/THF
2. KOH followed by NaBH4
3. Mg/ether followed by D2O
4. Li/pentane followed by D2/CuI
5. NaNH2 followed by D2/Pd
Br D
Learning Check:
68
The selectivity of chlorine radical is 1.0 : 3.5 : 5.0 for 1°, 2° and 3° hydrogens, respectively. Assuming that only monochlorides are produced in the radical chain chlorination of 2,3-dimethybutane, what would be the expected ratio of the two isomeric alkyl chlorides formed in the reaction?
1. 1/6
2. 1/4
3. 1/2
4. 3/5
5. 5/6
Solution:
69
The selectivity of chlorine radical is 1.0 : 3.5 : 5.0 for 1°, 2° and 3° hydrogens, respectively. Assuming that only monochlorides are produced in the radical chain chlorination of 2,3-dimethybutane, what would be the expected ratio of the two isomeric alkyl chlorides formed in the reaction?
1. 1/6
2. 1/4
3. 1/2
4. 3/5
5. 5/6
Learning Check:
70
The reaction shown produces 5 different bromides. Which of the compounds listed is one of the expected products?
1. 2. 3.
4. 5.
NBS
CCl4
Solution:
71
The reaction shown produces 5 different bromides. Which of the compounds listed is one of the expected products?
1. 2. 3.
4. 5.
NBS
CCl4
Learning Check:
72
Which of the following molecules would not yield an organolithium reagent when treated with Li in pentane?
1. iododecane
2. 4-bromo-1-pentanol
3. phenyl bromide
4. 4-bromobutyl methyl ether
5. cyclohexylbromide
Solution:
73
Which of the following molecules would not yield an organolithium reagent when treated with Li in pentane?
1. iododecane
2. 4-bromo-1-pentanol
3. phenyl bromide
4. 4-bromobutyl methyl ether
5. cyclohexylbromide
Learning Check:
74
What is the IUPAC name of the following molecule?
1. 2,4-dimethylheptyl-6-chloride
2. 2,4,6-trimethyl-6-chlorohexane
3. 2-chloro-4,6-dimethylheptane
4. 1-chloro-1,3,5-trimethylhexane
5. 2-chloro-4-methyl-isoheptane
Cl
Solution:
75
What is the IUPAC name of the following molecule?
1. 2,4-dimethylheptyl-6-chloride
2. 2,4,6-trimethyl-6-chlorohexane
3. 2-chloro-4,6-dimethylheptane
4. 1-chloro-1,3,5-trimethylhexane
5. 2-chloro-4-methyl-isoheptane
Cl
Learning Check:
76
What is the product of the following sequence of reactions?
1. 2. 3.
4. 5.
I
2Li
pentane
CuI
ether
I
ether
Solution:
77
What is the product of the following sequence of reactions?
1. 2. 3.
4. 5.
I
2Li
pentane
CuI
ether
I
ether