Post on 01-Jul-2020
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 99
10. 3D Clipart and Texturing
Overview Using 3D Clipart and texturing the relief are two very powerful modelling techniques which
can be used together or individually to produce very detailed reliefs.
Lady Example • Select File ���� Close any files you may be working on.
• Click the Load Relief button on the Relief toolbar and select Pend_frm.rlf from the Examples/Overview directory.
Since there is no open model, ArtCAM
opens this Relief as a model and does not
ask whether to Replace or Paste.
• Select the 2D View.
ArtCAM has automatically generated a grayscale
representation of the relief. The bar above the Colour
Palette can be dragged down if it takes up too much room
on the screen.
• Click the Load Relief button on the Relief toolbar.
• Open the file Lady.rlf from the Examples/Overview directory.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
100 Issue ArtCAM-P 5.5
Because there is already a relief open, the Load
Relief dialog box appears:
• Ensure that the Pasting option is selected and click OK.
The 3D Clipart dialog box and a vector outline of the clipart appears in the 2D View.
At the moment the
imported relief, shown
as a vector, is too large,
but it can be
transformed, sized and
positioned, using the
form.
• Resize the relief so that it will fit inside the centre of the pendant, using the corner sizing handles (remember to press and hold Shift while re-sizing in order to maintain the relief’s proportions), or use the Scale page of the 3D Clipart dialog box.
Now we can move the vector (and associated relief) to the centre of the pendant.
• Move the cursor over the line so that the Move Cursor appears.
• Press the Left mouse button and move the mouse to ‘drag’ the relief.
• Release the button when you have moved the vector to the desired place.
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 101
Now you have positioned the clipart you need to adjust its
height and decide how you will combine it with the current
relief.
Look at the top of the Assistant Page – Project Information.
This tells us that the current relief maximum height is
0.659mm.
• Click the Size page on the 3D Clipart dialog box.
This tells us that the clipart has a maximum height of around 2.5mm after scaling.
Although the height has been automatically scaled in proportion to its altered size, it is still
nearly 4 times as high as the pendant base.
• Drag the Scale Z slider bar to bring down the maximum height of the relief to about 0.5mm. Click Apply.
• Click the Mode page on the 3D Clipart dialog box.
We want to Add the clipart relief onto the pendant base which is the default setting.
• Check that the Add mode is selected (this is also indicated at the bottom of the Summary on the left of the dialog box).
• Click the Paste button and then Close button.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
102 Issue ArtCAM-P 5.5
• Generate a Greyscale
The basic relief has been generated. The greyscale is
used to help generate a texture.
ArtCAM allows a 3D texture to be applied across any part of a relief. The textured area is
determined by the areas of Primary colour in a 2D View. This can be done in two ways:
1. Texture with a Pattern - ArtCAM has a number of automatically generated
patterns that you can apply to your reliefs. The Texture with a Pattern option
provides a number of mathematically generated shapes. This makes them fast, high
quality and allows the shape parameters to be easily altered.
2. Texture with a Relief - user defined patterns which you can apply to your reliefs.
Using the From Relief option on the Texture Relief dialog box gives the ability to
create your own textures using any previously generated relief.
The principles involved are very similar for both operations.
In the following example, the pendant that you produced in the clipart section will be textured
using a pre-defined pattern.
• Open the file fin_pend.rlf if the pendant is not already open
• Select red as the Primary colour in the Colour Palette.
• Select the Flood Fill button on the Bitmap toolbar and flood the area around the lady’s head.
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 103
N.B. Because the area around the Lady’s head is one height, it will be one shade of grey, and
therefore can be flood filled as one area of bitmap.
• Select the Texture Relief button on the Relief Editing toolbar.
The Texture Relief dialog appears:
This dialog box allows you to adjust the parameters of
several pre-set texture shapes including Sphere, Ellipse,
Cone, Pyramid and Weave.
There are different Sizing Parameters depending on the
option chosen.
• Select the Pyramid Shape, set the Size to 0.5, the Truncation to 50% the Z Height to 0.1, select Blend Edges and Click Add.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
104 Issue ArtCAM-P 5.5
Paste Relief Along Vector This button on the Relief Toolbar allows several copies of the 3D Clipart to be
pasted along a selected vector.
Example • Open a new model 100 by 100mm using the New Model button on the
File Toolbar.
• Draw a Vector using the Create Polyline button.
This will be the curve that the 3D clipart is pasted along.
• Select the Paste Relief Along Vector button on the Relief Toolbar to open the Crest01.rlf file from the Examples\Crest directory.
The clipart relief appears in the 3D View, the vector
outline appears in the 2D View, and the 3D Clipart dialog
box appears. Use the 3D Clipart dialog box to reduce the
size of the crest to around 15mm.
The Paste Along a Curve page appears in the Assistant:
First select the vector that you are going to paste the clipart
along.
The Spacing setting in the Assistant page allows you to
define the space between adjacent copies of the clipart.
100% means they will be next to each other, less than 100
means they will overlap, and greater than 100 means there
will be a gap.
• Leave Spacing set to 100%.
Next we need to define the sizes of the clipart at the start and end of the curve. By making
the sizes different, ArtCAM will scale the clipart automatically from one size to the other.
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 105
• At the moment the Clipart is too big, so enter a Start Size of 1% and a Final Size of 5%.
• Set this option to Adjust using Scaling.
• Click the Paste button.
ArtCAM calculates the different sizes needed and pastes the clipart. The Relief looks like
this. Black vectors in the 2D View show where the clipart has been pasted:
N.B. There is no preview for this function, so if the result is not what was expected, the
Undo button should be used.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
106 Issue ArtCAM-P 5.5
Motif Example • Use the File menu to Close any projects that you are working on.
• Open a New Model and, set the Height to 25mm and the Width to 50mm.
• Open the relief file Leaves.rlf from the Examples/Clipart directory.
The Load Relief dialog box appears:
• Select Pasting and click OK.
• Select the Rotate page on the 3D Clipart dialog.
• Set the Rotate by angle field to -40 and Click Apply and then Paste.
The red vector rotates to reflect the change.
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 107
A copy of the clipart relief has now been Added to your current relief in the location and
orientation specified. In addition to the red clipart vector, there is now a black vector that
indicates where the relief was pasted. This black vector is no longer associated with the
pasted relief, however the red vector is still attached to a floating clipart relief. In this way
you can paste as many copies of the clipart relief into your current relief as you need.
• Click on the Rotate page and select the Horizontal button.
• Select the Move page and set the Move X origin by field to 25.
• Click Apply and then Paste.
• Generate a Grayscale from Relief.
• Delete both vector shapes.
• Open the relief Flower.rlf from the Examples/Clipart directory.
• Select Pasting and select OK.
• Select the Scale page on the 3D Clipart dialog.
• Set New scale % field to 60%. Click Apply.
• In the 2D View, select and drag the vector outline of the flower between the leaves.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
108 Issue ArtCAM-P 5.5
Before you paste this clipart flower, you can make the flower stand proud of the underlying
leaves by using the vector outline to form a base onto which you can paste the flower clipart.
• Without closing the 3D Clipart dialog, click the Add Colour button on the Bitmap Toolbar.
• Select Green and click OK.
• With the flower vector selected, use the Flood Fill Vectors button on the Vector toolbar to fill the shape with green.
If you look at the Tree Control or the Assistant
Page at the left of the screen, you will see that the
Maximum Z Height of the Relief is 0.500mm.
• Set the green shape to be a flat plane with a Start Height of 0.5mm
• Click the Merge Highest button on the Relief toolbar.
A flat plane in the shape of the flower has now been brought up through the original relief,
and we can paste the clipart flower on top.
ArtCAM Pro 5.5 10. 3D Clipart and Texturing
Issue ArtCAM-P 5.5 109
• Click Paste and then Close on the 3D Clipart dialog box.
• Smooth the Relief with 1 smoothing pass.
The motif relief can be saved. For this example, it is already stored as Motif.rlf.
• Close the model.
10. 3D Clipart and Texturing ArtCAM Pro 5.5
110 Issue ArtCAM-P 5.5
Exercise • Load the relief Plate.rlf from the Examples/Clipart directory
• Paste the relief Motif.rlf from the Examples/Clipart directory three times onto the plate to generate the following effect.