Post on 02-May-2019
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.1
1Contents - Section 1
Norgren - Metric
Norgren - Imperial
Voss - 230
Voss - 232
Raufoss - Metric
Raufoss - Imperial
Raufoss - P5
Raufoss - New Line
Wira
Camozzi
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.2
1Norgren Fleetfit
The Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed toreduce the installation time to a minimum whilst ensuring a secure seal on vehicle air
braking and suspension system.
ApplicationsUsed by many truck manufacturers and in various applications
The FleetFit range have been fitted as original equipment to vehicles throughout theworld since 1982 and now have full TUV approval as well as conforming to the
following Standards:
DOT FMUSSI06 SAE J 1131 DIN74324
Technical Data.
Operating Medium: Compressed Air
Maximum Working Pressure 0 to 10 Bar
Working Temperature -40 C to 100 C.
Tubing DIN 74324 SAEJ844
Tube Connection/Disconnection
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.3
1
Assorted BoxesPart No. 6500A & 6500M
Straight Connector
Tube OD Part No. Pkt No.6mm 6502 PIF3028mm 6504 PIF3049mm 6505 PIF305
10mm 6506 PIF30611mm 6507 PIF30712mm 6508 PIF30814mm 6510 PIF31015mm 6511 PIF31116mm 6512 PIF312
Norgren Fleetfit - For Metric Tube
Tube OD Part NoA B C
8mm 8mm 10mm 652910mm 10mm 6mm 652810mm 10mm 12mm 653112mm 12mm 6mm 653012mm 12mm 8mm 653212mm 12mm 10mm 6524
Unequal Tee Connector
Tube OD ThreadSize Part No Pkt No
10mm M16 x 1.5 6638 PIF43810mm M22 x 1.5 6639 PIF43912mm M16 x 1.5 6644 PIF44412mm M22 x 1.5 6645 PIF445
Branch Stud Tee Adaptor
Tube OD Part No Pkt No6mm 6533 PIF3338mm 6535 PIF335
10mm 6537 PIF33712mm 6539 PIF33915mm 654216mm 6543 PIF343
Elbow Connector
B
A
C
Equal Tee Connector
Tube OD Part No. Pkt No.6mm 6517 PIF3178mm 6519 PIF3199mm 6520
10mm 6521 PIF32111mm 652212mm 6523 PIF32315mm 6526 PIF32616mm 6527 PIF327
Thread Size Part NoM12 x 1.5 6821M16 x 1.5 6822M22 x 1.5 6823
Branch Stud Tee Adaptor
Straight Reducer Connector
Tube OD Tube OD Part No.8mm 6mm 6513
10mm 6mm 651410mm 8mm 651512mm 10mm 6518
Thread Size Part NoM12 x 1.5 6825M16 x 1.5 6826M22 x 1.5 6827
Side Stud Tee Adaptor
Tube OD ThreadSize Part No Pkt No
10mm M22 x 1.5 6813 PIF61312mm M22 x 1.5 6816 PIF616
Bulkhead Stud Coupling
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.4
1Norgren Fleetfit - For Metric Tube
Tube OD Thread Size Part No. Pkt No.6mm M10 x 1 6564 PIF3646mm M12 x 1.5 6565 PIF3656mm M14 x 1.5 6566 PIF3666mm M16 x 1.5 6567 PIF3676mm M22 x 1.5 6568 PIF3688mm M10 x 1 6569 PIF3698mm M12 x 1.5 6570 PIF3708mm M14 x 1.5 6571 PIF3718mm M16 x 1.5 6572 PIF3728mm M22 x 1.5 6573 PIF373
10mm M10 x 1 6576 PIF37610mm M12 x 1.5 6577 PIF37710mm M14 x 1.5 6578 PIF37810mm M16 x 1.5 6579 PIF37910mm M22 x 1.5 6580 PIF38012mm M12 x 1.5 6584 PIF38412mm M14 x 1.5 6585 PIF38512mm M16 x 1.5 6586 PIF38612mm M22 x 1.5 6587 PIF38715mm M22 x 1.5 6594 PIF39416mm M16 x 1.5 6595 PIF39516mm M22 x 1.5 6596 PIF396
Straight Stud
Fast moving selection boxMaxi-stor box (Shown)
Part No. - MSK800Assorted Box Part No. 6600A
Tube OD Thread Size Part No Pkt No6mm M12 x 1.5 6602 PIF4026mm M16 x 1.5 67036mm M22 x 1.5 66098mm M12 x 1.5 6604 PIF4048mm M14 x 1.5 66078mm M16 x 1.5 6605 PIF4058mm M22 x 1.5 6606 PIF406
10mm M10 x 1 660110mm M12 x 1.5 6610 PIF41010mm M14 x 1.5 660810mm M16 x 1.5 6613 PIF41310mm M22 x 1.5 6614 PIF41412mm M16 x 1.5 6619 PIF41912mm M22 x 1.5 6620 PIF42016mm M16 x 1.5 6625 PIF42516mm M22 x 1.5 6626 PIF426
Elbow Stud 90 Deg
Tube OD Thread Size Part No10mm M16 x 1.5 671112mm M16 x 1.5 6650
Elbow Stud 45 Deg
TubeOD
ThreadSize Part No
6mm M16 x 1.5 66038mm M16 x 1.5 6611
Swivel Elbow Stud 90 Deg
Elbow Stud
Tube OD ThreadSize Part No. Pkt No.
6mm 1/8 BSP 6786 PIF5866mm 1/4 BSP 6790 PIF5908mm 1/8 BSP 6787 PIF5878mm 1/4 BSP 6791 PIF5918mm 3/8 BSP 6797 PIF5978mm 1/2 BSP 6803
10mm 1/4 BSP 6792 PIF59210mm 3/8 BSP 6799 PIF59910mm 1/2 BSP 6805 PIF60512mm 1/4 BSP 679412mm 3/8 BSP 6801 PIF60112mm 1/2 BSP 6807
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.5
1Norgren Fleetfit - For Metric Tube
Tube OD Thread Size Part No.6mm 1/8 NPT 6755NPT6mm 1/4 NPT 6759NPT8mm 1/8 NPT 6756NPT8mm 1/4 NPT 6760NPT
10mm 1/4 NPT 6762NPT10mm 3/8 NPT 6764NPT10mm 1/2 NPT 6767NPT12mm 1/4 NPT 6763NPT12mm 3/8 NPT 6766NPT12mm 1/2 NPT 6768NPT16mm 3/8 NPT 6769NPT16mm 1/2 NPT 6765NPT
Straight Stud NPT Thread
Tube OD Thread Size Part No. Pkt No.6mm 1/8 BSP 6755 PIF5556mm 1/4 BSP 6759 PIF5598mm 1/8 BSP 6756 PIF5568mm 1/4 BSP 6760 PIF560
10mm 1/8 BSP 6761 PIF56110mm 1/4 BSP 6762 PIF56210mm 3/8 BSP 6764 PIF56410mm 1/2 BSP 6767 PIF56712mm 1/4 BSP 6763 PIF56312mm 3/8 BSP 6766 PIF56612mm 1/2 BSP 6768 PIF568
Straight Stud
Norgren Fleetfit Fittings - For Imperial Tube
Tube OD Thread Size Part No.6mm 1/8 NPT 6786NPT6mm 1/4 NPT 6790NPT8mm 1/4 NPT 6791NPT8mm 3/8 NPT 6797NPT
10mm 1/4 NPT 6792NPT10mm 3/8 NPT 6799NPT12mm 1/4 NPT 6794NPT12mm 3/8 NPT 6801NPT16mm 3/8 NPT 6809NPT16mm 1/2 NPT 6808NPT
Elbow Stud - NPT Thread
Tube OD Thread Size Part No. Pkt No.1/4 1/8 BSP 6720 PIF5201/4 1/4 BSP 6723 PIF5233/8 1/4 BSP 6726 PIF5263/8 3/8 BSP 6729 PIF5293/8 1/2 BSP 6730 PIF5301/2 1/4 BSP 6727 PIF5271/2 3/8 BSP 67281/2 1/2 BSP 6731 PIF531
Elbow Stud
Straight Bulkhead ConnectorBulkhead Connector
Tube OD Thread Size Part No.3/8 M20 x 1.5 66941/2 M24 x 1.5 6695
Tube OD Thread Size Part No.6mm M15 x 1 65498mm M18 x 1.5 6551
10mm M20 x 1.5 655312mm M24 x 1.5 6555
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.6
1Norgren Fleetfit - For Imperial Tube
TubeOD
ThreadSize Part No. Pkt No.
1/4 1/8 BSP 6701 PIF5011/4 1/4 BSP 6705 PIF5053/8 1/8 BSP 67063/8 1/4 BSP 6707 PIF5073/8 3/8 BSP 6712 PIF5123/8 1/2 BSP 67141/2 1/4 BSP 6708 PIF5081/2 3/8 BSP 6713 PIF5131/2 1/2 BSP 6715
Straight Stud
TubeOD
ThreadSize Part No. Pkt No.
1/4 M10 x 1 67701/4 M12 x 1.5 6771 PIF5711/4 M16 x 1.5 6772 PIF5723/8 M16 x 1.5 6773 PIF5733/8 M22 x 1.5 6774 PIF5741/2 M16 x 1.5 6775 PIF5751/2 M22 x 1.5 6776 PIF5765/8 M22 x 1.5 6778 PIF5785/8 M16 x 1.5 6777
Straight Stud
TubeOD
ThreadSize Part No.
3/16 1/8 NPT 6699NPT3/16 1/4 NPT 6700NPT1/4 1/8 NPT 6701NPT1/4 1/4 NPT 6705NPT3/8 1/4 NPT 6707NPT3/8 3/8 NPT 6712NPT3/8 1/2 NPT 6714NPT1/2 1/4 NPT 6708NPT1/2 3/8 NPT 6713NPT1/2 1/2 NPT 6715NPT5/8 1/2 NPT 6716NPT
Straight Stud NPT
Equal Tee Connector
Tube OD Part No. Pkt No.1/4 66753/8 6677 PIF4771/2 6678 PIF478
TubeOD
ThreadSize Part No.
1/4 1/8 NPT 6720NPT1/4 1/4 NPT 6723NPT3/8 1/4 NPT 6726NPT3/8 3/8 NPT 6729NPT3/8 1/2 NPT 6730NPT1/2 1/4 NPT 6727NPT1/2 3/8 NPT 6728NPT1/2 1/2 NPT 6731NPT5/8 1/2 NPT 6732NPT5/8 3/8 NPT 6733NPT
Elbow Stud NPT
Straight Connector
Tube OD Part No Pkt No1/4 6665 PIF4653/8 6667 PIF4671/2 6668 PIF4685/8 6669 PIF469
Tube OD Part No1/4 66843/8 66861/2 6687
Elbow Connector
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.7
1Voss 230
Tube Size Type Part No8 x 1 NG 8 4772
Straight Connectors
Tube Size ThreadSize Part No
6 x 1 M10 x 1 4778
Assembly Unit
Port Adaptors - Short Thread with O Ring
Thread Size Type Part No Pkt NoM16 x 1.5 NG8 4706 VOS706M22 x 1.5 NG12 4714 VOS714
Port Adaptors - Long Thread no O Ring
Thread Size Type Part No Pkt NoM16 x 1.5 NG12 4712 VOS712
Tube Size Part No6 x 1 4775
Straight Connectors
Tube Size Type Part No12 x 1.5 NG12 4776
Tee Adaptor
Type OD IDNG8 9.4mm 9.4mm
NG12 14.9mm 14.9mm
The 230 system is used with the following tube sizes 6 x 1, 8 x 1, 12 x 1.5 & 16 x 2.
Main Features of IdentificationThis product range splits into two main types, type NG 8 and type NG 12.
To identify the different types measure Diameter B and refer to table below:-
Straight Connector Male Nut
Original equipment fitment on mostMercedes approximately after 1980 andalso to most DAF’s after 1995. Also fittedto MAN 2000 range of vehicles.
Clip Rubber Seal
Air SealDirt Seal Air Seal
B = OD
B = ID
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.8
1
Elbow
Tube Size Type Part No Pkt No6 x 1 NG8 4746 VOS7468 x 1 NG8 4747 VOS7476 x 1 NG12 47488 x 1 NG12 4749 VOS749
12 x 1.5 NG12 4750 VOS75016 x 2 NG12 4751 VOS751
Voss 230
Straight Connector
Tube Size Type Part No Pkt No6 x 1 NG8 47408 x 1 NG8 4741 VOS7416 x 1 NG12 4742 VOS7428 x 1 NG12 4743
12 x 1.5 NG12 4744 VOS744
Tube Size Type Part No12 x 1.5 NG12 4753
Tee Adaptor
Type Part NoNG8 4704
NG12 4705
Spring ElementClip
Type Part No Pkt NoNG8 4700 VOS700
NG12 4701 VOS701
Type Part No Pkt NoNG8 4720 VOS720
NG12 4721 VOS721
Repair Kit
Male Nut
Thread Type Part No Pkt NoM16 x 1.5 NG8 4702 VOS702M22 x 1.5 NG12 4703 VOS703
Part No. 4992
Assembly Tool
The recommended grippingpliers for the quick and easy
assembly of 230 and 232range of fittings into nylon tube
Tube Gear Maxi Stor RangeExclusive to our customers
Part No. MSK470
Contains all popular230 components
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.9
1
Part No. Voss Part No. Can be used to Make
4939 `0233264200
`0233264249`0233314249`5232820249`5232820270`5232820500`5232820570
Part No. Voss Part No. Can be used to Make
4940 `0233304200
`0233304249`0233324249`0233334200`5232820449`5232820470`5232820749
Part No. Voss Part No. Can be used to Make
4942 `0228744271
`5232811000`5232811070
Part No. Voss Part No. Can be used to Make
4943 `0233634270
Voss 230
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.10
1Voss 232
Type Size Part NoNG8 7.5 x 2 4730
NG12 12 x 2 4731
Dirt Seal O Ring
Type Size Part NoNG8 7 x 1.5 4725
NG12 12 x 1.6 4726
Air Seal O Ring
Tube Size Type Part No8 x 1 NG8 4780
Straight Connectors
Size Type Part No12 x 1.5 NG12 4771
Tee Adaptor
Tube Size Type Part No8 x 1 & 6 x 1 NG12 4779
Side Elbow Plug
Type OD IDNG8 9.1mm 9.1mm
NG12 14.6mm 14.6mm
The 232 system is used with the following tube sizes 6 x 1, 8 x 1, 12 x 1.5 & 16 x 2.
Main Features of IdentificationThis product range splits into two main types, type NG 8 and type NG 12.
To identify the different types measure Diameter B and refer to table below:-
Straight Connector Male Nut
Original equipment fitment onmost Mercedes approximatelyafter 1980 and also to mostDAF’s after 1995. Also fitted toMAN 2000 range of vehicles.
Air SealDirt Seal Air SealIntegral Rubber Seal
B = OD
B = ID
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.11
1Voss 232
Straight Connector
Tube Size Type Part No Pkt No6 x 1 NG8 4754 VOS7548 x 1 NG8 4755 VOS7556 x 1 NG12 4756 VOS7568 x 1 NG12 4757 VOS757
12 x 1.5 NG12 4758 VOS758
Male Nut
Thread Size Type Part No Pkt NoM16 x 1.5 NG8 4759 VOS759M22 x 1.5 NG12 4760 VOS760
Elbow
Tube Size Type Part No Pkt No6 x 1 NG8 4761 VOS7618 x 1 NG8 4762 VOS7626 x 1 NG12 4763 VOS7638 x 1 NG12 4764 VOS764
12 x 1.5 NG12 4765 VOS76516 x 2 NG12 4766 VOS766
Straight Connector
Thread Size Type Part No Pkt NoM16 x 1.5 NG8 4768M16 x 1.5 NG12 4769 VOS769M22 x 1.5 NG12 4770 VOS770
Assembly Tool
The recommended grippingpliers for the quick and easy
assembly of 230 and 232 rangeof fittings into nylon tube
Part No. 4992
Tube Gear Maxi Stor RangeExclusive to our customers
Part No. MSK475
Contains all popularVOSS 232 components
These ports adaptors are used to convert standard ported airbrake equipment to be used with 232 range Voss fittings.They are supplied complete ready to accept the maleconnector
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.12
1Raufoss Introduction
The RAUFOSS Fitting Programme is a unique and extremely simple method of ‘piping up’ truckand trailer air brake and air suspension systems
Building BlocksBased on a system of ‘building blocks’ the RAUFOSS programme consists of a limited number ofcomponents which very simply plug together to form a complete range of fittings.
ApplicationThe RAUFOSS Fitting Programme is a unique system providing a complete range of pipe fittings foruse in commercial vehicle Air Brake, Air Suspension and other air controlled systems.
Push-in Technology - very simple, very quick!The programme is based on a special Push-In System. The required fitting is made by plugging thebuilding block components together and then the tubing is connected by simply pushing the tube intothe fitting. And this is all done by hand without the need for special tools.
Complete range of fittings for air systemsPush-In Pipe ConnectorsPlug-In SwivelsBuilding Blocks
Fitted as Original Equipment on:Volvo, Iveco Ford, Scania, Steyr, Sisu, Crane Fruehauf, Dennis Group, Marshall Group, SESR Group
Operating Fluid -Compressed air
Operating Pressure -The maximum operating pressure meets the requirements for both Nylon and Hytrel tubing.
Operating Temperature -Operating temperature of the system is - 40 C to +100 C.Peak temperature allowed is 140 C.All components are manufactured in a special brass alloy for use with NYLON OR HYTREL tubing inaccordance with the followingstandards: DIN 743324-DIN 73378 - NFR 12-632 - ISO 7628 - SAE J844
Please note: The P5 Swivel replaces the old P3 and P4 but is not interchangeable and CANNOT beused with the old fittings or similar fittings from any other manufacturer. The plug-in swivels should notbe used between the axles and the chassis or between the truck and trailer.
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.13
1Raufoss - Metric / Imperial
Tube Size Thread Size Part No Pkt No4 x 1 M12 x 1.5 4501 RA5016 x 1 M10 x 1 4502 RA5026 x 1 M12 x 1.5 4503 RA5036 x 1 M14 x 1.5 4504 RA5046 x 1 M16 x 1.5 4505 RA5056 x 1 M22 x 1.5 4506 RA5068 x 1 M10 x 1 4507 RA5078 x 1 M12 x 1.5 4508 RA5088 x 1 M14 x 1.5 4509 RA5098 x 1 M16 x 1.5 4510 RA5108 x 1 M22 x 1.5 4511 RA511
10 x 1 M10 x 1 4512 RA51210 x 1 M12 x 1.5 4513 RA51310 x 1 M14 x 1.5 4514 RA51410 x 1 M16 x 1.5 4515 RA51510 x 1 M22 x 1.5 4516 RA516
10 x 1.25 M12 x 1.5 4517 RA51710 x 1.25 M14 x 1.5 4518 RA51810 x 1.25 M16 x 1.5 4519 RA51910 x 1.25 M22 x 1.5 4520 RA52010 x 1.5 M10 x 1 4521 RA52110 x 1.5 M12 x 1.5 4522 RA52210 x 1.5 M14 x 1.5 452310 x 1.5 M16 x 1.5 4524 RA52410 x 1.5 M22 x 1.5 4525 RA52512 x 1.5 M10 x 1 4526 RA52612 x 1.5 M12 x 1.5 4527 RA52712 x 1.5 M14 x 1.5 4528 RA52812 x 1.5 M16 x 1.5 4529 RA52912 x 1.5 M22 x 1.5 4530 RA53015 x 1.5 M14 x 1.5 453115 x 1.5 M16 x 1.5 4532 RA53215 x 1.5 M22 x 1.5 4533 RA53315 x 1.5 M26 x 1.5 449316 x 2 M12 x 1.5 4534 RA53416 x 2 M14 x 1.5 4535 RA53516 x 2 M16 x 1.5 4536 RA53616 x 2 M22 x 1.5 4537 RA53718 x 2 M16 x 1.5 4538 RA53818 x 2 M22 x 1.5 4539 RA53918 x 2 M26 x 1.5 4660
10 x 1.5 1/4 NPT 456412 x 1.5 1/4 NPT 4565
Tube Size Thread Size Part No Pkt No1/4 M14 x 1.5 45451/4 M16 x 1.5 45463/8 M16 x 1.5 4553 RA5531/2 M16 x 1.5 4559 RA5595/8 M16 x 1.5 4560
Straight Stud Adaptor - Metric Tube Straight Stud Adaptor - Imperial Tube
Thread Size Part NoM14 x 1.5 4639R
Lock Nut with O Ring
Thread A Thread B Cone Part NoM18 x 1.5 M16 x 1.5 24 Deg 4633R
Straight Adaptor
B
A
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.14
1Raufoss - Metric
TubeSize Part No Pkt No
6 x 1 4566 RA5668 x 1 4567 RA567
10 x 1 4568 RA56810 x 1.25 4569 RA56910 x 1.5 4570 RA57012 x 1.5 4571 RA57115 x 1.5 4572 RA57216 x 2 4649
Straight Connector Straight Bulkhead Adaptor
MaleThread
Size
FemaleThread
SizePart No Pkt No
M18 x 1.5 M16 x 1.5 4613 RA613
Straight Bulkhead Adaptor
MaleThread
Size
FemaleThread
SizePart No Pkt No
M22 x 1.5 M16 x 1.5 4630 RA630
Thread A Thread B Female Thread Part No Pkt NoM22 x 1.5 M22 x 1.5 M16 x 1.5 4499 RA499M16 x 1.5 M22 x 1.5 M16 x 1.5 4631 RA631M22 x 1.5 M16 x 1.5 M10 x 1 4494
Straight Bulkhead Adaptor
Thread Size Part NoM12 x 1.5 4640M16 x 1.5 4641M22 x 1.5 4642
Lock Nut With O Ring
Thread Size Part NoM22 x 1.5 4628
Lock Nut Without O Ring
Thread Size Part NoM16 x 1.5 4637
Cross Adaptor
Thread A Thread B Part NoM12 x 1.5 M12 x 1.5 4629M16 x 1.5 M16 x 1.5 4632
Straight Bulkhead Adaptor
A
B
45 Deg Elbow Adaptor
Female Thread Male Thread Part NoM16 x 1.5 M16 x 1.5 4497M22 x 1.5 M22 x 1.5 4498
A
B
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.15
1Raufoss - Metric
ThreadSize Part No Pkt No
M12 x 1.5 4593 RA593M16 x 1.5 4594 RA594M22 x 1.5 4595 RA595
Equal Tee Adaptor
Thread Size Part NoM16 x 1.5 4643
Branch Stud Tee
Thread Size Part NoM12 x 1.5 4717M16 x 1.5 4715M22 x 1.5 4716
Blanking Plug with O Ring
ThreadSize Part No Pkt No
M16 x 1.5 4596 RA596
Equal Tee AdaptorWith Bracket
Thread Size Part NoM16 x 1.5 4651
Side Stud Tee
Thread Size Part NoM16 x 1.5 4645M22 x 1.5 4646
Female Socket
Thread A Thread B Thread C Part No Pkt NoM16 x 1.5 M16 x 1.5 N/A 4587 RA587M16 x 1.5 M22 x 1.5 M16 x 1.5 4588 RA588M22 x 1.5 M22 x 1.5 M16 x 1.5 4670
90 Deg Elbow Adaptor Male to Female
90 Deg Equal Elbow Adaptor
Thread Size Part No Pkt NoM12 x 1.5 4581 RA581M16 x 1.5 4582 RA582M22 x 1.5 4583 RA583
90 Deg Elbow Adaptor
FemaleThread
Size
MaleThread
SizePart No Pkt No
M12 x 1.5 M12 x 1.5 4584 RA584M16 x 1.5 M16 x 1.5 4585 RA585M16 x 1.5 M22 x 1.5 4586 RA586
B
A
C
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.16
1Raufoss P5
Straight Swivel Adaptor Swivel ThreadSize Part No Pkt No
P5 M10 X 1.0 4615 RA615P5 M12 X 1.5 4616 RA616P5 M14 X 1.5 4617 RA617P5 M16 X 1.5 4618 RA618P5 M22 X 1.5 4619 RA619P5 1/8 NPT 4620 RA620P5 1/4 BSP 4680P5 1/4 NPT 4621 RA621P5 3/8 NPT 4622 RA622P5 1/2 NPT 4623 RA623
Swivel MaleThread
FemaleThread Part No Pkt No
P5 M22 M16 4624 RA624P5 M22 3/8NPT 4625
Straight Swivel Bulkhead Adaptor
Tube OD Thread Part No8mm M12 x 1.5 4638
F Fitting
Thread A Thread B Part NoM16 M16 4634
F Fitting
Straight Swivel Hose Tail
Swivel Hose I.D. Part NoP5 11mm 4626P5 13mm 4627
P5
B
A
Adaptor Thread/Swivel
Swivel ThreadSize Part No Pkt No
P5 M22 x 1.5 4601 RA601
Dodecahedron Swivel Adaptor
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4602 RA602P5 M22 x 1.5 4603
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4578 RA578
Elbow Adaptor 45 Deg Swivel
P5
Swivel ThreadSize Part No Pkt No
P5 M12 x 1.5 4579 RA579P5 M16 x 1.5 4580 RA580
Elbow Adaptor 90 Deg Swivel
P5
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.17
1Raufoss P5
Tee Adapter - Centre Swivel
Swivel ThreadSize Part No Pkt No
P5 M12 x 1.5 4589 RA589P5 M16 x 1.5 4590 RA590
Tee Adapter - Side Swivel
Swivel ThreadSize Part No Pkt No
P5 M12 x 1.5 4591 RA591P5 M16 x 1.5 4592 RA592
P5P5
3 Way Adaptor Swivel
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4597 RA597
4 Way Adaptor Swivel
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4598 RA598
P5P5
4 Way Adaptor Swivel
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4599 RA599P5
Cross Adaptor Swivel
Swivel ThreadSize Part No Pkt No
P5 M16 x 1.5 4600 RA600
P5
Straight Swivel Bulkhead
Swivel ThreadSize Description Part No
P5 M18 x 1.5 K24 Deg -12 Swivel 4653
Swivel Tube Size Part No Pkt NoP5 6 x 1 4573 RA573P5 8 x 1 4574 RA574P5 10 x 1.25 4575 RA575P5 10 x 1.5 4576 RA576P5 12 x 1.5 4577 RA577P5 16 x 2 4496
Swivel Elbow Adaptor
P5
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.18
1
Raufoss New Line Fittings
INSTRUCTION FOR TUBE RELEASE
Push the tube to the bottom of the coupling to move the grip ring out of lockingposition.
Check that the Release Tool is not damaged or blunt. Apply Release Tool on to tube ensuring tight contact between Release Tool and tube
Push the Release Tool to stop with flange at the top of the coupling without usingexcessive force. (Silicone spray can be used to ease the injection of Release Tool).
While pushing the Release Tool towards the coupling pull the tube out (Rotating thetube may ease the release).
Remove the Release Tool
Ensure that the tube end is clean and undamaged. If not cut the tube end Clean the inside of the push-in coupling (tube section), using compressed air, to
remove possible contamination, ensure that no dirt goes inside the port Push in the clean tube
It is recommended that a single push in coupling should be reused a maximum of 5tube assemblies and releases its lifetime
Raufoss - New Line
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.19
1Raufoss - New Line
Assembly of the New Line Building Block System
It is not permitted to mix the Newline Building Block Systems with similar systems produced by othermanufacturers
The Swivel should be mounted with the recommended torque. Remove the protection cap after mounting,directly before assembling Building Block.
The New Line Building Block System is a 2 step connection. The parts are pressed together by hand. Theconnection swivel and building block can be turned for positioning.
When reaching the 1st (safety) position only, a controlled leakage will be discharged, this is slightly audible.Depending on the dimension and accessibility the connection can be re-pressed under pressure and is thensealed.
Important recommendations
In the below cases use the Rotolock in combination with New Line Building Block
· Connection between truck and trailer (e.g. brake hose/Air coils)· Between axle and chassis (e.g. brake hose)· The orientation has to be fixed
Assembly of Rotolock
1/ Press Rotlock + Newline Building Block together2/ Plug this assembly on top of the swivel (1st safety position).3/ Define the orientation.4/ Click the New Line Building Block into the 2nd/locked position.
Release of Raufoss New Line Building Block
To release the New Line Building Block us the circlip pliers (Part No 6921).Insert the pliers into the snap arms and expand the pliers.Pull out the coupling from the union.The Building Block is free the union.The parts are reusable as long as no visible damage appears.
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.20
1
Raufoss New Line System
A new generation of couplings, based on composite materials in combination with leadingcoupling technology
The system will provide significant improvement in key coupling areas, and enableRaufoss to take broader responsibility in pneumatic system building on commercial vehicles
New composite materials reduce system cost, weight, article numbers and increasesdesign flexibility.
Brass components secure structuralintegrity in highly stressed areas.
One global system, fulfilling differentengineering philosophieswithin truck, bus, trailer,off-road applications
Port Sizes
Type Tube OD
Small 6 x 1 / 8 x 1mmMedium 6 x 1 - 12 x 1.5mmLarge 12 x 1.5 / 15 x 1.5 / 16 x 2mm
System Release PliersPart No. 6921
TubeSize Part No. Pack
Part No.6mm 4662 RA7628mm 4663 RA763
10mm 4664 RA76412mm 4665 RA76515mm 4666 RA76616mm 4667 RA767
Tube Release Tool
Tube Size Part No.6mm R990602008mm R99080200
10mm R9910020012mm R9912020015mm R9915020016mm R99160200
Professional Tube Release Tool
Type SpannerSize Part No. Pack
Part No.Small 22mm R64012200
Medium 22mm R64022200 RA795Medium 28mm R64022800 RA796
Rotolock
Raufoss - New Line
Assorted Box Part No. MSK802
Part No. Qty Part No. QtyR52000000 2 R10022200 3R60020000 1 R02020600 2R03020600 2 R02020800 2R03020800 2 R02021002 2R03021002 2 R02021200 2R03021200 2 4662 1R32000000 2 4663 1R10021200 3 4664 1R10021400 2 4665 1R10021600 3 6921 1
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.21
1
Type FemaleThread Male Thread Pack
Part No.Medium M16 x 1.5 M22 x 1.5 R14021622
Type Male Thread Part No.Medium M18 x 1.5 R15020018
Bulk Head Coupling - Swivel
Bulk Head Coupling - Swivel
Male Stud Couplings
Thread Tube Part No. PackPart No.
M12 x 1.5 6 x 1 R01061200 RA700M12 x 1.5 8 x 1 R01081200 RA706M12 x 1.5 10 x 1.25 R01101202 RA710M16 x 1.5 10 x 1.25 R01101602 RA712M16 x 1.5 12 x 1.5 R01121600 RA716M22 x 1.5 15 x 1.5 R01152200 RA720M22 x 1.5 16 x 2 R01162200 RA722
Thread Tube Part No. PackPart No.
M16 x 1.5 6 x 1 R01061600 RA702M22 x 1.5 6 x 1 R01062200 RA704M16 x 1.5 8 x 1 R01081600 RA708M22 x 1.5 8 x 1 R01082200 RA709M22 x 1.5 10 x 1.25 R01102202 RA714M22 x 1.5 12 x 1.5 R01122200 RA718
Male Stud Couplings
Type Tube Part No. PackPart No.
Medium Medium R65020200 RA756Medium Large R65020300
Threadless Adaptor
Type ThreadSize Part No. Pack
Part No.Small M12 x 1.5 R10011200Small M16 x 1.5 R10011600
Medium M10 x 1 R10021000 RA772Medium M12 x 1.5 R10021200 RA773Medium M14 x 1.5 R10021400 RA774Medium M16 x 1.5 R10021600 RA775Medium M22 x 1.5 R10022200 RA777Large M22 x 1.5 R10032200
Male Swivel Stud
Type Thread A Thread B PackPart No.
Medium M16 x 1.5 M22 x 1.5 R17021622Medium M22 x 1.5 M22 x 1.5 R17022222
Bulk Head Coupling - Swivel
Raufoss - New Line
B
A
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.22
1
Type Single Part No.Medium R92000000
Type Part No. PackPart No.
Medium R22000000 RA752
45 Degree Elbow Four Way Coupling
Integral 90 Degree Elbow
Type Single Part No.Medium R72000000
Three Way Coupling
Type Part No. PackPart No.
Medium R32000000 RA750
90 Degree Elbow
Type Tube Part No. PackPart No.
Medium 6 x 1 R02020600 RA731Small 8 x 1 R02010800
Medium 8 x 1 R02020800 RA733Medium 10 x 1.25 R02021002 RA734Medium 12 x 1.5 R02021200 RA735Large 15 x 1.5 R02031500
Threadless Coupling
Type Single Part No.Medium R82000000
Type Part No.Medium R62000000
Y Type CouplingCross Type Coupling
Type Part No. PackPart No.
Small R51000000Medium R52000000 RA754
T Type Coupling
Threadless Test Point
Type Part No. PackPart No.
Medium R60020000 RA760
Type Single Part No.Medium R42000000
F Type Coupling
Type Tube Part No. PackPart No.
Small 6 x 1 R03010600Medium 6 x 1 R03020600 RA741Small 8 x 1 R03010800
Medium 8 x 1 R03020800 RA743Medium 10 x 1.25 R03021002 RA744Medium 12 x 1.5 R03021200 RA745Large 15 x 1.5 R03031500Large 16 x 2 R03031600
Raufoss - New Line
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.23
1WIRA
The WIRA push-in fitting is designed to be quick and easy to use, extremelyversatile and totally secure. After undergoing strenuous tests, it is one of onlya few push-in fittings to have gained the German TUV approval for vehiclebraking systems.
EASE OF USESupplied by Tube Gear Ltd as complete assemblies, it considerably reduceslabour costs by eliminating the need to build an elbow or tee-type connector aswell as the time saved in just pushing the tube into the fitting. It can also bedisconnected if required.
VERSATILITYThe availability of fifteen metric tube sizes from 6mm to 18mm and the fitting’scompatibility with DIN standard W3861 compression form gives endlessoptions of application.
SECURITYWith the tandem seal on the atmosphere side of the tube grip, it ensures thatany score marks made during tube fitment cannot affect the seal capabilities.It also prevents any dirt getting into the fitting, thus prolonging its life. The tubegrip has two ribs which, because of their depth limitation, cannot cut throughthe nylon tube but do provide total security of tube retention. Whilst the fittingcannot be released either accidentally or by vandals, it can be undone andre-connected very easily.
Push In Compression
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.24
1WIRA
ASSEMBLY INSTRUCTIONS FOR PUSH-IN FITTINGS
Connecting the push-in fitting to the main bodyThe push-in fitting seals onto the body by way of an o-ring and should not be over tightenedas this could damage the o-ring. The taper on the tube support acts only as a guide into thebody and has no effect on the seal
Connecting the tube to the push-in fittingAs the WIRA push-in fitting has an integral tube support it is essential to ensure that theinside and outside diameters of the nylon tube match those of the fitting.Mark the depth of insertion of the tube with a suitable marker. This can be done by usingthe insertion table, as shown, or by placing the end of the tube against the back of thehexagon and marking the tube at the end of the fitting.
Cut the tube squarely ensuring there are no burrs on the inside or outside. Insert the tubeinto the connector until it comes to a stop against the main body of the coupling. The markon the tube should be parallel with the end of the connection. Pull the tube to ensureit is locked in.
Disconnecting the push-in end fittingUnscrew the end fitting from the body with the correct size spanner.This does not damage either the tube or the components of the end fitting.
Dismantling the push-in fittingUsing the special needle (supplied free of charge) remove the o-ring at the base of thethread. Slide the nut back and remove the tube support. Cut the tube directly behind thetube grip so the grip can be pushed backwards off the tube.
Assembling the push-in fittingAfter checking that none of the components are damaged, drop the tube grip into the nutwith the taper facing the back of the nut. Place the tube support into the nut and replacethe o-ring using the smooth edge of the special needle.A puncture of the o-ring will not cause a sealing problem.
Tube OD Torque Tube OD Torque Tube OD Torque6 mm 14 nm/10 lbsft 10 mm 22 nm/16 lbsft 15 mm 36 nm/26 lbsft8 mm 17 nm/12 lbsft 11 mm 30 nm/22 lbsft 16 mm 40 nm/29 lbsft9 mm 22 nm/16 lbsft 12 mm 30 nm/22 lbsft 18 mm 48 nm/35 lbsft
Tube OD Insertion Tube OD Insertion Tube OD Insertion6 mm 18.0mm 10 mm 19.5mm 15 mm 20.5mm8 mm 18.0mm 11 mm 19.5mm 16 mm 20.5mm9 mm 19.5mm 12 mm 20.5mm 18 mm 22.5mm
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.25
1WIRA
All the metric threads are parallel and need a seal when screwed into a port.The most popular seal being the combination of thrust & o-ring. Also, thethread in the tube nut is always directly related to the outside diameter of thetube enabling combination fittings to be made. eg. 10mm tube uses M16 x 1.5thread in the tube nut.
Components / Materials
1. Body according to DIN W 3861 / Steel
2. Nut / Brass
3. Integral Tube Support / Brass
4. O-Ring / Special material
5. Tube Grip / Brass
6. Tandem O-Ring / Special material
7. Lock Nut / Steel
8. Thrust and O-Ring / Brass and Perbunan
Tube OD Thread6mm M12 x 1.58mm M14 x 1.59mm M16 x 1.5
10mm M16 x 1.512mm M18 x 1.515mm M22 x 1.516mm M22 x 1.518mm M26 x 1.5
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.26
1WIRA
Straight Stud Adaptor - Metric
Tube Size Thread Size Part No6 x 1mm M10 x 1 70416 x 1mm M12 x 1 70426 x 1mm M14 x 1.5 70436 x 1mm M16 x 1.5 70446 x 1mm M22 x 1.5 70458 x 1mm 1/4 NPT 70468 x 1mm M10 x 1 7047
9 x 1.5mm M12 x 1.5 70529 x 1.5mm M16 x 1.5 70539 x 1.5mm M22 x 1.5 70549 x 1.5mm 1/8 BSP 707210 x 1mm M16 x 1.5 7059.110 x 1mm M22 x 1.5 7062.1
10 x 1.25mm 1/4 NPT 705510 x 1.25mm M10 x 1 705610 x 1.25mm M12 x 1.5 705710 x 1.25mm M14 x 1.5 705810 x 1.25mm M16 x 1.5 705910 x 1.25mm M18 x 1.5 706010 x 1.25mm M22 x 1.5 706210 x 1.5mm M14 x 1.5 7058.510 x 1.5mm M16 x 1.5 7059.510 x 1.5mm M22 x 1.5 7062.511 x 1.5mm M16 x 1.5 706412 x 1.5mm M12 x 1.5 706712 x 1.5mm M14 x 1.5 706812 x 1.5mm M16 x 1.5 706912 x 1.5mm M18 x 1.5 707012 x 1.5mm M22 x 1.5 707115 x 1.5mm 1/2 NPT 707515 x 1.5mm M16 x 1.5 707615 x 1.5mm M22 x 1.5 707715 x 1.5mm M26 x 1.5 757715 x 2mm M16 x 1.5 7076.215 x 2mm M22 x 1.5 7077.216 x 2mm M22 x 1.5 7078
Straight Stud Adaptor - Metric
Tube Size Thread Size Part No8 x 1mm M12 x 1.5 70488 x 1mm M14 x 1.5 7049
Straight Stud Adaptor - Metric
Tube Size Thread Size Part No8 x 1mm M16 x 1.5 70508 x 1mm M22 x 1.5 7051
Tube Size Thread Size Part No10 x 1.25mm M12 x 1.5 805710 x 1.25mm M16 x 1.5 805912 x 1.5mm M16 x 1.5 8069
Brass Straight Stud Adaptor - Metric
Tube Size Thread Size Part No8 x 1mm M12 x 1.5 80488 x 1mm M14 x 1.5 8049
Brass Straight Stud Adaptor - Metric Brass Straight Stud Adaptor - Metric
Tube Size Thread Size Part No8 x 1mm M16 x 1.5 80508 x 1mm M22 x 1.5 8051
10 x 1.25mm M22 x 1.5 806212 x 1.5mm M22 x 1.5 8071
Brass Straight Stud Adaptor - Metric
Tube Size Thread Size Part No15 x 1.5mm M22 x 1.5 807718 x 2mm M22 x 1.5 8079
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.27
1
Tube Size Thread Size Part No.* 6 x 1mm M12 x 1.5 7030* 8 x 1mm M14 x 1.5 7031* 8 x 1mm M18 x 1.5 70288 x 1.5mm M14 x 1.5 7031.59 x 1.5mm M16 x 1.5 703210 x 1mm M16 x 1.5 7033.1
* 10 x 1.25mm M16 x 1.5 7033* 10 x 1.25mm M18 x 1.5 7029
10 x 1.5mm M16 x 1.5 7033.5* 11 x 1.5mm M18 x 1.5 7034* 12 x 1.5mm M18 x 1.5 7035* 15 x 1.5mm M22 x 1.5 7037
15 x 2mm M22 x 1.5 7037.2* 16 x 2mm M22 x 1.5 7038* 18 x 2mm M26 x 1.5 7039
Tube Size Stem OD Thread Size Part No6 x 1mm 8mm M14 x 1.5 73256 x 1mm 10mm M16 x 1.5 73268 x 1mm 10mm M16 x 1.5 73278 x 1mm 12mm M18 x 1.5 7329
10 x 1.25mm 12mm M18 x 1.5 7331
Straight Stem Reducer
WIRA
Tube Size Thread Size Part No6 x 1mm M12 x 1.5 71438 x 1mm M14 x 1.5 7144
10 x 1.25mm M16 x 1.5 714612 x 1.5mm M18 x 1.5 7148
Straight Bulkhead Connector
Tube Size Thread Size Part No8 x 1mm M14 x 1.5 7144TP
Straight Bulkhead Connector
Thread Size Part NoM12 x 1.5 7993M16 x 1.5 7995
1/4 79961/8 7997
Exhaust Silencer
Push In End Fitting
Assorted Box Part No. 7030A* Denotes Standard Tube Sizes
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.28
1WIRA
Tube Size ThreadSize Part No
8 x 1mm M22 x 1.5 713210 x 1mm M22 x 1.5 7136.1
10 x 1.25mm M16 x 1.5 713510 x 1.25mm M18 x 1.5 745510 x 1.25mm M22 x 1.5 713612 x 1.5mm M16 x 1.5 713812 x 1.5mm M22 x 1.5 7139
Straight Bulkhead Connector
Tube Size ThreadSize Part No
10 x 1.25mm M22 x 1.5 7131
Straight Bulkhead Connector
Tube Size ThreadSize Part No
8 x 1mm M22 x 1.5 708210 x 1.25mm M22 x 1.5 708612 x 1.5mm M22 x 1.5 7090
Straight Female Stud
Tube Size ThreadSize Part No
12 x 1.5mm M18 x 1.5 7148SE
Straight Bulkhead Connector
Tube Size Part No.6 x 1mm 71108 x 1mm 7112
9 x 1.5mm 711310 x 1mm 7114.1
10 x 1.25mm 711410 x 1.5mm 7114.511 x 1.5mm 711512 x 1.5mm 711615 x 1.5mm 711715 x 2mm 7117.216 x 2mm 711818 x 2mm 7119
Straight Connector
Thread A Thread B Part NoM16 x 1.5 M18 x 1.5 7981T
45 Deg Elbow
Tube Size Tube Size Part No.8 x 1mm 6 x 1mm 7120
10 x 1.25mm 6 x 1mm 712110 x 1.25mm 8 x 1mm 712212 x 1.5mm 6 x 1mm 712312 x 1.5mm 8 x 1mm 712412 x 1.5mm 10 x 1.25mm 7125
Straight Un-equal Connector
AB
45 Deg Elbow
Tube Size Thread Size Part No10 x 1.25mm M16 x 1.5 717412 x 1.5mm M16 x 1.5 7264
Tube Size Thread Size Part No12 x 1.5mm M18 x 1.5 7339
45 Deg Elbow
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.29
1WIRA
Tube Size Thread Size Part No Brass Part No6 x 1mm M10 x 1 71556 x 1mm M12 x 1.5 71566 x 1mm M14 x 1.5 71576 x 1mm M16 x 1.5 71586 x 1mm M22 x 1.5 71598 x 1mm M12 x 1.5 7160 8160B8 x 1mm M14 x 1.5 71618 x 1mm M16 x 1.5 71628 x 1mm M22 x 1.5 7163 8163B
9 x 1.5mm M12 x 1.5 71649 x 1.5mm M16 x 1.5 71659 x 1.5mm 1/8 NPT 745310 x 1mm M16 x 1.5 7170.1
10 x 1.25mm 1/4 NPT 716710 x 1.25mm M12 x 1.5 716810 x 1.25mm M14 x 1.5 716910 x 1.25mm M16 x 1.5 717010 x 1.25mm M22 x 1.5 717110 x 1.5mm M12 x 1.5 7168.510 x 1.5mm M16 x 1.5 7170.511 x 1.5mm M16 x 1.5 717211 x 1.5mm M22 x 1.5 717312 x 1.5mm M16 x 1.5 717512 x 1.5mm M22 x 1.5 7176 8176B15 x 1.5mm M16 x 1.5 717715 x 1.5mm M22 x 1.5 717815 x 2mm M16 x 1.5 7177.215 x 2mm M22 x 1.5 7178.216 x 2mm M22 x 1.5 717918 x 2mm M22 x 1.5 7180 8180
Elbow Stud 90 Deg
Tube Size Thread Size Part No.8 x 1mm M14 x 1.5 7182
10 x 1.25mm M16 x 1.5 718412 x 1.5mm M18 x 1.5 7186
Equal Bulkhead Elbow 90 Deg
Tube Size Thread Size Part No.8 x 1mm M14 x 1.5 7152
10 x 1.25mm M16 x 1.5 715310 x 1.5mm M16 x 1.5 7153.512 x 1.5mm M18 x 1.5 7187
Bulkhead Elbow 90 Deg
Tube Size Stem OD Thread Size Part No.6 x 1mm 6mm M12 x 1.5 73408 x 1mm 6mm M12 x 1.5 73428 x 1mm 8mm M14 x 1.5 7341
10 x 1.25mm 10mm M16 x 1.5 734312 x 1.5mm 12mm M18 x 1.5 734515 x 1.5mm 15mm M22 x 1.5 734718 x 2mm 18mm M26 x 1.5 7349
Elbow Adaptor 90 Deg
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.30
1WIRA
Tube Size Thread Size Part No. Brass Part No.6 x 1mm M12 x 1.5 72106 x 1mm M16 x 1.5 72118 x 1mm M12 x 1.5 7213 8213B8 x 1mm M16 x 1.5 7214 8214B8 x 1mm M22 x 1.5 7215 8215B
10 x 1.25mm M12 x 1.5 721810 x 1.25mm M16 x 1.5 722010 x 1.25mm M22 x 1.5 722112 x 1.5mm M16 x 1.5 722412 x 1.5mm M22 x 1.5 722515 x 1.5mm M22 x 1.5 7226
Branch Stud Tee - Equal
Tube Size Part No.10 x 1.25mm 7194
Elbow Connector
Tube Size Thread Size Part No.6 x 1mm M12 x 1.5 72338 x 1mm M16 x 1.5 7239
10 x 1.25mm M12 x 1.5 724410 x 1.25mm M14 x 1.5 729110 x 1.25mm M16 x 1.5 724510 x 1.25mm M22 x 1.5 724612 x 1.5mm M16 x 1.5 724912 x 1.5mm M22 x 1.5 7250
Side Stud Tee
Tube Size Thread Size Part No.10 x 1.25mm M16 x 1.5 7263
Side Stud TeeTube Size Thread Size Part No.
10 x 1.25mm M16 x 1.5 726815 x 1.5mm M22 x 1.5 7271
Bulkhead Tee Connector
Side Stud Tee
Tube Size Thread Size Hose ID Part No.10 x 1.25mm M16 x 1.5 13mm 7426
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.31
1WIRA
Tube A Size Tube B Size Thread Size Part No.8 x 1mm 6 x 1mm M12 x 1.5 7252
12 x 1.5mm 6 x 1mm M16 x 1.5 725612 x 1.5mm 6 x 1mm M22 x 1.5 725712 x 1.5mm 8 x 1mm M16 x 1.5 725812 x 1.5mm 8 x 1mm M22 x 1.5 7259
Un-Equal Side Stud Tee
Tube Size Stem OD Thread Size Part No.8 x 1mm 8mm M14 x 1.5 7351
10 x 1.25mm 10mm M16 x 1.5 735312 x 1.5mm 12mm M18 x 1.5 7355
Side Stem Tee
Branch Stem Tee Connector
Tube Size Stem OD Thread Size Part No.10 x 1.25mm 10mm M16 x 1.5 7439
Side Stem Tee
Tube Size Part No.6 x 1mm 72758 x 1mm 7276
10 x 1mm 7278.110 x 1.25mm 727812 x 1.5mm 728015 x 1.5mm 728116 x 2mm 728218 x 2mm 7283
Tee Connector
AB
Tube Size Stem OD Thread Size Part No.8 x 1mm 8mm M14 x 1.5 7366
10 x 1.25mm 10mm M16 x 1.5 736812 x 1.5mm 12mm M18 x 1.5 7370
Tube Size Thread Size Part No10 x 1.25mm M12 x 1.5 737610 x 1.25mm M22 x 1.5 7427
Stud Cross
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.32
1WIRA
Tube A Size Tube B Size Tube C Size Part No.9 x 1.5mm 8 x 1mm 9 x 1.5mm 7284
10 x 1.25mm 6 x 1mm 10 x 1.25mm 728510 x 1.25mm 8 x 1mm 10 x 1.25mm 728612 x 1.5mm 8 x 1mm 12 x 1.5mm 728712 x 1.5mm 10 x 1.25mm 12 x 1.5mm 7288
Un-Equal Tee Connector
Tube Size Stem OD Thread Size Part No10 x 1.25mm 10mm M16 x 1.5 7375
Stem Tee Adaptor
Tube Size Thread Size Part No6 x 1mm M12 x 1.5 7441
Test Point Bulkhead
A
BC
Tube Size Thread Size Part No BrassPart No
8 x 1mm M12 x 1.5 73798 x 1mm M16 x 1.5 73808 x 1mm M22 x 1.5 7381 8381B
10 x 1.25mm M12 x 1.5 738210 x 1.25mm M16 x 1.5 738310 x 1.25mm M22 x 1.5 738412 x 1.5mm M16 x 1.5 738512 x 1.5mm M22 x 1.5 7386
Side Stud Tee Test Point
Tube Size Part No8 x 1mm 7420
10 x 1.25mm 742212 x 1.5mm 7424
Tee Test Point
Tube Size Thread Size Part No8 x 1mm M16 x 1.5 7387
10 x 1.25mm M16 x 1.5 739012 x 1.5mm M16 x 1.5 739212 x 1.5mm M22 x 1.5 7393
Side Stud Tee Test Point
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.33
1WIRA
Tube Size Thread Size Part No10 x 1.25mm M12 x 1.5 737810 x 1.25mm M16 x 1.5 739610 x 1.25mm M22 x 1.5 739712 x 1.5mm M16 x 1.5 744512 x 1.5mm M22 x 1.5 7398
Branch Stud Tee Test Point
Thread Size Part No Part No with T&OM22 x 1.5 7887G 7887T
Male Tee
Hose ID ThreadSize Part No Part No
with T&O Pkt No.
13 mm M22 x 1.5 7828G 7828T MAB155
Hose Tail Tee
Straight Bulkhead Adaptor
B
A
Thread A Thread B Part No C/W T&O Pkt No.M16 x 1.5 M16 x 1.5 7896G 7896TM16 x 1.5 M22 x 1.5 7928G 7928TM16 x 1.5 M10 x 1 7956GM22 x 1.5 M12 x 1.5 7961 7961TM22 x 1.5 M14 x 1.5 7740G 7740TM22 x 1.5 M16 x 1.5 7741G 7741TM22 x 1.5 M18 x 1.5 7760GM22 x 1.5 M22 x 1.5 7742G 7742T MAB0781/2 BSP M22 x 1.5 7755G MAB082
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.34
1WIRA
For a full range of Metric & Imperial Nylon Tubing see section six
All Tube Gear Metric Nylon is manufactured and printed to DIN 73378 exceptblack tube which complies to the Air Brake Standard DIN 74324.
It is also printed with depth marks for use with WIRA Push-In Fittings and issuitable for use with Air, Water, Petrol, Diesel and many other chemicals.
Thread Size Part No C/W T&OM22 x 1.5 7850G 7850T
Bulkhead Elbow
Short Thread Size Long Thread Size Part NoM22 x 1.5 M22 x 1.5 8742B
Bulkhead Connector
Internal M16 x 1.5 F/M
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com1.35
1CAMOZZI
Tube OD ThreadSize Part No PKT No
6 x 1mm M10 x 1 CC3406106 x 1mm M12 x 1.5 CC340612 CAM4026 x 1mm M16 x 1.5 CC340616 CAM4038 x 1mm M12 x 1.5 CC340812 CAM4048 x 1mm M14 x 1.5 CC340814 CAM4078 x 1mm M16 x 1.5 CC340816 CAM4058 x 1mm M22 x 1.5 CC340822 CAM406
10 x 1mm M12 x 1.5 CC341012 CAM41010 x 1mm M16 x 1.5 CC341016 CAM41310 x 1mm M22 x 1.5 CC341022 CAM414
12 x 1.5mm M12 x 1.5 CC34121212 x 1.5mm M16 x 1.5 CC341216 CAM41912 x 1.5mm M22 x 1.5 CC341222 CAM42015 x 1.5mm M22 x 1.5 CC34152216 x 2mm M22 x 1.5 CC34162218 x 2mm M22 x 1.5 CC341822
Male Stud 90 Deg Elbow
Tube OD ThreadSize Part No PKT No
6 x 1mm M10 x 1 CC130610 CAM3646 x 1mm M12 x 1.5 CC130612 CAM3656 x 1mm M16 x 1.5 CC130616 CAM3668 x 1mm M12 x 1.5 CC130812 CAM3708 x 1mm M16 x 1.5 CC130816 CAM3728 x 1mm M22 x 1.5 CC130822 CAM373
10 x 1mm M12 x 1.5 CC131012 CAM37710 x 1mm M16 x 1.5 CC131016 CAM37910 x 1mm M22 x 1.5 CC131022 CAM380
12 x 1.5mm M12 x 1.5 CC131212 CAM38412 x 1.5mm M14 x 1.5 CC131214 CAM38512 x 1.5mm M16 x 1.5 CC131216 CAM38612 x 1.5mm M22 x 1.5 CC131222 CAM38715 x 1.5mm M16 x 1.5 CC13151615 x 1.5mm M22 x 1.5 CC131522 CAM39416 x 2mm M22 x 1.5 CC131622 CAM396
15 x 1.5mm M22 x 1.5 CC131522 CAM394
Male Stud
Camozzi Fittings
Camozzi series C-Truck push-in fittings have been designed for use in the braking system on the commercial vehicles andare certified to TUV standards. Tubes can be connected and disconnected quickly, without having to remove the fitting fromthe vehicle, All fittings are supplied pre-assembled and are therefore ready to use. The body, tube insert, collet and lockingnut are made from brass and are therefore highly resistant to corrosion. A protective cover, made from a special rubberwhich is resistant to oils and petrol, keeps humidity and dirt away from the collet.
Each fitting can be used in extreme temperatures (-50 to +100C) and even when there are extreme changes in temperaturea secure tube connection is maintained due to the insert which is designed to keep the dimensions of the tube constant. Aself sealing O-ring, also resistant to oils and petrol, is situated in a special groove in the thread, ensuring there in no damageduring assembly, The working pressure is in accordance with the nylon tube used, with a maximum valve of 16 bar. C-Truckfittings, and the connecting tubes, are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006,DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-98
Materials Brass body, collet, locking nut and insert: zinc plated steel locking nut, technopolymer insertNBR O-ring seal on threads
Thread MetricWorking Pressure 0 to 16 barMaximum Pressure According to the nylon tube specificationTube Nylon (polyamide) (D/d) 4x1, 6x1, 8x1, 10x1, 12x1.5, 15x1.5, 16x2, and 18x2Fluid Compressed AirTemperature -50 to + 100C (see tube specification)
Push in Air Brake
Tel: 01474 321954 / Fax: 01474 321988 / e-mail: orders@tube-gear.com 1.36
1CAMOZZI
Release Tool
Tube OD Part No PKT No6mm CC7406 CAM74068mm CC7408 CAM7408
10mm CC7410 CAM741012mm CC7412 CAM741215mm CC7415 CAM741516mm CC7416 CAM7416
Straight Coupling
Tube OD Part No PKT No6 x 1mm CC1006 CAM3028 x 1mm CC1008 CAM304
10 x 1mm CC1010 CAM30612 x 1.5mm CC1012 CAM308
Branch Stud Tee
Tube OD Thread Size Part No6 x 1mm M10 x 1 CC220606106 x 1mm M12 x 1.5 CC220606126 x 1mm M16 x 1.5 CC220606168 x 1mm M12 x 1.5 CC220808128 x 1mm M16 x 1.5 CC220808168 x 1mm M22 x 1.5 CC22080822
Equal Tee Connector
Tube OD Part No PKT No6 x 1mm CC2006 CAM3178 x 1mm CC2008 CAM319
10 x 1mm CC2010 CAM32112 x 1.5mm CC2012 CAM323
Elbow Connector
Tube OD Part No PKT No6 x 1mm CC3006 CAM3338 x 1mm CC3008 CAM335
10 x 1mm CC3010 CAM33712 x 1.5mm CC3012 CAM339
Stud Run Tee
Tube OD Thread Size Part No6 x 1mm M10 x 1 CC231006066 x 1mm M12 x 1.5 CC231206068 x 1mm M12 x 1.5 CC231208088 x 1mm M16 x 1.5 CC23160808
10 x 1mm M16 x 1.5 CC2316101012 x 1.5mm M12 x 1.5 CC2312121212 x 1.5mm M16 x 1.5 CC2316121215 x 1.5mm M16 x 1.5 CC23161515