Post on 06-Feb-2018
Page 1
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Page 2
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Needle Valve
1 TEE BAR AISI 304 (optional 316L)
2 FIXING AISI 303 (optional 316L)
3 CAP HYTREL
4 GLAND NUT AISI 316L
5 LOCK NUT AISI 316L
6 BONNET AISI 316L
7 RING AISI 316L
8 METAL SEAL AISI 316L
9 PACKING (STEM) PTFE / GRAPHOIL
10 STEM AISI 316L
11 PIN AISI 304 (optional 316L)
BILL OF MATERIALSBILL OF MATERIALSBILL OF MATERIALSBILL OF MATERIALS
12 NON-ROTATING STEM AISI 316L
NonNonNonNon----rotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent the galling of the valve seat in contact with the non-rotating stem, which is driven straight into it without rotating. • Tee bar easy manoeuvrability with minimum
effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard,
optional: carbon steel LF2, Duplex, Super Duplex, Monel 400, Hastelloy C276, Inconel 625, Titanium, Incolloy 825
• Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the
operating thread
2222
3333
4444
5555
6666
7777
8888
9999
1111
11111111
10101010
12121212
Page 3
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Needle Valve
Anti-Tamper
Anti-Tamper Locking
Locking Devices and AntiLocking Devices and AntiLocking Devices and AntiLocking Devices and Anti----TamperTamperTamperTamper A wide range of locking devices is available on our products
The Anti-Tamper handle reduces the risk of human error and deliberate tampering. The valve can be operated with the Anti-Tamper key, provided separately.
Lockable Anti-Tamper The Anti-Tamper accommodates shackles of diameter 0.25 ( 6 .4 mm ) or smaller and can be locked.
**** PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.
****
Page 4
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Stem Packing MaterialStem Packing MaterialStem Packing MaterialStem Packing Material Valve MaterialValve MaterialValve MaterialValve Material Temperature rating Temperature rating Temperature rating Temperature rating
( °C )( °C )( °C )( °C ) ( °F )( °F )( °F )( °F ) psipsipsipsi barbarbarbar
Standard PTFEStandard PTFEStandard PTFEStandard PTFE SS 316L -73°C / +200°C -99°F / +392°F 6.000 413
Standard PEEKStandard PEEKStandard PEEKStandard PEEK SS 316L -40°C / +260°C -40°F / +500°F 6.000 413
Standard GraphoilStandard GraphoilStandard GraphoilStandard Graphoil SS 316L -54°C / +510° -65°F / +950°F 6.000 413
Note: Pressure information at the maximum temperature is based on ASME B16 standard.Note: Pressure information at the maximum temperature is based on ASME B16 standard.Note: Pressure information at the maximum temperature is based on ASME B16 standard.Note: Pressure information at the maximum temperature is based on ASME B16 standard.
Maximum Standard PressureMaximum Standard PressureMaximum Standard PressureMaximum Standard Pressure
Material groups, Class Ratings, and Temperatures are based on ASME codes. The choice of optional packing materials may affectMaterial groups, Class Ratings, and Temperatures are based on ASME codes. The choice of optional packing materials may affectMaterial groups, Class Ratings, and Temperatures are based on ASME codes. The choice of optional packing materials may affectMaterial groups, Class Ratings, and Temperatures are based on ASME codes. The choice of optional packing materials may affect ththththe e e e valve rating.valve rating.valve rating.valve rating.
FeaturesFeaturesFeaturesFeatures • Alternative 10.000 psi ( 689 bar ) range available. • All Valves are 100% factory tested. • NACE MR01-75 certified wetted parts available upon request. • Optional cleaning and lubrication suitable for Oxygen service. • Heat code traceability for body and bonnet
A complete pressure/temperature chart of the most common packing material is available on section 6 ( Technical ) of our catalogue.
Needle Valve
Page 5
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Sami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with union----bonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connections.ections.ections.ections. Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from –––– 73°C to + 200°C (73°C to + 200°C (73°C to + 200°C (73°C to + 200°C ( ----99°F / + 392°F )99°F / + 392°F )99°F / + 392°F )99°F / + 392°F ) Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from –––– 54°C to + 510° C (54°C to + 510° C (54°C to + 510° C (54°C to + 510° C ( ----65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )
Ordering Information Ordering Information Ordering Information Ordering Information
1000÷16001000÷16001000÷16001000÷1600 Bar stock needle valvesBar stock needle valvesBar stock needle valvesBar stock needle valves
2000÷24502000÷24502000÷24502000÷2450 TwoTwoTwoTwo----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
3000÷35503000÷35503000÷35503000÷3550 ThreeThreeThreeThree----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
4000÷43004000÷43004000÷43004000÷4300 FourFourFourFour----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
5000÷56005000÷56005000÷56005000÷5600 FiveFiveFiveFive----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
VERSIONVERSIONVERSIONVERSION
OUTLETOUTLETOUTLETOUTLET B B B B 1/4 AAAA NPT
CCCC 3/8 BBBB BSPP
DDDD 1/2 CCCC BSPT
EEEE 3/4 DDDD S.W.
FFFF Ø * EEEE B.W.
GGGG 1 FFFF O.D.
HHHH Flanged HHHH Flanged IEC 61518/B
IIII M20 IIII Flanged IEC 61518/A
LLLL Coplanar
NNNN X 1,5
VERSIONVERSIONVERSIONVERSION RATINGRATINGRATINGRATING INLETINLETINLETINLET OUTLETOUTLETOUTLETOUTLET MATERIALMATERIALMATERIALMATERIAL PACKINGPACKINGPACKINGPACKING BONNETBONNETBONNETBONNET OPTIONSOPTIONSOPTIONSOPTIONS
CCCC BBBB AAAA BBBB AAAA BBBB AAAA AAAA AAAA 1 0 0 01 0 0 01 0 0 01 0 0 0
INLETINLETINLETINLET B B B B 1/4 AAAA NPT
CCCC 3/8 BBBB BSPP
DDDD 1/2 CCCC BSPT
EEEE 3/4 DDDD S.W.
GGGG 1 FFFF O.D.
HHHH Flanged HHHH Flanged IEC 61518/B
IIII M20 IIII Flanged IEC 61518/A
LLLL Coplanar
NNNN X 1,5
FFFF Ø * EEEE B.W.
RATINGRATINGRATINGRATING
BBBB 3,000 PSI
CCCC 6,000 PSI
DDDD 10,000 PSI ****
MATERIALMATERIALMATERIALMATERIAL
BBBB Aisi 316 L
CCCC Aisi 316 Ti
DDDD Duplex F51
EEEE Super Duplex F55
FFFF Monel 400
GGGG Hastelloy C276
HHHH Inconel 625
IIII Titanium
MMMM Brass
NNNN A350-LF2
OOOO Incolloy 825
RRRR F44
SSSS Aisi 321
TTTT Aisi 317
BONNETBONNETBONNETBONNET
AAAA Std Bonnet
CCCC Mini
EEEE Extended Bonnet
PACKINGPACKINGPACKINGPACKING
AAAA PTFE
BBBB Graphoil
OPTIONSOPTIONSOPTIONSOPTIONS
DDDD Drain/vent Anti-tamper LLLL Oxygen Cleaning
EEEE Equalise+Drain Anti-tamper PPPP Panel Mounting
FFFF Isolate+Drain Anti-tamper QQQQ All bonnets locking device
GGGG Isolate+Equalise Anti-tamper RRRR Isolate Anti-tamper
HHHH Locking device on all isolates XXXX Handle bar in 316/316L
IIII All bonnets anti-tamper
**** Option D 10.000 psi not available for flanged valvesOption D 10.000 psi not available for flanged valvesOption D 10.000 psi not available for flanged valvesOption D 10.000 psi not available for flanged valves
Page 6
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1000CBABABAA1000CBABABAA1000CBABABAA1000CBABABAA 1/4 1/4 30.00 60.00 89.00 4.00 Kg. 0,48
1000CCACABAA1000CCACABAA1000CCACABAA1000CCACABAA 3/8 3/8 30.00 60.00 89.00 4.00 Kg. 0.48
1000CDADABAA1000CDADABAA1000CDADABAA1000CDADABAA 1/2 1/2 30.00 60.00 89.00 4.00 Kg. 0.48
1000CEAEABAA1000CEAEABAA1000CEAEABAA1000CEAEABAA 3/4 3/4 40.00 65.00 99.00 4.00 Kg. 0.70
1000CGAGABAA1000CGAGABAA1000CGAGABAA1000CGAGABAA 1 1 50.00 75.00 109.00 4,00 Kg. 1.10
Note: For 10,000 psi version select D as first letter of the code, i.e. 1000Note: For 10,000 psi version select D as first letter of the code, i.e. 1000Note: For 10,000 psi version select D as first letter of the code, i.e. 1000Note: For 10,000 psi version select D as first letter of the code, i.e. 1000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1000 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Page 7
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
1050 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1050CBABABAA1050CBABABAA1050CBABABAA1050CBABABAA 1/4 1/4 30.00 60.00 89.00 4.00 Kg. 0,51
1050CCACABAA1050CCACABAA1050CCACABAA1050CCACABAA 3/8 3/8 30.00 60.00 89.00 4.00 Kg. 0.51
1050CDADABAA1050CDADABAA1050CDADABAA1050CDADABAA 1/2 1/2 30.00 60.00 89.00 4.00 Kg. 0.51
1050CEAEABAA1050CEAEABAA1050CEAEABAA1050CEAEABAA 3/4 3/4 40.00 65.00 99.00 4.00 Kg. 0.73
1050CGAGABAA1050CGAGABAA1050CGAGABAA1050CGAGABAA 1 1 50.00 75.00 109.00 4,00 Kg. 1.13
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1050i.e. 1050i.e. 1050i.e. 1050DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 8
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1100CBABABAA1100CBABABAA1100CBABABAA1100CBABABAA 1/4 1/4 30.00 60.00 89.00 4.00 Kg. 0,48
1100CCACABAA1100CCACABAA1100CCACABAA1100CCACABAA 3/8 3/8 30.00 65.00 89.00 4.00 Kg. 0.48
1100CDADABAA1100CDADABAA1100CDADABAA1100CDADABAA 1/2 1/2 30.00 70.00 89.00 4.00 Kg. 0.48
1100CEAEABAA1100CEAEABAA1100CEAEABAA1100CEAEABAA 3/4 3/4 40.00 70.00 99.00 4.00 Kg. 0.70
1100CGAGABAA1100CGAGABAA1100CGAGABAA1100CGAGABAA 1 1 50.00 80.00 109.00 4,00 Kg. 1.10
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1100i.e. 1100i.e. 1100i.e. 1100DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
1100 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Page 9
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1150CBABABAA1150CBABABAA1150CBABABAA1150CBABABAA 1/4 1/4 30.00 70.00 89.00 4.00 Kg. 0,53
1150CCACABAA1150CCACABAA1150CCACABAA1150CCACABAA 3/8 3/8 30.00 70.00 89.00 4.00 Kg. 0.53
1150CDADABAA1150CDADABAA1150CDADABAA1150CDADABAA 1/2 1/2 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select D as first letter of the code, i.e. 1150Note: For 10,000 psi version select D as first letter of the code, i.e. 1150Note: For 10,000 psi version select D as first letter of the code, i.e. 1150Note: For 10,000 psi version select D as first letter of the code, i.e. 1150DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1150 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 10
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
1200 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1200CBABABAA1200CBABABAA1200CBABABAA1200CBABABAA 1/4 1/4 30.00 70.00 89.00 4.00 Kg. 0,53
1200CCACABAA1200CCACABAA1200CCACABAA1200CCACABAA 3/8 3/8 30.00 70.00 89.00 4.00 Kg. 0.53
1200CDADABAA1200CDADABAA1200CDADABAA1200CDADABAA 1/2 1/2 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1200i.e. 1200i.e. 1200i.e. 1200DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- Bleeder M8x1Bleeder M8x1Bleeder M8x1Bleeder M8x1
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 11
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1250CBABABAA1250CBABABAA1250CBABABAA1250CBABABAA 1/4 1/4 30.00 70.00 89.00 4.00 Kg. 0,53
1250CCACABAA1250CCACABAA1250CCACABAA1250CCACABAA 3/8 3/8 30.00 75.00 89.00 4.00 Kg. 0.53
1250CDADABAA1250CDADABAA1250CDADABAA1250CDADABAA 1/2 1/2 30.00 80.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1250i.e. 1250i.e. 1250i.e. 1250DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
1250 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 12
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
1300 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet
1300CBABABAA1300CBABABAA1300CBABABAA1300CBABABAA 1/4 NPT MALE INLET
3 x 1/4 NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82
1300CDADABAA1300CDADABAA1300CDADABAA1300CDADABAA 1/2 NPT MALE INLET
3 x 1/2 NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
1300CEADABAA1300CEADABAA1300CEADABAA1300CEADABAA 3/4 NPT MALE INLET
3 x 1/2 NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Multiport Gauge Valves
This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Our 1300 series needle valve is complete with standard PTFE gland packing and self centering non-rotating stem which ensures bubble tight seat shut off. Both 1/2 and 3/4 have 1/2 side ports.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 13
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet
1304CBABABAA1304CBABABAA1304CBABABAA1304CBABABAA 1/4 NPT FEMALE INLET
3 x 1/4 NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82
1304CDADABAA1304CDADABAA1304CDADABAA1304CDADABAA 1/2 NPT FEMALE INLET
3 x 1/2 NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of the code, i.e. 1304the code, i.e. 1304the code, i.e. 1304the code, i.e. 1304DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder
OrificeOrificeOrificeOrifice
4.00
4.00
1304 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Multiport Gauge Valves
This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Our 1300 series needle valve is complete with standard PTFE gland packing and self centering non-rotating stem which ensures bubble tight seat shut off. Both 1/2 and 3/4 have 1/2 side ports.
Page 14
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1400CBABABAA1400CBABABAA1400CBABABAA1400CBABABAA 1/4 1/4 30.00 70.00 89.00 4.00 Kg. 0,53
1400CCACABAA1400CCACABAA1400CCACABAA1400CCACABAA 3/8 3/8 30.00 70.00 89.00 4.00 Kg. 0.53
1400CDADABAA1400CDADABAA1400CDADABAA1400CDADABAA 1/2 1/2 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1400i.e. 1400i.e. 1400i.e. 1400DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
1400 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 15
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
1450 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1450CBABABAA1450CBABABAA1450CBABABAA1450CBABABAA 1/4 1/4 30.00 70.00 89.00 4.00 Kg. 0,56
1450CCACABAA1450CCACABAA1450CCACABAA1450CCACABAA 3/8 3/8 30.00 70.00 89.00 4.00 Kg. 0.56
1450CDADABAA1450CDADABAA1450CDADABAA1450CDADABAA 1/2 1/2 30.00 70.00 89.00 4.00 Kg. 0.56
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 1450i.e. 1450i.e. 1450i.e. 1450DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 16
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1550CBABABAA1550CBABABAA1550CBABABAA1550CBABABAA 1/4 1/4 30.00 50.00 40.00 4.00 Kg. 0,68
1550CCACABAA1550CCACABAA1550CCACABAA1550CCACABAA 3/8 3/8 30.00 50.00 40.00 4.00 Kg. 0.68
1550CDADABAA1550CDADABAA1550CDADABAA1550CDADABAA 1/2 1/2 30.00 50.00 40.00 4.00 Kg. 0.68
Note: For 10,000 psi version select D as first letter of the code, i.e. 1550Note: For 10,000 psi version select D as first letter of the code, i.e. 1550Note: For 10,000 psi version select D as first letter of the code, i.e. 1550Note: For 10,000 psi version select D as first letter of the code, i.e. 1550DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
99.00
99.00
99.00
1550 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi / 90°
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 17
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
1600 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1600CBABABAA1600CBABABAA1600CBABABAA1600CBABABAA 1/4 1/4 30.00 50.00 50.00 109.00 4.00 Kg. 0,78
1600CCACABAA1600CCACABAA1600CCACABAA1600CCACABAA 3/8 3/8 30.00 50.00 50.00 109.00 4.00 Kg. 0.78
1600CDADABAA1600CDADABAA1600CDADABAA1600CDADABAA 1/2 1/2 30.00 50.00 50.00 109.00 4.00 Kg. 0.78
Note: For 10,000 psi version select D as first letter of the co-Note: For 10,000 psi version select D as first letter of the co-Note: For 10,000 psi version select D as first letter of the co-Note: For 10,000 psi version select D as first letter of the co-de, i.e. 1600de, i.e. 1600de, i.e. 1600de, i.e. 1600DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi / 90°
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves provide total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 18
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet
2000CBABABAA2000CBABABAA2000CBABABAA2000CBABABAA 1/4 30.00 120.00 89.00 4.00 Kg. 0,87
2000CDADABAA2000CDADABAA2000CDADABAA2000CDADABAA 1/2 30.00 120.00 89.00 4.00 Kg. 0.87
Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of the code, i.e. 2000the code, i.e. 2000the code, i.e. 2000the code, i.e. 2000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-Material of construction can be supplied to meet the re-quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01quirements of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
1/4
1/2
OutletOutletOutletOutlet DDDD
89.00
89.00
2000 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets can be supplied to allow the installation both in site and on panels.
FLOWFLOWFLOWFLOW
TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 19
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
2002 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet
2002CDADABAA2002CDADABAA2002CDADABAA2002CDADABAA 1/2 1/2 30.00 120.00 148.00 4.00 Kg. 0.88
Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the code, i.e. 2002code, i.e. 2002code, i.e. 2002code, i.e. 2002DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-ments of NACE MR 01ments of NACE MR 01ments of NACE MR 01ments of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Page 20
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
2003 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2003CBABABAA2003CBABABAA2003CBABABAA2003CBABABAA 1/4 1/4 30.00 120.00 148.00 4.00 Kg. 0,88
2003CDADABAA2003CDADABAA2003CDADABAA2003CDADABAA 1/2 1/2 30.00 120.00 148.00 4.00 Kg. 0.88
Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. 2003200320032003DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Page 21
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2050CBABABAA2050CBABABAA2050CBABABAA2050CBABABAA 1/4 1/4 30.00 60.00 50.00 168.00 35.00 35.00 4.00 Kg. 0,90
2050CDADABAA2050CDADABAA2050CDADABAA2050CDADABAA 1/2 1/2 30.00 60.00 50.00 168.0 35.00 35.00 4.00 Kg. 0.90
Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the code, i.e. 2050code, i.e. 2050code, i.e. 2050code, i.e. 2050DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel material
E
F
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
2050 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Page 22
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
2052 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C FFFF Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2052CBABABAA2052CBABABAA2052CBABABAA2052CBABABAA 1/4 1/4 30.00 65.00 50.00 22.00 4.00
Kg. 0,81
2052CDADABAA2052CDADABAA2052CDADABAA2052CDADABAA 1/2 1/2 30.00 65.00 50.00 22.00 4.00
Kg. 0,81
Note: For 10,000 psi version select D as first letter of the code, i.e. 2052Note: For 10,000 psi version select D as first letter of the code, i.e. 2052Note: For 10,000 psi version select D as first letter of the code, i.e. 2052Note: For 10,000 psi version select D as first letter of the code, i.e. 2052DDDDBABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories: Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet ---- PluPluPluPlugggg the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
GGGG HHHH
30.00
27.00
30.00
27.00
LLLL MMMM
103.00
89.00
103.00
89.00
IIII
30.00
30.00
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
E
F
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Page 23
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet
2055CDADABAA2055CDADABAA2055CDADABAA2055CDADABAA 1/2 1/2 30.00 100.00 148.00 4.00 Kg. 0.87
Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the Note: For 10,000 psi version select D as first letter of the code, i.e. 2055code, i.e. 2055code, i.e. 2055code, i.e. 2055DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: see material list on page 5 • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
2055 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Page 24
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
2150 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 6.000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA 1/4 Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00
Kg. 1.35
2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA 1/2 Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00
Kg. 1.35
Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE MR 01MR 01MR 01MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 2 carbon steel screws - no. 1 plug - no. 1 PTFE gasket
Two Valve Manifolds 6.000 psi
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Page 25
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
2151 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2151CBAHHBAA2151CBAHHBAA2151CBAHHBAA2151CBAHHBAA 1/4 Flanged 32.00 63.00 70.00 40.00 18.00 55.00 41.40 188.00 124.00 4.00
Kg. 1.35
2151CDAHHBAA2151CDAHHBAA2151CDAHHBAA2151CDAHHBAA 1/2 Flanged 32.00 63.00 70.00 40.00 18.00 55.00 41.40 188.00 124.00 4.00
Kg. 1.35
Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 2 carbon steel screws - no. 1 plug - no. 1 PTFE gasket
Two Valve Manifolds 6.000 psi
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Page 26
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2250 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Two Valve Manifolds 6.000 psi & 10.000 psi / 90°
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2250CBABABAA2250CBABABAA2250CBABABAA2250CBABABAA 1/4 1/4 30.00 60.00 50.00 109.00 119.00 4.00
Kg. 1.35
2250CDADABAA2250CDADABAA2250CDADABAA2250CDADABAA 1/2 1/2 30.00 60.00 50.00 109.00 119.00 4.00
Kg. 1.35
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 2250i.e. 2250i.e. 2250i.e. 2250DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- Plug Plug Plug Plug
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 27
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2350 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Two Valve Manifolds 6.000 psi / 90°
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA 1/4 Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00
Kg. 1.28
2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA 1/2 Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00
Kg. 1.28
Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-Material of construction can be supplied to meet the require-ments of NACE MR 01ments of NACE MR 01ments of NACE MR 01ments of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: - no. 2 carbon steel screws - no. 1 plugs - no. 1 PTFE gaskets
Page 28
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2450CBABABAA2450CBABABAA2450CBABABAA2450CBABABAA 1/4 1/4 70.00 109.00 112.00 4.00 Kg. 1.28
2450CDADABAA2450CDADABAA2450CDADABAA2450CDADABAA 1/2 1/2 70.00 109.00 112.00 4.00 Kg. 1.28
Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. Note: For 10,000 psi version select D as first letter of the code, i.e. 2450245024502450DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2450 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Two Valve Manifolds 6.000 psi & 10.000 psi / Forged
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to allow the installation both in site and on panels.
Page 29
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3000 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Three Valve Manifolds 6.000
psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE----FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3000CBABABAA3000CBABABAA3000CBABABAA3000CBABABAA 1/4 1/4 30.00 104.00 50.00 217.00 54.00 22.00 4.00 Kg. 1.75
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 3000i.e. 3000i.e. 3000i.e. 3000DDDDBABABAA BABABAA BABABAA BABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
GG GG
EE EE
CC CC
FF FF
AA AA
DD DD
BB BB
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 30
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
3001 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Three Valve Manifolds 6.000
psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD E E E E ---- FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3001CDADABAA3001CDADABAA3001CDADABAA3001CDADABAA 1/2 1/2 30.00 110.00 50.00 223.00 54.00 40.00 4.00 Kg. 1.45
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 3001i.e. 3001i.e. 3001i.e. 3001DDDDDADABAA DADABAA DADABAA DADABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 31
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
3050 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3050CBAHHBAA3050CBAHHBAA3050CBAHHBAA3050CBAHHBAA 1/4 Flanged 32.00 96.00 70.00 54.00 35.00 30.00 41.40 124.00 214.00 4.00
Kg. 2.03
3050CDAHHBAA3050CDAHHBAA3050CDAHHBAA3050CDAHHBAA 1/2 Flanged 32.00 96.00 70.00 54.00 35.00 30.00 41.40 124.00 214.00 4.00
Kg. 2.03
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 PTFE gaskets
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Three Valve Manifolds 6.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 32
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3100 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3100CBABABAA3100CBABABAA3100CBABABAA3100CBABABAA 1/4 1/4 30.00 104.00 50.00 54.00 54.00 74.00 22.0 16.00 217.00 4.00
Kg. 2.03
Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of Note: For 10,000 psi version select D as first letter of the code, i.e. 3100the code, i.e. 3100the code, i.e. 3100the code, i.e. 3100DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- Plug Plug Plug Plug
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Three Valve Manifolds 6.000 psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 33
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3150 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL MMMM Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3150CBAHHBAA3150CBAHHBAA3150CBAHHBAA3150CBAHHBAA 1/4 Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 224.00 124 4.00
Kg. 2.04
3150CDAHHBAA3150CDAHHBAA3150CDAHHBAA3150CDAHHBAA 1/2 Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 224.00 124 4.00
Kg. 2.04
Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 plugs - no. 2 PTFE gaskets
Three Valve Manifolds 6.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 34
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
3160 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3160CDAHHBAA3160CDAHHBAA3160CDAHHBAA3160CDAHHBAA 1/2 Flanged 222.80 110.00 121.60 95.50 4.00
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 PTFE gaskets
EEEE
60.00
FFFF
41.3±0.2
GGGG
72.90
Three Valve Manifolds 6.000 psi
The Three Valve Manifolds, which concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
AAAA
BBBB
CCCC DDDD
EEEE
FFFF
GGGG
Page 35
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
3160 Series
Three Valve Manifolds 6.000 psi
The Three Valve Manifolds, which concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
AAAA
CCCC
DDDD
EEEE
FFFF
GGGG
BBBB
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3160CHHHHBAA3160CHHHHBAA3160CHHHHBAA3160CHHHHBAA Flanged Flanged 222.80 110.00 95.50 60.00 4.00
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 PTFE gaskets
EEEE
54±0.2
FFFF
41.3±0.2
GGGG
73
Page 36
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3250 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3250CBAHHBAA3250CBAHHBAA3250CBAHHBAA3250CBAHHBAA 1/4 Flanged 32.00 120.00 70.00 54.00 41.40 90.00 30.0 91.00 238.00 4.00
Kg. 2.39
3250CDAHHBAA3250CDAHHBAA3250CDAHHBAA3250CDAHHBAA 1/2 Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 224.00 4.00
Kg. 2.39
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 PTFE gaskets
Three Valve Manifolds 6.000
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 37
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3452 Series Three Valve Manifolds 6.000 psi / Forged
The three Valve manifolds are used with differential pressure trasmitters. In a single block the functions of interception and balancing are gathered. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA 1/4 Flanged 94.00 54.00 212.00 73.00 4.00 Kg. 2.40
3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA 1/2 Flanged 94.00 54.00 212.00 73.00 4.00 Kg. 2.40
Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE Material of construction can be supplied to meet the requirements of NACE MR 01MR 01MR 01MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 PTFE gaskets
Page 38
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
3550 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Three Valve Manifolds 6.000 psi / Coplanar
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA 1/4 Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45
3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA 1/2 Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45
Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Page 39
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5000 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi –10.000 psi
The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
EEEE
LLLL
IIII HHHH GGGG FFFF
CCCC
AAAA
BBBB
FFFF
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5000CBABABAA5000CBABABAA5000CBABABAA5000CBABABAA 1/4 1/4 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80
5000CDADABAA5000CDADABAA5000CDADABAA5000CDADABAA 1/2 1/2 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80
Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, Note: For 10,000 psi version select D as first letter of the code, i.e. 5000i.e. 5000i.e. 5000i.e. 5000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
HHHH IIII LLLL MMMM
54.00 30.00 20.00 41.00
54.00 30.00 20.00 41.00
Page 40
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5050 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
LLLL MMMM
DDDD
GGGG
IIII
HHHH
FFFF
EEEE
BBBB
CCCC
AAAA
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA 1/4 Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00
Kg. 2.80
5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA 1/2 Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00
Kg. 2.80
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 plugs - no. 2 PTFE gaskets
HHHH IIII LLLL MMMM
124.00 260.00 10.50 16.00
124.00 260.00 10.50 16.00
Page 41
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5150 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi / 90° The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA 1/4 Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70
5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA 1/2 Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70
Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 plugs - no. 2 PTFE gaskets
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 42
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
FLOWFLOWFLOWFLOW
5450 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5450CBAHHBAA5450CBAHHBAA5450CBAHHBAA5450CBAHHBAA 1/4 Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.0 124.00 260.00 4.00
Kg. 2.70
5450CDAHHBAA5450CDAHHBAA5450CDAHHBAA5450CDAHHBAA 1/2 Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.0 124.00 260.00 4.00
Kg. 2.70
Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements Material of construction can be supplied to meet the requirements of NACE MR 01of NACE MR 01of NACE MR 01of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 plugs - no. 2 PTFE gaskets
Five Valve Manifolds 6.000 psi
The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 43
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Five Valve Manifolds 6,000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
FLOWFLOWFLOWFLOW
5600 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Specifications
• Pressure up to 6,000 Psi ( 413 Bar ) • Temperature rating PTFE packing from –73°C to +200°
C ( -99°F / + 392°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5600CBAHHBAA5600CBAHHBAA5600CBAHHBAA5600CBAHHBAA 1/4 Flanged 32.00 150.00 110.00 54.00 41.40 30.00 255.0 124.00 4.00 Kg. 2.70
5600CDAHHBAA5600CDAHHBAA5600CDAHHBAA5600CDAHHBAA 1/2 Flanged 32.00 150.00 110.00 54.00 41.40 30.00 255.0 124.00 4.00 Kg. 2.70
Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: - no. 4 carbon steel screws - no. 2 plugs - no. 2 PTFE gaskets
Page 44
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Notes
Page 45
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
FEATURES
• Pressure rating: 6.000 PSI ( 414 barg ) ;
• Material: 100% AISI 316;
• Soft seated or metal seated;
• Low operating torque up to MAWP;
• Optionals:
- Lox cleaning;
- Red aluminium handle;
- Carbon steel or stainless steel handle;
- T-bar handle;
- Monel, Inconel or Hastelloy trim;
• Temperature range: -29/+200°C ( -20/+392°F ) ;
- Male/male or male/female connections;
- PEEK, Delrin or Kel-F seat.
• Blow out proof stem;
Needle valve soft seat type NV1Needle valve soft seat type NV1Needle valve soft seat type NV1Needle valve soft seat type NV1
Metering Needle Valves
SAMI ’ s soft seat needle valves are designed for natural gas applications, where precision in regulation and high quality performances are required. SAMI ’ s NV1 soft seated needle valves fully comply with ASME B31.3 and B31.1 in terms of pressure tests ( shell test and seat test ) and structural design. Our NV1 needle valves also ensure zero leakage zero leakage zero leakage zero leakage thanks to their soft seat design. The NV1 series is available in several soft seat materials ( PEEK, Kel-F, Delrin) or in metal seat, always ensuring the highest reliability in terms of seal. Its main applications include sampling system, gas chromatography, test bench, pressure regulation and pressure control from upstream to downstream.
Page 46
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Needle valve soft seat type NV1Needle valve soft seat type NV1Needle valve soft seat type NV1Needle valve soft seat type NV1
CODE CODE CODE CODE TYPE TYPE TYPE TYPE CONNECTIONS CONNECTIONS CONNECTIONS CONNECTIONS INLETINLETINLETINLET OUTLET OUTLET OUTLET OUTLET
SIZESIZESIZESIZE TYPETYPETYPETYPE SIZESIZESIZESIZE TYPETYPETYPETYPE
NV1FFBABABVK NV1 FEM-FEM 1/4 NPT 1/4 NPT AISI 316
NV1FFBABABVM NV1 FEM-FEM 1/4 NPT 1/4 NPT AISI 316
MATERIALMATERIALMATERIALMATERIAL PACKINGPACKINGPACKINGPACKING
VITON
VITON
SEATSEATSEATSEAT
KEL-F
METAL
BOREBOREBOREBORE
3mm
3mm
* Optional seat material: DELRIN/PEEK
Metering Needle Valves
Page 47
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
FEATURES
• Temperature range: -20/+200°C ( -4/+392°F )
• Valve opening visual indicator;
• Tested at 1,5 times the design pressure;
• 100% stainless steel;
• Smooth operation up to 5.000 PSI ( 345 barg ) ;
• Excellent manoeuvrability at MAWP.
• Position indicators on the handle;
Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV ---- 1/41/41/41/4
Cartridge Needle Valves
SAMI ’ s cartridge metering needle valves are designed for hydraulic application especially with high pressure and viscous fluids. SAMI ’ s cartridge valve allows great accuracy in the regulation of fluid, thanks to the shape of its needle and the openings of the valve. As standard, the wetted parts of the valve are 100% made of stainless steel to prevent corrosion and to support heavy duty application. The handle material is anodized aluminium. All our cartridge needle series include coloured indicators on the stem which allow the operator to identify immediately the exact percentage of opening of the valve. SAMI ’ s cartridge valves have been functionally tested up to the maximum allowable working pressure with excellent results in manoeuvrability and internal sealing.
Page 48
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Cartridge Needle Valves
Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV Cartridge metering needle valve type CMV ---- 1/41/41/41/4
CODECODECODECODE SIZESIZESIZESIZE SEALSSEALSSEALSSEALS STEM PLUGSTEM PLUGSTEM PLUGSTEM PLUG MATERIALMATERIALMATERIALMATERIAL
CMVANSA 1/4 NBR STANDARD 30° AISI 316
RATINGRATINGRATINGRATING
5000 PSI
BOREBOREBOREBORE
4.6 mm
Seat machining for Cartridge ValveSeat machining for Cartridge ValveSeat machining for Cartridge ValveSeat machining for Cartridge Valve
Page 49
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Notes
Page 50
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Notes
Page 51
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Special Items
15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed
DistributorsDistributorsDistributorsDistributors
Double Block & BleedDouble Block & BleedDouble Block & BleedDouble Block & Bleed Safety systemsSafety systemsSafety systemsSafety systems
Distribution and control panelDistribution and control panelDistribution and control panelDistribution and control panel
Page 52
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Special Items
Socket Weld VersionSocket Weld VersionSocket Weld VersionSocket Weld Version
DistributorsDistributorsDistributorsDistributors
Flanged ValvesFlanged ValvesFlanged ValvesFlanged Valves O.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle Valves
Flanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle Valves
Page 53
Rev. 1Rev. 1Rev. 1Rev. 1---- 2017201720172017
Brackets
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----06060606----01010101
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----11111111----01010101
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----10101010----01010101
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----08080808----01010101
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----04040404----01010101
Five Valve ManifoldsFive Valve ManifoldsFive Valve ManifoldsFive Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----04040404----01010101
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----07070707----01010101
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540Model: A0540Model: A0540Model: A0540----07070707----01010101
CODE (MATERIAL 316L) MOUNTED ON MANIFOLDS:
A0540-04-01 VERT. BRACKET KIT FOR MANIFOLDS 3002-3050-3150-3151-3152-5000-5050-5051-5052
A0540-06-01 BRACKET KIT FOR MANIFOLDS 2015-2017
A0540-07-01 HORIZ. BRACKET KIT FOR MANIFOLDS 3002-3050-3150-3151-3152-5000-5050-5051-5052
A0540-08-01 BRACKET KIT FOR MANIFOLD 2150 (M2L)
A0540-09-01 BRACKET KIT FOR MANIFOLD 3451
A0540-10-01 BRACKET KIT FOR MANIFOLD 2052
A0540-11-01 BRACKET KIT FOR MANIFOLD 2050
A0540-12-01 BRACKET KIT FOR MANIFOLDS 3001-2015-2017
A0540-17-01 BRACKET KIT FOR MANIFOLD 2152
A0540-18-01 BRACKET KIT FOR MANIFOLD 2052
A0540-22-01 BRACKET KIT FOR MANIFOLDS 2161-2162
A0540-23-01 BRACKET KIT FOR MANIFOLDS 2163-3156-5203
A0540-24-01 BRACKET KIT FOR MANIFOLDS 5201
A0540-30-01 HORIZ. BRACKET KIT FOR FORGED 5 VALVE MANIFOLD
A0540-31-01 BRACKET KIT FOR MANIFOLD 5301
A0540-32-01 HORIZ. BRACKET KIT FOR FORGED 2 VALVE MANIFOLD
A0540-33-01 BRACKET KIT FOR MANIFOLD 2015
A0540-34-01 BRACKET KIT FOR MANIFOLD 5204
Page 54
Rev. 1 Rev. 1 Rev. 1 Rev. 1 ---- 2017201720172017
Notes